Determination of domoic acid in shellfish extracted by molecularly imprinted polymers: Other Techniques

Online highly selective recognition of domoic acid by an aptamer@MOFs affinity monolithic column coupled with HPLC for shellfish safety monitoring

Enabling cost-effective safety monitoring of shellfish is an important measure for the healthy development of the coastal marine economy. Herein, a new aptamer@metal-organic framework (MOF)-functionalized affinity monolithic column was proposed and applied in selective in-tube solid-phase microextraction (IT-SPME) coupled with HPLC for the accurate recognition of domoic acid (DA) in shellfish. Using a surface engineering strategy, ZIF-8 MOF was grown in situ inside the poly(epoxy-MA-co-POSS-MA) hybrid monolith. A high BET surface area and abundant metal reactive sites of the MOF framework were obtained for anchoring massive aptamers with terminal-modified phosphate groups. Various characterizations, such as SEM, elemental mapping, XRD, and BET, were performed, and the affinity performance was also studied. The presence of a massive amount of aptamers with a super coverage density of 3140 μmol L-1 bound on ZIF-8 MOF activated a high-performance bionic-affinity interface, and perfect specificity was exhibited with little interference of tissue matrixes, thus assuring the highly selective capture of DA from the complex matrixes. Under the optimal conditions, DA toxins in shellfish were detected with the limit of detection (LOD) of 7.0 ng mL-1 (equivalent to 14.0 μg kg-1), representing a 5-28 fold enhancement in detection sensitivity over traditional SPE or MIP adsorbents reported previously. The recoveries of fortified mussel and clam samples were achieved as 91.8 ± 1.2%-94.1 ± 1.9% (n = 3) and 91.2 ± 1.1%-94.5 ± 3.6% (n = 3), respectively. This work sheds light on a cost-effective method for online selective IT-SPME and the accurate monitoring of DA toxins using an aptamer@MOF-mediated affinity monolith system coupled with the inexpensive HPLC-UV technique.

Rapid electrochemical detection of domoic acid based on polydopamine/reduced graphene oxide coupled with in-situ imprinted polyacrylamide

Domoic acid, namely amnesic shellfish toxin, is a highly neurotoxic substance to marine animals and humankind. To reduce the incidence of poisoning accidents, the exploitation of specific and rapid detection method for domoic acid monitoring is highly required. Herein, an electrochemical molecularly imprinted polymer (MIP) sensor based on polydopamine-reduced graphene oxide/polyacrylamide composite (PDA-rGO/PAM) was constructed successfully to detect domoic acid. The domoic acid molecule could be recognized in imprinted cavities of PAM reversibly through hydrogen bonding. PDA-rGO promoted the loading capacity of PAM and improved the charge transfer rate, which amplified the electrical signal response of the MIP sensor. The screen-printed electrode (SPE) modified with PDA-rGO/PAM displayed satisfactory response toward toxin contaminated sample at a linear range from 1 to 600 nM and a low detection limit of 0.31 nM, demonstrating the prospective application of the transducer as a portable sensing platform for the on-site detection of hazardous marine biotoxin. Moreover, benefiting from the superior specificity and stability of MIP, the fabricated sensor could be utilized to detect the domoic acid content in mussel extracts directly without complex pretreatment operation.

Review on molecular imprinting technology and its application in pre-treatment and detection of marine organic pollutants

Molecular imprinting technology (MIT) has been considered as an attractive method to produce artificial receptors with the memory of size, shape and functional groups of the templates and has become an emerging technique with the potential in various fields due to recognitive specificity, high efficient selectivity and mechanical stability, which can effectively remove background interference and is suitable for the pre-treatment and analysis of trace level substances in complex matrix samples. Nearly 100 papers about the application of MIT in the detection of marine pollutants were found through Science Citation Index Expanded (SCIE). On this basis, combined with the application of MIT in other fields, the pre-treatment process of marine environmental samples was summarized and the potential of four types of different molecularly imprinted materials in the pre-treatment and detection of marine organic pollutants (including antibiotics, triazines, organic dyes, hormones and shellfish toxins) samples was evaluated, which provides the innovative configurations and progressive applications for the analysis of marine samples, and also highlights future trends and perspectives in the emerging research field.

Immunoaffinity Extraction and Alternative Approaches for the Analysis of Toxins in Environmental, Food or Biological Matrices

The evolution of instrumentation in terms of separation and detection allowed a real improvement of the sensitivity and analysis time. However, the analysis of ultra-traces of toxins in complex samples requires often a step of purification and even preconcentration before their chromatographic analysis. Therefore, immunoaffinity sorbents based on specific antibodies thus providing a molecular recognition mechanism appear as powerful tools for the selective extraction of a target molecule and its structural analogs to obtain more reliable and sensitive quantitative analysis in environmental, food or biological matrices. This review focuses on immunosorbents that have proven their efficiency in selectively extracting various types of toxins of various sizes (from small mycotoxins to large proteins) and physicochemical properties. Immunosorbents are now commercially available, and their use has been validated for numerous applications. The wide variety of samples to be analyzed, as well as extraction conditions and their impact on extraction yields, is discussed. In addition, their potential for purification and thus suppression of matrix effects, responsible for quantification problems especially in mass spectrometry, is presented. Due to their similar properties, molecularly imprinted polymers and aptamer-based sorbents that appear to be an interesting alternative to antibodies are also briefly addressed by comparing their potential with that of immunosorbents.

Rapid extraction of domoic acid by a magnetic molecularly imprinted silica before HPLC measurement

A magnetic molecularly imprinted silica solid was obtained by sol-gel polymerization for the separation of domoic acid. The solid showed rapid adsorption kinetics with an adsorption equilibrium time of 5 min. The solid showed affinity to domoic acid under the interference of tryptophan and could be repeatedly used for 5 times at least. The solid was used as a solid-phase-extraction sorbent for the extraction of domoic acid from clam samples before measurement with liquid chromatography. The detection limit of 0.20 mg kg-1 was lower than the allowable limits in several countries or areas. The recoveries in the spiked samples were 88% approximately.

Applying molecular modelling and experimental studies to develop molecularly imprinted polymer for domoic acid enrichment from both seawater and shellfish

A highly selective sample cleanup method using molecularly imprinted polymers (MIP) was developed for the enrichment of domoic acid (DA, an amnesic shellfish toxin) from both seawater and shellfish samples. Molecular modelling was firstly applied to screening a suitable functional monomer and optimize the polymer preparation. Theoretical results were in a good agreement with those of the experimental studies. MIP was prepared by precipitation polymerization using 1, 3, 5-pentanetricarboxylic acid and 2-(Trifluoromethyl)acrylic acid as the template molecule and functional monomer, respectively. The morphology and molecular structure of MIP were revealed by scanning electron microscope (SEM) and fourier transform infrared spectroscopy (FTIR), respectively. The obtained MIP showed high affinity and selectivity for DA with binding site numbers of 0.875 mg g^-1 and an average association constant of 0.219 L mg^-1 evaluated by adsorption experiments. The developed molecularly imprinted solid-phase extraction (MISPE) column achieved satisfied adsorption rate (99.2%) and recovery (71.2%) with relative standard deviation (RSD) less than 1.0%, which is more stable and precise than the C₁₈, SAX, and HLB columns. Finally, the determination method for DA in both seawater and shellfish samples was then successfully established and validated using MISPE coupled with high-performance liquid chromatography-ultraviolet detection (HPLC-UV). The method limit of detection was 20 μg L^-1 and 50 μg kg^-1 for seawater and shellfish, respectively. This study demonstrates that molecular modelling is a useful tool to screening functional monomer and optimize polymer preparation. It provides an innovative polymer for trace DA monitoring in both seawater and shellfish.