Imaging of small vessels using photoacoustics: An in vivo study

Introduction to Infrared and Raman-Based Biomedical Molecular Imaging and Comparison with Other Modalities

Molecular imaging has rapidly developed to answer the need of image contrast in medical diagnostic imaging to go beyond morphological information to include functional differences in imaged tissues at the cellular and molecular levels. Vibrational (infrared (IR) and Raman) imaging has rapidly emerged among the molecular imaging modalities available, due to its label-free combination of high spatial resolution with chemical specificity. This article presents the physical basis of vibrational spectroscopy and imaging, followed by illustration of their preclinical in vitro applications in body fluids and cells, ex vivo tissues and in vivo small animals and ending with a brief discussion of their clinical translation. After comparing the advantages and disadvantages of IR/Raman imaging with the other main modalities, such as magnetic resonance imaging (MRI), computed tomography (CT), positron emission tomography/single-photon emission-computed tomography (PET/SPECT), ultrasound (US) and photoacoustic imaging (PAI), the design of multimodal probes combining vibrational imaging with other modalities is discussed, illustrated by some preclinical proof-of-concept examples.

Photoacoustic pulse wave forming along the rotation axis of an ellipsoid droplet: a geometric calculation study

A geometric calculation method is developed to study the pulsed photoacoustic wave forming of an arbitrarily shaped droplet. It is found that for an ellipsoid droplet, either a prolate ellipsoid or an oblate ellipsoid, strict analytical formulas for describing the wave profile developed along the rotation axis can be derived. The results show intriguing differences compared to those of a sphere droplet in terms of the multiple geometric parameters being in effect, the pulse wave profile variant, and the existing of unlimited points of infinite tensile pressure.

A molecular imaging primer: modalities, imaging agents, and applications

Molecular imaging is revolutionizing the way we study the inner workings of the human body, diagnose diseases, approach drug design, and assess therapies. The field as a whole is making possible the visualization of complex biochemical processes involved in normal physiology and disease states, in real time, in living cells, tissues, and intact subjects. In this review, we focus specifically on molecular imaging of intact living subjects. We provide a basic primer for those who are new to molecular imaging, and a resource for those involved in the field. We begin by describing classical molecular imaging techniques together with their key strengths and limitations, after which we introduce some of the latest emerging imaging modalities. We provide an overview of the main classes of molecular imaging agents (i.e., small molecules, peptides, aptamers, engineered proteins, and nanoparticles) and cite examples of how molecular imaging is being applied in oncology, neuroscience, cardiology, gene therapy, cell tracking, and theranostics (therapy combined with diagnostics). A step-by-step guide to answering biological and/or clinical questions using the tools of molecular imaging is also provided. We conclude by discussing the grand challenges of the field, its future directions, and enormous potential for further impacting how we approach research and medicine.

Molecular photoacoustic imaging of angiogenesis with integrin-targeted gold nanobeacons

Photoacoustic tomography (PAT) combines optical and acoustic imaging to generate high-resolution images of microvasculature. Inherent sensitivity to hemoglobin permits PAT to image blood vessels but precludes discriminating neovascular from maturing microvasculature. α(v)β(3)-Gold nanobeacons (α(v)β(3)-GNBs) for neovascular molecular PAT were developed, characterized, and demonstrated in vivo using a mouse Matrigel-plug model of angiogenesis. PAT results were microscopically corroborated with fluorescent α(v)β(3)-GNB localization and supporting immunohistology in Rag1(tm1Mom) Tg(Tie-2-lacZ)182-Sato mice. α(v)β(3)-GNBs (154 nm) had 10-fold greater contrast than blood on an equivolume basis when imaged at 740 nm to 810 nm in blood. The lowest detectable concentration in buffer was 290 nM at 780 nm. Noninvasive PAT of angiogenesis using a 10-MHz ultrasound receiver with α(v)β(3)-GNBs produced a 600% increase in signal in a Matrigel-plug mouse model relative to the inherent hemoglobin contrast pretreatment. In addition to increasing the contrast of neovessels detected at baseline, α(v)β(3)-GNBs allowed visualization of numerous angiogenic sprouts and bridges that were undetectable before contrast injection. Competitive inhibition of α(v)β(3)-GNBs with α(v)β(3)-NBs (no gold particles) almost completely blocked contrast enhancement to pretreatment levels, similar to the signal from animals receiving saline only. Consistent with other studies, nontargeted GNBs passively accumulated in the tortuous neovascular but provided less than half of the contrast enhancement of the targeted agent. Microscopic studies revealed that the vascular constrained, rhodamine-labeled α(v)β(3)-GNBs homed specifically to immature neovasculature (PECAM(+), Tie-2(-)) along the immediate tumor periphery, but not to nearby mature microvasculature (PECAM(+), Tie-2(+)). The combination of PAT and α(v)β(3)-GNBs offered sensitive and specific discrimination and quantification of angiogenesis in vivo, which may be clinically applicable to a variety of highly prevalent diseases, including cancer and cardiovascular disease.

Frequency domain photothermoacoustic signal amplitude dependence on the optical properties of water: turbid polyvinyl chloride-plastisol system

Photoacoustic (more precisely, photothermoacoustic) signals generated by the absorption of photons can be related to the incident laser fluence rate. The dependence of frequency domain photoacoustic (FD-PA) signals on the optical absorption coefficient (micro(a)) and the effective attenuation coefficient (micro(eff)) of a turbid medium [polyvinyl chloride-plastisol (PVCP)] with tissuelike optical properties was measured, and empirical relationships between these optical properties and the photoacoustic (PA) signal amplitude and the laser fluence rate were derived for the water (PVCP system with and without optical scatterers). The measured relationships between these sample optical properties and the PA signal amplitude were found to be linear, consistent with FD-PA theory: micro(a)=a(A/Phi)-b and micro(eff)=c(A/Phi)+d, where Phi is the laser fluence, A is the FD-PA amplitude, and a, ...,d are empirical coefficients determined from the experiment using linear frequency-swept modulation and a lock-in heterodyne detection technique. This quantitative technique can easily be used to measure the optical properties of general turbid media using FD-PAs.

Photoacoustic imaging of biological tissue with intensity-modulated continuous-wave laser

We build a photoacoustic imaging system using an intensity-modulated continuous-wave laser source, which is an inexpensive, compact, and durable 120-mW laser diode. The goal is to significantly reduce the costs and sizes of photoacoustic imaging systems. By using a bowl-shaped piezoelectric transducer, whose numerical aperture is 0.85 and resonance frequency is 2.45 MHz, we image biological tissues with a lateral resolution of 0.45 mm, an axial resolution of 1 mm, and an SNR as high as 43 dB.

In vivo photoacoustic imaging of blood vessels with a pulsed laser diode

Photoacoustic imaging is a hybrid imaging modality that is based on the detection of acoustic waves generated by absorption of pulsed light by tissue chromophores such as hemoglobin in blood. For this technique, usually large and costly Q-switched Nd:YAG lasers are used. These lasers provide a pulse energy of at least several milliJoules. In search of alternative light sources, we investigated the use of a small and compact pulsed laser diode to image blood vessels. We proved that a pulsed laser diode can be applied for imaging blood vessels in vivo.

Two-dimensional quantitative photoacoustic image reconstruction of absorption distributions in scattering media by use of a simple iterative method

Photoacoustic imaging is a noninvasive biomedical imaging modality for visualizing the internal structure and function of soft tissues. Conventionally, an image proportional to the absorbed optical energy is reconstructed from measurements of light-induced acoustic emissions. We describe a simple iterative algorithm to recover the distribution of optical absorption coefficients from the image of the absorbed optical energy. The algorithm, which incorporates a diffusion-based finite-element model of light transport, converges quickly onto an accurate estimate of the distribution of absolute absorption coefficients. Two-dimensional examples with physiologically realistic optical properties are shown. The ability to recover optical properties (which directly reflect tissue physiology) could enhance photoacoustic imaging techniques, particularly methods based on spectroscopic analysis of chromophores.

Photoacoustic imaging of valves in superficial veins

BACKGROUND AND OBJECTIVES

In intravenous access to veins there is a risk of puncturing venous valves or blocking of the catheter by the valves. Therefore, we have investigated whether and how photoacoustic imaging (PAI), which visualizes the lumen of blood vessels, can be used to detect these valves.

STUDY DESIGN/MATERIALS AND METHODS

Venous valves in superficial veins on the dorsal side of the hand of human volunteers were located by palpation and visual inspection. Next, this location was imaged using PAI.

RESULTS

In 16 of 21 human volunteers venous valves that were found by palpation could be observed by PAI as local discontinuities in the imaged vessel. From these images, four characteristic features by which venous valves can be recognized in photoacoustic images were identified.

CONCLUSIONS

PAI has the potential to be applied in the detection of venous valves.