PeptoSomes for Vaccination: Combining Antigen and Adjuvant in Polypept(o)ide-Based Polymersomes

Utility of Triethyloxonium Tetrafluoroborate for Chloride Removal during Sarcosine N-Carboxyanhydride Synthesis: Improving NCA Purity

The clinical translation of polysarcosine (pSar) as polyethylene glycol (PEG) replacement in the development of novel nanomedicines creates a broad demand of polymeric material in high-quality making high-purity sarcosine N-carboxyanhydride (Sar-NCA) as monomer for its production inevitable. Within this report, we present the use of triethyloxonium tetrafluoroborate in Sar-NCA synthesis with focus on amino acid and chloride impurities to avoid the sublimation of Sar-NCAs. With a view towards upscaling into kilogram or ton scale, a new methodology of monomer purification is introduced by utilizing the Meerwein's Salt triethyloxonium tetrafluoroborate to remove chloride impurities by covalent binding and converting chloride ions into volatile products within a single step. The novel straightforward technique enables access to monomers with significantly reduced chloride content (<100 ppm) compared to Sar-NCA derived by synthesis or sublimation. The derived monomers enable the controlled-living polymerization in DMF and provide access to pSar polymers with Poisson-like molecular weight distribution within a high range of chain lengths (Xn 25-200). In conclusion, the reported method can be easily applied to Sar-NCA synthesis or purification of commercially available pSar-NCAs and eases access to well-defined hetero-telechelic pSar polymers.

Preparation of Nanosized Pharmaceutical Formulations by Dual Centrifugation

Dual centrifugation (DC) is an innovative in-vial homogenization and in-vial nanomilling technique that has been in use for the preparation of liposomes for more than one decade. Since then, DC has continuously been developed for preparing various liposomes and other lipid nanoparticles including emulsions and solid lipid nanoparticles (SLNs) as well as polymersomes and nanocrystals. Improvements in equipment technology have been achieved over the past decade, so that DC is now on its way to becoming the quasi-standard for the simple, fast, and aseptic production of lipid nanoparticles and nanocrystals in small and medium batch sizes, including the possibility of simple and fast formulation screening or bedside preparations of therapeutic nanoparticles. More than 68 publications in which DC was used to produce nanoparticles have appeared since then, justifying an initial review of the use of DC for pharmaceutical nanotechnology.

Biomaterial-based delivery platforms for transdermal immunotherapy

Nowadays, immunotherapy is one of the most essential treatments for various diseases and a broad spectrum of disorders are assumed to be treated by altering the function of the immune system. For this reason, immunotherapy has attracted a great deal of attention and numerous studies on different approaches for immunotherapies have been investigated, using multiple biomaterials and carriers, from nanoparticles (NPs) to microneedles (MNs). In this review, the immunotherapy strategies, biomaterials, devices, and diseases supposed to be treated by immunotherapeutic strategies are reviewed. Several transdermal therapeutic methods, including semisolids, skin patches, chemical, and physical skin penetration enhancers, are discussed. MNs are the most frequent devices implemented in transdermal immunotherapy of cancers (e.g., melanoma, squamous cell carcinoma, cervical, and breast cancer), infectious (e.g., COVID-19), allergic and autoimmune disorders (e.g., Duchenne's muscular dystrophy and Pollinosis). The biomaterials used in transdermal immunotherapy vary in shape, size, and sensitivity to external stimuli (e.g., magnetic field, photo, redox, pH, thermal, and even multi-stimuli-responsive) were reported. Correspondingly, vesicle-based NPs, including niosomes, transferosomes, ethosomes, microemulsions, transfersomes, and exosomes, are also discussed. In addition, transdermal immunotherapy using vaccines has been reviewed for Ebola, Neisseria gonorrhoeae, Hepatitis B virus, Influenza virus, respiratory syncytial virus, Hand-foot-and-mouth disease, and Tetanus.

Improving aqueous solubility of paclitaxel with polysarcosine-b-poly(γ-benzyl glutamate) nanoparticles

New stealth amphiphilic copolymers based on polysarcosine (PSar) rather than poly(ethylene glycol) (PEG) have gained more attention for their use as excipients in nanomedicine. In this study, several polysarcosine-b-poly(γ-benzyl glutamate) (PSar-b-PGluOBn) block copolymers were synthesized by ring opening polymerization (ROP) of the respective N-carboxyanhydrides (NCAs) and were characterized by Fourier-transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H NMR) and size-exclusion chromatography (SEC). Copolymers had different PGluOBn block configuration (racemic L/D, pure L or pure D), degrees of polymerization of PSar between 28 and 76 and PGluOBn between 9 and 93, molar masses (M_n) between 5.0 and 24.6 kg.mol^-1 and dispersities (Đ) lower than 1.4. Nanoparticles of PSar-b-PGluOBn loaded with paclitaxel (PTX), a hydrophobic anti-cancer drug, were obtained by nanoprecipitation. Their hydrodynamic diameter (D_h) ranged from 27 to 118 nm with polydispersity indexes (PDI) between 0.01 and 0.20, as determined by dynamic light scattering (DLS). Their morphology was more spherical for copolymers with a racemic L/D PGluOBn block configuration synthesized at 5 °C. PTX loading efficiency was between 63 and 92 % and loading contents between 7 and 15 %. Using PSar-b-PGluOBn copolymers as excipients, PTX apparent water-solubility was significantly improved by a factor up to 6600 to 660 µg.mL^-1.

Bimodal Targeting of Human Leukocytes by Fc- and CpG-Decorated Polymersomes to Tune Immune Induction

The use of well-defined nanovesicles composed of amphiphilic block copolymers (polymersomes) for delivery of adjuvants and antigens is a promising strategy for vaccine development. However, the potency of nanoparticle vaccines depends on efficient interaction with and activation of cells involved in antigen presentation, which can be achieved by targeting cellular receptors. Here, we showed that the Fc fragment display on the polymersome surface resulted in markedly improved interactions with granulocytes, monocytes, and NK cells, while for “naked” polymersomes, virtually no binding to leukocytes was observed. Moreover, CpG-decorated polymersomes were found to also interact with T and/or B cells. Interestingly, whole blood stimulations with Fc fragment and CpG-decorated polymersomes induced interleukin (IL)-6, IL-8, and TNF-α production, while naked polymersomes did not induce any cytokine production. In conclusion, specific immune induction by polymersomes can be controlled using bimodal targeting of different immune receptors, which is an essential feature for targeted vaccine delivery.

Polymeric nanoparticle vaccines to combat emerging and pandemic threats

Subunit vaccines are more advantageous than live attenuated vaccines in terms of safety and scale-up manufacture. However, this often comes as a trade-off to their efficacy. Over the years, polymeric nanoparticles have been developed to improve vaccine potency, by engineering their physicochemical properties to incorporate multiple immunological cues to mimic pathogenic microbes and viruses. This review covers recent advances in polymeric nanostructures developed toward particulate vaccines. It focuses on the impact of microbe mimicry (e.g. size, charge, hydrophobicity, and surface chemistry) on modulation of the nanoparticles’ delivery, trafficking, and targeting antigen-presenting cells to elicit potent humoral and cellular immune responses. This review also provides up-to-date progresses on rational designs of a wide variety of polymeric nanostructures that are loaded with antigens and immunostimulatory molecules, ranging from particles, micelles, nanogels, and polymersomes to advanced core-shell structures where polymeric particles are coated with lipids, cell membranes, or proteins.

Materials for Immunotherapy

Breakthroughs in materials engineering have accelerated the progress of immunotherapy in preclinical studies. The interplay of chemistry and materials has resulted in improved loading, targeting, and release of immunomodulatory agents. An overview of the materials that are used to enable or improve the success of immunotherapies in preclinical studies is presented, from immunosuppressive to proinflammatory strategies, with particular emphasis on technologies poised for clinical translation. The materials are organized based on their characteristic length scale, whereby the enabling feature of each technology is organized by the structure of that material. For example, the mechanisms by which i) nanoscale materials can improve targeting and infiltration of immunomodulatory payloads into tissues and cells, ii) microscale materials can facilitate cell-mediated transport and serve as artificial antigen-presenting cells, and iii) macroscale materials can form the basis of artificial microenvironments to promote cell infiltration and reprogramming are discussed. As a step toward establishing a set of design rules for future immunotherapies, materials that intrinsically activate or suppress the immune system are reviewed. Finally, a brief outlook on the trajectory of these systems and how they may be improved to address unsolved challenges in cancer, infectious diseases, and autoimmunity is presented.

Tetrazine- and trans-cyclooctene-functionalised polypept(o)ides for fast bioorthogonal tetrazine ligation

Tetrazine- and trans-cyclooctene-functionalised polypeptides and polypetoids were prepared by ring-opening polymerisation of N-carboxyanhydrides using the respective functional initiators and shown to react in fast bioorthogonal tetrazine ligations.

Nucleic acids presenting polymer nanomaterials as vaccine adjuvants

Most vaccines developed today include only the antigens that best stimulate the immune system rather than the entire virus or microbe, which makes vaccine production and use safer and easier, though they lack potency to induce acceptable immunity and long-term protection. The incorporation of additional immune stimulating components, named adjuvants, is required to generate a strong protective immune response. Nucleic acids (DNA and RNA) and their synthetic analogs are promising candidates as vaccine adjuvants activating Toll-like receptors (TLRs). Additionally, in the last few years several nanocarriers have emerged as platforms for targeted co-delivery of antigens and adjuvants. In this review, we focus on the recent developments in polymer nanomaterials presenting nucleic acids as vaccine adjuvants. We aim to compare the effectiveness of the various classes of polymers in immune modulating materials (nanoparticles, dendrimers, single-chain particles, nanogels, polymersomes and DNA-based architectures). In particular, we address the critical role of parameters such as size, shape, complexation and release of TLR ligands, cellular uptake, stability, toxicity and potential importance of spatial control in ligand presentation.

Self-assembled amphiphilic copolymers as dual delivery system for immunotherapy

Subunit vaccines using recombinant antigens appear as the privileged vaccination technology for safety reasons but still require the development of carriers/adjuvants ensuring optimal immunogenicity and efficacy. Micelles from self-assembled amphiphilic copolymers have recently emerged as highly relevant and promising candidates owing to their ease of preparation, low size (entering in lymphatic capillaries for reaching lymph nodes), size/surface tunability and chemical versatility enabling introduction of stimuli (e.g. pH) responsive features and biofunctionalization with dedicated molecules. In particular, research efforts have increasingly focused on dendritic cells (DCs) targeting and activation by co-delivering (with antigen) ligands of pattern recognition receptors (PRRs, e.g. toll-like receptors). Such strategy has appeared as one of the most effective for eliciting CD 8+ T-cell response, which is crucial in the eradication of tumors and numerous infectious diseases. In this short review, we highlight the recent advances in such micelle-based carriers in subunit vaccination and how their precise engineering can be a strong asset for guiding and controlling immune responses.

Protection against Neurodegeneration in the Hippocampus Using Sialic Acid- and 5-HT-Moduline-Conjugated Lipopolymer Nanoparticles

Significant involvement of oxidative stress in the brain can develop Alzheimer's disease (AD); however, a great number of clinical trials explains the limited success of antioxidant therapy in dealing with this neurodegenerative disease. Here, we established a lipopolymer system of poly(lactide-co-glycolide) (PLGA) nanoparticles (NPs) incorporated with phosphatidic acid (PA) and modified with sialic acid (SA) and 5-hydroxytryptamine-moduline (5HTM) to improve quercetin (QU) activity against oxidative stress induced by amyloid-β (Aβ) deposits. Morphological studies revealed a uniform exterior of QU-SA-5HTM-PA-PLGA NPs with a spherical structure and enhanced aggregation with inclusion of PA in the formulation. A better brain-targeted delivery of the lipopolymeric NPs was verified from the high blood-brain barrier (BBB) permeability of QU through strong interactions of surface SA and 5HTM with O-linked N-acetylglucosamine and 5-HT1B receptors, respectively. Immunofluorescence staining images also supported QU-SA-5HTM-PA-PLGA NPs to traverse the microvessels of AD rat brain. Western blot analysis showed that QU-loaded PA-PLGA NPs suppressed caspase-3 expression. The ability of the nanocarriers to recognize Aβ fibrils was demonstrated from the reduced senile plaque formation and the attenuated acetylcholinesterase and malondialdehyde activity in the hippocampus. Hence, the medication of QU-SA-5HTM-PA-PLGA NPs can facilitate the BBB penetration and prevent Aβ accumulation, lipid peroxidation, and neuronal apoptosis for the AD management.