Advancement in the Biomedical Applications of the (Nano)gel Structures Based on Particular Polysaccharides

Physicochemical Properties, Antioxidant Activity, and Flavor Profile of Strawberry Fruit-Based Novel Drinking Jelly Made with Gracilaria fisheri Seaweed as a Gelling Agent at Varying Concentrations

Gracilaria fisheri (GF) is a red seaweed that is widely found in Southeast Asia and has gained attention for its potential bioactive compounds and versatile applications in food products. This study explored the potential of GF as a natural gelling agent in the development of sustainable strawberry-based drinking jelly. By utilizing GF at varying concentrations (0.2 (S1), 0.4 (S2), 0.6 (S3), 0.8 (S4), and 1.0% (S5)), the impact on the physicochemical, textural, phytochemical, and flavor profiles of the strawberry concentrate-based drinking jelly was examined. The results demonstrated that GF concentration significantly affected the color characteristics, structural development, and flavor profiles of the drinking jelly samples. Increasing GF levels progressively enhanced the lightness (L*) and redness (a*) values while reducing the yellowness (b*), with optimal visual appeal achieved in the S4 samples compared to others. Microscopical observations revealed that gel matrix development improved with GF concentrations up to 0.8% (S4), transitioning from a sparse, liquid-like structure at lower levels to a compact, over-gelated network at 1.0% (S5). Physicochemical parameters, including pH, total soluble solid (TSS), and TSS/titratable acidity (TA) ratios, increased with GF levels, contributing to a sweeter, less acidic product, while water activity (aw) decreased, enhancing jelly stability. Viscosity and sulfate content increased significantly with GF concentration, indicating improved gel strength but reduced fluidity. Phytochemical analysis revealed that ascorbic acid (AsA) and total phenolic content (TPC) decreased progressively with higher GF levels, leading to a reduction in antioxidant activity (DPPH and ABTS). Volatile compound analysis identified alcohols, esters, and aldehydes as dominant contributors to the flavor profile. 1-Octanol (waxy, citrus-like) and methyl anthranilate (grape-like, sweet) increased substantially, while minor groups such as terpenoids and phenolic compounds contributed floral and woody notes. The findings suggest that S4 samples strike the optimal balance between texture, color, flavor, and antioxidant properties, achieving a cohesive, visually appealing, and flavorful drinking jelly suitable for commercial applications.

Exploring the Use of Water-Extracted Flaxseed Hydrocolloids in Three-Dimensional Cell Culture

Plant-derived hydrocolloids offer promising prospects in biomedical applications. Among these, Flaxseed hydrocolloid (FSH) can form a soft, elastic, and biocompatible hydrocolloid with tunable viscosity and superior swelling capacity, making it an attractive scaffold. This study introduces a green extraction method for FSH, employing a single-step aqueous extraction process and fabrication of FSH scaffold. Despite growing interest, the pristine form of FSH has not been investigated for sustainable long-term three-dimensional (3D) cell culture. Here, FSH scaffolds were thoroughly characterized for their morphological, chemical, mechanical, and biological properties. 3D cell culture experiments were conducted using NIH-3T3 mouse fibroblast cells, and cell viability was assessed using live/dead and Alamar Blue assays. High cell viability was sustained for long term compared with 2D cell culture. Cell adhesion and 3D cellular morphology on FSH scaffold for 30 days were monitored by scanning electron microscopy analysis. Also, collagen type-I and F-actin expressions were analyzed by immunostaining after 30 days of culture, resulting in 5- and 4-fold increments of fluorescence intensity, respectively. Results indicate sustained cell viability in the long term and favorable cell-material interaction, demonstrating the potential of FSH as a scaffold. This study emphasizes the importance of the green extraction approach, improving the biocompatibility and functionality of FSH tissue engineering applications.

Advances in the preparation, applications, challenges, and future trends of polysaccharide-based gels as food-grade delivery systems for probiotics: A review

Probiotics are highly regarded for their multiple functions, such as regulating gut health, enhancing the immune system, and preventing chronic diseases. However, their stability in harsh environments and targeted release remain significant challenges. Therefore, exploring effective protection and delivery strategies to ensure targeted release of probiotics is critically important. Polysaccharides, known for their non-toxicity, excellent biocompatibility, and superior biodegradability, show broad prospects in probiotic delivery by forming physical barriers to protect the probiotics. Particularly, polysaccharide-based gels (PBGs), with their unique "spider-web" like structure, capture and ensure the targeted release of probiotics, significantly enhancing their efficacy. This review discusses common polysaccharides used in PBG preparation, their classification and synthesis in food applications, and the advantages of PBGs as probiotic delivery systems. Despite their potential, challenges such as inconsistent gel properties and the need for improved stability remain. Future research should focus on developing novel PBG materials with higher biodegradability and mechanical strength, optimizing the physicochemical properties and cross-linking methods, as well as designing multilayered structures for more precise release control. Additionally, exploring the co-delivery of probiotics with prebiotics, active ingredients, or multi-strain systems could further enhance the efficacy of probiotic delivery.

pH-Responsive Deacetylated Sphingan WL Gum-Based Microgels for the Oral Delivery of Ciprofloxacin Hydrochloride

Sphingan WL gum (WL) is an extracellular polysaccharide with a carboxyl group produced by Sphingomonas sp. WG. Recently, we have successfully obtained deacetylated WL (DWL) with good water solubility by alkaline treatment. In this study, a DWL-based microgel (named DWLM) with semi-interpenetrating network structure was constructed for the first time and used to deliver the oral drug ciprofloxacin hydrochloride (CIP). DLS results suggested that DWLM had a dual response to pH and temperature. The in vitro cumulative drug release curves showed that the amount of CIP released from the microgel was higher at pH 6.8 than that at pH 3.0. Biocompatibility assessments using HEK293T showed that cell viability was 75.9 ± 1.7% at the DWLM-CIP concentration of 4 mg/mL. While, the cell viability of CIP at the same concentration was only 54.9 ± 1.0%, indicating that DWLM-CIP has good biocompatibility. Antimicrobial performance tests revealed that DWLM-CIP at a concentration of 1 mg/mL could effectively inhibit the growth of Escherichia coli for up to 4 days. When the concentration of DWLM-CIP reached 4 mg/mL, the growth of Staphylococcus aureus was effectively suppressed for up to 3 days, demonstrating the long-lasting antimicrobial efficacy of DWLM-CIP. All of these results indicate that DWL-based microgels have great potential as oral drug delivery carriers.

Self-healing injectable hydrogels incorporating hyaluronic acid and phytic acid: Rheological insights and implications for regenerative medicine

Eying the increasing impact of hyaluronic acid (HA) and its multifaceted applications, this study employs a non-toxic, one-pot strategy to develop injectable, self-healing hydrogels for biomedical applications. Phytic acid (PA), a plant-derived organic acid with high biocompatibility and numerous hydroxyl groups, can act as a cross-linking agent to form hydrogen-bonded networks with the HA chains. The study examined the optimal mass ratio of HA to PA to achieve superior hydrogel performance. Fourier transform infrared spectroscopy, rheological studies, and thermal analysis confirmed the successful formation of the hydrogels, which exhibited injectability, rapid self-healing, malleability, and elasticity. The investigation of different compositions revealed a sensitive influence of PA on the self-assembly phenomena of HA during flow. SEM cross-section images of the freeze-dried gels revealed a porous surface in the form of an interconnected network of microchannels. In addition, the hydrogel exhibits good tissue adhesion properties and promotes cell proliferation in biocompatibility tests on human gingival fibroblasts. The significance of this study lies in the ability of the proposed materials to be injected, to conform to the complex 3D structure of host tissues as well as their ability to recover after damage, indicating significant potential as scaffolds for wound healing.

Synthesis, characterization and stability of crosslinked chitosan-maltodextrin pH-sensitive nanogels

Polysaccharide-based nanogels offer a wide range of chemical compositions and are of great interest due to their biodegradability, biocompatibility, non-toxicity, and their ability to display pH, temperature, or enzymatic response. In this work, we synthesized monodisperse and tunable pH-sensitive nanogels by crosslinking, through reductive amination, chitosan and partially oxidized maltodextrins, by keeping the concentration of chitosan close to its overlap concentration, i.e. in the dilute and semi-dilute regime. The chitosan/maltodextrin nanogels presented sizes ranging from 63 ± 9 to 279 ± 16 nm, showed quasi-spherical and cauliflower-like morphology, reached a ζ-potential of +36 ± 2 mV and maintained a colloidal stability for up to 7 weeks. It was found that the size and surface charge of nanogels depended both on the oxidation degree of maltodextrins and chitosan concentration, as well as on its degree of acetylation and protonation, the latter tuned by pH. The pH-responsiveness of the nanogels was evidenced by an increased size, owed to swelling, and ζ-potential when pH was lowered. Finally, maltodextrin-chitosan biocompatible nanogels were assessed by cell viability assay performed using the HEK293T cell line.

A review of the fungal polysaccharides as natural biopolymers: Current applications and future perspective

As a unique natural resource, fungi are a sustainable source of lipids, polysaccharides, vitamins, proteins, and other nutrients. As a result, they have beneficial medicinal and nutritional properties. Polysaccharides are among the most significant bioactive components found in fungi. Increasing research has revealed that fungal polysaccharides (FPS) contain a variety of bioactivities, including antitumor, antioxidant, immunomodulatory, anti-inflammatory, hepatoprotective, cardioprotective, and anti-aging properties. However, the exact knowledge about FPS and their applications related to their future possibilities must be thoroughly examined to enhance a better understanding of this sustainable biopolymer source. Therefore, FPS' biological applications and their role in the food and feed industry, agriculture, and cosmetics applications were all discussed in this work. In addition, this review highlighted the mode of action of FPS on human diseases by regulating gut microbiota and discussed the mechanism of FPS as antioxidants in the living cell. The structure-activity connections of FPS were also highlighted and explored. Moreover, future perspectives were listed to pave the way for future studies of FPS applications. Hence, this study can be a scientific foundation for future FPS research and industrial applications.

Polysaccharide-based biomaterials in a journey from 3D to 4D printing

3D printing is a state-of-the-art technology for the fabrication of biomaterials with myriad applications in translational medicine. After stimuli-responsive properties were introduced to 3D printing (known as 4D printing), intelligent biomaterials with shape configuration time-dependent character have been developed. Polysaccharides are biodegradable polymers sensitive to several physical, chemical, and biological stimuli, suited for 3D and 4D printing. On the other hand, engineering of mechanical strength and printability of polysaccharide-based scaffolds along with their aneural, avascular, and poor metabolic characteristics need to be optimized varying printing parameters. Multiple disciplines such as biomedicine, chemistry, materials, and computer sciences should be integrated to achieve multipurpose printable biomaterials. In this work, 3D and 4D printing technologies are briefly compared, summarizing the literature on biomaterials engineering though printing techniques, and highlighting different challenges associated with 3D/4D printing, as well as the role of polysaccharides in the technological shift from 3D to 4D printing for translational medicine.

Construction and Performance Evaluation of Nicandra physalodes (Linn.) Gaertn. Polysaccharide-Based Nanogel

The nanogels made from these polysaccharides and their derivatives are often used to construct drug delivery systems owing to their biocompatible, biodegradable, non-toxic, water-soluble, and bioactive characteristics. In this work, a novel pectin with unique gelling properties was extracted from the seed of Nicandra physalodes (NPGP). The structural research indicated that NPGP was a low methoxyl pectin with a high content of galacturonic acid. NPGP-based nanogels (NGs) were accomplished employing the water in oil (W/O) nano-emulsion method. The cysteamine containing reduction-responsive bond and integrin-targeting RGD peptide were also grafted onto NPGP. The anti-tumor drug doxorubicin hydrochloride (DOX) was loaded during the formation of NGs, and the performance of DOX delivery was studied. The NGs were characterized by UV-vis, DLS, TEM, FT-IR, and XPS. The results showed that the prepared NGs were nanosized (167.6 ± 53.86 nm), had excellent encapsulation efficiency (91.61 ± 0.85%), and possessed a fine drug loading capacity (8.40 ± 0.16%). The drug release experiment showed that DOX@NPGP-SS-RGD had good redox-responsive performance. Furthermore, the results of cell experiments revealed good biocompatibility of prepared NGs, along with selective absorption by HCT-116 cells through integrin receptor-mediated endocytosis to play an anti-tumor effect. These studies indicated the potential application of NPGP-based NGs as targeted drug delivery systems.

Targeting therapy effects of composite hyaluronic acid/chitosan nanosystems containing inclusion complexes

In order to solve the difficulties in the treatment of Staphylococcus aureus infections, a novel enrofloxacin-cyclodextrin (β-CD) inclusion complexes (IC) containing hyaluronic acid/chitosan (HA/CS) self-assemble composite nanosystems covered by poloxamer 188 was designed in our previous study. In this study, the sustained release peforemance, targeting delivery, and therapy effects of the enrofloxacin-composite nanosystems were evaluated in vivo. The enrofloxacin-composite nanosystems had uniform size and smooth surface with drug loading capacity (LC) of 9.92 ± 0.3%. Thermogravimetric analysis (TGA) showed that the material used for the preparation of the enrofloxacin-composite nanosystems did not affect the thermal stability of enrofloxacin. Compared with enrofloxacin injection and enrofloxacin polymeric nanoparticles, the enrofloxacin-composite nanosystems had excellent sustained-release performance in vivo. The enrofloxacin-composite nanosystems have specific targeting to the infection site of Staphylococcus aureus. The excellent sustained release and targeting delivery properties ensure that the anti-infective treatment effect of the enrofloxacin-composite nanosystems in vivo was higher than that of enrofloxacin injection and enrofloxacin polymeric nanoparticles. It can more effectively promote the wound healing. These results suggest that our previous designed enrofloxacin-composite nanosystems will be a promising formulation for effective targeting therapy of Staphylococcus aureus infections.

The use of natural gums to produce nano-based hydrogels and films for topical application

Natural gums are a source of biopolymeric materials with a wide range of applications for multiple purposes. These polysaccharides are extensively explored due to their low toxicity, gelling and thickening properties, and bioadhesive potential, which have sparked interest in researchers given their use in producing pharmaceutic dosage forms compared to synthetic agents. Hence, gums can be used as gelling and film-forming agents, which are suitable platforms for topical drug administration. Additionally, recent studies have demonstrated the possibility of obtaining nanocomposite materials formed by a polymeric matrix of gums associated with nanoscale carriers that have shown superior drug delivery performance and compatibility with multiple administration routes compared to starting components. In this sense, research on topical natural gum-based form preparation containing drug-loaded nanocarriers was detailed and discussed herein. A special focus was devoted to the advantages achieved regarding physicochemical and mechanical features, drug delivery capacity, permeability through topical barriers, and biocompatibility of the hydrogels and polymeric films.

Nanogel Development and its Application in Transdermal Drug Delivery System

Background:

Nanogels are hydrophilic polymer networks that range in size from 20 to 200 nanometers. Polymer is used to make nanogels, which can be obtained from natural or manu-factured sources. Nanogels can deliver peptides, antigens, carbohydrates, oligonucleotides, proteins, and genes, among other things. These nanogels also provide inorganic materials, such as silver na-noparticles and quantum dots. Both solid and liquid nanogels have the same properties. These nanogels penetrate the stratum corneum more effectively than conventional gels. Dermatology and cosmetology have both experimented with nanoscale technology.

Objective:

The medication can penetrate the stratum corneum through a variety of routes. One of the ways lipids can infiltrate the skin membrane is through the transcellular route. Cream, gel, oint-ment, lotion, thin-film, and foams are among the topical preparations used. Nanogels are catego-rised into two types: those that respond to stimuli and those that cross-link. For the manufacture of nanogels, numerous polymers of synthetic, natural, or semisynthetic origin are commonly em-ployed. Nanoprecipitation, emulsion polymerization, and dispersion polymerization are all ways to make these nanogels. These nanogels are rarely released by diffusion mechanism employing the Fick’s law.

Conclusions:

The nano gel is a new advanced technology that allows to improve drug molecule pen-etration in the stratum corneum. If poorly soluble and permeable medications are administered through this nanogel technology, their solubility and permeability will be improved.

Formation chitosan-based hydrogel film containing silicon for hops β-acids release as potential food packaging material

Hydrogel film composed of chitosan (CS) as raw material was prepared by free radical polymerization. Silicon was introduced into the hydrogel film in different ways (covalent/non-covalent) to improve the physical properties of the film, and β-acids were loaded to enhance the antibacterial activity of the film. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction (XRD) analysis were used to characterize the structure of films. The mechanical results indicated that when nano-silica (0.3%) was introduced into film (containing 0.2% β-acids) by non-covalently bond, the tensile strength increased to 8.59 MPa. Meanwhile silicon (0.3%) entered the film by covalent bonding, the tensile strength increased to 7.99 MPa. The films loaded with β-acids had well ability to blocks ultraviolet rays and exhibited inhibitory effect on E. coli and S. aureus. In the PBS (37 °C, pH = 7.4) simulant solution, the release mechanism of most films to release the β-acids followed non-Fick diffusion (n > 0.5). It could be concluded that the prepared hydrogel films loading with β-acids had broad application prospects in food packaging material with antibacterial property and controlled release.

Gastroretentive Technologies in Tandem with Controlled-Release Strategies: A Potent Answer to Oral Drug Bioavailability and Patient Compliance Implications

There have been many efforts to improve oral drug bioavailability and therapeutic efficacy and patient compliance. A variety of controlled-release oral delivery systems have been developed to meet these needs. Gastroretentive drug delivery technologies have the potential to achieve retention of the dosage form in the upper gastrointestinal tract (GIT) that can be sufficient to ensure complete solubilisation of the drugs in the stomach fluids, followed by subsequent absorption in the stomach or proximal small intestine. This can be beneficial for drugs that have an “absorption window” or are absorbed to a different extent in various segments of the GIT. Therefore, gastroretentive technologies in tandem with controlled-release strategies could enhance both the therapeutic efficacy of many drugs and improve patient compliance through a reduction in dosing frequency. The paper reviews different gastroretentive drug delivery technologies and controlled-release strategies that can be combined and summarises examples of formulations currently in clinical development and commercially available gastroretentive controlled-release products. The different parameters that need to be considered and monitored during formulation development for these pharmaceutical applications are highlighted.

Glycosaminoglycan-Based Cryogels as Scaffolds for Cell Cultivation and Tissue Regeneration

Cryogels are a class of macroporous, interconnective hydrogels polymerized at sub-zero temperatures forming mechanically robust, elastic networks. In this review, latest advances of cryogels containing mainly glycosaminoglycans (GAGs) or composites of GAGs and other natural or synthetic polymers are presented. Cryogels produced in this way correspond to the native extracellular matrix (ECM) in terms of both composition and molecular structure. Due to their specific structural feature and in addition to an excellent biocompatibility, GAG-based cryogels have several advantages over traditional GAG-hydrogels. This includes macroporous, interconnective pore structure, robust, elastic, and shape-memory-like mechanical behavior, as well as injectability for many GAG-based cryogels. After addressing the cryogelation process, the fabrication of GAG-based cryogels and known principles of GAG monomer crosslinking are discussed. Finally, an overview of specific GAG-based cryogels in biomedicine, mainly as polymeric scaffold material in tissue regeneration and tissue engineering-related controlled release of bioactive molecules and cells, is provided.

Microgels Based on Carboxymethylpullulan Grafted with Ferulic Acid Obtained by Enzymatic Crosslinking in Emulsion for Drug Delivery Systems

Carboxymethylpullulan (CMP) grafted with ferulic acid (FA) is crosslinked with laccase by the reverse water-in-oil emulsion technique (with sunflower oil) to obtain microgels with size from 40 to 200 µm. It is demonstrated that laccase activity and dispersion time have an impact on microgels' size. Fluorescence spectroscopy of different probes (e.g., pyrene, Nile red, and curcumin) shows the nonpolar characteristics of hydrophobic microdomains formed by the FA moieties and its dimers forming the crosslinking nodes. Encapsulation and release of curcumin or lidocaine used as drug models are studied in different buffers. Curcumin is well encapsulated but retained in microgels, while lidocaine is released at 65-70% in 2 h and 30 min in buffer simulating the gastrointestinal tract and at 75-85% in 1 h in acetate buffer pH 5.6 or phosphate-buffered saline (PBS) pH 6.9.

Biopolymers for Biological Control of Plant Pathogens: Advances in Microencapsulation of Beneficial Microorganisms

The use of biofertilizers, including biocontrol agents such as Pseudomonas and Bacillus in agriculture can increase soil characteristics and plant acquisition of nutrients and enhancement the efficiency of manure and mineral fertilizer. Despite the problems that liquid and solid formulations have in maintaining the viability of microbial agents, encapsulation can improve their application with extended shelf-life, and controlled release from formulations. Research into novel formulation methods especially encapsulation techniques has increased in recent years due to the mounting demand for microbial biological control. The application of polymeric materials in agriculture has developed recently as a replacement for traditional materials and considered an improvement in technological processes in the growing of crops. This study aims to overview of types of biopolymers and methods used for encapsulation of living biological control agents, especially microbial organisms.

Alginate enriched with phytic acid for hydrogels preparation

Alginate hydrogels are extremely versatile and flexible biomaterials, with an enormous potential for bio-applications use. Their similarity with extracellular matrix is a key factor in their performance for cell and tissue regeneration. In this study superabsorbent high porous hydrogels based on sodium alginate physical crosslinked with a natural crosslinker compound namely phytic acid were prepared and evaluated from the viewpoint of their specific properties. The resulting hydrogels obtained with different ratios between alginate and phytic acid were characterized by Fourier transform infrared spectroscopy technique, scanning electron microscopy, XRD measurements, swelling tests in physiological environment, and thermal analysis by using a simultaneous TG/FT-IR/MS system. There are put into evidence the differences in physico-chemical properties of the hydrogels in relation with their composition, which endows them tunable properties and versatility.

Gellan gum based gastroretentive tablets for bioavailability enhancement of cilnidipine in human volunteers

Cilnidipine, a fourth-generation both L-and N-type calcium channel blocker (CCB) is safe and effective in lowering blood-pressure without reflex tachycardia compared to other dihydropyridine CCBs. However, its low solubility coupled with extensive first-pass metabolism results in very low oral bioavailability. Thus the study aimed to improve oral bioavailability of Cilnidipine by increasing its gastrointestinal transit-time and mucoadhesion. Gastroretentive tablets were prepared by direct-compression technique using gellan gum as hydrogel forming polymer and sodium bicarbonate as gas-generating agent. Statistical optimization was carried out by design approach which showed that gellan gum has significant impact on floating lag time, mucoadhesive strength, % drug release at 1 h and time to release 90% of drug. Drug release study revealed that optimized tablets prolonged drug release for 12 h and followed anomalous-diffusion indicating drug release is by coupling of both diffusion and erosion mechanism. Intragastric behaviour of formulation in human volunteers revealed that radio-opaque tablets remain buoyant in stomach for more than 6 h with sufficient mucoadhesion. Comparative pharmacokinetic profiling in human subjects revealed that relative bioavailability of Cilnidipine GR tablets was enhanced compared to reference tablets. Thus concluded that gastroretentive tablets to be promising strategy for improved oral bioavailability of Cilnidipine for effective treatment of hypertension.

Micro- to Nanoscale Bio-Hybrid Hydrogels Engineered by Ionizing Radiation

Bio-hybrid hydrogels consist of a water-swollen hydrophilic polymer network encapsulating or conjugating single biomolecules, or larger and more complex biological constructs like whole cells. By modulating at least one dimension of the hydrogel system at the micro- or nanoscale, the activity of the biological component can be extremely upgraded with clear advantages for the development of therapeutic or diagnostic micro- and nano-devices. Gamma or e-beam irradiation of polymers allow a good control of the chemistry at the micro-/nanoscale with minimal recourse to toxic reactants and solvents. Another potential advantage is to obtain simultaneous sterilization when the absorbed doses are within the sterilization dose range. This short review will highlight opportunities and challenges of the radiation technologies to produce bio-hybrid nanogels as delivery devices of therapeutic biomolecules to the target cells, tissues, and organs, and to create hydrogel patterns at the nano-length and micro-length scales on surfaces.

Polymerization Reactions and Modifications of Polymers by Ionizing Radiation

Ionizing radiation has become the most effective way to modify natural and synthetic polymers through crosslinking, degradation, and graft polymerization. This review will include an in-depth analysis of radiation chemistry mechanisms and the kinetics of the radiation-induced C-centered free radical, anion, and cation polymerization, and grafting. It also presents sections on radiation modifications of synthetic and natural polymers. For decades, low linear energy transfer (LLET) ionizing radiation, such as gamma rays, X-rays, and up to 10 MeV electron beams, has been the primary tool to produce many products through polymerization reactions. Photons and electrons interaction with polymers display various mechanisms. While the interactions of gamma ray and X-ray photons are mainly through the photoelectric effect, Compton scattering, and pair-production, the interactions of the high-energy electrons take place through coulombic interactions. Despite the type of radiation used on materials, photons or high energy electrons, in both cases ions and electrons are produced. The interactions between electrons and monomers takes place within less than a nanosecond. Depending on the dose rate (dose is defined as the absorbed radiation energy per unit mass), the kinetic chain length of the propagation can be controlled, hence allowing for some control over the degree of polymerization. When polymers are submitted to high-energy radiation in the bulk, contrasting behaviors are observed with a dominant effect of cross-linking or chain scission, depending on the chemical nature and physical characteristics of the material. Polymers in solution are subject to indirect effects resulting from the radiolysis of the medium. Likewise, for radiation-induced polymerization, depending on the dose rate, the free radicals generated on polymer chains can undergo various reactions, such as inter/intramolecular combination or inter/intramolecular disproportionation, b-scission. These reactions lead to structural or functional polymer modifications. In the presence of oxygen, playing on irradiation dose-rates, one can favor crosslinking reactions or promotes degradations through oxidations. The competition between the crosslinking reactions of C-centered free radicals and their reactions with oxygen is described through fundamental mechanism formalisms. The fundamentals of polymerization reactions are herein presented to meet industrial needs for various polymer materials produced or degraded by irradiation. Notably, the medical and industrial applications of polymers are endless and thus it is vital to investigate the effects of sterilization dose and dose rate on various polymers and copolymers with different molecular structures and morphologies. The presence or absence of various functional groups, degree of crystallinity, irradiation temperature, etc. all greatly affect the radiation chemistry of the irradiated polymers. Over the past decade, grafting new chemical functionalities on solid polymers by radiation-induced polymerization (also called RIG for Radiation-Induced Grafting) has been widely exploited to develop innovative materials in coherence with actual societal expectations. These novel materials respond not only to health emergencies but also to carbon-free energy needs (e.g., hydrogen fuel cells, piezoelectricity, etc.) and environmental concerns with the development of numerous specific adsorbents of chemical hazards and pollutants. The modification of polymers through RIG is durable as it covalently bonds the functional monomers. As radiation penetration depths can be varied, this technique can be used to modify polymer surface or bulk. The many parameters influencing RIG that control the yield of the grafting process are discussed in this review. These include monomer reactivity, irradiation dose, solvent, presence of inhibitor of homopolymerization, grafting temperature, etc. Today, the general knowledge of RIG can be applied to any solid polymer and may predict, to some extent, the grafting location. A special focus is on how ionizing radiation sources (ion and electron beams, UVs) may be chosen or mixed to combine both solid polymer nanostructuration and RIG. LLET ionizing radiation has also been extensively used to synthesize hydrogel and nanogel for drug delivery systems and other advanced applications. In particular, nanogels can either be produced by radiation-induced polymerization and simultaneous crosslinking of hydrophilic monomers in "nanocompartments", i.e., within the aqueous phase of inverse micelles, or by intramolecular crosslinking of suitable water-soluble polymers. The radiolytically produced oxidizing species from water, •OH radicals, can easily abstract H-atoms from the backbone of the dissolved polymers (or can add to the unsaturated bonds) leading to the formation of C-centered radicals. These C-centered free radicals can undergo two main competitive reactions; intramolecular and intermolecular crosslinking. When produced by electron beam irradiation, higher temperatures, dose rates within the pulse, and pulse repetition rates favour intramolecular crosslinking over intermolecular crosslinking, thus enabling a better control of particle size and size distribution. For other water-soluble biopolymers such as polysaccharides, proteins, DNA and RNA, the abstraction of H atoms or the addition to the unsaturation by •OH can lead to the direct scission of the backbone, double, or single strand breaks of these polymers.

Amphiphilic Nanogels: Fuzzy Spheres with a Pseudo-Periodic Internal Structure

Amphiphilic polymer nanogels (NGs) are promising drug delivery vehicles that extend the application of conventional hydrophilic NGs to hydrophobic cargoes. By randomly introducing hydrophobic groups into a hydrophilic polymer network, loading and release profiles as well as surface characteristics of these colloids can be tuned. However, very little is known about the underlying internal structure of such complex colloidal architectures. Of special interest is the question how the amphiphilic network composition influences the internal morphology and the "fuzzy" surface structure. To shine light into the influence of varying network amphiphilicity on these structural features, we investigated a small library of water-swollen amphiphilic NGs using small-angle X-ray scattering (SAXS). It was found that overall hydrophilic NGs, consisting of pure poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA), display a disordered internal structure as indicated by the absence of a SAXS peak. In contrast, a SAXS peak is present for amphiphilic NGs with various amounts of incorporated hydrophobic groups such as cholesteryl (CHOLA) or dodecyl (DODA). The internal composition of the NGs is considered structurally homologous to microgels. Application of the Teubner-Strey model reveals that hydrophilic PHPMA NGs have a disordered internal structure (positive amphiphilicity factor) while CHOLA and DODA samples have an ordered internal structure (negative amphiphilicity factor). From the SAXS data it can be derived that the internal structure of the amphiphilic NGs consists of regularly alternating hydrophilic and hydrophobic domains with repeat distances of 3.45-5.83 nm.

New Trends in Bio-Based Aerogels

(1) Background: The fascinating properties of currently synthesized aerogels associated with the flexible approach of sol-gel chemistry play an important role in the emergence of special biomedical applications. Although it is increasingly known and mentioned, the potential of aerogels in the medical field is not sufficiently explored. Interest in aerogels has increased greatly in recent decades due to their special properties, such as high surface area, excellent thermal and acoustic properties, low density and thermal conductivity, high porosity, flame resistance and humidity, and low refractive index and dielectric constant. On the other hand, high manufacturing costs and poor mechanical strength limit the growth of the market. (2) Results: In this paper, we analyze more than 180 articles from recent literature studies focused on the dynamics of aerogels research to summarize the technologies used in manufacturing and the properties of materials based on natural polymers from renewable sources. Biomedical applications of these bio-based materials are also introduced. (3) Conclusions: Due to their complementary functionalities (bioactivity, biocompatibility, biodegradability, and unique chemistry), bio-based materials provide a vast capability for utilization in the field of interdisciplinary and multidisciplinary scientific research.