Micropatterned Smart Culture Surfaces via Multi-Step Physical Coating of Functional Block Copolymers for Harvesting Cell Sheets with Controlled Sizes and Shapes

Visible-light-triggered recovery of biologically intact cells using smart fluoropolymer-nanocoated materials

Smart biointerfaces have attracted significant interest for regulating interactions with cells and biomacromolecules. Although stimuli-responsive changes in hydrophobicity are promising for this purpose, the effects of hydrophobic enhancement on cell adhesion behavior remain poorly understood. This study investigated a unique cell recovery system involving a visible (Vis)-light-induced change in the hydrophobicity of a smart surface from moderate to strong. To construct smart surfaces, photoresponsive spirobenzopyran-pendant fluoroalkyl polymers were spin-coated on glass coverslips. The surface properties were characterized after irradiation with ultraviolet (UV; 352 nm) or Vis (530 nm) light. Upon alternating exposure to UV and Vis light, the water wettabilities of the 1.0 w/v% polymer-coated surfaces changed (contact angles of 78° and 88°, respectively) owing to photoisomerization between the polar merocyanine and nonpolar spiropyran forms of the installed spirobenzopyrans, consistent with the observed optical properties. Atomic force microscopy showed that the polymer-coated surfaces were nanoscale flat forms without any phase-separated structures, regardless of photoswitching. After UV irradiation, bovine carotid artery endothelial cells adhered and proliferated on the moderately hydrophobic merocyanine-containing fluoropolymer surfaces. However, subsequent Vis irradiation induced spontaneous cell detachment, possibly because of the increase in surface hydrophobicity. Moreover, Vis irradiation of confluent cultured cells produced biologically intact cell sheets that retained a cell-adhesive fibronectin matrix and cell-cell junctions. This noncytotoxic Vis-triggered cell recovery system can contribute to the development of tissue engineering and cell transplantation therapies.

Reliable Harvest of Injectable Human Mesenchymal Stem Cell Sheets by Modulating Cell-Substrate Adhesion Strength

Cell sheet engineering has emerged as a promising scaffold-free strategy in cell-based therapeutics, preserving essential cell-cell and cell-extracellular matrix (ECM) interactions. To enable minimally invasive delivery, a key challenge relies on making the cell sheets compatible with injection-based administration without subjecting sensitive cells to physical or thermal stresses. This study addresses a reliable method for controlling cell sheet dimensions by combining differential cell adhesion-guided micropatterning along with an isothermal detachment method. The surface composition of a copolymer, poly(ethylene glycol dimethacrylate-co-hydroxyethyl methacrylate) is delicately controlled via initiated chemical vapor deposition to ensure intact cell adhesion and rapid cell detachment under isothermal condition. The optimized surface further allows hydrophobic microcontact printing for creating micron-sized sheets. Human mesenchymal stem cell sheets harvested with this method show preserved ECM without compromising cell viability after both detachment and injection. Moreover, the injected cell sheets substantially enhance the angiogenic potential of human umbilical vein endothelial cells, demonstrating the sustained therapeutic activity of the cell sheet after injection. It is believed that this approach has great potential to broaden the scope of cell sheet engineering, serving as a robust platform for regenerative medicine.

Stable preparation of in vivo transplantable periodontal ligament-derived mesenchymal stem cell sheets in thermoresponsive culture dishes with tunable cell detachability

Tissue engineering plays a pivotal role in the advancement of regenerative medicine. Thermoresponsive culture dishes, coated with specialized polymers that control cell adhesion through temperature fluctuations, enable the processing of cells into sheets for medical applications while maintaining their intact state. Cell sheets prepared using these culture dishes have been incorporated into several commercial pharmaceutical products. However, controlling the detachability of cell sheets using conventional thermoresponsive culture dishes remains a challenge, and often leads to unexpected detachment during cultivation. In this study, we developed a thermoresponsive culture dish with tunable cell detachability using a thermoresponsive block copolymer, poly(butyl methacrylate)-b-poly(N-isopropylacrylamide) (PBMA-PIPAAm), which is a specialized polymer that allows precise control of the amount of surface-immobilized polymer and polymer layer thickness. Culturing periodontal ligament-derived mesenchymal stem cells on these dishes demonstrated fully tunable detachability without compromising cell properties compared to conventional thermoresponsive dishes (UpCell®). Thermoresponsive PBMA-PIPAAm-coated culture dishes enable the complete on-demand detachment of transplantable cell sheets, thereby avoiding unexpected detachment that may increase production costs and reduce technical hurdles in the manufacturing process. The PBMA-PIPAAm coating method has the potential to contribute to biomedical and clinical applications of mesenchymal stem cell sheets.

Temperature-modulated interactions between thermoresponsive strong cationic copolymer-brush-grafted silica beads and biomolecules

Thermoresponsive polymer brushes have attracted considerable research attention owing to their unique properties. Herein, we developed silica beads grafted with poly(N-isopropylacrylamide (NIPAAm)-co-3-acrylamidopropyl trimethylammonium chloride (APTAC)-co-tert-butyl acrylamide (tBAAm) and P(NIPAAm-co-APTAC-co-n-butyl methacrylate(nBMA)) brushes. The carbon, hydrogen, and nitrogen elemental analysis of the copolymer-grated silica beads revealed the presence of a large amount of the grafted copolymer on the silica beads. The electrostatic and hydrophobic interactions between biomolecules and prepared copolymer brushes were analyzed by observing their elution behaviors via high-performance liquid chromatography using the copolymer-brush-modified beads as the stationary phase. Adenosine nucleotides were retained in the bead-packed columns, which was attributed to the electrostatic interaction between the copolymers and adenosine nucleotides. Insulin was adsorbed on the copolymer brushes at high temperatures, which was attributed to its electrostatic and hydrophobic interactions with the copolymer. Similar adsorption behavior was observed in case of albumin. Further, at a low concentration of the phosphate buffer solution, albumin was adsorbed onto the copolymer brushes even at relatively low temperatures owing to its enhanced electrostatic interaction with the copolymer. These results indicated that the developed thermoresponsive strong cationic copolymer brushes can interact with peptides and proteins through a combination of electrostatic and temperature-modulated hydrophobic interactions. Thus, the developed copolymer brushes exhibits substantial potential for application in chromatographic matrices for the analysis and purification of peptides and proteins.

Harvesting methods of umbilical cord-derived mesenchymal stem cells from culture modulate cell properties and functions

Introduction

Human umbilical cord-derived mesenchymal stem cells (UC-MSCs) are promising candidates for stem cell therapy. Various methods such as enzymatic treatment, cell scraping, and temperature reduction using temperature-responsive cell culture dishes have been employed to culture and harvest UC-MSCs. However, the effects of different harvesting methods on cell properties and functions in vitro remain unclear. In this study, we investigated the properties and functions of UC-MSC using various cell-harvesting methods.

Methods

UC-MSC suspensions were prepared using treatments with various enzymes, cell scraping, and temperature reduction in temperature-responsive cell culture dishes. UC-MSC sheets were prepared in a temperature-responsive cell culture dish. The properties and functions of the UC-MSC suspensions and sheets were assessed according to Annexin V staining, lactate dehydrogenase (LDH) assay, re-adhesion behavior, and cytokine secretion analysis via enzyme-linked immunosorbent assay.

Results

Annexin V staining revealed that accutase induced elevated UC-MSC apoptosis. Physical scraping using a cell scraper induced a relatively high LDH release due to damaged cell membranes. Dispase exhibited relatively low adhesion from initial incubation until 3 h. UC-MSC sheets exhibited rapid re-adhesion at 15 min and cell migration at 6 h. UC-MSC sheets expressed higher levels of cytokines such as HGF, TGF-β1, IL-10, and IL-6 than did UC-MSCs in suspension.

Conclusions

The choice of enzyme and physical scraping methods for harvesting UC-MSCs significantly influenced their activity and function. Thus, selecting appropriate cell-harvesting methods is important for successful stem cell therapy.

Bioanalytical technologies using temperature-responsive polymers

In recent decades, various bioanalytical technologies have been investigated for appropriate medical treatment and effective therapy. Temperature-responsive chromatography is a promising bioanalytical technology owing to its functional properties. Temperature-responsive chromatography uses a poly(N-isopropylacrylamide)(PNIPAAm) modified stationary phase as the column packing material. The hydrophobic interactions between PNIPAAm and the analyte could be modulated by changing the column temperature because of the temperature-responsive hydrophobicity of PNIPAAm. Thus, the chromatography system does not require organic solvents in the mobile phase, making it suitable for therapeutic drug monitoring in medical settings such as hospitals. This review summarizes recent developments in temperature-responsive chromatography systems for therapeutic drug monitoring applications. In addition, separation methods for antibody drugs using PNIPAAm are also summarized because these methods apply to the therapeutic drug monitoring of biopharmaceutics. The temperature-responsive chromatography systems can also be utilized for clinical diagnosis, as they can assess multiple medicines simultaneously. This highlights the significant potential of temperature-responsive chromatography in medicine and healthcare.

bFGF-releasing biodegradable nanoparticles for effectively engrafting transplanted hepatocyte sheet

Hepatic tissue engineering has been applied for the treatment of intractable liver diseases, and hepatocyte sheets are promising for this purpose. However, hepatocyte sheets have poor survival after transplantation because of their high metabolic activity. In this study, we aimed to develop basic fibroblast growth factor (bFGF)-releasing nanoparticles to prolong the survival of hepatocyte sheets after transplantation. The nanoparticles were prepared by electrospraying a bFGF-dispersed poly(D,l-lactide-co-glycolide) emulsion. bFGF-loaded PLGA nanoparticles can be developed by optimizing the applied electrospray voltage and the oil:water ratio of the emulsion. The prepared nanoparticles exhibited prompt release at the initial duration and continuous gradual release at the subsequent duration. Hepatocyte sheet engraftment was evaluated by transplanting hepatocyte sheets containing the prepared nanoparticles into rats. The hepatocyte sheets with the prepared nanoparticles exhibited longer survival than those without the bFGF nanoparticles or solution owing to the local and continuous release of bFGF from the nanoparticles and the subsequent enhanced angiogenesis at the transplantation site. These results indicated that the prepared bFGF-releasing nanoparticles can enhance the efficiency of hepatocyte sheet transplantation. The developed bFGF-releasing nanoparticles would be useful for the transplantation of cellular tissue with post-transplantation survival challenges.

Advances in the design, generation, and application of tissue-engineered myocardial equivalents

Due to the limited regenerative ability of cardiomyocytes, the disabling irreversible condition of myocardial failure can only be treated with conservative and temporary therapeutic approaches, not able to repair the damage directly, or with organ transplantation. Among the regenerative strategies, intramyocardial cell injection or intravascular cell infusion should attenuate damage to the myocardium and reduce the risk of heart failure. However, these cell delivery-based therapies suffer from significant drawbacks and have a low success rate. Indeed, cardiac tissue engineering efforts are directed to repair, replace, and regenerate native myocardial tissue function. In a regenerative strategy, biomaterials and biomimetic stimuli play a key role in promoting cell adhesion, proliferation, differentiation, and neo-tissue formation. Thus, appropriate biochemical and biophysical cues should be combined with scaffolds emulating extracellular matrix in order to support cell growth and prompt favorable cardiac microenvironment and tissue regeneration. In this review, we provide an overview of recent developments that occurred in the biomimetic design and fabrication of cardiac scaffolds and patches. Furthermore, we sift in vitro and in situ strategies in several preclinical and clinical applications. Finally, we evaluate the possible use of bioengineered cardiac tissue equivalents as in vitro models for disease studies and drug tests.

Emerging biomaterials and technologies to control stem cell fate and patterning in engineered 3D tissues and organoids

The ability to create complex three-dimensional cellular models that can effectively replicate the structure and function of human organs and tissues in vitro has the potential to revolutionize medicine. Such models could facilitate the interrogation of developmental and disease processes underpinning fundamental discovery science, vastly accelerate drug development and screening, or even be used to create tissues for implantation into the body. Realization of this potential, however, requires the recreation of complex biochemical, biophysical, and cellular patterns of 3D tissues and remains a key challenge in the field. Recent advances are being driven by improved knowledge of tissue morphogenesis and architecture and technological developments in bioengineering and materials science that can create the multidimensional and dynamic systems required to produce complex tissue microenvironments. In this article, we discuss challenges for in vitro models of tissues and organs and summarize the current state-of-the art in biomaterials and bioengineered systems that aim to address these challenges. This includes both top-down technologies, such as 3D photopatterning, magnetism, acoustic forces, and cell origami, as well as bottom-up patterning using 3D bioprinting, microfluidics, cell sheet technology, or composite scaffolds. We illustrate the varying ways that these can be applied to suit the needs of different tissues and applications by focussing on specific examples of patterning the bone-tendon interface, kidney organoids, and brain cancer models. Finally, we discuss the challenges and future prospects in applying materials science and bioengineering to develop high-quality 3D tissue structures for in vitro studies.

Perfusable vascular tree like construction in 3D cell-dense tissues using artificial vascular bed

Perfusable vascular structures in cell-dense tissues are essential for fabricating functional three-dimensional (3D) tissues in vitro. However, it is challenging to introduce functional vascular networks observable as vascular tree, finely spaced at intervals of tens of micrometers as in living tissues, into a 3D cell-dense tissue. Herein, we propose a method for introducing numerous vascular networks that can be perfused with blood into 3D tissues constructed by cell sheet engineering. We devise an artificial vascular bed using a hydrogel that is barely deformed by cells, enabling perfusion of the culture medium directly beneath the cell sheets. Triple-layered cell sheets with an endothelial cell network prepared by fibroblast co-culture are transplanted onto the vascular bed and subjected to perfusion culture. We demonstrate that numerous vascular networks are formed with luminal structures in the cell sheets and can be perfused with India ink or blood after a five-day perfusion culture. Histological analysis also demonstrates that perfusable vascular structures are constructed at least 100 μm intervals uniformly and densely within the tissues. The results suggest that our perfusion culture method enhances vascularization within the 3D cell-dense tissues and enables the introduction of functional vasculature macroscopically observable as vascular tree in vitro. In conclusion, this technology can be used to fabricate functional tissues and organs for regenerative therapies and in vitro experimental models.

Thermoresponsive interfaces obtained using poly(N-isopropylacrylamide)-based copolymer for bioseparation and tissue engineering applications

Poly(N-isopropylacrylamide) (PNIPAAm) is the most well-known and widely used stimuli-responsive polymer in the biomedical field owing to its ability to undergo temperature-dependent hydration and dehydration with temperature variations, causing hydrophilic and hydrophobic alterations. This temperature-dependent property of PNIPAAm provides functionality to interfaces containing PNIPAAm. Notably, the hydrophilic and hydrophobic alterations caused by the change in the temperature-responsive property of PNIPAAm-modified interfaces induce temperature-modulated interactions with biomolecules, proteins, and cells. This intrinsic property of PNIPAAm can be effectively used in various biomedical applications, particularly in bioseparation and tissue engineering applications, owing to the functionality of PNIPAAm-modified interfaces based on the temperature modulation of the interaction between PNIPAAm-modified interfaces and biomolecules and cells. This review focuses on PNIPAAm-modified interfaces in terms of preparation method, properties, and their applications. Advances in PNIPAAm-modified interfaces for existing and developing applications are also summarized.