Converging 3D Printing and Electrospinning: Effect of Poly(l-lactide)/Gelatin Based Short Nanofibers Aerogels on Tracheal Regeneration

Bioengineered tracheal graft with enhanced vascularization and mechanical stability for functional airway reconstruction

Tracheal reconstruction remains a formidable clinical challenge due to the complex structural, biomechanical, and physiological requirements of the airway. Traditional approaches, including autologous grafts, allografts, and synthetic prostheses, suffer from limitations such as donor site morbidity, immune rejection, and mechanical instability. Tissue-engineered tracheal grafts have emerged as a promising alternative, integrating advanced biomaterials, cellular therapies, and biofabrication techniques to create functional airway replacements. Synthetic polymers, such as polycaprolactone and polylactic acid, provide mechanical stability and tunable degradation properties, while extracellular matrix - derived biomaterials enhance biocompatibility and support cellular integration. Recent advances in stem cell biology, particularly the application of mesenchymal stem cells, induced pluripotent stem cells, and adipose-derived stem cells, have facilitated cartilage regeneration, epithelialization, and immune modulation within engineered constructs. However, achieving adequate vascularization remains a major bottleneck, necessitating the development of pre-vascularized scaffolds, growth factor delivery systems, and in vivo bioreactor strategies. Emerging technologies, including 3D bioprinting, electrospinning, and AI-driven scaffold design, are transforming the landscape of tracheal tissue engineering by enabling precise control over scaffold architecture, cellular distribution, and functional integration. Despite these advances, challenges such as mechanical failure, chronic inflammation, and regulatory hurdles must be addressed to ensure clinical translation. This review critically examines the latest advancements, persisting challenges, and future perspectives in artificial trachea engineering, providing a comprehensive roadmap for its development and clinical implementation.

Vascular endothelial growth factor (VEGF) and endogenous calcium-capturing gelatin methacrylate hydrogels promote bone tissue regeneration

The regeneration of irregular-shaped bone defects remains a perpetuating challenge. Scaffolds with osteogenesis and angiogenesis dual capabilities hold considerable promise for bone tissue repair. The objective of this study was to delineate the synergistic effect of calcium ions (Ca2+)-recruiting peptide (FVDVT, abbreviated as CP) and vascular endothelial growth factor (VEGF)-binding prominin-1-derived peptide (DRVQRQTTTVVA, abbreviated as BP) in gelatin methacrylate (GM)-based hydrogels (GM@BCP). BP-loaded hydrogels can recruit VEGF in situ to promote angiogenesis, as well as promote cell viability and growth as revealed by the whole transcriptome RNA sequencing of human umbilical vein endothelial cells (HUVECs). PLA/G@CP short fibers can induce bone matrix mineralization and regulate mechanical behavior of hydrogels. The GM@BCP hydrogels were found to be cytocompatible, non-toxic, and bioresorbable, as well as fill an irregular-shaped bone defect in vivo. Moreover, evaluation in a rat calverial defect model manifested significant promise of GM@BCP hydrogels to promote bone tissue repair by simultaneously inducing osteogenesis and angiogenesis 8 weeks post-operatively. Taken together, our approach of simultaneously harnessing in situ calcium ion (Ca2+) binding and VEGF recruitment may have broad implications for fracture repair and potentially other related disciplines.

Advancements in lung regeneration: from bench to bedside

Lung disorders rank among the leading causes of mortality worldwide, presenting a critical challenge in healthcare. The underlying limited regenerative capacity of the lung makes this an unmet clinical need, often necessitating lung transplantation for patients with severe lung disease. However, the lack of viable donor organs underscores the urgent need for alternative therapeutic strategies. Addressing this challenge requires a comprehensive understanding of the structure of lung tissue and the complexities inherent in its regeneration. In this review, we explore recent breakthroughs in lung regenerative medicine, highlighting innovative approaches aimed at tackling lung and tracheal diseases. From stem cell and cell-based therapies to the utilization of biological and synthetic materials, as well as the strategic deployment of growth factors, a diverse array of strategies is being explored to rejuvenate lung function. By critical analysis of in vitro, preclinical, and clinical studies, this review aims to provide a comprehensive overview of the emerging technology of lung regeneration research, shedding light on promising avenues for future therapeutic interventions.

Recent advances of bioaerogels in medicine: Preparation, property and application

Bioaerogels represent a type of three-dimensional porous materials fabricated from natural biopolymers, and show a significant potential for medical application due to their characteristics of extremely low density, high specific surface area, excellent biocompatibility and biodegradability. The preparation method and parameters of bioaerogels are focused on, and their influence on the structure and properties of bioaerogels are discussed in detail. Then, to match the properties of bioaerogels with the medical applications, this work emphasizes the main properties (including biocompatibility, degradability, and mechanical properties), structural parameters (such as suitable porosity, pore size and high specific surface area), and further summarizes the influence of single-component and composite bioaerogels on their properties. Moreover, according to the different applications (wound healing, drug delivery, and tissue engineering and other fields), the function method, mechanism and practical effect of bioaerogels are comprehensively analyzed. Finally, the challenges, future research directions, and solutions for the practical application of bioaerogels in medicine are discussed.

Cartilage Tissue Engineering in Multilayer Tissue Regeneration

The functional and structural integrity of the tissue/organ can be compromised in multilayer reconstructive applications involving cartilage tissue. Therefore, multilayer structures are needed for cartilage applications. In this review, we have examined multilayer scaffolds for use in the treatment of damage to organs such as the trachea, joint, nose, and ear, including the multilayer cartilage structure, but we have generally seen that they have potential applications in trachea and joint regeneration. In conclusion, when the existing studies are examined, the results are promising for the trachea and joint connections, but are still limited for the nasal and ear. It may have promising implications in the future in terms of reducing the invasiveness of existing grafting techniques used in the reconstruction of tissues with multilayered layers.

Innovative approaches in lung tissue engineering: the role of exosome-loaded bioscaffolds in regenerative medicine

Lung diseases account for over four million premature deaths every year, and experts predict that this number will increase in the future. The top cause of death globally is diseases which include conditions like lung cancer asthma and COPD. Treating severe acute lung injury is a complex task because lungs struggle to heal themselves in the presence of swelling inflammation and scarring caused by damage, to the lung tissues. Though achieving lung regeneration, in controlled environments is still an ambition; ongoing studies are concentrating on notable progress, in the field of lung tissue engineering and methods for repairing lung damage. This review delves into methods, for regenerating lungs with a focus on exosome carry bioscaffolds and mesenchymal stem cells among others. It talks about how these new techniques can help repair lung tissue and improve lung function in cases of damage. Also noted is the significance of ex vivo lung perfusion (EVLP), for rejuvenating donor lungs and the healing properties of exosomes in supporting lung regeneration.

Coaxial nanofibrous aerogel featuring porous network-structured channels for ovarian cancer treatment by sustained release of chitosan oligosaccharide

Ovarian cancer, the deadliest gynecological malignancy, primarily treated with chemotherapy. However, systemic chemotherapy often leads to severe toxic side effects and chemoresistance. Drug-loaded aerogels have emerged as a promising method for drug delivery, as they can improve drug solubility and bioavailability, control drug release, and reduce drug distribution in non-targeted tissues, thereby minimizing side effects. In this research, chitosan oligosaccharide (COS)-loaded nanofibers composite chitosan (CS) aerogels (COS-NFs/CS) with a porous network structure were created using nanofiber recombination and freeze-drying techniques. The core layer of the aerogel has a COS loading rate of 60 %, enabling the COS-NFs/CS aerogel to significantly inhibit the migration and proliferation of ovarian cancer cells (resulting in a decrease in the survival rate of ovarian cancer cells to 33.70 % after 48 h). The coaxial fiber's unique shell-core structure and the aerogel's porous network structure enable the COS-NFs/CS aerogels to release COS steadily and slowly over 30 days, effectively reducing the initial burst release of COS. Additionally, the COS-NFs/CS aerogels exhibit good biocompatibility, degradability (only retaining 18.52 % of their weight after 6 weeks of implantation), and promote angiogenesis, thus promoting wound healing post-oophorectomy. In conclusion, COS-NFs/CS aerogels show great potential for application in the treatment of ovarian cancer.

Composite Aerogel Scaffolds Containing Flexible Silica Nanofiber and Tricalcium Phosphate Enable Skin Regeneration

Poor hemostatic ability and less vascularization at the injury site could hinder wound healing as well as adversely affect the quality of life (QOL). An ideal wound dressing should exhibit certain characteristics: (a) good hemostatic ability, (b) rapid wound healing, and (c) skin appendage formation. This necessitates the advent of innovative dressings to facilitate skin regeneration. Therapeutic ions, such as silicon ions (Si4+) and calcium ions (Ca2+), have been shown to assist in wound repair. The Si4+ released from silica (SiO2) can upregulate the expression of proteins, including the vascular endothelial growth factor (VEGF) and alpha smooth muscle actin (α-SMA), which is conducive to vascularization; Ca2+ released from tricalcium phosphate (TCP) can promote the coagulation alongside upregulating the expression of cell migration and cell differentiation related proteins, thereby facilitating the wound repair. The overarching objective of this study was to exploit short SiO2 nanofibers along with the TCP to prepare TCPx@SSF aerogels and assess their wound healing ability. Short SiO2 nanofibers were prepared by electrospinning and blended with varying proportions of TCP to afford TCPx@SSF aerogel scaffolds. The TCPx@SSF aerogels exhibited good cytocompatibility in a subcutaneous implantation model and manifested a rapid hemostatic effect (hemostatic time 75 s) in a liver trauma model in the rabbit. These aerogel scaffolds also promoted skin regeneration and exhibited rapid wound closure, epithelial tissue regeneration, and collagen deposition. Taken together, TCPx@SSF aerogels may be valuable for wound healing.

New dimensions of electrospun nanofiber material designs for biotechnological uses

Electrospinning technology has garnered wide attention over the past few decades in various biomedical applications including drug delivery, cell therapy, and tissue engineering. This technology can create nanofibers with tunable fiber diameters and functionalities. However, the 2D membrane nature of the nanofibers, as well as the rigidity and low porosity of electrospun fibers, lower their efficacy in tissue repair and regeneration. Recently, new avenues have been explored to resolve the challenges associated with 2D electrospun nanofiber membranes. This review discusses recent trends in creating different electrospun nanofiber microstructures from 2D nanofiber membranes by using various post-processing methods, as well as their biotechnological applications.

Degradable biomedical elastomers: paving the future of tissue repair and regenerative medicine

Degradable biomedical elastomers (DBE), characterized by controlled biodegradability, excellent biocompatibility, tailored elasticity, and favorable network design and processability, have become indispensable in tissue repair. This review critically examines the recent advances of biodegradable elastomers for tissue repair, focusing mainly on degradation mechanisms and evaluation, synthesis and crosslinking methods, microstructure design, processing techniques, and tissue repair applications. The review explores the material composition and cross-linking methods of elastomers used in tissue repair, addressing chemistry-related challenges and structural design considerations. In addition, this review focuses on the processing methods of two- and three-dimensional structures of elastomers, and systematically discusses the contribution of processing methods such as solvent casting, electrostatic spinning, and three-/four-dimensional printing of DBE. Furthermore, we describe recent advances in tissue repair using DBE, and include advances achieved in regenerating different tissues, including nerves, tendons, muscle, cardiac, and bone, highlighting their efficacy and versatility. The review concludes by discussing the current challenges in material selection, biodegradation, bioactivation, and manufacturing in tissue repair, and suggests future research directions. This concise yet comprehensive analysis aims to provide valuable insights and technical guidance for advances in DBE for tissue engineering.

Methacrylated gelatin and platelet-rich plasma based hydrogels promote regeneration of critical-sized bone defects

Physiological repair of large-sized bone defects requires instructive scaffolds with appropriate mechanical properties, biocompatibility, biodegradability, vasculogenic ability and osteo-inductivity. The objective of this study was to fabricate in situ injectable hydrogels using platelet-rich plasma (PRP)-loaded gelatin methacrylate (GM) and employ them for the regeneration of large-sized bone defects. We performed various biological assays as well as assessed the mechanical properties of GM@PRP hydrogels alongside evaluating the release kinetics of growth factors (GFs) from hydrogels. The GM@PRP hydrogels manifested sufficient mechanical properties to support the filling of the tissue defects. For biofunction assay, the GM@PRP hydrogels significantly improved cell migration and angiogenesis. Especially, transcriptome RNA sequencing of human umbilical vein endothelial cells and bone marrow-derived stem cells were performed to delineate vascularization and biomineralization abilities of GM@PRP hydrogels. The GM@PRP hydrogels were subcutaneously implanted in rats for up to 4 weeks for preliminary biocompatibility followed by their transplantation into a tibial defect model for up to 8 weeks in rats. Tibial defects treated with GM@PRP hydrogels manifested significant bone regeneration as well as angiogenesis, biomineralization, and collagen deposition. Based on the biocompatibility and biological function of GM@PRP hydrogels, a new strategy is provided for the regenerative repair of large-size bone defects.

Advanced Nanomaterials in Medical 3D Printing

3D printing is now recognized as a significant tool for medical research and clinical practice, leading to the emergence of medical 3D printing technology. It is essential to improve the properties of 3D-printed products to meet the demand for medical use. The core of generating qualified 3D printing products is to develop advanced materials and processes. Taking advantage of nanomaterials with tunable and distinct physical, chemical, and biological properties, integrating nanotechnology into 3D printing creates new opportunities for advancing medical 3D printing field. Recently, some attempts are made to improve medical 3D printing through nanotechnology, providing new insights into developing advanced medical 3D printing technology. With high-resolution 3D printing technology, nano-structures can be directly fabricated for medical applications. Incorporating nanomaterials into the 3D printing material system can improve the properties of the 3D-printed medical products. At the same time, nanomaterials can be used to expand novel medical 3D printing technologies. This review introduced the strategies and progresses of improving medical 3D printing through nanotechnology and discussed challenges in clinical translation.

Engineering biomimetic scaffolds by combining silk protein nanofibrils and hyaluronic acid

Nanofibrous scaffolds mimicking important features of the native extracellular matrix (ECM) provide a promising strategy for tissue regeneration. However, 3D scaffolds mimicking natural protein nanofibers and bioactive glycosaminoglycans remain poorly developed. In this study, a biomimetic nanofibrous scaffold composed of natural silk protein nanofibers and glycosaminoglycan hyaluronic acid (HA) was developed. HA functionalization significantly improved the hydrophilicity and bioactivity of silk nanofibers (SNFs). SNFs can be assembled into nanofibrous aerogel scaffolds with low density and desirable shapes on a large scale. More importantly, with the assistance of HA, the silk nanofibrous aerogel scaffolds with ultra-high porosity, natural bioactivity, and structural stability in aqueous environment can be fabricated. In the protease/hyaluronidase solution, the SNF scaffolds with 10.0 % HA can maintain their monolithic shape for >3 weeks. The silk nanofibrous scaffolds not only imitate the composition of ECM but also mimic the hierarchical structure of ECM, providing a favorable microenvironment for cell adhesion and proliferation. These results indicate that this structurally and functionally biomimetic system is a promising tissue engineering scaffold.

Elastic 3D-Printed Nanofibers Composite Scaffold for Bone Tissue Engineering

Loading nanoparticles into hydrogels has been a conventional approach to augment the printability of ink and the physicochemical characteristics of scaffolds in three-dimensional (3D) printing. However, the efficacy of this enhancement has often proven to be limited. We amalgamate electrospun nanofibers with 3D printing techniques to fabricate a composite scaffold reminiscent of a "reinforced concrete" structure, aimed at addressing bone defects. These supple silica nanofibers are synthesized through a dual-step process involving high-speed homogenization and low-temperature ball milling technology. The nanofibers are homogeneously blended with sodium alginate to create the printing ink. The resultant ink was extruded seamlessly, displaying commendable molding properties, thereby yielding scaffolds with favorable macroscopic morphology. In contrast to nanoparticle-reinforced scaffolds, composite scaffolds containing nanofibers exhibit superior mechanical attributes and bioactivity. These nanofiber composite scaffolds demonstrate enhanced osteoinductive properties in both in vitro and in vivo evaluations. To conclude, this research introduces a novel 3D printing approach where the fabricated nanofiber-infused 3D-printed scaffolds hold the potential to revolutionize the realm of 3D printing in the domain of bone tissue engineering.

Integration of 3D Printing-Coelectrospinning: Concept Shifting in Biomedical Applications

Porous structures with sizes between the submicrometer and nanometer scales can be produced using efficient and adaptable electrospinning technology. However, to approximate desirable structures, the construction lacks mechanical sophistication and conformance and requires three-dimensional solitary or multifunctional structures. The diversity of high-performance polymers and blends has enabled the creation of several porous structural conformations for applications in advanced materials science, particularly in biomedicine. Two promising technologies can be combined, such as electrospinning with 3D printing or additive manufacturing, thereby providing a straightforward yet flexible technique for digitally controlled shape-morphing fabrication. The hierarchical integration of configurations is used to imprint complex shapes and patterns onto mesostructured, stimulus-responsive electrospun fabrics. This technique controls the internal stresses caused by the swelling/contraction mismatch in the in-plane and interlayer regions, which, in turn, controls the morphological characteristics of the electrospun membranes. Major innovations in 3D printing, along with additive manufacturing, have led to the production of materials and scaffold systems for tactile and wearable sensors, filtration structures, sensors for structural health monitoring, tissue engineering, biomedical scaffolds, and optical patterning. This review discusses the synergy between 3D printing and electrospinning as a constituent of specific microfabrication methods for quick structural prototypes that are expected to advance into next-generation constructs. Furthermore, individual techniques, their process parameters, and how the fabricated novel structures are applied holistically in the biomedical field have never been discussed in the literature. In summary, this review offers novel insights into the use of electrospinning and 3D printing as well as their integration for cutting-edge applications in the biomedical field.

Bioengineering Composite Aerogel-Based Scaffolds That Influence Porous Microstructure, Mechanical Properties and In Vivo Regeneration for Bone Tissue Application

Tissue regeneration of large bone defects is still a clinical challenge. Bone tissue engineering employs biomimetic strategies to produce graft composite scaffolds that resemble the bone extracellular matrix to guide and promote osteogenic differentiation of the host precursor cells. Aerogel-based bone scaffold preparation methods have been increasingly improved to overcome the difficulties in balancing the need for an open highly porous and hierarchically organized microstructure with compression resistance to withstand bone physiological loads, especially in wet conditions. Moreover, these improved aerogel scaffolds have been implanted in vivo in critical bone defects, in order to test their bone regeneration potential. This review addresses recently published studies on aerogel composite (organic/inorganic)-based scaffolds, having in mind the various cutting-edge technologies and raw biomaterials used, as well as the improvements that are still a challenge in terms of their relevant properties. Finally, the lack of 3D in vitro models of bone tissue for regeneration studies is emphasized, as well as the need for further developments to overcome and minimize the requirement for studies using in vivo animal models.

Emerging Trends in Nanotechnology: Aerogel-Based Materials for Biomedical Applications

At present, aerogel is one of the most interesting materials globally. The network of aerogel consists of pores with nanometer widths, which leads to a variety of functional properties and broad applications. Aerogel is categorized as inorganic, organic, carbon, and biopolymers, and can be modified by the addition of advanced materials and nanofillers. Herein, this review critically discusses the basic preparation of aerogel from the sol-gel reaction with derivation and modification of a standard method to produce various aerogels for diverse functionalities. In addition, the biocompatibility of various types of aerogels were elaborated. Then, biomedical applications of aerogel were focused on this review as a drug delivery carrier, wound healing agent, antioxidant, anti-toxicity, bone regenerative, cartilage tissue activities and in dental fields. The clinical status of aerogel in the biomedical sector is shown to be similarly far from adequate. Moreover, due to their remarkable properties, aerogels are found to be preferably used as tissue scaffolds and drug delivery systems. The advanced studies in areas including self-healing, additive manufacturing (AM) technology, toxicity, and fluorescent-based aerogel are crucially important and are further addressed.

Natural silk nanofibers as building blocks for biomimetic aerogel scaffolds

Protein nanofibers offer great promise for tissue engineering scaffolds owing to biomimetic architecture and exceptional biocompatibility. Natural silk nanofibrils (SNFs) are promising but unexplored protein nanofibers for biomedical applications. In this study, the SNF-assembled aerogel scaffolds with ECM-mimicking architecture and ultra-high porosity are developed based on a polysaccharides-assisted strategy. The SNFs exfoliated from silkworm silks can be utilized as building blocks to construct 3D nanofibrous scaffolds with tunable densities and desirable shapes on a large scale. We demonstrate that the natural polysaccharides can regulate SNF assembly through multiple binding modes, endowing the scaffolds with structural stability in water and tunable mechanical properties. As a proof of concept, the biocompatibility and biofunctionality of the chitosan-assembled SNF aerogels were investigated. The nanofibrous aerogels have excellent biocompatibility, and their biomimetic structure, ultra-high porosity, and large specific surface area endow the scaffolds with enhanced cell viability to mesenchymal stem cells. The nanofibrous aerogels were further functionalized by SNF-mediated biomineralization, demonstrating their potential as a bone-mimicking scaffold. Our results show the potential of natural nanostructured silks in the field of biomaterials and provide a feasible strategy to construct protein nanofiber scaffolds.

Vascular Endothelial Growth Factor-Capturing Aligned Electrospun Polycaprolactone/Gelatin Nanofibers Promote Patellar Ligament Regeneration

Ligament injuries are common in sports and other rigorous activities. It is a great challenge to achieve ligament regeneration after an injury due the avascular structure and low self-renewal capability. Herein, we developed vascular endothelial growth factor (VEGF)-binding aligned electrospun poly(caprolactone)/gelatin (PCL/Gel) scaffolds by incorporating prominin-1-binding peptide (BP) sequence and exploited them for patellar ligament regeneration. The adsorption of BP onto scaffolds was discerned by various techniques, such as Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and confocal laser scanning microscope. The accumulation of VEGF onto scaffolds correlated with the concentration of the peptide in vitro. BP-anchored PCL/Gel scaffolds (BP@PCL/Gel) promoted the tubular formation of human umbilical vein endothelial cells (HUVECs) and wound healing in vitro. Besides, BP containing scaffolds exhibited higher content of CD31+ cells than that of the control scaffolds at 1 week after implantation in vivo. Moreover, BP containing scaffolds improved biomechanical properties and facilitated the regeneration of matured collagen in patellar ligament 4 weeks after implantation in mice. Overall, this strategy of peptide-mediated orchestration of VEGF provides an enticing platform for the ligament regeneration, which may also have broad implications for tissue repair applications. STATEMENT OF SIGNIFICANCE: Ligament injuries are central to sports and other rigorous activities. Given to the avascular nature and poor self-healing capability of injured ligament tissues, it is a burgeoning challenge to fabricate tissue-engineered scaffolds for ligament reconstruction. Vascular endothelial growth factor (VEGF) is pivotal to the neo-vessel formation. However, the high molecular weight of VEGF as well as its short half-life in vitro and in vivo limits its therapeutic potential. To circumvent these limitations, herein, we functionalized aligned electrospun polycaprolactone/gelatin (PCL/Gel)-based scaffolds with VEGF-binding peptide (BP) and assessed their biocompatibility and performance in vitro and in vivo. BP-modified scaffolds accumulated VEGF, improved tube formation of HUVECs, and induced wound healing in vitro, which may have broad implications for regenerative medicine and tissue engineering.