An updated review of functional ingredients of Manuka honey and their value-added innovations

Manuka honey (MH) is a highly prized natural product from the nectar of Leptospermum scoparium flowers. Increased competition on the global market drives MH product innovations. This review updates comparative and non-comparative studies to highlight nutritional, therapeutic, bioengineering, and cosmetic values of MH. MH is a good source of phenolics and unique chemical compounds, such as methylglyoxal, dihydroxyacetone, leptosperin glyoxal, methylsyringate and leptosin. Based on the evidence from in vitro, in vivo and clinical studies, multifunctional bioactive compounds of MH have exhibited anti-oxidative, anti-inflammatory, immunomodulatory, anti-microbial, and anti-cancer activities. There are controversial topics related to MH, such as MH grading, safety/efficacy, implied benefits, and maximum levels of contaminants concerned. Artificial intelligence can optimize MH studies related to chemical analysis, toxicity prediction, multi-functional mechanism exploration and product innovation.

Critical-sized marginal defects around implants in the rabbit mandible

BACKGROUND

The mandible of the rabbit is considered a reliable model to be used to study bone regeneration in defects. The aim of the present study was to evaluate the formation of new bone around implants installed in defects of either 5 or 10 mm in the mandible of rabbits.

MATERIALS AND METHODS

In 12 rabbits, 3 mm deep circumferential defect, either 5 or 10 mm in diameter, were prepared bilaterally and an implant was placed in the center. A collagen membrane was placed to close the entrance. After 10 weeks, biopsies were taken, histological slides were prepared, and different regions of the defects were analyzed.

RESULTS

Similar amounts of new bone were found in both defects. However, most of the 5 mm defects were filled with new bone. New bone was observed closing the entrance of the defect and laid onto the implant surface. Only in a few cases the healing was incomplete. Despite a similar percentage of new bone found within the 10 mm defects, the healing was incomplete in most of the cases, presenting a low rate of bone formation onto the implant surface within the defect. Only one case presented the closure of the entrance.

CONCLUSIONS

The dimensions of the defect strongly influenced the healing so that a circumferential marginal defect of 10 mm around an implant in the mandible body should be considered a critical-sized defect. The presence of the implant and of residues of teeth might have strongly influenced the healing.

Biomaterials for direct cardiac repair-A rapid scoping review 2012-2022

A plethora of biomaterials for heart repair are being tested worldwide for potential clinical application. These therapeutics aim to enhance the quality of life of patients with heart disease using various methods to improve cardiac function. Despite the myriad of therapeutics tested, only a minority of these studied biomaterials have entered clinical trials. This rapid scoping review aims to analyze literature available from 2012 to 2022 with a focus on clinical trials using biomaterials for direct cardiac repair, i.e., where the intended function of the biomaterial is to enhance the repair of the endocardium, myocardium, epicardium or pericardium. This review included neither biomaterials related to stents and valve repair nor biomaterials serving as vehicles for the delivery of drugs. Surprisingly, the literature search revealed that only 8 different biomaterials mentioned in 23 different studies out of 7038 documents (journal articles, conference abstracts or clinical trial entries) have been tested in clinical trials since 2012. All of these, intended to treat various forms of ischaemic heart disease (heart failure, myocardial infarction), were of natural origin and most used direct injections as their delivery method. This review thus reveals notable gaps between groups of biomaterials tested pre-clinically and clinically. STATEMENT OF SIGNIFICANCE: Rapid scoping review of clinical application of biomaterials for cardiac repair. 7038 documents screened; 23 studies mention 8 different biomaterials only. Biomaterials for repair of endocardium, myocardium, epicardium or pericardium. Only 8 different biomaterials entered clinical trials in the past 10 years. All of the clinically translated biomaterials were of natural origin.

Simultaneous sinus elevation and immediate implant placement without biomaterial: A technical note

Sinus floor elevation is widely considered as one of the most reliable and predictable procedures for augmenting posterior maxillary bone volume before implant placement. The lateral window technique is often described as the gold standard, especially when dealing with limited residual bone height. Traditionally, severe vertical defects in the posterior maxilla required a two-stage approach: first elevating the sinus membrane with biomaterial, followed by a second surgery for implant placement. This article introduces an innovative approach to the lateral sinus lift procedure, enabling simultaneous implant placement in sites with less than 5 mm of remaining bone height. This original one-stage surgical approach is interesting because it does not involve grafting of any biomaterial into the sinus. Its main objectives are to enhance safety and predictability while reducing the risk of post-operative infections. However, it's essential to emphasize that achieving an ideal implant position with adequate primary stability is crucial for its viability.

Applications of graphene oxide and reduced graphene oxide in advanced dental materials and therapies

The graphene family of nanomaterials acquired significant attention in the field of dentistry due to a range of interesting properties. Graphene oxide (GO) and reduced graphene oxide (rGO) are the major graphene derivatives that are widely used in dental applications. These derivatives exhibit excellent mechanical properties, superior biocompatibility, good antibacterial properties, extreme chemical stability, and favorable tribological characteristics, thus representing highly materials for dentistry. The amphiphilic nature of GO allows covalent and noncovalent modifications that are favorable for biomedical applications. Graphene can influence the differentiation of dental pulp stem cells (DPSCs) and enhance the properties of other biomaterials. Here, we review the dental applications of GO or rGO with regards to antimicrobial activity, therapeutic drug delivery, restorative dentistry, implants, pulp regeneration, bone regeneration, periodontal tissue regeneration, biosensors, and tooth whitening.

An innovative 3D hydroxyapatite patient-specific implant for maxillofacial bone reconstruction: A case series of 13 patients

The study aimed to evaluate and discuss the use of an innovative PSI made of porous hydroxyapatite, with interconnected porosity promoting osteointegration, called MyBone Custom® implant (MBCI), for maxillofacial bone reconstruction. A multicentric cohort of 13 patients underwent maxillofacial bone reconstruction surgery using MBCIs for various applications, from genioplasty to orbital floor reconstruction, including zygomatic and mandibular bone reconstruction, both for segmental defects and bone augmentation. The mean follow-up period was 9 months (1-22 months). No infections, displacements, or postoperative fractures were reported. Perioperative modifications of the MBCIs were possible when necessary. Additionally, surgeons reported significant time saved during surgery. For patients with postoperative CT scans, osteointegration signs were visible at the 6-month postoperative follow-up control, and continuous osteointegration was observed after 1 year. The advantages and disadvantages compared with current techniques used are discussed. MBCIs offer new bone reconstruction possibilities with long-term perspectives, while precluding the drawbacks of titanium and PEEK. The low level of postoperative complications associated with the high osteointegration potential of MBCIs paves the way to more extensive use of this new hydroxyapatite PSI in maxillofacial bone reconstruction.

Acemannan-containing bioactive resin modified glass ionomer demonstrates satisfactory physical and biological properties

Background/purpose

Resin-modified glass ionomers (RMGIs) have been recommended as liner and cement to provide the teeth with mechanical support, a chemical barrier, and thermal insulation. Acemannan, the main polysaccharide extracted from Aloe vera, is a promising inductive material in vitro and in vivo. This study aimed to develop acemannan-containing bioactive resin-modified glass ionomers (RMGIs).

Materials and methods

Acemannan (3%, 5%, and 10%) was added to the three types of RMGIs (RU-HBM1/Fuji II LC/Vitrebond) to generate 3%, 5%, and 10% aceRMGIs (aceRU/aceFuji/aceVB). The materials were evaluated for depth of cure/flexural strength/cumulative fluoride ion release. Cell viability and vascular endothelial growth factor (VEGF) and bone morphogenetic protein-2 (BMP-2) secretion were determined using MTT/apoptosis/necrosis assays, and ELISA kits, respectively. RMGI without acemannan were used as controls.

Results

The aceRMGIs met the ISO requirements for depth of cure and flexural strength. Adding 10% acemannan increased the cumulative fluoride release in the RU and FJ groups, but slightly decreased it in the VB group (P < 0.05). The MTT assay revealed 10% aceRU and all aceFJ groups significantly increased cell viability compared with each control group (P < 0.05). Apoptosis/necrosis assay showed the biocompatibility of all aceRMGIs. Adding acemannan to RMGIs significantly induced VEGF expression in a dose dependent manner while 5% and 10% aceRU significantly induced BMP-2 expression compared with RU group (P < 0.05).

Conclusion

We conclude that 5-10% acemannan in RMGI is the optimal concentration based on its physical properties and ability to induce pulp cell proliferation and growth factor secretion.

Localized trans-browning and pro-angiogenesis inductive self-assembled collagen resveratrol bio-matrix for tissue repair and regeneration in obese conditions

The present study probes into the complexities of wound management in obesity by proposing a novel biomaterial designed to reprogram the altered skin physiology prevalent in obese conditions. The strategy involves the development of a multifunctional biomaterial addressing issues such as excessive exudate, pressure ulcers, and reduced vascularity. The bio-matrix demonstrates the localized transformation of white adipocytes through trans-browning, coupled with the simultaneous induction of angiogenesis at obese wound sites, resulting in expedited wound closure. The collagen bio-matrices, stabilized with Resveratrol (Rsv), exhibit remarkable thermal, mechanical, and biological stability. The porous 3D microstructure of the Rsv-stabilized collagen bio-matrix closely resembled the natural extracellular matrix, facilitating effective cell adhesion. The bio-matrix exhibited the unique capability to induce localized thermogenesis in the subcutaneous fat layer while concurrently activating angiogenesis. In vivo wound healing studies conducted on DIO-C57BL6 mice demonstrated complete healing within 10 days, showcasing accelerated tissue regeneration, blood vessel formation, robust collagen deposition, and significant activation of browning in the subcutaneous adipose layer. This study introduces the concept of tailored regenerative biomaterials with the ability to reprogram the challenging wound environment associated with obesity. This innovative approach opens up new avenues for enhanced wound care strategies, particularly for bariatric patients.

Isolation and characterization of novel bioplasticizers from rose (Rosa damascena Mill.) petals and its suitability investigation for poly (butylene adipate-co-terephthalate) biofilm applications

The current growing environmental awareness has forced the use of biodegradable plasticizers, which are sustainable and abundant in plant resources. Rose petal plasticizers (RPP) act as an actual substitute for chemical plasticizers in this situation as they are biocompatible and biodegradable. Chemical procedures like amination, alkalization, and surface catalysis are used to extract the natural emollients from rose petals. XRD, FT-IR, and UV studies were used to understand the characteristics of the rose petal plasticizer. Based on the XRD data, the RPP's crystallinity size (CS) and crystallinity index (CI) values were determined to be 9.36 nm and 23.87%, respectively. The surface morphology of the isolated plasticizer is investigated using SEM, EDAX analysis and AFM. RPP surface pores with rough surfaces are visible in SEM images, which make them appropriate for plasticizing novel bioplastics with superior mechanical qualities. The plasticizer's heat degradation behaviour is investigated using thermogravimetric and differential thermogram analysis curves. Following the characterization of the synthesised molecules, the plasticization effect was examined using a biodegradable polymer matrix called poly (butylene adipate-co-terephthalate) (PBAT). The reinforcement interface was also examined using scanning electron microscopy analysis. RPP-reinforced films demonstrated greater flexibility and superior surface compatibility at a 5% loading compared to PBAT-only films. Based on a number of reported features, RPP could be a great plasticizer to address future environmental problems.

Multifunctional embelin- poly (3-hydroxybutyric acid) and sodium alginate-based core-shell electrospun nanofibrous mat for wound healing applications

In this study, coaxial electrospinning is employed to make core-shell fibers, which represents a major advance in biomaterial innovation. Fibers that combine a protective shell and a therapeutic agent-loaded core, herald a revolutionary era in tissue engineering and wound care. Besides supporting cell growth, these fibers also preserve sterility, which makes them ideal for advanced wound dressings. We used embelin as the basis for this study because of its natural antibacterial properties. Its effectiveness in inhibiting the growth of bacteria made it the ideal candidate for our research. We have synthesized core-shell nanofibers that contain Sodium Alginate (SAL) in a Poly (ethylene oxide) (PEO) shell and Embelin in a Poly (3-hydroxybutyric acid) (PHB) core, which exhibit the homogeneity and flawless structure required for biomedical applications. When using SAL-PEO and EMB-PHB solutions dissolved in 1,1,1,3,3,3 hexafluoro-2-propanol (HFIP), high consistency in results can be achieved. A biocompatibility study was conducted using NIH-3T3 fibroblasts, which demonstrated remarkable adhesion and proliferation, with over 95 % growth supporting both PHB + SAL-PEO and EMB-PHB + SAL-PEO fibers. In addition, the scaffold loaded with Embelin shows strong antibacterial activity and cytocompatibility. The combined activity demonstrates the potential of EMB-PHB + SAL-PEO fibers in wound healing, where tissue regeneration and preservation of sterility are crucial. The optimized concentration of Embelin within these scaffolds demonstrates robust antibacterial efficacy while exhibiting minimal toxicity, thus positioning them as highly promising candidates for a wide range of biological applications, including wound healing.

In-situ photo-crosslinkable elastomer based on polyalphaolefin/halloysite nanohybrid

In this research, new injectable and in situ photocurable elastomeric nanohybrids have been fabricated from polyalphaolefin (PAO) resins and halloysite nanofiller. In this regard, the co-oligomerization of long α-olefin monomers (C6, C8 and C10) with alkenol counterparts was carried out via a simple cationic route to provide OH-functionalized PAOs. The newly formed PAO type copolymer resins as well as halloysite nanoclay were then equipped with photocurable CC bonds containing an acrylate moiety. After the characterization of the final chemical substances and also of the intermediate structures, experimentally and computationally by means of Density Functional Theory (DFT) calculations, the neat treated PAO and PAO/halloysite nanohybrids were subjected to a curing process by visible light irradiation (λ ∼ 475 nm, blue light). The crosslinking efficiency of the neat resins and the formed nanohybrid was evaluated using shrinkage strain-time curves and equilibrium swelling method. The suggested nanohybrid is not only biocompatible (96 % in the MTT assay), and hydrophilic (with a water contact angle of 61°), but also exhibits an easy, fast and robust curing process with great potential for coating and sealing technologies for medical devices.

Biomimetic design of fibril-forming non-immunogenic collagen like proteins for tissue engineering

Collagen, a key component of extracellular matrix serves as a linchpin for maintaining structural integrity and functional resilience. Concerns over purity and immunogenicity of animal-derived collagens have spurred efforts to develop synthetic collagen-based biomaterials. Despite several collagen mimics, there remains limited exploration of non-immunogenic biomaterials with the capacity for effective self-assembly. To combat the lacuna, collagen like protein (CLP) variants were rationally designed and recombinantly expressed, incorporating human telopeptide sequences (CLP-N and CLP-NC) and bioactive binding sites (CLP-NB). Circular dichroism analyses of the variants confirmed the triple helical conformation, with variations in thermal stability and conformation attributed to the presence of telopeptides at one or both ends of CLP. The variants had propensity to form oligomers, setting the stage for fibrillogenesis. The CLP variants were biocompatible, hemocompatible and supported cell proliferation and migration, particularly CLP-NB with integrin-binding sites. Gene expression indicated a lack of significant upregulation of inflammatory markers, highlighting the non-immunogenic nature of these variants. Lyophilized CLP scaffolds maintained their triple-helical structure and offered favorable biomaterial characteristics. These results accentuate the potential of designed CLP variants in tissue engineering, regenerative medicine and industrial sectors, supporting the development of biocompatible scaffolds and implants for therapeutic and cosmetic purposes.

Apigenin Self-Assembled Collagen Biomatrix for Reprogramming the Obese Wound Microenvironment for Its Management and Repair

Wound management in obesity is complicated by excessive exudates from wounded areas, pressure ulcerations due to stacking of the fat layer, and vascular rarefaction. The current study explored the development of biomaterials for reprogramming the altered wound microenvironment under obese conditions. Self-assembled collagen biomatrix with trans and de novo browning activator, apigenin, was fabricated as a soft tissue regenerative wound dressing material. The as-synthesized self-assembled collagen biomatrix exhibited excellent thermal, mechanical, and biological stability with a superior wound exudate absorption capacity. The apigenin self-assembled collagen biomatrix exhibited porous 3-D microstructure that mimicked the extracellular matrix that promoted cell adhesion and proliferation. The apigenin self-assembled collagen multifunctional biomatrix triggered adaptive localized thermogenesis in the subcutaneous fat layer, resulting in the activation of angiogenesis and fibroblast spreading and migration. The in vivo wound healing assay performed in DIO-C57BL6 mice showed faster tissue regeneration within 9 days, with well-defined neo-epidermis, blood vessel formation, thick collagen deposition, minimal inflammation, and significant activation of browning in the subcutaneous adipose layer. This study paves the way forward for the development of specialized regenerative biomatrices that reprogram the obese wound bed for faster tissue regeneration.

Recent advances in nanomaterial-driven strategies for diagnosis and therapy of vascular anomalies

Nanotechnology has demonstrated immense potential in various fields, especially in biomedical field. Among these domains, the development of nanotechnology for diagnosing and treating vascular anomalies has garnered significant attention. Vascular anomalies refer to structural and functional anomalies within the vascular system, which can result in conditions such as vascular malformations and tumors. These anomalies can significantly impact the quality of life of patients and pose significant health concerns. Nanoscale contrast agents have been developed for targeted imaging of blood vessels, enabling more precise identification and characterization of vascular anomalies. These contrast agents can be designed to bind specifically to abnormal blood vessels, providing healthcare professionals with a clearer view of the affected areas. More importantly, nanotechnology also offers promising solutions for targeted therapeutic interventions. Nanoparticles can be engineered to deliver drugs directly to the site of vascular anomalies, maximizing therapeutic effects while minimizing side effects on healthy tissues. Meanwhile, by incorporating functional components into nanoparticles, such as photosensitizers, nanotechnology enables innovative treatment modalities such as photothermal therapy and photodynamic therapy. This review focuses on the applications and potential of nanotechnology in the imaging and therapy of vascular anomalies, as well as discusses the present challenges and future directions.

Powdered silk: A promising biopolymer for the treatment of dye contaminated water

Discharge of textile dye effluents into water bodies is creating stress to aquatic life and contaminating water resources. In this study, a new biopolymer adsorbent silk fibroin (SF) was prepared from Bombyx mori silk fibroin (SF) and used for removal of Solochrome Black-T (SB-T) from water. This innovative adsorbent exhibits an exceptional adsorption capacity of 20.08 mg/g, achieving a removal efficiency of approximately 98.6 % within 60 min. Notably, the powdered SF adsorbent demonstrates rapid kinetics, surpassing the performance of previously reported similar adsorbents in adsorption capacity and reaction speed. The molecular weight and particle diameter of the material were observed to be > 1.243 kDa and 3 μm, respectively. The experimental investigations were performed on different parameters, viz., adsorbent dosage, contact time, repeatability, and desorption-adsorption study. The experimental data well fit for the Langmuir model (R2 = 0.937, qmax = 20.08 mg/g) and the pseudo-second-order kinetics (R2 = 0.921 and qe = 1.496 mg/g). Compared to the adsorbents reported in the literature, the newly prepared SF showed high adsorption capacity and faster kinetics to address real-life situations. The novelty of this work extends beyond its remarkable adsorption capabilities. The SF adsorbent offers a cost-effective, sustainable solution and regenerable adsorption material with minimal negative environmental impacts. This regenerability, with its versatility and broad applicability, positions powdered SF fibroin as a transformative technology in water treatment and environmental protection.

Pectin/sodium alginate films tailored with Acetyl-11-keto-beta-boswellic acid for active packaging

The present study aimed to develop food packaging films by using a combination of pectin (PE) and sodium alginate (SA) enriched with Acetyl-11-keto-beta-boswellic acid (AKBA) as a functional or active ingredient. The fabricated films underwent comprehensive evaluation of their morphological, chemical, mechanical, barrier, optical, thermal, antioxidant, and antimicrobial properties. SEM and FTIR analysis showed that AKBA had good compatibility with film-forming components. The AKBA-loaded film samples exhibited a decrease in their barrier properties and tensile strength, but enhancements in both elongation at break and thickness values was observed. With the addition of AKBA, a significant increase (p < 0.05) in the ultraviolet barrier properties of the films and total colour variation (ΔE) was observed. TGA analysis of the films unveiled an improvement in thermal resistance with the incorporation of AKBA. Moreover, the films loaded with AKBA exhibited potent antioxidant activity in the ABTS and DPPH assay methods. Disk diffusion analysis showed the antimicrobial activity of AKBA-loaded films against P. aeruginosa, highlighting the potential of AKBA as a natural antimicrobial agent for the safety of food products. The results demonstrate the practical application of PE and SA active films loaded with AKBA, particularly within the food packaging industry.

Steric stabilization of bioactive nanoparticles using elastin-like polypeptides

Elastin-like polypeptides (ELP) are versatile, thermo-responsive polymers that can be conjugated to virtually any therapeutic cargo. Derived from short amino-acid sequences and abundant in humans, certain ELPs display low immunogenicity. Substrates for endogenous proteases, ELPs are biodegradable and thus, are candidate biomaterials. Peptides and proteins can be directly coupled with ELPs through genetic engineering, while other polymers and small molecules can be appended through covalent bioconjugation or non-covalent complexation. ELPs that phase separate at physiological temperatures can form the core of nano assemblies; however, ELPs that remain soluble can sterically stabilize the corona of a variety of nanoparticles. Nanoparticles with ELPs at their corona promote colloids with favorable pharmacokinetic (PK) properties that enables therapeutic efficacy with intermittent administration. This review highlights a comprehensive spectrum of ELP fusions shown to stabilize the solubility, and sometimes bioactivity, of their cargo - with a focus on biophysical properties that underlie their therapeutic effects.

Effects of boric acid on alveolar sockets filling after dental extraction in rats

PURPOSE

After extraction, dental alveolus filling aims to reduce bone loss and maintain the alveolus volume during patient rehabilitation. Boric acid (BA) is a boron-derived compound with osteogenic properties and an interesting candidate for alveoli filling. This study aims to investigate the osteogenic capacity of the local application of BA in dental socket preservation.

METHODS

Thirty-two male Wistar rats were submitted to upper right incisor extraction and randomly divided into four groups (n = 8): control group (no intervention), BA (8 mg/kg) socket filling, bone graft (Cerabone®, Botiss, Germany), and BA + bone graft socket filling. Animals were euthanized 28 days after dental extraction. MicroCT and histological analysis were performed to evaluate the newly formed bone on the dental alveolus.

RESULTS

MicroCT analysis demonstrated that bone volume fraction (BV/TV), bone surface (BS), bone surface/bone volume ratio (BS/BV), bone surface density (BS/TV), trabecular thickness (Tb.Th), total bone porosity (Po-tot), and total volume of pore space (Po.V(tot)) from BA and BA + bone graft rats were significantly different from the control group. Histological evaluation displayed a delayed bone repair in BA rats, with the presence of connective tissue and inflammatory infiltrate. However, the BA + bone graft group demonstrated histological aspects like the bone graft animals, with less organized osteoblasts, suggesting inferior bone repair.

CONCLUSION

Osteogenic capacity did not depend on the BA local application after 28 days of dental extraction. The presence of inflammation in the BA group can represent toxicity induced by the substance dosage used.

3D printed bioabsorbable composite scaffolds of poly (lactic acid)-tricalcium phosphate-ceria with osteogenic property for bone regeneration

The fabrication of customized implants by additive manufacturing has allowed continued development of the personalized medicine field. Herein, a 3D-printed bioabsorbable poly (lactic acid) (PLA)- β-tricalcium phosphate (TCP) (10 wt %) composite has been modified with CeO2 nanoparticles (CeNPs) (1, 5 and 10 wt %) for bone repair. The filaments were prepared by melt extrusion and used to print porous scaffolds. The nanocomposite scaffolds possessed precise structure with fine print resolution, a homogenous distribution of TCP and CeNP components, and mechanical properties appropriate for bone tissue engineering applications. Cell proliferation assays using osteoblast cultures confirmed the cytocompatibility of the composites. In addition, the presence of CeNPs enhanced the proliferation and differentiation of mesenchymal stem cells; thereby, increasing alkaline phosphatase (ALP) activity, calcium deposition and bone-related gene expression. Results from this study have shown that the 3D printed PLA-TCP-10%CeO2 composite scaffold could be used as an alternative polymeric implant for bone tissue engineering applications: avoiding additional/revision surgeries and accelerating the regenerative process.

Implants coating strategies for antibacterial treatment in fracture and defect models: A systematic review of animal studies

Objective

Fracture-related infection (FRI) remains a major concern in orthopaedic trauma. Functionalizing implants with antibacterial coatings are a promising strategy in mitigating FRI. Numerous implant coatings have been reported but the preventive and therapeutic effects vary. This systematic review aimed to provide a comprehensive overview of current implant coating strategies to prevent and treat FRI in animal fracture and bone defect models.

Methods

A literature search was performed in three databases: PubMed, Web of Science and Embase, with predetermined keywords and criteria up to 28 February 2023. Preclinical studies on implant coatings in animal fracture or defect models that assessed antibacterial and bone healing effects were included.

Results

A total of 14 studies were included in this systematic review, seven of which used fracture models and seven used defect models. Passive coatings with bacteria adhesion resistance were investigated in two studies. Active coatings with bactericidal effects were investigated in 12 studies, four of which used metal ions including Ag+ and Cu2+; five studies used antibiotics including chlorhexidine, tigecycline, vancomycin, and gentamicin sulfate; and the other three studies used natural antibacterial materials including chitosan, antimicrobial peptides, and lysostaphin. Overall, these implant coatings exhibited promising efficacy in antibacterial effects and bone formation.

Conclusion

Antibacterial coating strategies reduced bacterial infections in animal models and favored bone healing in vivo. Future studies of implant coatings should focus on optimal biocompatibility, antibacterial effects against multi-drug resistant bacteria and polymicrobial infections, and osseointegration and osteogenesis promotion especially in osteoporotic bone by constructing multi-functional coatings for FRI therapy.

The translational potential of this paper

The clinical treatment of FRI is complex and challenging. This review summarizes novel orthopaedic implant coating strategies applied to FRI in preclinical studies, and offers a perspective on the future development of orthopaedic implant coatings, which can potentially contribute to alternative strategies in clinical practice.

Critical aggregation concentration can be a predictor of doxorubicin delivery performance of self-assembling amphiphilic peptides with different hydrophobic tails

Amphiphilic peptides hold great potential as drug delivery systems. A popular peptide design approach has been to place amino acids in the peptide sequence based on their known properties. On the other hand, the directed discovery approach aims to screen a sequence space for a desired property. However, screening amphiphilic peptides for desirable drug delivery properties is not possible without a quantity that is predictive of these properties. We studied the predictive power of critical aggregation concentration (CAC) values on the drug delivery performance of a series of amphiphilic peptides with different hydrophobic tails and close CAC values. The CAC values were predicted by our previously developed model and doxorubicin was used as a model hydrophobic drug. All peptides showed close drug loading, entrapment efficiency, and release profile. They also formed similar spherical particles by assembling in reverse β-sheet arrangements regardless of drug presence. Moreover, the assembled particles were able to accumulate doxorubicin inside ordinary as well as drug-resistant breast cancer cells and enhance its toxicity up to 39 and 17 folds, respectively. It can be concluded that similar drug delivery properties displayed by the peptides can be attributed to their similar hydrophilic-lipophilic balance as reflected in their close CAC values.

Bone Regeneration with Mesenchymal Stem Cells in Scaffolds: Systematic Review of Human Clinical Trials

The aim of the study is to determine the effectiveness of stem cells in scaffolds in the treatment of bone deficits, in regard of bone regeneration, safety, rehabilitation and quality of life in humans. The systematic review was conducted in accordance with PRISMA 2020. A systematic search was conducted in three search engines and two registries lastly in 29-9-2022.for studies of the last 15 years. The risk of bias was assessed with RoB-2, ROBINS- I and NIH Quality of Before-After (Pre-Post) Studies with no Control group. The certainty of the results was assessed with the GRADE assessment tool. Due to heterogeneity, the results were reported in tables, graphs and narratively. The study protocol was published in PROSPERO with registration number CRD42022359049. Of the 10,091 studies retrieved, 14 were meeting the inclusion criteria, and were qualitatively analyzed. 138 patients were treated with mesenchymal stem cells in scaffolds, showing bone healing in all cases, and even with better results than the standard care. The adverse events were mild in most cases and in accordance with the surgery received. When assessed, there was a rehabilitation of the deficit and a gain in quality of life was detected. Although the heterogeneity between the studies and the small number of patients, the administration of mesenchymal stem cells in scaffolds seems safe and effective in the regeneration of bone defects. These results pave the way for the conduction of more clinical trials, with greater number of participants, with more standardized procedures.

Percutaneous Alginate Hydrogel Endomyocardial Injection with a Novel Dedicated Catheter Delivery System: An Animal Feasibility Study

The objective of this preclinical study was to evaluate the feasibility and safety of transcatheter endocardial alginate hydrogel injection (TEAi) in a large animal model, utilizing the high-stiffness XDROP® alginate hydrogel in combination with the dedicated EndoWings® catheter-based system. All swine (n = 9) successfully underwent TEAi without complications. Acute results from a subset of animals (n = 5) demonstrated the ability of the catheter to access a wide range of endomyocardial areas and achieve consecutive circumferential hydrogel distribution patterns within the mid-left ventricular wall. Histological examinations at 6 months (n = 4) demonstrated that the XDROP® remained localized within the cardiac tissue. In addition, serial echocardiographic imaging showed that XDROP® had no adverse impacts on LV systolic and diastolic functions. In conclusion, this innovative combination technology has the potential to overcome the translational barriers related to alginate hydrogel delivery to the myocardium.

Implant-Based Breast Reconstruction with Bovine Pericardium: Our Approach Using Tutopatch® and Review of Literature

OBJECTIVES

To describe the usage and advantages of bovine pericardium mesh (Tutopatch®) in breast reconstruction and to compare different mesh materials used in immediate breast reconstruction.

METHODS

Our study involved a single-center, retrospective analysis of 103 patients (comprising 114 breasts) who underwent immediate implant-based breast reconstruction using bovine pericardium bovine matrix. The procedures were performed by the same surgical team between April 2018 and May 2023.

RESULTS

The rates of early and late complications were examined after a median follow-up period of 30.2 ± 5.5 months. The results revealed that the rates of early complications stood at 9.7%, while late complications were observed in 14.5% of the cases. The most common late complication was seroma formation (7.7%) which six were resolved without any surgical intervention.

CONCLUSION

Tutopatch® can be used as an extension of the muscle to cover the prosthesis. It forms an extra layer over the silicone implant that helps to decrease the complications as capsular contracture and implant exposure. It also represents a significant 85 % reduction in cost when compared to a similar-sized mesh materials.

LEVEL OF EVIDENCE IV

This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Papain Covalent Immobilization in Bacterial Cellulose Films as a Wound Dressing

Ideally, the dressings used in the clinic have characteristics that help the wound closure process. Among several factors that affect the success of this healing process, there is debridement. It manages the wound bed components and the re-epithelialization process. Still, the property of debridement is not generally associated with dressings. Here, we show a chemically modified bacterial cellulose film conjugated to a proteolytic enzyme, papain, as a dressing with debridement properties. Bacterial cellulose films were reacted with a spacer derived from succinic acid and finally had this enzyme covalently immobilized in its structure by an amide bond. FT-IR and UV-vis showed bands typically of bioconjugated polymer. Enzymatic immobilization was very effective under the conditions applied with high yield (33% w/w), and these remained activated after the coupling reaction. The bacterial cellulose film with the enzyme papain attached to it was also very compatible with fibroblast cells, suggesting that it could be a promising wound dressing material for future research.

Itaconate and citrate releasing polymer attenuates foreign body response in biofabricated cardiac patches

Application of cardiac patches to the heart surface can be undertaken to provide support and facilitate regeneration of the damaged cardiac tissue following ischemic injury. Biomaterial composition is an important consideration in the design of cardiac patch materials as it governs host response to ultimately prevent the undesirable fibrotic response. Here, we investigate a novel patch material, poly (itaconate-co-citrate-co-octanediol) (PICO), in the context of cardiac implantation. Citric acid (CA) and itaconic acid (ITA), the molecular components of PICO, provided a level of protection for cardiac cells during ischemic reperfusion injury in vitro. Biofabricated PICO patches were shown to degrade in accelerated and hydrolytic conditions, with CA and ITA being released upon degradation. Furthermore, the host response to PICO patches after implantation on rat epicardium in vivo was explored and compared to two biocompatible cardiac patch materials, poly (octamethylene (anhydride) citrate) (POMaC) and poly (ethylene glycol) diacrylate (PEGDA). PICO patches resulted in less macrophage infiltration and lower foreign body giant cell reaction compared to the other materials, with corresponding reduction in smooth muscle actin-positive vessel infiltration into the implant region. Overall, this work demonstrates that PICO patches release CA and ITA upon degradation, both of which demonstrate cardioprotective effects on cardiac cells after ischemic injury, and that PICO patches generate a reduced inflammatory response upon implantation to the heart compared to other materials, signifying promise for use in cardiac patch applications.

Age-related changes on physicochemical properties of the artificial vitreous humor: A practical tool for enhancing ex vivo studies

The vitreous humor (VH) is a hydrophilic, jelly-like ocular fluid, which is located in the posterior chamber of the eye. The rheological, structural, and chemical properties of VH change significantly during aging, which further causes eye-associated diseases and could be a potential indicator for various diseases. In this study, artificial VH (A-VH) samples were created by taking into account different age groups to observe age-related changes in the physicochemical properties of these samples. This study aimed to measure the physicochemical properties of age-dependently prepared A-VH samples to determine the changes with aging in the physicochemical properties of A-VH samples. Phosphate-buffered saline (PBS)-based A-VH samples were prepared in three types representing adult, middle-aged, and elder individuals. Age-related changes in physicochemical properties (surface tension, osmolality, pH, relative viscosity, density, and refractive index) were analyzed by related equipment. The A-VH samples, prepared using PBS, showed strong similarity to authentic VH in terms of physicochemical properties. While the age-related changes studies have revealed some discrepancies between age-dependently prepared A-VH samples in terms of surface tension, osmolality, relative viscosity, and pH with high correlation coefficients (r2 > 0,94), density and refractive index values did not show any significant differences and correlation between types of A-VH representing 3 age groups. In conclusion, age-dependent A-VH samples were created successfully to use ex vivo method development studies, and the influence of aging on the physicochemical properties of VH was demonstrated as well.

Critical-sized marginal defects around implants treated with xenografts in rabbits

BACKGROUND

Healing of critical-size defects is a well-known problem that has been challenged in several studies. The aim of the experiment was to evaluate bone formation and osseointegration of implants installed in critical defects of the mandibular body simultaneously grafted with Bio-Oss® or Cerabone®.

MATERIAL AND METHODS

Defects, 10 mm wide and 3 mm deep, were prepared at both lateral aspects of the mandible in 12 rabbits. One implant was installed in the center of the defect, and bovine xenografts produced either at low (Bio-Oss®; Low-T) or high (Cerabone®; High-T) temperatures were used to fill the defects. A collagen membrane was placed to cover the sites. Healing was evaluated 10 weeks after surgery.

RESULTS

In both groups, most sites showed optimal healing with closure of the coronal entrance of the defects. However, residual defects occupied by soft tissues and biomaterial particles were observed, even though generally limited to some regions of the defect. Osseointegration of the implant surface in the region of the defect was poor in both groups.

CONCLUSIONS

Circumferential marginal critical-size defects around implants filled with bovine xenografts presented regions with a complete healing in both groups. However, the healing was not complete at all regions in most defects; therefore, a complete optimal healing of critical-size marginal defects cannot be predicted.

Exosome: From biology to drug delivery

In recent years, different advancements have been observed in nanosized drug delivery systems. Factors such as stability, safety and targeting efficiency cause hindrances in the clinical translation of these synthetic nanocarriers. Therefore, researchers employed endogenous nanocarriers like exosomes as drug delivery vehicles that have an inherent ability to target more efficiently after appropriate functionalization and show higher biocompatibility and less immunogenicity and facilitate penetration through the biological barriers more quickly than the other available carriers. Exosomes are biologically derived lipid bilayer-enclosed nanosized extracellular vesicles (size ranges from 30 to 150 nm) secreted from both prokaryotic and eukaryotic cells and appears significantly in the extracellular space. These EVs (extracellular vesicles) can exist in different sources, including mammals, plants and microorganisms. Different advanced techniques have been introduced for the isolation of exosomes to overcome the existing barriers present with conventional methods. Extensive research on the application of exosomes in therapeutic delivery for treating various diseases related to central nervous system, bone, cancer, skin, etc. has been employed. Several studies are on different stages of clinical trials, and many exosomes patents have been registered.

Beneficial medicinal effects and material applications of rose

Rose is a beautiful and fragrant plant with a variety of medicinal and substance uses. Various parts of rose such as fruits, flowers, leaves, and bark can be used in various product development, including cosmetics, food, pharmaceuticals, and engineering. The medical benefits of roses include the treatment of inflammation, diabetes, dysmenorrhea, depression, stress, seizures, and aging. Rose water is precious beauty water for skin care and has antibacterial effects on various microbiota. The surface of a rose petal exhibits a hierarchical structure comprising microscale papillae, with each papilla further featuring intricate nanofolds. With this structural feature, rose petals have high water contact angles together with antagonistic wetting properties. The hierarchical structures of rose petals were shown to have anti-reflection and light-harvesting abilities, which have the potential to be materials for various electronic products. Rose petals are an excellent biomimetic/bioinspired material that can be applied to the popular material graphene. This paper reviews the medical function and material application of roses. During the COVID-19 pandemic, medical materials or food shortages have become a global issue. Natural biomaterials could be a good alternative. Roses, with so many benefits, definitely deserve more exploration and promotion.

Porosity-permeability tensor relationship of closely and randomly packed fibrous biomaterials and biological tissues: Application to the brain white matter

The constitutive model for the porosity-permeability relationship is a powerful tool to estimate and design the transport properties of porous materials, which has attracted significant attention for the advancement of novel materials. However, in comparison with other materials, biomaterials, especially natural and artificial tissues, have more complex microstructures e.g. high anisotropy, high randomness of cell/fibre dimensions/position and very low porosity. Consequently, a reliable microstructure-permeability relationship of fibrous biomaterials has proven elusive. To fill this gap, we start a mathematical derivation from the fundamental brain white matter (WM) formed by nerve fibres. This is augmented by a numerical characterisation and experimental validations to obtain an anisotropic permeability tensor of the brain WM as a function of the tissue porosity. A versatile microstructure generation software (MicroFiM) for fibrous biomaterial with complex microstructure and low porosity was built accordingly and made freely accessible here. Moreover, we propose an anisotropic poro-hyperelastic model enhanced by the newly defined porosity-permeability tensor relationship which precisely captures the tissues macro-scale permeability changes due to the microstructural deformation in an infusion scenario. The constitutive model, theories and protocols established in this study will both provide improved design strategies to tailor the transport properties of fibrous biomaterials and enable the non-invasive characterisation of the transport properties of biological tissues. This will lead to the provision of better patient-specific medical treatments, such as drug delivery. STATEMENT OF SIGNIFICANCE: Due to the microstructural complexity, a reliable microstructure-permeability relationship of fibrous biomaterials has proven elusive, which hinders our way of tuning the fluid transport property of the biomaterials by directly programming their microstructure. The same problem hinders non-invasive characterisations of fluid transport properties in biological tissues, which can significantly improve the efficiency of treatments e.g. drug delivery, directly from the tissues accessible microstructural information, e.g. porosity. Here, we developed a validated mathematical formulation to link the random microstructure to a fibrous material's macroscale permeability tensor. This will advance our capability to design complex biomaterials and make it possible to non-invasively characterise the permeability of living tissues for precise treatment planning. The newly established theory and protocol can be easily adapted to various types of fibrous biomaterials.

Recent advances in photo-crosslinkable methacrylated silk (Sil-MA)-based scaffolds for regenerative medicine: A review

Silks fibroin can be chemically modified through amino acid side chains to obtain methacrylated silk (Sil-MA). Sil-MA could be processed into a variety of scaffold forms and combine synergistically with other biomaterials to form composites vehicle. The advent of Sil-MA material has enabled impressive progress in the development of various scaffolds based on Sil-MA type to imitate the structural and functional characteristics of natural tissues. This review highlights the reasonable design and bio-fabrication strategies of diverse Sil-MA-based tissue constructs for regenerative medicine. First, we elucidate modification methodology and characteristics of Sil-MA. Next, we describe characteristics of Sil-MA hydrogels, and focus on the design approaches and formation of different types of Sil-MA-based hydrogels. Thereafter, we present an overview of the recent advances in the application of Sil-MA based scaffolds for regenerative medicine, including detailed strategies for the engineering methods and materials used. Finally, we summarize the current research progress and future directions of Sil-MA in regenerative medicine. This review not only delineates the representative design strategies and their application in regenerative medicine, but also provides new direction in the fabrication of biomaterial constructs for the clinical translation in order to stimulate the future development of implants.

Preparation of bacterial cellulose-based antibacterial membranes with prolonged release of drugs: Emphasis on the chemical structure of drugs

Bacterial cellulose (BC) based antibacterial membranes were synthesized, including BC-cefoperazone (BC-CEF) and BC-cefoperazone sodium (BC-CEF/Na). To examine the various drug loading processes, the structure, morphology, and physical-chemical characteristics of membranes were evaluated. Results demonstrated that both types of medicines were successfully absorbed into membranes, and membranes displayed identical morphology and FT-IR peaks. BC-CEF showed lower crystalline of XRD, which was likely caused by the combination of carboxyl and hydroxyl. However, there were no drug peaks seen in the membranes, indicating no alteration of ribbon crystallization of BC. Two types of antibacterial membranes have significantly distinct drug-loading traits and drug-releasing profiles. The drug loading rate of CEF (46.4 mg/g) was significantly greater than CEF/Na (30.3 mg/g). The cumulative drug-releasing profiles showed that only BC-CEF continues to release drugs for a lengthy period up to 48 h and exhibited good antimicrobial activity against S. aureus and E. coli until 48 h. The cytotoxicity assay demonstrated the great biocompatibility of all membranes. Findings indicated that BC-CEF has the potential use as a prolonged biocide in the biomedical. The idea that BC membranes can naturally incorporate the carboxyl groups from antibiotics is also innovative and can be useful in developing of drug delivery systems.

Bioglass 45S5, a relevant alternative to autogenous harvesting for secondary alveolar bone grafts in clefts? Retrospective study of one hundred surgeries

The secondary alveolar bone grafting (SABG) step restores the continuity of the alveolar bone necessary for dentition. Faced with the complications of autografts, synthetic biomaterials such as Bioglass (BG) 45S5 have been proposed. The objective was to evaluate the success rate of SABG with the addition of BG 45S5 and to highlight the prognostic factors. Patients who underwent operation between 2015 and 2021 and had follow-up cone-beam computed tomography (CBCT) were analyzed. Multivariate analysis was performed to determine factors influencing radiographic success. A total of 102 SABG were analyzed. They were unilateral total cleft lip and palate (49, 48.0%). The mean age at surgery was 9.32 ± 3.09 years. Surgeries were performed mainly outside a syndromic context and without a family history after orthodontic preparation. The radiographic success rate at 1 year was 80.4%. Mixed dentition stage (odds ratio [OR] = 7.3, p = 0.024), absence of syndromic context (OR = 20.7, p = 0.024) and female sex (OR = 4.88, p = 0.021) were factors predictive of surgical success. The use of BG 45S5 instead of autograft is relevant for SABG, with a 1-year success rate of over 80%. The stage of mixed dentition, the absence of syndromic context, and female sex were factors for good prognosis.

Oncologic outcomes with and without amniotic membranes in robotic-assisted radical prostatectomy: A propensity score matched analysis

Objective

Placement of human placenta derived grafts during robotic-assisted radical prostatectomy (RARP) hastens the return of continence and potency. The long-term impact on the oncologic outcomes remains to be investigated. Our objective was to determine the oncologic outcomes of patients with dehydrated human amnion chorion membrane (dHACM) at RARP compared to a matched cohort.

Methods

In a referral centre, from August 2013 to October 2019, 599 patients used dHACM in bilateral nerve-sparing RARP. We excluded patients with less than 12 months follow-up, simple prostatectomy, and unilateral nerve-sparing. Patients with dHACM (amnio group) were 529, and were propensity score matched 1:1 to 2465 patients without dHACM (non-amnio group) and a minimum follow-up of 36 months. At the time of RARP, dHACM was placed around the neurovascular bundle in the amnio group. Continuous and categorical variables in matched groups was tested by two-sample Kolmogorov-Smirnov test and Fisher's exact test respectively. Outcomes measured were biochemical recurrence (BCR), adjuvant and salvage therapy rates.

Results

Propensity score matching resulted in two groups of 444 patients. Cumulative incidence functions for BCR did not show a difference between the groups (p=0.3). Patients in the non-amnio group required salvage therapy more frequently than the amnio group, particularly after partial nerve-sparing RARP (6.3% vs. 2.3%, p=0.001). Limitations are the absence of prospective randomization.

Conclusion

The data suggest that using dHACM does not have a negative impact on BCR in patients. Outcomes of cancer specific and overall survival will require follow-up study to increase our understanding of these grafts' impact on prostate cancer biology.

Stem Cell-Based Tissue Engineering Approaches for Diabetic Foot Ulcer: a Review from Mechanism to Clinical Trial

Diabetic foot ulcer (DFU) is a complication from incomplete or prolonged wound healing, at times requires amputation, putting substantial health and socioeconomic burden. Wound healing is a dynamic overlapping process that can be regulated by arrays of molecular factors showing redundancy in function. However, dysregulation in the mechanism of angiogenesis, extra cellular matrix (ECM) formation and immune modulation are the major causes for impair wound healing in hyperglycaemic patients. Despite development of wound care research, there is a lack of well-accepted targeted therapy with multidisciplinary approach for DFU treatment. Stem cell therapy holds a promising outcome both in preclinical and clinical trials because of its ability to promote healing via regeneration and specialized tissue differentiation. Among different types of stem cells, regenerative potential of mesenchymal stem cell (MSC) is well demonstrated in both experimental and clinical trial. Still there is a huge knowledge gap among medical practitioners for deciding the best stem cell source, administration route, and safety. This review strengthens the fact that why stem cell therapy is a promising candidate to treat DFU and cited multiple tissue engineering and biomaterial-based approaches for delivering stem cells and their aftermath paracrine events. Based on the pre-clinical and clinical studies, the review tried to come up with optimum stem cell source and delivery route for the treatment of DFU. At last, the review glances on possible direction to enhance therapeutics strategy for the same, including different approaches like: phytocompounds, exosomes, scaffold geometry, cell preconditioning and licensing etc.

Mechanosignaling-related angiocrine factors drive osteoblastic phenotype in response to zirconia

BACKGROUND

The growing use of zirconia as a ceramic material in dentistry is attributed to its biocompatibility, mechanical properties, esthetic appearance, and reduced bacterial adhesion. These favorable properties make ceramic materials a viable alternative to commonly used titanium alloys. Mimicking the physiological properties of blood flow, particularly the mechanosignaling in endothelial cells (ECs), is crucial for enhancing our understanding of their role in the response to zirconia exposure.

METHODS

In this study, EC cultures were subjected to shear stress while being exposed to zirconia for up to 3 days. The conditioned medium obtained from these cultures was then used to expose osteoblasts for a duration of 7 days. To investigate the effects of zirconia on osteoblasts, we examined the expression of genes associated with osteoblast differentiation, including Runx2, Osterix, bone sialoprotein, and osteocalcin genes. Additionally, we assessed the impact of mechanosignaling-related angiocrine factors on extracellular matrix (ECM) remodeling by measuring the activities of matrix metalloproteinases 2 and 9 (MMP2 and MMP9) during the acquisition of the osteogenic phenotype, which precedes mineralization.

RESULTS

Our data revealed that mechanosignaling-related angiocrine factors play a crucial role in promoting an osteoblastic phenotype in response to zirconia exposure. Specifically, exposed osteoblasts exhibited significantly higher expression levels of genes associated with osteoblast differentiation, such as Runx2, Osterix, bone sialoprotein, and osteocalcin genes. Furthermore, the activities of MMP2 and MMP9, which are involved in ECM remodeling, were modulated by mechanosignaling-related angiocrine factors. This modulation is likely an initial event preceding the mineralization phase.

CONCLUSION

Based on our findings, we propose that mechanosignaling drives the release of angiocrine factors capable of modulating the osteogenic phenotype at the biointerface with zirconia. This process creates a microenvironment that promotes wound healing and osseointegration. Moreover, these results highlight the importance of considering the mechanosignaling of endothelial cells in the modulation of bone healing and osseointegration in the context of blood vessel effects. Our data provide new insights and open avenues for further investigation into the influence of mechanosignaling on bone healing and the osseointegration of dental devices.

Advancements in gelatin-based hydrogel systems for biomedical applications: A state-of-the-art review

A gelatin-based hydrogel system is a stimulus-responsive, biocompatible, and biodegradable polymeric system with solid-like rheology that entangles moisture in its porous network that gradually protrudes to assemble a hierarchical crosslinked arrangement. The hydrolysis of collagen directs gelatin construction, which retains arginyl glycyl aspartic acid and matrix metalloproteinase-sensitive degeneration sites, further confining access to chemicals entangled within the gel (e.g., cell encapsulation), modulating the release of encapsulated payloads and providing mechanical signals to the adjoining cells. The utilization of various types of functional tunable biopolymers as scaffold materials in hydrogels has become highly attractive due to their higher porosity and mechanical ability; thus, higher loading of proteins, peptides, therapeutic molecules, etc., can be further modulated. Furthermore, a stimulus-mediated gelatin-based hydrogel with an impaired concentration of gellan demonstrated great shear thinning and self-recovering characteristics in biomedical and tissue engineering applications. Therefore, this contemporary review presents a concise version of the gelatin-based hydrogel as a conceivable biomaterial for various biomedical applications. In addition, the article has recapped the multiple sources of gelatin and their structural characteristics concerning stimulating hydrogel development and delivery approaches of therapeutic molecules (e.g., proteins, peptides, genes, drugs, etc.), existing challenges, and overcoming designs, particularly from drug delivery perspectives.

Agarose fibers with glycerol and graphene oxide and functional properties for potential application in biomaterials

Agarose has numerous applications in biochemistry and medical textiles. This study aimed to produce agarose-graphene oxide-glycerol fibers and analyze their properties. The agarose gel was prepared by dissolving the polymer in 9:1 (v/v) dimethyl sulfoxide (DMSO): H2O, followed by spinning in an ethanol bath (1:1 (v/v) ethanol: H2O) at 20 °C. Fibers were obtained using 8 % (m/v) agarose, 2 % (m/v) glycerol, and 0.5 % and 1 % (m/v) graphene oxide (GO). The fibers had a titer of 18.32-32.49 tex and, a tenacity of 1.40-3.35 cN/tex. GO increased the thermal resistance by 79 %. The presence of glycerol and GO was confirmed and analyzed by FTIR and XPS. Fiber water absorption was decreased by 30 % with the GO addition. The weight loss increased by 55 % after glycerol addition, 51 % with GO addition, and 36 % with glycerol and GO simultaneous addition. Furthermore, GO exhibited 100 % inhibition for both S. aureus (gram-positive) and E. coli bacteria (gram-negative). Fiber F1, with only agarose, inhibited S. aureus by 34.93 %, F2 with 2 % glycerol by 48.72 %, F3 with 0.5 % GO by 63.42 %, and F4 with 2 % glycerol and 0.5 % GO by 30.65 %. However, the inhibition increased to 49.43 % with 1 % GO. The agarose fibers showed low inhibition for E. coli, ranging from 3.35 to 12.12 %.

3D printed scaffolds based on hyaluronic acid bioinks for tissue engineering: a review

Hyaluronic acid (HA) is widely distributed in human connective tissue, and its unique biological and physicochemical properties and ability to facilitate biological structure repair make it a promising candidate for three-dimensional (3D) bioprinting in the field of tissue regeneration and biomedical engineering. Moreover, HA is an ideal raw material for bioinks in tissue engineering because of its histocompatibility, non-immunogenicity, biodegradability, anti-inflammatory properties, anti-angiogenic properties, and modifiability. Tissue engineering is a multidisciplinary field focusing on in vitro reconstructions of mammalian tissues, such as cartilage tissue engineering, neural tissue engineering, skin tissue engineering, and other areas that require further clinical applications. In this review, we first describe the modification methods, cross-linking methods, and bioprinting strategies for HA and its derivatives as bioinks and then critically discuss the strengths, shortcomings, and feasibility of each method. Subsequently, we reviewed the practical clinical applications and outcomes of HA bioink in 3D bioprinting. Finally, we describe the challenges and opportunities in the development of HA bioink to provide further research references and insights.

Recent advances of exosomes in soft tissue injuries in sports medicine: A critical review on biological and biomaterial applications

Sports medicine is generally associated with soft tissue injuries including muscle injuries, meniscus and ligament injuries, tendon ruptures, tendinopathy, rotator cuff tears, and tendon-bone healing during injuries. Tendon and ligament injuries are the most common sport injuries accounting for 30-40% of all injuries. Therapies for tendon injuries can be divided into surgical and non-surgical methods. Surgical methods mainly depend on the operative procedures, the surgeons and postoperative interventions. In non-surgical methods, cell therapy with stem cells and cell-free therapy with secretome of stem cell origin are current directions. Exosomes are the main paracrine factors of mesenchymal stem cells (MSCs) containing biological components such as proteins, nucleic acids and lipids. Compared with MSCs, MSC-exosomes (MSC-exos) possess the capacity to escape phagocytosis and achieve long-term circulation. In addition, the functions of exosomes from various cell sources in soft tissue injuries in sports medicine have been gradually revealed in recent years. Along with the biological and biomaterial advances in exosomes, exosomes can be designed as drug carriers with biomaterials and exosome research is providing promising contributions in cell biology. Exosomes with biomaterial have the potential of becoming one of the novel therapeutic modalities in regenerative researches. This review summarizes the derives of exosomes in soft tissue regeneration and focuses on the biological and biomaterial mechanism and advances in exosomal therapy in soft tissue injuries.

Tailoring biomaterials for monitoring and evoking tertiary lymphoid structures

Despite the remarkable clinical success of immune checkpoint blockade (ICB) in the treatment of cancer, the response rate to ICB therapy remains suboptimal. Recent studies have strongly demonstrated that intratumoral tertiary lymphoid structures (TLSs) are associated with a good prognosis and a successful clinical response to immunotherapy. However, there is still a shortage of efficient and wieldy approaches to image and induce intratumoral TLSs in vivo. Biomaterials have made great strides in overcoming the deficiencies of conventional diagnosis and therapies for cancer, and antitumor therapy has also benefited from biomaterial-based drug delivery models. In this review, we summarize the reported methods for TLS imaging and induction based on biomaterials and provide potential strategies that can further enhance the effectiveness of imaging and stimulating intratumoral TLSs to predict and promote the response rates of ICB therapies for patients. STATEMENT OF SIGNIFICANCE: In this review, we focused on the promising of biomaterials for imaging and induction of TLSs. We reviewed the applications of biomaterials in molecular imaging and immunotherapy, identified the biomaterials that may be suitable for TLS imaging and induction, and provided outlooks for further research. Accurate imaging and effective induction of TLSs are of great significance for understanding the mechanism and clinical application. We highlighted the need for multidisciplinary coordination and cooperation in this field, and proposed the possible future direction of noninvasive imaging and artificial induction of TLSs based on biomaterials. We believe that it can facilitate collaboration and galvanize a broader effort.

An injectable signal-amplifying device elicits a specific immune response against malignant glioblastoma

Despite exciting achievements with some malignancies, immunotherapy for hypoimmunogenic cancers, especially glioblastoma (GBM), remains a formidable clinical challenge. Poor immunogenicity and deficient immune infiltrates are two major limitations to an effective cancer-specific immune response. Herein, we propose that an injectable signal-amplifying nanocomposite/hydrogel system consisting of granulocyte-macrophage colony-stimulating factor and imiquimod-loaded antigen-capturing nanoparticles can simultaneously amplify the chemotactic signal of antigen-presenting cells and the "danger" signal of GBM. We demonstrated the feasibility of this strategy in two scenarios of GBM. In the first scenario, we showed that this simultaneous amplification system, in conjunction with local chemotherapy, enhanced both the immunogenicity and immune infiltrates in a recurrent GBM model; thus, ultimately making a cold GBM hot and suppressing postoperative relapse. Encouraged by excellent efficacy, we further exploited this signal-amplifying system to improve the efficiency of vaccine lysate in the treatment of refractory multiple GBM, a disease with limited clinical treatment options. In general, this biomaterial-based immune signal amplification system represents a unique approach to restore GBM-specific immunity and may provide a beneficial preliminary treatment for other clinically refractory malignancies.

Recent advancement in vascularized tissue-engineered bone based on materials design and modification

Bone is one of the most vascular network-rich tissues in the body and the vascular system is essential for the development, homeostasis, and regeneration of bone. When segmental irreversible damage occurs to the bone, restoring its vascular system by means other than autogenous bone grafts with vascular pedicles is a therapeutic challenge. By pre-generating the vascular network of the scaffold in vivo or in vitro, the pre-vascularization technique enables an abundant blood supply in the scaffold after implantation. However, pre-vascularization techniques are time-consuming, and in vivo pre-vascularization techniques can be damaging to the body. Critical bone deficiencies may be filled quickly with immediate implantation of a supporting bone tissue engineered scaffold. However, bone tissue engineered scaffolds generally lack vascularization, which requires modification of the scaffold to aid in enhancing internal vascularization. In this review, we summarize the relationship between the vascular system and osteogenesis and use it as a basis to further discuss surgical and cytotechnology-based pre-vascularization strategies and to describe the preparation of vascularized bone tissue engineered scaffolds that can be implanted immediately. We anticipate that this study will serve as inspiration for future vascularized bone tissue engineered scaffold construction and will aid in the achievement of clinical vascularized bone.

Developing a Novel Platelet-Rich Plasma-Laden Bioadhesive Hydrogel Contact Lens for the Treatment of Ocular Surface Chemical Injuries

Permanent injury to corneal limbal stem cells after ocular surface chemical and thermal injuries is a major cause of corneal blindness. In this study, a PRP-laden GelMA hydrogel contact lens is manufactured which is aimed to support the limbal niche after ocular surface insults thereby preventing limbal stem cell failure. GelMA with varying platelet-rich plasma (PRP) concentrations (5%, 10%, and 20%) is photopolymerized using a visible light crosslinking system followed by characterizations of mechanical properties, growth factor release, enzymatic degradation, and in vitro cytotoxicity. The addition of 10% PRP into 10% GelMA hydrogel precursor solution results in the highest tensile and compressive modulus (38 and 110 kPa, respectively) and burst pressure (251±37.66 mmHg). Degradation time varies according to the concentration of the collagenase enzyme tested (0, 2.5, 5, and 40 µg/mL) and is most prolonged with 20% PRP. EGF and TGF-β release profiles suggest an initial burst release followed by sustained release, most consistent in the 10% PRP sample. Although cell viability decreases on day 1, rapid recovery is observed and is approximately 120% after day 21. PRP-laden GelMA in the form of a contact lens may be a promising biomaterial-based treatment approach for the maintenance of limbal epithelial stem cells after ocular surface insults.

The construction of elastin-like polypeptides and their applications in drug delivery system and tissue repair

Elastin-like polypeptides (ELPs) are thermally responsive biopolymers derived from natural elastin. These peptides have a low critical solution temperature phase behavior and can be used to prepare stimuli-responsive biomaterials. Through genetic engineering, biomaterials prepared from ELPs can have unique and customizable properties. By adjusting the amino acid sequence and length of ELPs, nanostructures, such as micelles and nanofibers, can be formed. Correspondingly, ELPs have been used for improving the stability and prolonging drug-release time. Furthermore, ELPs have widespread use in tissue repair due to their biocompatibility and biodegradability. Here, this review summarizes the basic property composition of ELPs and the methods for modulating their phase transition properties, discusses the application of drug delivery system and tissue repair and clarifies the current challenges and future directions of ELPs in applications.

An overview of polyurethane biomaterials and their use in drug delivery

Polyurethanes are a versatile and highly tunable class of materials that possess unique properties including high tensile strength, abrasion and fatigue resistance, and flexibility at low temperatures. The tunability of polyurethane properties has allowed this class of polymers to become ubiquitous in our daily lives in fields as diverse as apparel, appliances, construction, and the automotive industry. Additionally, polyurethanes with excellent biocompatibility and hemocompatibility can be synthesized, enabling their use as biomaterials in the medical field. The tunable nature of polyurethane biomaterials also makes them excellent candidates as drug delivery vehicles, which is the focus of this review. The fundamental idea we aim to highlight in this article is the structure-property-function relationships found in polyurethane systems. Specifically, the chemical structure of the polymer determines its macroscopic properties and dictates the functions for which it will perform well. By exploring the structure-property-function relationships for polyurethanes, we aim to elucidate the fundamental properties that can be tailored to achieve controlled drug release and empower researchers to design new polyurethane systems for future drug delivery applications.

Evaluation of a temperature-responsive magnetotocosome as a magnetic targeting drug delivery system for sorafenib tosylate anticancer drug

In this investigation, a polymeric fusion of chitosan (CS) and thermosensitive poly (N-isopropyl acrylamide) - PNIPAAm - encapsulated a magnetotocosome, biocompatible nanocarrier. This encapsulation strategy demonstrated improved drug entrapment efficiency, achieving up to 98.8 %. Additionally, it exhibited extended stability, optimal particle dimensions, and the potential for industrial scaling, thus facilitating controlled drug delivery of sorafenib tosylate to cancerous tissue. Reversible Addition-Fragmentation Chain Transfer (RAFT) techniques were employed to synthesize PNIPAAm. The effects of polymer molecular weight and polydispersity index on the lower critical solution temperature (LCST) were evaluated. The resulting polymeric amalgamation, involving the thermosensitive PNIPAAm synthesized using RAFT techniques and CS that coated the magnetotocosome (CS-Raft PNIPAAm-magnetotocosome) with an LCST approximately at 45 °C, holds the potential to enhance drug bioavailability and enable applications in hyperthermia treatment, controlled release, and targeted drug delivery.

Development of ibuprofen-loaded electrospun materials suitable for surgical implantation in peripheral nerve injury

The development of nerve wraps for use in the repair of peripheral nerves has shown promise over recent years. A pharmacological effect to improve regeneration may be achieved by loading such materials with therapeutic agents, for example ibuprofen, a non-steroidal anti-inflammatory drug with neuroregenerative properties. In this study, four commercially available polymers (polylactic acid (PLA), polycaprolactone (PCL) and two co-polymers containing different ratios of PLA to PCL) were used to fabricate ibuprofen-loaded nerve wraps using blend electrospinning. In vitro surgical handling experiments identified a formulation containing a PLA/PCL 70/30 molar ratio co-polymer as the most suitable for in vivo implantation. In a rat model, ibuprofen released from electrospun materials significantly improved the rate of axonal growth and sensory recovery over a 21-day recovery period following a sciatic nerve crush. Furthermore, RT-qPCR analysis of nerve segments revealed that the anti-inflammatory and neurotrophic effects of ibuprofen may still be observed 21 days after implantation. This suggests that the formulation developed in this work could have potential to improve nerve regeneration in vivo.

Nanocellulose-based porous materials: Regulation and pathway to commercialization in regenerative medicine

We review the recent progress that have led to the development of porous materials based on cellulose nanostructures found in plants and other resources. In light of the properties that emerge from the chemistry, shape and structural control, we discuss some of the most promising uses of a plant-based material, nanocellulose, in regenerative medicine. Following a brief discussion about the fundamental aspects of self-assembly of nanocellulose precursors, we review the key strategies needed for material synthesis and to adjust the architecture of the materials (using three-dimensional printing, freeze-casted porous materials, and electrospinning) according to their uses in tissue engineering, artificial organs, controlled drug delivery and wound healing systems, among others. For this purpose, we map the structure-property-function relationships of nanocellulose-based porous materials and examine the course of actions that are required to translate innovation from the laboratory to industry. Such efforts require attention to regulatory aspects and market pull. Finally, the key challenges and opportunities in this nascent field are critically reviewed.