Re-dispersible Anisotropic and Structured Nanoparticles: Formation and Their Subsequent Shape Change

Marrying the incompatible for better: Incorporation of hydrophobic payloads in superhydrophilic hydrogels

HYPOTHESIS

The entrapment of lyophobic in superhydrophilic hydrogels is challenging because of the intrinsic incompatibility between hydrophobic and hydrophilic molecules. To achieve such entrapment without affecting the hydrogel's formation, the electrospinning of nanodroplets or nanoparticles with a water-soluble polymer could reduce the incompatibility through the reduction of interfacial tension and the formation of a barrier film preventing coalescence or aggregation.

EXPERIMENTS

Nanodroplets or nanoparticles dispersion are electrospun in the presence of a hydrophilic polymer in hydrogel precursors. The dissolution of the hydrophilic nanofibers during electrospinning allows a redispersion of emulsion droplets and nanoparticles in the hydrogel's matrix.

FINDINGS

Superhydrophilic hydrogels with well-distributed hydrophobic nanodroplets or nanoparticles are obtained without detrimentally imparting the viscosity of hydrogel's precursors and the mechanical properties of the hydrogels. Compared with the incorporation of droplets without electrospinning, higher loadings of hydrophobic payload are achieved without premature leakage. This concept can be used to entrap hydrophobic agrochemicals, drugs, or antibacterial agents in simple hydrogels formulation.

Hipster microcarriers: exploring geometrical and topographical cues of non-spherical microcarriers in biomedical applications

Structure and organisation are key aspects of the native tissue environment, which ultimately condition cell fate via a myriad of processes, including the activation of mechanotransduction pathways. By modulating the formation of integrin-mediated adhesions and consequently impacting cell contractility, engineered geometrical and topographical cues may be introduced to activate downstream signalling and ultimately control cell morphology, proliferation, and differentiation. Microcarriers appear as attractive vehicles for cell-based tissue engineering strategies aiming to modulate this 3D environment, but also as vehicles for cell-free applications, given the ease in tuning their chemical and physical properties. In this review, geometry and topography are highlighted as two preponderant features in actively regulating interactions between cells and the extracellular matrix. While most studies focus on the 2D environment, we focus on how the incorporation of these strategies in 3D systems could be beneficial. The techniques applied to design 3D microcarriers with unique geometries and surface topographical cues are covered, as well as specific tissue engineering approaches employing these microcarriers. In fact, successfully achieving a functional histoarchitecture may depend on a combination of fine-tuned geometrically shaped microcarriers presenting intricately tailored topographical cues. Lastly, we pinpoint microcarrier geometry as a key player in cell-free biomaterial-based strategies, and its impact on drug release kinetics, the production of steerable microcarriers to target tumour cells, and as protein or antibody biosensors.

Bowl-Shaped Polydopamine Nanocapsules: Control of Morphology via Template-Free Synthesis

Synthesis of hollow polydopamine bowl-shaped nanoparticles (nanobowls), as small as 80 nm in diameter, via a one-pot template-free rapid method is reported. Addition of dopamine to a solution of 0.606 mg/mL tris(hydroxymethyl)aminomethane in an ethanol/water mixed solvent resulted in the formation of hollow spherical nanocapsules within 2 h. At longer reaction times, the formation of conventional solid nanospheres dominated the reaction. The wall thickness of the nanocapsules increased with increasing dopamine concentration in the reaction medium. Wall thickness was also influenced by oxygen availability during the reaction. Nanocapsules with thin walls were prone to collapse. When dried, over 90% of the nanocapsules with wall thickness on the order of 11 nm collapsed. Also, the degree of collapse of individual nanoparticles changed from complete to partial to no collapse as the wall thickness was increased. Varying the ethanol content affected the cavity size and overall dimension of the nanocapsules produced but did not result in a significant change to the wall thickness. A mechanism describing the formation of the nanocapsules and their subsequent collapse into nanobowls is presented. The shape-tunable nanobowls prepared through this green, rapid, and affordable method are expected to have applications in the biomedical, electrochemical, and catalytic fields.

Breaking Nano-Spaghetti: Bending and Fracture Tests of Nanofibers

Nanofibers composed of silica nanoparticles, used as structural building blocks, and polystyrene nanoparticles introduced as sacrificial material are fabricated by bicolloidal electrospinning. During fiber calcination, sacrificial particles are combusted leaving voids with controlled average sizes. The mechanical properties of the sintered silica fibers with voids are investigated by suspending the nanofiber over a gap and performing three-point bending experiments with atomic force microscopy. We investigate three different cases: fibers without voids and with 60 or 260 nm voids. For each case, we study how the introduction of the voids can be used to control the mechanical stiffness and fracture properties of the fibers. Fibers with no voids break in their majority at a single fracture point (70% of cases), segmenting the fiber into two pieces, while the remaining cases (30%) fracture at multiple points, leaving a gap in the suspended fiber. On the other hand, fibers with 60 nm voids fracture in only 25% of the cases at a single point, breaking predominantly at multiple points (75%). Finally, fibers with 260 nm voids fracture roughly in equal proportions leaving two and multiple pieces (46% vs 54%, respectively). The present study is a prerequisite for processes involving the controlled sectioning of nanofibers to yield anisometric particles.

Preparation of ellipsoid-shaped supraparticles with modular compositions and investigation of shape-dependent cell-uptake

Hybrid ellipsoid-shaped supraparticles consisting of different nanomaterials are fabricated and the influence of the supraparticle shape on cell-uptake is investigated.

Colloidal polymers with controlled sequence and branching constructed from magnetic field assembled nanoparticles

The assembly of nanoparticles into polymer-like architectures is challenging and usually requires highly defined colloidal building blocks. Here, we show that the broad size-distribution of a simple dispersion of magnetic nanocolloids can be exploited to obtain various polymer-like architectures. The particles are assembled under an external magnetic field and permanently linked by thermal sintering. The remarkable variety of polymer-analogue architectures that arises from this simple process ranges from statistical and block copolymer-like sequencing to branched chains and networks. This library of architectures can be realized by controlling the sequencing of the particles and the junction points via a size-dependent self-assembly of the single building blocks.

How shape influences uptake: interactions of anisotropic polymer nanoparticles and human mesenchymal stem cells

Among several nanoparticle properties, shape is important for their interaction with cells and, therefore, relevant for uptake studies and applications. In order to further investigate such characteristics, fluorescently labeled spherical polymer nanoparticles are synthesized by free-radical polymerization via the miniemulsion process. The spherical nanoparticles are subsequently submitted to controlled mechanical deformation to yield quasi-ellipsoidal polymeric nanoparticles with different aspect ratios. The uptake behaviors of spherical and non-spherical particles with equal volume are investigated qualitatively and quantitatively by electron microscopy, confocal laser scanning microscopy, and flow cytometry measurements. Non-spherical particles show fewer uptake by cells than their spherical counterparts with a negative correlation between aspect ratio and uptake rate. This is attributed to the larger average curvature radius of adsorbed non-spherical particles experienced by the cells.

Fabrication of Polymer Ellipsoids by the Electrospinning of Swollen Nanoparticles

Electrospinning is used to deform originally spherical polymer nanoparticles into ellipsoidal nanoparticles. The polymer nanoparticles are swollen and the dispersion is then electrospun. Under certain conditions, the stretching generated in the electrospinning jet is enough to generate elongated nanoparticles embedded in fibers. The formation of the anisotropic particles is observed by stimulated emission depletion (STED) microscopy performed on fluorescent nanoparticles and by electron microscopy measurements on the nanoparticles recovered after removal of the fiber matrix.