Benzothiadiazole-Containing Conjugated Polyelectrolytes for Biological Sensing and Imaging

Effects of donor and acceptor substituents on the photophysics of 4-ethynyl-2,1,3-benzothiadiazole derivatives

The present work explores the photophysical, electrochemical, and fluorescence polarization properties of a group of π-conjugated phenylethynyl-2,1,3-benzothiadiazole derivatives (BTDs) bearing different electron-donating (ED) or electron-withdrawing (EW) substituents at the para position of the phenylethynyl moiety. The BTDs were synthesized through the Sonogashira cross-coupling reaction between 4-bromo-2,1,3-benzothiadiazole and the respective para-substituted phenylethynyl derivatives. The BTDs with the EW-substituents show relatively weak solvatochromic behavior, while the BTDs with the strong ED-substituents like methoxy and N,N-dimethylamino-based substituents (BTDPhOMe and BTDPhNMe2) exhibit a pronounced solvatochromic behavior. The change in dipole moments in the excited states of the derivatives was calculated using Lippert-Mataga plots. The conclusions drawn on the spectral behavior of the molecules could be rationalized by TD-DFT calculations involving electron density difference (EDD) maps that correlate with the ICT characteristics of the molecules. The experimental and theoretical calculations reveal that the BTDs with the strong ED-substituents (strong push-pull type BTDs) have a strong ICT character in the excited state. These strong push-pull type BTDs show high fluorescence quantum yield (ΦF) in apolar solvents and low ΦF in polar solvents. In contrast, the BTDs with the weak ED-substituents (weak push-pull type BTDs) and EW-substituents (pull-pull type BTDs) have a weaker ICT character with low ΦF in apolar and high ΦF in polar solvent media. There is good a agreement among the HOMO-LUMO band gaps obtained from absorption spectroscopy and electrochemical studies and theoretical calculations. The fluorescence anisotropy measurement in the glycerol medium shows that the studied BTDs generally exhibit higher sensitivity towards microviscosity than the traditional DPH fluorescence anisotropy probe.

Fluorescent Benzothiadiazole Derivatives as Fluorescence Imaging Dyes: A Decade of New Generation Probes

The current review describes advances in the use of fluorescent 2,1,3-benzothiadiazole (BTD) derivatives after nearly one decade since the first description of bioimaging experiments using this class of fluorogenic dyes. The review describes the use of BTD-containing fluorophores applied as, inter alia, bioprobes for imaging cell nuclei, mitochondria, lipid droplets, sensors, markers for proteins and related events, biological processes and activities, lysosomes, plasma membranes, multicellular models, and animals. A number of physicochemical and photophysical properties commonly observed for BTD fluorogenic structures are also described.

New Organic Materials Based on Multitask 2H-benzo[d]1,2,3-triazole Moiety

Multifunctionality is a desirable aspect in materials science. Indeed, the development of multifunctional compounds is crucial for sustainable chemistry by saving resources and time. In this sense, 2H-benzo[d]1,2,3-triazole (BTz) is an excellent candidate with promising characteristics, including its ability to self-assemble; its acceptor character, which enables the synthesis of donor-acceptor structures; and its facile modulation using standard chemical methods. Thus, due to its interesting properties, it is possible to produce different derivatives with applications in different fields, as summarized in this article, with the correct substitution at the BTz cores. Optoelectronic or biomedical applications, amongst others, are highlighted.

Copper-based ionic liquid-catalyzed click polymerization of diazides and diynes toward functional polytriazoles for sensing applications

An efficient copper-based ionic liquid-catalyzed azide–alkyne click polymerization was developed, and functional polytriazoles were produced which could be used as sensors.

Polyfluorene-Based Multicolor Fluorescent Nanoparticles Activated by Temperature for Bioimaging and Drug Delivery

Multifunctional nanoparticles have been attracting growing attention in recent years because of their capability to integrate materials with different features in one entity, which leads them to be considered as the next generation of nanomedicine. In this work, we have taken advantage of the interesting properties of conjugated polyelectrolytes to develop multicolor fluorescent nanoparticles with integrating imaging and therapeutic functionalities. With this end, thermosensitive liposomes were coated with three recently synthesized polyfluorenes: copoly-((9,9-bis(6'-N,N,N-trimethylammonium)hexyl)-2,7-(fluorene)-alt-1,4-(phenylene)) bromide (HTMA-PFP), copoly-((9,9-bis(6'-N,N,N-trimethylammonium)hexyl)-2,7-(fluorene)-alt-4,7-(2- (phenyl)benzo(d) (1,2,3) triazole)) bromide (HTMA-PFBT) and copoly-((9,9-bis(6'-N,N,N- trimethylammonium)hexyl)-2,7-(fluorene)-alt-1,4-(naphtho(2,3c)-1,2,5-thiadiazole)) bromide (HTMA-PFNT), in order to obtain blue, green and red fluorescent drug carriers, respectively. The stability, size and morphology of the nanoparticles, as well as their thermotropic behavior and photophysical properties, have been characterized by Dynamic Light Scattering (DLS), Zeta Potential, transmission electron microscope (TEM) analysis and fluorescence spectroscopy. In addition, the suitability of the nanostructures to carry and release their contents when triggered by hyperthermia has been explored by using carboxyfluorescein as a hydrophilic drug model. Finally, preliminary experiments with mammalian cells demonstrate the capability of the nanoparticles to mark and visualize cells with different colors, evidencing their potential use for imaging and therapeutic applications.

Synthesis and Characterization of a Novel Green Cationic Polyfluorene and Its Potential Use as a Fluorescent Membrane Probe

In the present work, we have synthesized a novel green-emitter conjugated polyelectrolyte Copoly-{[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]-2,7-(fluorene)-alt-4,7-(2-(phenyl) benzo[d] [1,2,3] triazole)} bromide (HTMA-PFBT) by microwave-assisted Suzuki coupling reaction. Its fluorescent properties have been studied in aqueous media and in presence of model membranes of different composition, in order to explore its ability to be used as a green fluorescent membrane probe. The polyelectrolyte was bound with high affinity to the membrane surface, where it exhibited high fluorescence efficiency and stability. HTMA-PFBT showed lower affinity to zwitterionic membranes as compared to anionic ones, as well as a more external location, near the membrane-aqueous interface. Fluorescence microscopy studies confirmed the interaction of HTMA-PFBT with the model membranes, labelling the lipid bilayer without perturbing its morphology and showing a clear preference towards anionic systems. In addition, the polyelectrolyte was able to label the membrane of bacteria and living mammalian cells, separately. Finally, we explored if the polyelectrolyte can function also as a sensitive probe able of detecting lipid-phase transitions. All these results suggest the potential use of HTMA-PFBT as a green membrane marker for bioimaging and selective recognition of bacteria cell over mammalian ones and as a tool to monitor changes in physical state of lipid membranes.

A new water-soluble polythiophene derivative as a probe for real-time monitoring adenosine 5'-triphosphatase activity in lysosome of living cells

Detection of the adenosine 5'-triphosphatase (ATPase) activity in lysosome of living cells is of great importance for clinical diagnosis of many related diseases, including cancer. In this work, a new water-soluble polythiophene derivative named ZnPT bearing both quaternary ammonium salt groups and dipicolylamine-Zn²⁺ (DPA-Zn²⁺) complexes in its side chain, was designed and synthesized for this propose. The probe mainly localized to lysosome with good biocompatibility and membrane penetration. The real-time, continuous, direct, and label-free assays were achieved through a fluorescence "turn-on" mode by taking advantages of the reaction specificity of ATPase with ATP and the high binding selectivity of ZnPT toward ATP substrate over its hydrolysis product (ADP). This well designed strategy should provide a facile and effective way for investigating ATPase-relevant biological processes.

Synthesis of Salts of 1,2,5,6- and 1,4,5,8-Naphthalenetetramine

1,2,5,6-Naphthalenetetramine (1a), its 1,4,5,8-isomer (2a), and their salts are valuable precursors for synthesizing nitrogen-containing arenes and other targets of interest. We describe how salts of tetramines 1a and 2a can be made from simple protected derivatives of 1,5-naphthalenediamine (2d) by sequences of regioselective dinitration, deprotection, and reduction. Various shortcomings of previously reported syntheses of tetramines 1a and 2a can thereby be avoided. In addition, we report structural studies that may help clarify the mechanism of nitration and resolve an earlier controversy about the regioselectivity observed in nitrations of derivatives of 1,5-naphthalenediamine (2d).

A Conjugated Polyelectrolyte with Pendant High Dense Short-Alkyl-Chain-Bridged Cationic Ions: Analyte-Induced Light-Up and Label-Free Fluorescent Sensing of Tumor Markers

A novel cationic water-soluble conjugated polyelectrolyte (CPE) of polyfluorene that contains 15% fraction of 2,1,3-benzothiadiazole (BT) units (PFC3NBT) has been obtained. PFC3NBT demonstrates intramolecular energy transfer from the fluorene segments to BT sites when negatively charged species (SDS or DNAs) are added, following by a shift in emission color from blue to green, has been developed. The high density of positive charges and pendent short alkyl chains of N-propyltrimethylammoniums endow PFC3NBT with high solubility and high fluorescence quantum efficiency of 33.6% in water. The fluorescence emission properties were investigated in the presence of adverse buffer solutions, different surfactants and DNA strands. Interesting fluorescence emission quenching at short wavelength and fluorescence resonance energy transfer (FRET) induced light-on at BT sites were observed and discussed in detail. Very different from previous reports, the fluorescence emission spectra transition happens with an enhancement of integrated fluorescent intensity. The analytes induced a light-up sensing system was studied with a PFC3NBT/SDS complex mode and confirmed with DNA/DNA-FAM sensing systems. More exciting preliminary results on label-free sensing of tumor markers were also reported by investigating the unique fluorescence response to 11 kinds of proteins. These results provide a new insight view for designing CPEs with light-up and label-free features for biomolecular sensing.

Color-Convertible, Unimolecular, Micelle-Based, Activatable Fluorescent Probe for Tumor-Specific Detection and Imaging In Vitro and In Vivo

Recent years have witnessed significant progress in molecular probes for cancer diagnosis. However, the conventional molecular probes are designed to be "always-on" by attachment of tumor-targeting ligands, which limits their abilities to diagnose tumors universally due to the variations of targeting efficiency and complex environment in different cancers. Here, it is proposed that a color-convertible, activatable probe is responding to a universal tumor microenvironment for tumor-specific diagnosis without targeting ligands. Based on the significant hallmark of up-regulated hydrogen peroxide (H₂ O₂ ) in various tumors, a novel unimolecular micelle constructed by boronate coupling of a hydrophobic hyperbranched poly(fluorene-co-2,1,3-benzothiadiazole) core and many hydrophilic poly(ethylene glycol) arms is built as an H₂ O₂ -activatable fluorescent nanoprobe to delineate tumors from normal tissues through an aggregation-enhanced fluorescence resonance energy transfer strategy. This color-convertible, activatable nanoprobe is obviously blue-fluorescent in various normal cells, but becomes highly green-emissive in various cancer cells. After intravenous injection to tumor-bearing mice, green fluorescent signals are only detected in tumor tissue. These observations are further confirmed by direct in vivo and ex vivo tumor imaging and immunofluorescence analysis. Such a facile and simple methodology without targeting ligands for tumor-specific detection and imaging is worthwhile to further development.

Synthesis, Structure, Properties, and Bioimaging of a Fluorescent Nitrogen-Linked Bisbenzothiadiazole

This paper describes the synthesis, structure, photophysical properties, and bioimaging application of a novel 2,1,3-benzothiadiazole (BTD)-based rationally designed fluorophore. The capability of undergoing efficient stabilizing processes from the excited state allowed the novel BTD derivative to be used as a stable probe for bioimaging applications. No notable photobleaching effect or degradation could be observed during the experimental time period. Before the synthesis, the molecular architecture of the novel BTD derivative was evaluated by means of DFT calculations to validate the chosen design. Single-crystal X-ray analysis revealed the nearly flat characteristics of the structure in a syn conformation. The fluorophore was successfully tested as a live-cell-imaging probe and efficiently stained MCF-7 breast cancer cell lineages.

New Red-Emitting Conjugated Polyelectrolyte: Stabilization by Interaction with Biomolecules and Potential Use as Drug Carriers and Bioimaging Probes

The design and development of fluorescent conjugated polyelectrolytes (CPEs) emitting in the red region of the visible spectrum is at present of great interest for bioimaging studies. However, despite the wide variety of CPEs available, stable bright red-emitters remain scarce due to their low solubility and instability in aqueous media, consequently limiting their applications. In this work, we have synthesized and characterized a new red-emitting cationic conjugated polyelectrolyte copoly-{[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]-2,7-(fluorene)-alt-1,4-(naphtho[2,3c]-1,2,5-thiadiazole)} bromide (HTMA-PFNT), based on the incorporation of naphtha[2,3c][1,2,5] thiadiazole on fluorene backbone to increase the bathochromic emission, extending the conjugation length in the polymer backbone. Water stabilization was achieved by binding the polyelectrolyte to two different biological systems which are currently used as nanocarriers: human serum albumin (HSA) and lipid vesicles. Using both systems, stable nanostructures of different composition were obtained and their properties were characterized. The properties of the protein-based nanoparticles are consistent with polyelectrolyte aggregates covered with HSA molecules, while the liposome system is composed of lipid vesicles coated with polyelectrolyte chains partially inserted in the bilayer. Both protein and vesicle structural integrity were not affected after their interaction with HTMA-PFNT, as well as the carrier properties, allowing for the binding and transport of ligands. In addition, the nanoparticles displayed the ability of labeling the cell membrane of living cells. All these results extend the potential applications of these novel multifunctional nanoparticles as therapeutic carriers and bioimaging probes.

Synthesis and application of a novel poly-l-phenylalanine electroactive macromonomer as matrix for the biosensing of ‘Abused Drug’ model

The synthesis and biosensing application of a novel poly-l-phenylalanine-bearing electroactive macromonomer has been carried out.

Anionic conjugated polytriazole: direct preparation, aggregation-enhanced emission, and highly efficient Al3+ sensing

AEE-active anionic conjugated polytriazole was directly prepared by Cu(i)-catalyzed click polymerization, which could be used to specifically and sensitively detect Al³⁺.

Tuning cell surface charge in E. coli with conjugated oligoelectrolytes

Conjugated oligoelectrolytes intercalate into and associate with membranes, thereby changing the surface charge of microbes, as determined by zeta potential measurements.

Cationic conjugated oligoelectrolytes (COEs) varying in length and structural features are compared with respect to their association with E. coli and their effect on cell surface charge as determined by zeta potential measurements. Regardless of structural features, at high staining concentrations COEs with longer molecular dimensions associate less, but neutralize the negative surface charge of E. coli to a greater degree than shorter COEs.

Photophysical, electrochemical, and spectroelectrochemical investigation of electronic push–pull benzothiadiazole fluorophores

Two electronic push–pull fluorophores consisting of a benzothiadiazole core and a terminal N,N-dimethylamino electron donating group were prepared. The effect of the terminal electron withdrawing group (–NO2 and –CN) on the spectroscopic, electrochemical, and spectroelectrochemical properties were examined. The fluorophores were solvatochromic with Stokes shifts upward of 9000 cm−1 being observed in aprotic solvents of varying polarity. It was found that the fluorophores fluoresced appreciably (86 % > Φfl > 18 %) in hexane, toluene, diethyl ether, dichloromethane, ethyl acetate, and THF. The fluorescence was quenched in acetonitrile, acetone, and DMSO. The fluorophores also fluoresced appreciably in thin films when embedded in poly(methyl methacrylate) and poly(dimethylsiloxane) matrices. Protonating the terminal amine with trifluoroacetic acid quenched the intramolecular charge transfer band, although the fluorophores remained fluorescent. The fluorophores could also be reversibly oxidized electrochemically. The resulting oxidized state was visually different than the neutral form. Electrochemical oxidation also led to reversible changes in both the fluorescence wavelength and intensity.