Polymerized and Colloidal Ionic Liquids─Syntheses and Applications

The breadth and importance of polymerized ionic liquids (PILs) are steadily expanding, and this review updates advances and trends in syntheses, properties, and applications over the past five to six years. We begin with an historical overview of the genesis and growth of the PIL field as a subset of materials science. The genesis of ionic liquids (ILs) over nano to meso length-scales exhibiting 0D, 1D, 2D, and 3D topologies defines colloidal ionic liquids, CILs, which compose a subclass of PILs and provide a synthetic bridge between IL monomers (ILMs) and micro to macro-scale PIL materials. The second focus of this review addresses design and syntheses of ILMs and their polymerization reactions to yield PILs and PIL-based materials. A burgeoning diversity of ILMs reflects increasing use of nonimidazolium nuclei and an expanding use of step-growth chemistries in synthesizing PIL materials. Radical chain polymerization remains a primary method of making PILs and reflects an increasing use of controlled polymerization methods. Step-growth chemistries used in creating some CILs utilize extensive cross-linking. This cross-linking is enabled by incorporating reactive functionalities in CILs and PILs, and some of these CILs and PILs may be viewed as exotic cross-linking agents. The third part of this update focuses upon some advances in key properties, including molecular weight, thermal properties, rheology, ion transport, self-healing, and stimuli-responsiveness. Glass transitions, critical solution temperatures, and liquidity are key thermal properties that tie to PIL rheology and viscoelasticity. These properties in turn modulate mechanical properties and ion transport, which are foundational in increasing applications of PILs. Cross-linking in gelation and ionogels and reversible step-growth chemistries are essential for self-healing PILs. Stimuli-responsiveness distinguishes PILs from many other classes of polymers, and it emphasizes the importance of segmentally controlling and tuning solvation in CILs and PILs. The fourth part of this review addresses development of applications, and the diverse scope of such applications supports the increasing importance of PILs in materials science. Adhesion applications are supported by ionogel properties, especially cross-linking and solvation tunable interactions with adjacent phases. Antimicrobial and antifouling applications are consequences of the cationic nature of PILs. Similarly, emulsion and dispersion applications rely on tunable solvation of functional groups and on how such groups interact with continuous phases and substrates. Catalysis is another significant application, and this is an historical tie between ILs and PILs. This component also provides a connection to diverse and porous carbon phases templated by PILs that are catalysts or serve as supports for catalysts. Devices, including sensors and actuators, also rely on solvation tuning and stimuli-responsiveness that include photo and electrochemical stimuli. We conclude our view of applications with 3D printing. The largest components of these applications are energy related and include developments for supercapacitors, batteries, fuel cells, and solar cells. We conclude with our vision of how PIL development will evolve over the next decade.

All poly(ionic liquid) block copolymer nanoparticles from antagonistic isomeric macromolecular blocks via aqueous RAFT polymerization-induced self-assembly

All-poly(ionic liquid) block copolymer nanoparticles are prepared by aqueous RAFT PISA using a couple of isomeric ionic liquid monomers leading to macromolecular building blocks with antagonistic solution behavior in water.

What will happen when thermoresponsive poly(N-isopropylacrylamide) is tethered on poly(ionic liquid)s?

The thermoresponsive ionic liquid diblock copolymer of poly[1-(4-vinylbenzyl)-3-methylimidazolium tetrafluoroborate]-block-poly(N-isopropylacrylamide) (P[VBMI][BF₄]-b-PNIPAM) containing a hydrophilic poly(ionic liquid) block of P[VBMI][BF₄] is prepared by sequential reversible addition-fragmentation chain transfer (RAFT) polymerization. This P[VBMI][BF₄]-b-PNIPAM exhibits an abnormal thermoresponsive phase transition at a temperature above the phase transition temperature (PTT) of the PNIPAM block. For P[VBMI][BF₄]-b-PNIPAM including a short P[VBMI][BF₄] block, its aqueous solution becomes turbid at a temperature above the PTT of the thermoresponsive PNIPAM block, whereas for P[VBMI][BF₄]-b-PNIPAM containing a relatively long P[VBMI][BF₄] block even in the case of a relatively long PNIPAM block, the aqueous solution remains transparent at a temperature far above the PTT of the PNIPAM block, although a soluble-to-insoluble phase transition of the PINIPAM block is confirmed by dynamic light scattering (DLS) analysis and variable temperature ¹H NMR analysis. The reason that P[VBMI][BF₄]-b-PNIPAM exhibits an abnormal thermoresponse is discussed and ascribed to the highly hydrophilic and charged poly(ionic liquid) block of P[VBMI][BF₄] leading to the formation of small-sized micelles at a temperature above the PTT.

Frontiers in poly(ionic liquid)s: syntheses and applications

We review recent works on the synthesis and application of poly(ionic liquid)s (PILs). Novel chemical structures, different synthetic strategies and controllable morphologies are introduced as a supplement to PIL systems already reported. The primary properties determining applications, such as ionic conductivity, aqueous solubility, thermodynamic stability and electrochemical/chemical durability, are discussed. Furthermore, the near-term applications of PILs in multiple fields, such as their use in electrochemical energy materials, stimuli-responsive materials, carbon materials, and antimicrobial materials, in catalysis, in sensors, in absorption and in separation materials, as well as several special-interest applications, are described in detail. We also discuss the limitations of PIL applications, efforts to improve PIL physics, and likely future developments.

Thermo-responsive poly(N-isopropylacrylamide)-block-poly(ionic liquid) of pyridinium sulfonate immobilized Pd nanoparticles in C–C coupling reactions

A thermo-responsive poly(N-isopropylacrylamide)-block-poly(ionic liquid) (PNIPAM-b-PIL) of pyridinium-type was prepared. Initially, controlled synthesis of PNIPAM was performed via RAFT method. Subsequently, PNIPAM as macromolecular chain transfer agent (macro-CTA) was used for fabrication of PNIPAM-b-PIL through reaction with a synthesized IL monomer i.e. 4-vinyl pyridinium propane sulfonate. The Pd catalyst was produced throughout palladium nanoparticles' anchoring into this block copolymer. The catalyst was characterized using ICP, FT-IR, NMR, UV-Vis, TGA, XRD, SEM and EDX techniques. The catalyst's TEM image proved nearly fine dispersion of PdNPs with negligible agglomeration. The catalyst was used in the production of a variety of substituted alkenes and biaryl compounds (Heck and Suzuki coupling) in organic and aqueous media and under solvent free conditions. Additionally, the results signified extreme reusability of the catalyst with a simple recycling procedure.

Preparation of thermo-responsive PNIPAM-b-PIL/PdNPs via RAFT method and its catalytic behavior in C–C coupling with extreme reusability.

Synthesis of poly(ionic liquid)-based nano-objects with morphological transitionsviaRAFT polymerization-induced self-assembly in ethanol

A full range of morphologies including spheres, worms and vesicles was observed in poly(ionic liquid)-based block copolymer nano-objectsviaethanolic dispersion polymerization.

Ionic Conductivity and Assembled Structures of Imidazolium Salt-Based Block Copolymers with Thermoresponsive Segments

Ionic liquid-based block copolymers composed of ionic (solubility tunable)⁻nonionic (water-soluble and thermoresponsive) segments were synthesized to explore the relationship between ionic conductivity and assembled structures. Three block copolymers, comprising poly(N-vinylimidazolium bromide) (poly(NVI-Br)) as a hydrophilic poly(ionic liquid) segment and thermoresponsive poly(N-isopropylacrylamide) (poly(NIPAM)), having different compositions, were initially prepared by RAFT polymerization. The anion-exchange reaction of the poly(NVI-Br) in the block copolymers with lithium bis(trifluoromethanesulfonyl)imide (LiNTf₂) proceeded selectively to afford amphiphilic block copolymers composed of hydrophobic poly(NVI-NTf₂) and hydrophilic poly(NIPAM). Resulting poly(NVI-NTf₂)-b-poly(NIPAM) exhibited ionic conductivities greater than 10-3 S/cm at 90 °C and 10-4 S/cm at 25 °C, which can be tuned by the comonomer composition and addition of a molten salt. Temperature-dependent ionic conductivity and assembled structures of these block copolymers were investigated, in terms of the comonomer composition, nature of counter anion and sample preparation procedure.

PDMAEMA-b-PLMA-b-POEGMA triblock terpolymers via RAFT polymerization and their self-assembly in aqueous solutions

Novel PDMAEMA-b-PLMA-b-POEGMA triblock terpolymers were synthesized by RAFT polymerization. Triblock polyelectrolytes were obtained by quaternization. PDMAEMA-b-PLMA-b-POEGMA and QPDMAEMA-b-PLMA-b-POEGMA terpolymers self-assemble into spherical micelles with a mixed corona in aqueous media.

Graphene-philic surfactants for nanocomposites in latex technology

Graphene is the newest member of the carbon family, and has revolutionized materials science especially in the field of polymer nanocomposites. However, agglomeration and uniform dispersion remains an Achilles' heel (even an elephant in the room), hampering the optimization of this material for practical applications. Chemical functionalization of graphene can overcome these hurdles but is often rather disruptive to the extended pi-conjugation, altering the desired physical and electronic properties. Employing surfactants as stabilizing agents in latex technology circumvents the need for chemical modification allowing for the formation of nanocomposites with retained graphene properties. This article reviews the recent progress in the use of surfactants and polymers to prepare graphene/polymer nanocomposites via latex technology. Of special interest here are surfactant structure-performance relationships, as well as background on the roles surfactant-graphene interactions for promoting stabilization.

Controlled radical polymerization and in-depth mass-spectrometric characterization of poly(ionic liquid)s and their photopatterning on surfaces

Poly(ionic liquid)s (PILs) bearing a polystyrene backbone preparedviaRAFT polymerization and their photolithographic patterning on silicon wafers is reported.

Unexpected LCST-type phase behaviour of a poly(vinyl thiazolium) polymer in acetone

A poly(vinyl thiazolium) polymer in acetone solution exhibited an unexpected lower critical solution temperature (LCST)-type phase transition.

Polymerized imidazolium ionic liquids crosslinking sulfonated poly(ether ether ketone) (SPEEK) for high-temperature proton exchange membrane

An ionic liquid (IL) monomer of (acryloyloxy)propanylimidazolium chloride with unsaturated carbon–carbon double bonds was synthesized.

Thiazolium Poly(ionic liquid)s: Synthesis and Application as Binder for Lithium-Ion Batteries

We report a synthetic route to thiazolium-type poly(ionic liquid)s (PILs), which can be applied as a polymeric binder in lithium-ion batteries. The ionic liquid monomers were first synthesized by quaternization reaction of 4-methyl-5-vinyl thiazole with methyl iodide, followed by anion exchange reactions to replace iodide by fluorinated anions to access a liquid state below 100 °C. Subsequently, these monomers bearing thiazolium cations in their structure underwent radical polymerizations in bulk to produce corresponding polymers. The dependence of solution and thermal properties of such monomeric and polymeric materials on the choice of the counteranion was investigated. Finally, the thiazolium-type PIL bearing a bis(trifluoromethanesulfonyl)imide (TFSI) anion was proven to be a high performance binder for lithium-ion battery electrodes.

Salt-Responsive Polysulfabetaines from Acrylate and Acrylamide Precursors: Robust Stabilization of Metal Nanoparticles in Hyposalinity and Hypersalinity

Metal nanoparticles (MNps) tend to be influenced by environmental factors such as pH, ionic strength, and temperature, thereby leading to aggregation. Forming stable aqueous dispersions could be one way of addressing the environmental toxicity of MNps. In contrast to the electrolyte-induced aggregation of MNps, novel zwitterionic sulfabetaine polymers reported here act as stabilizers of MNps even under high salinity. Polysulfabetaines exhibited unique solubility and swelling tendencies in brine and deionized water, respectively. The polysulfabetaines derived from methacrylate (PSBMA) and methacrylamide (PSBMAm) also showed reversible salt-responsive and thermoresponsive behaviors as confirmed by cloud-point titration, transmittance, and dynamic light scattering studies. The brine soluble nature was explored for its ability to be used as a capping agents to form metal nanoparticles using formic acid as a reducing agent. Thus, silver and noble metal (gold and palladium) nanoparticles were synthesized. The nanoparticles formed were characterized by UV-vis, XRD, TEM, EDX, and DLS studies. The size of the nanoparticles remained more or less the same even after 2 months of storage in 2 M sodium chloride solution under ambient conditions and also at elevated temperatures as confirmed by light-scattering measurements. The tunable, stimuli-responsive polysulfabetaine-capped stable MNp formed under low (hyposalinity) and hypersalinity could find potential applications in a variety of areas.

Thermoresponsive polyelectrolytes derived from ionic liquids

In this review we summarise recent progress on the design, properties, and potential applications of ionic liquid-derived polyelectrolytes showing thermoresponsive phase behaviour after mixing with water or other organic solvents.

Synthesis and characterization of “comb-like” poly(ionic liquid-co-styrene): expected applications in graphene dispersion and CO2 separation

A new PIL “comb-like” copolymer was synthesized by directly polymerizing ionic liquid monomer by ATRP using macroinitiator. This polymer is potentially useful in graphene dispersion and CO₂ separation.

Direct Route to Well-Defined Poly(ionic liquid)s by Controlled Radical Polymerization in Water

The precision synthesis of poly(ionic liquid)s (PILs) in water is achieved for the first time by the cobalt-mediated radical polymerization (CMRP) of N-vinyl-3-alkylimidazolium-type monomers following two distinct protocols. The first involves the CMRP of various 1-vinyl-3-alkylimidazolium bromides conducted in water in the presence of an alkyl-cobalt(III) complex acting as a monocomponent initiator and mediating agent. Excellent control over molar mass and dispersity is achieved at 30 °C. Polymerizations are complete in a few hours, and PIL chain-end fidelity is demonstrated up to high monomer conversions. The second route uses the commercially available bis(acetylacetonato)cobalt(II) (Co(acac)₂) in conjunction with a simple hydroperoxide initiator (tert-butyl hydroperoxide) at 30, 40, and 50 °C in water, facilitating the scaling-up of the technology. Both routes prove robust and straightforward, opening new perspectives onto the tailored synthesis of PILs under mild experimental conditions in water.

Aqueous graphene dispersions-optical properties and stimuli-responsive phase transfer

We demonstrate essentially complete exfoliation of graphene aggregates in water at concentrations up to 5% by weight (166-fold greater than previous high concentration report) using recently developed triblock copolymers and copolymeric nanolatexes based on a reactive ionic liquid acrylate surfactant. We demonstrate that the visible absorption coefficient in aqueous dispersion, 48.9 ± 1.3 cm(2)/mg at 500 nm, is about twice that currently accepted, and we show that this value is a greatest lower bound to extant macroscopic single sheet optical studies of graphene when one considers both fine structure constant and excitonic mechanisms of visible absorption. We also show that dilute and concentrated graphene dispersions are rheo-optical fluids that exhibit an isotropic to nematic transition upon application of a shear field, and we demonstrate stimuli-responsive phase transfer.

Thermomechanical Synergisms from Ionic Liquid Doping of Poly(methyl methacrylate)

A synergism between methyl methacrylate and an amphiphilic ionic liquid acrylate 1-(11-acryloyloxyundecyl)-3-methyl imidazolium bromide (IL) not only increases the apparent thermal stability (kinetic retardation of thermal decomposition) of poly(MMA-co-IL) copolymers by 50 °C at relatively low doping levels of 0.5 mol %, but also increases the storage (∼10%) and loss (15-25%) moduli over 0-75 °C (increasing the elasticity). Moderate to high doping levels provide plasticization without the risk of leaching or plasticizer contamination.

Cationic Poly(ionic liquid) with Tunable Lower Critical Solution Temperature-Type Phase Transition

A cationic polyelectrolyte based on the styrenic ionic liquid tributyl-4-vinylbenzylphosphonium pentanesulfonate was found to undergo a lower critical solution temperature (LCST)-type phase transition in aqueous solutions. This phase transition occurs in a wide temperature range in terms of polymer concentration as well as type and concentration of externally added salts. Anion exchange and salting out effects are responsible for the flexible phase transition temperature.