Cyclooctyne End-Functionalized Poly(morpholine-2,5-dione)s

The cyclooctyne-functionalized alcohol (1R,8S,9S)-bicyclo-[6.1.0]non-4-yn-9-ylmethanol (BCN-OH) is applied as initiator for the organo-catalyzed ring-opening polymerization (ROP) of morpholine-2,5-diones based on the l-amino acids valine, isoleucine, and phenylalanine. The ROP is catalyzed by a binary system of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and 1-(3,5-bis(trifluoromethyl)phenyl)-3-cyclohexylthiourea (TU) applying a feed ratio of [M]/[I]/[DBU]/[TU] of 100/1/1/10. Kinetic studies reveal that BCN-OH is capable to initiate the polymerization of morpholine-2,5-diones, which proceed in a controlled manner until monomer conversions of 80%. Characterization by means of 1H NMR spectroscopy, size exclusion chromatography (SEC), and matrix-assisted laser desorption/ionization-time of flight-mass spectrometry confirm the covalent attachment of the cyclooctyne moiety as α-end group of the poly(morpholine-2,5-dione)s with maximum dispersities of 1.25. As a proof of concept, a vitamin A end-functionalized poly(2-ethyl-2-oxazoline) is coupled to a poly(ester amide) by strain-promoted azide-alkyne cycloaddition. Characterization of the block copolymer by SEC and DOSY NMR spectroscopy confirm the successful attachment of the two building blocks. The versatile cyclooctyne moiety shall facilitate a metal-free attachment of other polymer blocks, targeting ligands or dyes at the α-end group of well-defined poly(morpholine-2,5-dione)s. In consequence, the approach provides access to a new generation of functionalized poly(ester amide)s, which can be customized for specific needs.

An Optimized and Universal Protocol for the Synthesis of Morpholine-2,5-Diones from Natural Hydrophobic Amino Acids and Their Mixture

Morpholine-2,5-diones (MDs) are increasingly attractive compounds that can be produced using amino acid (AA) as a starting material. These compounds can undergo polymerization to produce biodegradable materials, namely, polydepsipeptides, that hold the potential to be used in medicinal applications. In this study, a simplified yet high-yield MD synthesis procedure was developed and applied to produce a range of MDs derived from hydrophobic AAs including Leu, Ile, Val, Phe, Asp(OBzl), Lys(Z), and Ser(tBu). Moreover, using a blend of hydrophobic amino acids (Leu, Ile, Val, and Phe), mixtures of MDs could be synthesized simultaneously. Finally, the polymerization of these MD mixtures was probed and proven successful. The concept investigated herein constitutes a novel path toward the valorization of protein-rich waste by producing renewable and biodegradable materials.

Recyclable and (Bio)degradable Polyesters in a Circular Plastics Economy

Polyesters carrying polar main-chain ester linkages exhibit distinct material properties for diverse applications and thus play an important role in today's plastics economy. It is anticipated that they will play an even greater role in tomorrow's circular plastics economy that focuses on sustainability, thanks to the abundant availability of their biosourced building blocks and the presence of the main-chain ester bonds that can be chemically or biologically cleaved on demand by multiple methods and thus bring about more desired end-of-life plastic waste management options. Because of this potential and promise, there have been intense research activities directed at addressing recycling, upcycling or biodegradation of existing legacy polyesters, designing their biorenewable alternatives, and redesigning future polyesters with intrinsic chemical recyclability and tailored performance that can rival today's commodity plastics that are either petroleum based and/or hard to recycle. This review captures these exciting recent developments and outlines future challenges and opportunities. Case studies on the legacy polyesters, poly(lactic acid), poly(3-hydroxyalkanoate)s, poly(ethylene terephthalate), poly(butylene succinate), and poly(butylene-adipate terephthalate), are presented, and emerging chemically recyclable polyesters are comprehensively reviewed.

Organocatalyzed Ring-Opening Polymerization of (S)-3-Benzylmorpholine-2,5-Dione

A 3-benzylmorpholine-2,5-dione monomer is synthesized from the natural amino acid l-phenylalanine and characterized by means of nuclear magnetic resonance and infrared spectroscopy, electrospray ionization mass spectrometry, and elemental analysis. Subsequent to preliminary polymerization studies, a well-defined poly(ester amide) homopolymer is synthesized via ring-opening polymerization using a binary catalyst system comprising 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and a 1-(3,5-bis(trifluoromethyl)phenyl)-3-cyclohexylthiourea (TU) cocatalyst with a feed ratio of M/I/DBU/TU = 100/1/1/10. Kinetic studies reveal high controllability of the dispersities and molar masses up to conversions of almost 80%. Analysis by mass spectrometry hints toward excellent end-group fidelity at these conditions. In consequence, utilization of hydroxyl-functionalized poly(ethylene glycol) and poly(2-ethyl-2-oxazoline) as macroinitiators results in amphiphilic block copolymers. Bulk miscibility of the building blocks is indicated by differential scanning calorimetry investigations. As more and more promising new drugs are based on hydrophobic molecules featuring aromatic moieties, the novel polyesteramides seem highly promising materials to be used as potential drug delivery vehicles.

Recent Advances of Poly(ester amide)s-Based Biomaterials

Biodegradable and biocompatible biomaterials have offered much more opportunities from an engineering standpoint for treating diseases and maintaining health. Poly(ester amide)s (PEAs), as an outstanding family among such biomaterials, have risen overwhelmingly in the past decades. These synthetic polymers have easily and widely available raw materials and a diversity of synthetic approaches, which have attracted considerable attention. More importantly, combining the superiorities of polyamides and polyesters, PEAs have emerged with better functions. They could have improved biodegradability, biocompatibility, and cell-material interactions. The PEAs derived from α-amino acids even allow the introduction of pendant sites for further modification or functionalization. Meanwhile, it is gradually recognized that the chemical structures are closely related to the physiochemical and biological properties of PEAs so that their properties can be precisely controlled. PEAs therefore become significant materials in the biomedical fields. This review will attempt to summarize the recent progress in the development of PEAs with respect to the preparation materials and methods, structure-property relationships along with their latest biomedical accomplishments, especially for drug delivery and tissue engineering.

Diketomorpholines: Synthetic Accessibility and Utilization

Diketomorpholines (DKMs; morpholine-2,5-diones) possess a six-membered ring with a lactone and lactam moiety and belong to the family of cyclodepsipeptides. In this review, the synthetic accessibility of DKMs is summarized and their utilization, in particular, for ring-opening polymerization reactions, is highlighted. The occurrence of the DKM scaffold in natural products encompasses small monocyclic compounds but also complex, polycyclic representatives with a fused DKM ring.

Facile synthesis of eight-membered cyclic(ester-amide)s and their organocatalytic ring-opening polymerizations

Facile modular synthesis of eight-membered cyclic(ester-amide)s based on phthalic anhydride and β-amino alcohols and organocatalitic ROP of the monomers to afford degradable semi-aromatic poly(ester-amides)s with tunable thermal properties.

Simple and Rapid Mechanochemical Synthesis of Lactide and 3S-(Isobutyl)morpholine-2,5-dione-Based Random Copolymers Using DBU and Thiourea

There is a growing interest surrounding morpholine-2,5-dione-based materials due to their impressive biocompatibility as well as their capacity to break down by hydrolytic and enzymatic pathways. In this study, the ring-opening (co)polymerization of leucine-derived 3S-(isobutyl)morpholine-2,5-dione (MD) and lactide (LA) was performed via ball-milling using a catalytic system composed of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and 3-[3,5-bis(trifluoromethyl)phenyl]-1-cyclohexylthiourea (TU). Once the homopolymerizations of MD and LA optimized and numerous parameters were studied, the mechanochemical ring-opening copolymerization of these monomers was explored. The feasibility of ring-opening copolymerizations in mechanochemical systems was demonstrated and a range of P(MD-co-LA) copolymers were produced with varying proportions of MD (23%, 48%, and 69%). Furthermore, the beneficial cocatalytic effects of TU with regards to ROP control were found to be operative within mechanochemical systems. Further parallels were observed between solution- and mechanochemical-based ROPs.

Formulation of drug-loaded oligodepsipeptide particles with submicron size

The size of particulate carriers is key to their transport and distribution in biological systems, and needs to be tailored in the higher submicron range to enable follicular uptake for dermal treatment. Oligodepsipeptides are promising nanoparticulate carrier systems as they can be designed to exhibit enhanced interaction with drug molecules. Here, a fabrication scheme for drug-loaded submicron particles from oligo[3-(S)-sec-butylmorpholine-2,5-dione]diol (OBMD) is presented based on an emulsion solvent evaporation method with cosolvent, surfactant, and polymer concentration as variable process parameters. The particle size (300-950 nm) increased with lower surfactant concentration and higher oligomer concentration. The addition of acetone increased the particle size at low surfactant concentration. Particle size remained stable upon the encapsulation of models compounds dexamethasone (DXM) and Nile red (NR), having different physicochemical properties. DXM was released faster compared to NR due to its higher water solubility. Overall, the results indicated that both drug-loading and size control of OBMD submicron particles can be achieved. When applied on porcine ear skin samples, the NR-loaded particles have been shown to allow NR penetration into the hair follicle and the depth reached with the 300 nm particles was comparable to the one reached with the cream formulation. A potential benefit of the particles compared to a cream is their sustained release profile.

Iodine-mediated photo-controlled atom transfer radical polymerization (photo-ATRP) and block polymerization combined with ring-opening polymerization (ROP) via a superbase

Most organocatalysts for photo-controlled atom transfer radical polymerization (photo-ATRP) are metal complexes or synthetically elaborate organic dyes, which are toxic and expensive.

Poly(3-ethylglycolide): a well-defined polyester matching the hydrophilic hydrophobic balance of PLA

The novel lactide isomer 3-ethyl-1,4-dioxane-2,5-dione (3-ethylglycolide, EtGly) represented the basis for the development of polyesters varying crystallinity.