Recent Advances of Molecularly Imprinted Polymers Based on Cyclodextrin

β-cyclodextrin imprinted film embedded with methylene blue: A host-guest sensitive electrochemical strategy for PFAS detection

Per- and polyfluoroalkyl substances (PFAS) have raised significant concerns; however, their accurate detection in aqueous environments remains a major challenge. In this study, a host-guest molecularly imprinted polymer-based electrochemical sensor with enhanced antifouling properties were developed using β-cyclodextrin embedded with methylene blue (βCD-MB MIP). This sensor demonstrated sensitive and selective quantification of perfluorooctanoic acid (PFOA) in real water samples. The βCD-MB MIP was fabricated by electro-polymerizing βCD and MB in the presence of the target molecule, PFOA, where βCD served as the functional monomer and MB as the signaling probe. The incorporation of βCD endowed the MIP with a stable hydration layer, promoting hydrophilicity and inhibiting fouling, while ensuring effective electron transfer from MB, resulting in significant current responses and outstanding antifouling performance. This sensor exhibits excellent sensing capabilities towards PFOA with a detection limit of 1.57 pg mL-1, covering a wide concentration range from 4.14 ng mL-1 to 41.4 mg mL-1. It also displayed high selectivity for PFOA with an imprint factor of 6.5, which is five to seven times higher than that of other perfluorinated analogs. This study introduces an innovative platform for the rapid quantification of PFAS using redox-active MIPs and sets the groundwork for developing integrated sensors for continuous PFAS monitoring in water.

Computer-Assisted Strategies as a Tool for Designing Green Monomer-Based Molecularly Imprinted Materials

Molecularly imprinted polymers (MIPs) are defined as artificial receptors due to their selectivity and specificity. Their advantageous properties compared to biological alternatives have sparked interest among scientists, as detailed in numerous review papers. Currently, there is significant attention on adhering to the principles of green chemistry and environmental protection. In this context, MIP research groups have focused on developing eco-friendly procedures. The application of "greener" monomers and reagents, along with the utilization of computational methodologies for design and property analysis, are two activities that align with the green chemistry principles for molecularly imprinted technology. This review discusses the application of computational methodologies in the preparation of MIPs based on eco-friendly non-acrylic/vinylic monomers and precursors, such as alkoxysilanes, ionic liquids, deep eutectic solvents, bio-based molecules-specifically saccharides, and biomolecules like proteins. It provides a brief introduction to MIP materials, the green aspects of MIP production, and the application of computational simulations. Following this, brief descriptions of the studied monomers, molecular simulation studies of green monomer-based MIPs, and computational strategies are presented. Finally, conclusions and an outlook on the future directions of computational analysis in the production of green imprinted materials are pointed out. To the best of my knowledge, this work is the first to combine these two aspects of MIP green chemistry principles.

Properties, evaluation and application of naringin magnetic molecularly imprinted polymer based on synergistic imprinting strategy

A novel and facile surface molecularly imprinted polymer coated on magnetic chitosan (Fe3O4@CS@MIP) was fabricated for the selective recognition and enrichment of naringin (NRG). The Fe3O4@CS@MIP was prepared based on covalent-noncovalent synergistic imprinting strategies, utilizing 4-vinyl phenyl boric acid as covalent functional monomer, deep eutectic solvent (choline chloride/methacrylic acid [ChCl/MAA]) as non-covalent functional monomer and Fe3O4@CS nanoparticles as the magnetic support. The obtained Fe3O4@CS@MIP exhibited a uniform morphology, excellent crystallinity, outstanding magnetic properties, and high surface area. Owing to the double recognition abilities, the resultant polymer showed exceptional binding performance and rapid mass transfer in phosphate buffer (pH 7.0). The maximum binding amount of Fe3O4@CS@MIP was found to be 15.08 mg g-1, and the equilibrium adsorption could be achieved within 180 min. Moreover, they also exhibited stronger selectivity for NRG and satisfactory reusability, with only 11.0% loss after five adsorption-desorption cycles. Additionally, the Fe3O4@CS@MIP, serving as an adsorbent, presented practical application potential in the separation and enrichment of NRG from pummelo peel, with extraction efficiency in the range of 79.53% to 84.63%. This work provided a new strategy for improving the performance of MIP and contributed an attractive option for the extraction of NRG in complex samples.

High selectivity molecularly imprinted polymer based on short amylose as bio-based functional monomers for selective extraction of λ-cyhalothrin

Nowadays, the development of sustainable molecularly imprinted polymers (MIPs) with high selectivity is still challenging due to the limitations of bio-based functional monomers. In this study, the highly selective and porous MIPs (LC-TMIPs) were designed and prepared on short amylose (SAM) as bio-based functional monomers, λ-cyhalothrin (LC) as a template molecule, and tetrafluoroterephthalonitrile as a rigid crosslinking agent. Static, dynamic, and selective adsorption experiments were conducted to investigate the adsorption performance. The results indicated that, compared to MIPs prepared using epichlorohydrin as flexible crosslinking agents, LC-TMIPs exhibited higher imprinting factor (3.93), selectivity (5.78), and adsorption capacity (35.79 mg g-1), as well as faster adsorption/desorption kinetics. The LC-TMIPs were used as sorbents for the selective determination of LC in both apple and cucumber samples by high-performance liquid chromatography. Under the optimal extraction conditions, the recoveries of the method reached 92.1-106.1 %, with a linear range of 1.5-30 ng g-1 and a detection limit of 0.5 ng g-1. The proposed preparation method of LC-TMIPs is expected to open a new way to prepare highly selective and sustainable MIPs for hydrophobic compounds.

Molecularly Imprinted Electrochemical Sensor Based on α-Cyclodextrin Inclusion Complex and MXene Modification for Highly Sensitive and Selective Detection of Alkylresorcinols in Whole Wheat Foods

Authenticating whole wheat foods poses a significant challenge for both the grain industry and consumers. Alkylresorcinols (ARs), serving as biomarkers of whole wheat, play a crucial role in assessing the authenticity of whole wheat foods. Herein, we introduce a novel molecularly imprinted electrochemical sensor with modifications involving a molecularly imprinted polymer (MIP) and MXene nanosheets, enabling highly sensitive and selective detection of ARs. Notably, we specifically chose 5-heneicosylresorcinol (AR21), the predominant homologue in whole wheat, as the template molecule. α-Cyclodextrin and acrylamide served as dual functional monomers, establishing a robust multiple interaction between the MIP and AR21. As a result, the sensor exhibited a wide linear range of 0.005 to 100 μg·mL-1 and a low detection limit of 2.52 ng·mL-1, demonstrating exceptional selectivity and stability. When applied to commercial whole wheat foods, the assay achieved satisfactory recoveries and accuracy, strongly validating the practicality and effectiveness of this analytical technique.

Removal of contaminants present in water and wastewater by cyclodextrin-based adsorbents: A bibliometric review from 1993 to 2022

Cyclodextrin (CD), a cyclic oligosaccharide from enzymatic starch breakdown, plays a crucial role in pharmaceuticals, food, agriculture, textiles, biotechnology, chemicals, and environmental applications, including water and wastewater treatment. In this study, a statistical analysis was performed using VOSviewer and Citespace to scrutinize 2038 articles published from 1993 to 2022. The investigation unveiled a notable upsurge in pertinent articles and citation counts, with China and USA contributing the highest publication volumes. The prevailing research focus predominantly revolves around the application of CD-based materials used as adsorbents to remove conventional contaminants such as dyes and metals. The CD chemistry allows the construction of materials with various architectures, including cross-linked, grafted, hybrid or supported systems. The main adsorbents are cross-linked CD polymers, including nanosponges, fibres and hybrid composites. Additionally, research efforts are actually concentrated on the synthesis of CD-based membranes, CD@graphene oxide, and CD@TiO2. These materials are proposed as adsorbents to remove emerging pollutants. By employing bibliometric analysis, this study delivers a comprehensive retrospective review and synthesis of research concerning CD-based adsorbents for the removal of contaminants from wastewater, thereby offering valuable insights for future large-scale application of CD-based adsorption materials.

A new difunctional liquid crystal nanosurface molecularly imprinted polyitaconic acid nanoprobe for SERS/RRS determination of ultratrace melamine

In this paper, a new dimode scattering spectral method for rapid detection of ultratrace melamine (ML) in dairy products was established by coupling nanosurface molecular imprinting technology with nanocatalytic amplification reaction of liquid crystal particles. It was found that liquid crystal cholesteryl butyrate (CBU) nanosurface imprinted polymers (CBU@MIP) not only recognized ML but also catalyzed the nano indicator reaction of HAuCl4-sodium formate to produce gold nanoparticles with surface-enhanced Raman scattering (SERS) and resonance Rayleigh scattering (RRS) effect. When ML was added, it specifically combined with CBU@MIP to form CBU@MIP-ML conjugates with strong catalytic activity, and SERS and RRS signals increased linearly with the detection limits of 0.0072 pmol/L and 0.093 pmol/L respectively. The method was applied to the determination of ML in dairy products and plastic tablewares with relative standard deviation (RSD) of 2.2-4.4 % and 1.6-4.7 %, and recovery of 95.4 %-108.3 % and 95.9-108.6  % respectively.

Assessing the greenification potential of cyclodextrin-based molecularly imprinted polymers for pesticides detection

Cyclodextrins, with their unparalleled attributes of eco-friendliness, natural abundance, versatile utility, and facile functionalization, make a paramount contribution to the field of molecular imprinting. Leveraging the unique properties of cyclodextrins in molecularly imprinted polymers synthesis has revolutionized the performance of molecularly imprinted polymers, resulting in enhanced adsorption selectivity, capacity, and rapid extraction of pesticides, while also circumventing conventional limitations. As the concern for food quality and safety continues to grow, the need for standard analytical methods to detect pesticides in food and environmental samples has become paramount. Cyclodextrins, being non-toxic and biodegradable, present an attractive option for greener reagents in imprinting polymers that can also ensure environmental safety post-application. This review provides a comprehensive summary of the significance of cyclodextrins in molecular imprinting for pesticide detection in food and environmental samples. The recent advancements in the synthesis and application of molecularly imprinted polymers using cyclodextrins have been critically analyzed. Furthermore, the current limitations have been meticulously examined, and potential opportunities for greenification with cyclodextrin applications in this field have been discussed. By harnessing the advantages of cyclodextrins in molecular imprinting, it is possible to develop highly selective and efficient methods for detecting pesticides in food and environmental samples while also addressing the challenges of sustainability and environmental impact.

Enantioselective Labeling of Zebrafish for D-Phenylalanine Based on Graphene-Based Nanoplatform

Enantioselective labeling of important bioactive molecules in complex biological environments by artificial receptors has drawn great interest. From both the slight difference of enantiomers' physicochemical properties and inherently complexity in living organism point of view, it is still a contemporary challenge for preparing practical chiral device that could be employed in the model animal due to diverse biological interference. Herein, we introduce γ-cyclodextrin onto graphene oxide for fabricating γ-cyclodextrin and graphene oxide assemblies, which provided an efficient nanoplatform for chiral labelling of D-phenylalanine with higher chiral discrimination ratio of KD/KL = 8.21. Significantly, the chiral fluorescence quenching effect of this γ-CD-GO nanoplatform for D-phenylalanine enantiomer in zebrafish was 7.0-fold higher than L-isomer, which exhibiting real promise for producing practical enantio-differentiating graphene-based systems in a complex biological sample.

Cyclodextrins as eminent constituents in nanoarchitectonics for drug delivery systems

Cyclodextrins have been widely employed for drug delivery systems (DDSs) in which drugs are selectively delivered to a target site in the body. Recent interest has been focused on the construction of cyclodextrin-based nanoarchitectures that show sophisticated DDS functions. These nanoarchitectures are precisely fabricated based on three important features of cyclodextrins, namely (1) the preorganized three-dimensional molecular structure of nanometer size, (2) the easy chemical modification to introduce functional groups, and (3) the formation of dynamic inclusion complexes with various guests in water. With the use of photoirradiation, drugs are released from cyclodextrin-based nanoarchitectures at designated timing. Alternatively, therapeutic nucleic acids are stably protected in the nanoarchitectures and delivered to the target site. The efficient delivery of the CRISPR-Cas9 system for gene editing was also successful. Even more complicated nanoarchitectures can be designed for sophisticated DDSs. Cyclodextrin-based nanoarchitectures are highly promising for future applications in medicine, pharmaceutics, and other relevant fields.

Pickering emulsions stabilized by β-CD microcrystals: Construction and interfacial assembly mechanism

β-Cyclodextrin (β-CD) can combine with oil and other guest molecules to form amphiphilic inclusion complexes (ICs), which can be adsorbed on the oil-water interface to reduce the interfacial tension and stabilize Pickering emulsions. However, the subtle change of β-CD in the process of emulsion preparation is easily ignored. In this study, β-CD and ginger oil (GO) were used to prepare the Pickering emulsion by high-speed shearing homogenization without an exogenous emulsifier. The stability of the emulsion was characterized by microscopic observation, staining analysis, and creaming index (CI). Results showed that the flocculation of the obtained Pickering emulsion was serious, and the surface of the droplets was rough with lamellar particles. In order to elucidate the formation process of the layered particles, the GO/β-CD ICs were further prepared by ball milling method, and the X-ray diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), and interfacial tension analyses found that β-CD and GO first formed amphiphilic nanoscale small particles (ICs) through the host-guest interaction, and the formed small particles were further self-assembled into lamellar micron-scale amphiphilic ICs microcrystals. These amphiphilic ICs and microcrystals aggregated at the oil-water interface and finally formed the Pickering emulsion. In this study, by exploring the formation process and evolution of GO/β-CD self-assembly, the formation process and stabilization mechanism of the β-CD-stabilized GO Pickering emulsion were clarified preliminarily, with the aim of providing a theoretical basis for the development of high-performance CD-stabilized Pickering emulsions.

Development of a Redox-Label-Doped Molecularly Imprinted Polymer on β-Cyclodextrin/Reduced Graphene Oxide for Electrochemical Detection of a Stress Biomarker

Cortisol is a major stress biomarker involved in the regulation of metabolic and immune responses. Readily accessible assays with sufficient quantitative and temporal resolution can assist in prevention, early diagnosis, and management of chronic diseases. Whereas conventional assays are costly in terms of time, labor, and capital, an electrochemical approach offers the possibility of miniaturization and detection at the point-of-care. Here, we investigate the biosensor application of molecularly imprinted polypyrrole (PPy) doped with hexacyanoferrate (HCF) and coupled to reduced graphene oxide functionalized with β-cyclodextrin (β-CD). β-CD provides an inclusion site for lipophilic cortisol and was electrochemically grafted simultaneous with reduction of GO. Next, PPy was electrochemically deposited in presence of cortisol template with HCF dopant ions serving as intrinsic redox probe. Thus, the sensor response was evaluated via changes of redox peak current in cyclic voltammetry and demonstrated a broad logarithmic detection range (5 pg/mL to 5000 ng/mL, R ² = 0.995), with a sensitivity of 8.809 μA log^-1 (ng/mL) cm^-2 and LOD of 19.3 pM. The sensor was shown to be specific toward cortisol in reference to salivary cortisol concentration in saliva over structural analogues. The sensor was exhibited to determine cortisol in artificial saliva at normal and elevated levels. The good performance and facile electrochemical fabrication of this antibody- and external label-free interface are promising for the development of affordable point-of-care biosensors.

Enantioselective recognition of esomeprazole with a molecularly imprinted sol-gel-based electrochemical sensor

A simple, selective, and accurate electrochemical chiral sensor based on molecularly imprinted polymer (MIP) has been developed for sensitive and selective detection of esomeprazole (ESOM). For this purpose, the porous MIP sensor was prepared using tetraethyl orthosilicate (TEOS) and cetyltrimethylammonium bromide (CTAB) in the presence of β-cyclodextrin (β-CD) as a chiral recognizing element on a glassy carbon electrode (GCE). The changes in the MIP-layer related to removal and rebinding of the target ESOM were performed via differential pulse voltammetry (DPV) and cyclic voltammetry (CV) by using [Fe(CN)₆]^3-/4- as the redox probe. The structures of the developed sensor surface were characterized by using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). Electrochemical impedance spectroscopy (EIS) was also utilized for a complementary electrochemical characterization. The calibration curve was obtained in the range 1.0 × 10^-14-2.0 × 10^-13 M with a limit of detection (LOD) of 1.9 × 10^-15 M. The developed method has improved the accessibility of binding sites by producing the porous material via hydrolysis/condensation reaction of TEOS in presence of CTAB. The selectivity tests of the developed SiO₂-β-CD@MIP/GCE sensor indicated a high specificity towards ESOM compared with structurally related competitor molecules such as R-omeprazole (R-OM), R-lansoprazole, and S-lansoprazole. The developed sensor was successfully used to determine ESOM in tablets and commercial human serum samples with satisfactory recoveries (100.25 to 100.60%) and precision (RSD 0.46 to 0.66%).

Remediation of pharmaceuticals from contaminated water by molecularly imprinted polymers: a review

The release of pharmaceuticals into the environment induces adverse effects on the metabolism of humans and other living species, calling for advanced remediation methods. Conventional removal methods are often non-selective and cause secondary contamination. These issues may be partly solved by the use of recently-developped adsorbents such as molecularly imprinted polymers. Here we review the synthesis and application of molecularly imprinted polymers for removing pharmaceuticals in water. Molecularly imprinted polymers are synthesized via several multiple-step polymerization methods. Molecularly imprinted polymers are potent adsorbents at the laboratory scale, yet their efficiency is limited by template leakage and polymer quality. Adsorption performance of multi-templated molecularly imprinted polymers depends on the design of wastewater treatment plants, pharmaceutical consumption patterns and the population serviced by these wastewater treatment plants.

Green Aspects in Molecularly Imprinted Polymers by Biomass Waste Utilization

Molecular Imprinting Polymer (MIP) technology is a technique to design artificial receptors with a predetermined selectivity and specificity for a given analyte, which can be used as ideal materials in various application fields. In the last decades, MIP technology has gained much attention from the scientific world as summarized in several reviews with this topic. Furthermore, green synthesis in chemistry is nowadays one of the essential aspects to be taken into consideration in the development of novel products. In accordance with this feature, the MIP community more recently devoted considerable research and development efforts on eco-friendly processes. Among other materials, biomass waste, which is a big environmental problem because most of it is discarded, can represent a potential sustainable alternative source in green synthesis, which can be addressed to the production of high-value carbon-based materials with different applications. This review aims to focus and explore in detail the recent progress in the use of biomass waste for imprinted polymers preparation. Specifically, different types of biomass waste in MIP preparation will be exploited: chitosan, cellulose, activated carbon, carbon dots, cyclodextrins, and waste extracts, describing the approaches used in the synthesis of MIPs combined with biomass waste derivatives.