Morphology and Conformation Analysis of Self-Assembled Triblock Copolymer Melts

Effective Interaction between Homo- and Heteropolymer Block of Poly(n-butyl acrylate)-b-poly(methyl methacrylate-r-styrene) Diblock Copolymers

We investigated the segregation behavior of a molten diblock copolymer, poly(n-butyl acrylate)-b-poly(methyl methacrylate-r-styrene) (PBA-b-P(MMA-r-S)), wherein styrene (S) is incorporated as a comonomer in the second block to modulate the effective interaction between homopolymer and a random copolymer block. The temperature dependence of the effective interaction parameter χeff between n-butyl acrylate (BA) and the average monomer of the MMA-r-S random block was evaluated from small-angle X-ray scattering (SAXS) analysis using the random phase approximation (RPA) approach. The calculated χeff, as a function of the styrene fraction in the random copolymer block, shows a good agreement with the mean-field binary interaction model. This consistency indicates that the effective interaction between component BA and the average monomer of the random copolymer block is smaller than the interactions between pure components (χBA,MMA,χBA,S). The present study suggests that the introduction of a random copolymer block to a block copolymer can effectively reduce the degree of incompatibility of the block copolymer system without altering the constituent species, which may serve as a viable methodology in designing novel thermoplastic elastomers based on triblock or multiblock copolymers.

Small-Angle X-ray Scattering Analysis on the Estimation of Interaction Parameter of Poly(n-butyl acrylate)-b-poly(methyl methacrylate)

The temperature dependence of the Flory-Huggins interaction parameter χ for poly(n-butyl acrylate)-b-poly(methyl methacrylate) (PBA-b-PMMA) was quantified from small-angle X-ray scattering (SAXS) analysis using random phase approximation (RPA) theory. It was found from the χ estimation (χ=0.0103+14.76/T) that the enthalpic contribution, χH, a measure for temperature susceptibility of χ, is 1.7-4.5 folds smaller for PBA-b-PMMA than for the conventional styrene-diene-based block copolymers, which have been widely used for thermoplastic elastomers. This finding suggests that these fully acrylic components can be a desirable chemical pair for constituting terpolymers applied for thermally stable and mechanically resilient elastomers.

Loop and Bridge Conformations of ABA Triblock Comb Copolymers: A Conformational Assessment for Molecular Composites

We computationally investigate the conformational behavior, “bridging” chain, between different the phase-separated domains vs “looping” chain on the same domain, for two chain architectures of ABA triblock copolymers, one with a linear architecture (L-TBC) and the other with comb architecture (C-TBC) at various segregation regimes using dissipative particle dynamics (DPD) simulations. The power-law relation between the bridge fraction (Φ) and the interaction parameter (χ) for C-TBC is found to be Φ∼χ−1.6 in the vicinity of the order-disorder transition (χODT), indicating a drastic conversion from the bridge to the loop conformation. When χ further increases, the bridge-loop conversions slow down to have the power law, Φ∼χ−0.18, approaching the theoretical power law Φ∼χ−1/9 predicted in the strong segregation limit. The conformational assessment conducted in the present study can provide a strategy of designing optimal material and processing conditions for triblock copolymer either with linear or comb architecture to be used for thermoplastic elastomer or molecular nanocomposites.

Coarse-Grained Modeling of Ion-Containing Polymers

Ion-containing polymers have continued to be an important research focus for several decades due to their use as an electrolyte in energy storage and conversion devices. Elucidation of connections between the mesoscopic structure and multiscale dynamics of the ions and solvent remains incompletely understood. Coarse-grained modeling provides an efficient approach for exploring the structural and dynamical properties of these soft materials. The unique physicochemical properties of such polymers are of broad interest. In this review, we summarize the current development and understanding of the structure-property relationship of ion-containing polymers and provide insights into the design of such materials determined from coarse-grained modeling and simulations accompanying significant advances in experimental strategies. We specifically concentrate on three types of ion-containing polymers: proton exchange membranes (PEMs), anion exchange membranes (AEMs), and polymerized ionic liquids (polyILs). We posit that insight into the similarities and differences in these materials will lead to guidance in the rational design of high-performance novel materials with improved properties for various power source technologies.

Influence of pore morphology on the diffusion of water in triblock copolymer membranes

Understanding the transport properties of water in self-assembled block copolymer morphologies is important for furthering the use of such materials as water-purifying membranes. In this study, we used coarse-grained dissipative particle dynamics simulations to clarify the influence of pore morphology on the self-diffusion of water in linear-triblock-copolymer membranes. We considered representative lamellar, cylindrical, and gyroid morphologies and present results for both the global and local diffusivities of water in the pores. Our results suggest that the diffusivity of water in the confined, polymer-coated pores differs from that in the unconfined bulk. Explicitly, in confinement, the mobility of water is reduced by the hydrodynamic friction arising from the hydrophilic blocks coating the pore walls. We demonstrate that in lamella and cylindrical morphologies, the latter effects can be rendered as a universal function of the pore size relative to the brush height of the hydrophilic blocks.

Blood-pool multifunctional nanoparticles formed by temperature-induced phase transition for cancer-targeting therapy and molecular imaging

Multifunctional nanoparticles (NPs) were prepared based on temperature-induced phase transition in a molten mixture of Lipiodol(®), Tween 80, paclitaxel (PTX), and Pluronic F-68, wherein the Lipiodol(®)/Tween 80 mixture is used as a solubilizer for PTX, and Pluronic F-68 is used for the stabilization of the molten mixture. The morphology and size distribution of optimized multifunctional NPs were observed using transmittance electron microscopy (TEM) and a particle size analyzer. In the optical imaging of tumor-bearing mice using a near-infrared fluorescence (NIRF) imaging system, the multifunctional NPs were evaluated in terms of a time-dependent excretion profile, in vivo biodistribution and tumor-targeting capability compared to free fluorescence dye. In addition, the prolonged circulation of multifunctional NPs was confirmed by enhancement of the blood-pool in live animals using a micro-CT imaging system, because iodine-containing Lipiodol(®) has an X-ray enhancement property. Finally, the anti-tumor efficacy of multifunctional NPs was monitored by injecting the multifunctional NPs into the tail veins of tumor-bearing mice. The multifunctional NPs showed excellent tumor targetability and anti-tumor efficacy in tumor-bearing mice, caused by the enhanced permeation and retention (EPR) effect.

Modeling of polyethylene, poly(l-lactide), and CNT composites: a dissipative particle dynamics study

Dissipative particle dynamics (DPD), a mesoscopic simulation approach, is used to investigate the effect of volume fraction of polyethylene (PE) and poly(l-lactide) (PLLA) on the structural property of the immiscible PE/PLLA/carbon nanotube in a system. In this work, the interaction parameter in DPD simulation, related to the Flory-Huggins interaction parameter χ, is estimated by the calculation of mixing energy for each pair of components in molecular dynamics simulation. Volume fraction and mixing methods clearly affect the equilibrated structure. Even if the volume fraction is different, micro-structures are similar when the equilibrated structures are different. Unlike the blend system, where no relationship exists between the micro-structure and the equilibrated structure, in the di-block copolymer system, the micro-structure and equilibrated structure have specific relationships.

Simulations of the gyroid phase in diblock copolymers with the Gaussian disphere model

Pure melts of asymmetric diblock copolymers are studied by means of the off-lattice Gaussian disphere model with Monte-Carlo kinetics. In this model, a diblock copolymer chain is mapped onto two soft repulsive spheres with fluctuating radii of gyration and distance between centers of mass of the spheres. Microscopic input quantities of the model such as the combined probability distribution for the radii of gyration and the distance between the spheres as well as conditional monomer number densities assigned to each block were derived in the previous work of F. Eurich and P. Maass [J. Chem. Phys. 114, 7655 (2001)] within an underlying Gaussian chain model. The polymerization degree of the whole chain as well as those of the individual blocks are freely tunable parameters thus enabling a precise determination of the regions of stability of various phases. The model neglects entanglement effects which are irrelevant for the formation of ordered structures in diblock copolymers and which would otherwise unnecessarily increase the equilibration time of the system. The gyroid phase was reproduced in between the cylindrical and lamellar phases in systems with box sizes being commensurate with the size of the unit cell of the gyroid morphology. The region of stability of the gyroid phase was studied in detail and found to be consistent with the prediction of the mean-field theory. Packing frustration was observed in the form of increased radii of gyration of both blocks of the chains located close to the gyroid nodes.

Effects of compositional asymmetry in phase behavior of ABA triblock copolymer melts from Monte Carlo simulation

We simulate ABA triblock copolymer melts using a lattice Monte Carlo method, known as cooperative motion algorithm, probing various degrees of compositional asymmetry. Selected order-disorder transition lines are determined in terms of the segment incompatibility, quantified by product χN , and the triblock asymmetry parameters, α and β. We correlate the results of the simulation with the self-consistent field theory and an experimental study of polyisoprene-polystyrene-polyisoprene triblock melt by Hamersky and coworkers. In particular, we confirm the mean-field prediction that for highly asymmetric triblocks the short A -block is localized in the middle of the B -domain due to an entropic advantage. This results in the middle block relaxation and is consistent with the experimental data indicating that as the relatively short A -blocks are grown into AB diblock, from the B -block side, the order-disorder transition temperature is considerably depressed.

Paclitaxel-loaded Pluronic nanoparticles formed by a temperature-induced phase transition for cancer therapy

We prepared nanoparticles by a temperature-induced phase transition in a mixture of Pluronic F-68 and liquid PEG (polyethylene glycol, molecular weight: 400) containing paclitaxel (PTX) with a fast, simple, continuous and solvent-free process. The liquid PEG is used as solubilizer of PTX and the polymer for the encapsulation of PTX is composed of Pluronic F-68. At the phase transition temperature, the polymer mixture was changed to the liquid phase, and stirring the liquid 0 °C to form Pluronic nanoparticles. The morphology and size distribution of the prepared Pluronic nanoparticles were observed using FE-SEM and TEM, and a particle size analyzer and cryo-TEM were used to observe the shape of paclitaxel-loaded Pluronic nanoparticles in an aqueous state. To apply Pluronic nanoparticles as a delivery system for cancer therapy, the release pattern of PTX, a model anti-cancer drug, was observed and the tumor growth was monitored by injecting the PTX-loaded Pluronic nanoparticles into the tail veins of tumor-bearing mice. We also evaluated the time-dependent excretion profile, in vivo biodistribution, circulation time, and tumor targeting ability of PTX-loaded Pluronic nanoparticles using non-invasive live animal imaging technology. In the early stage within 7h of release, the loaded PTX was rapidly released and the sustained release was observed for up to 48 h. In vivo studies, PTX-loaded Pluronic nanoparticles were observed with higher anti-tumor efficacy compared with PTX formulated in Cremophor EL.

Molecular simulation study of self-assembly of tethered V-shaped nanoparticles

We use Brownian dynamics to investigate the self-assembly of single end tethered, laterally tethered, and double end tethered V-shaped nanoparticles. The simulation results are compared with model bent-core molecules without tethers and polymer tethered nanorods to elucidate the combined effects of V-shaped geometry and the immiscibility between the V-shaped nanoparticles and the tethers on the self-assembled structures. We show that the V-shaped geometry significantly alters the phase diagram of tethered nanoparticles and further that the immiscibility between particles and tethers leads to structures not previously predicted for bent-core molecules. Examples of mesophases predicted include honeycomb, hexagonally packed cylinders, and perforated lamellar phases.

Modeling of polyethylene and poly (L-lactide) polymer blends and diblock copolymer: Chain length and volume fraction effects on structural arrangement

Dissipative particle dynamics (DPD), a mesoscopic simulation approach, has been used to investigate the chain length effect on the structural property of the immiscible polyethylene (PE)/poly(L-lactide) (PLLA) polymer in a polymer blend and in a system with their diblock copolymer. In this work, the interaction parameter in DPD simulation, related to the Flory-Huggins interaction parameter chi, is estimated by the calculation of mixing energy for each pair of components in molecular dynamics simulation. The immiscibility property of PE and PLLA polymers induces the phase separation and exhibits different architectures at different volume fractions. In order to observe the structural property, the radius of gyration is used to observe the detailed arrangement of the polymer chains. It shows that the structure arrangement of a polymer chain is dependent on the phase structure and has a significantly different structural arrangement character for the very short chains in the homopolymer and copolymers. The chain length effect on the degree of stretching or extension of polymers has also been observed. As the chain length increases, the chain exhibits more stretching behavior at lamellae, perforated lamellae, and cylindrical configurations, whereas the chain exhibits a similar degree of stretching or extension at the cluster configuration.