Monolithic perovskite/organic tandem solar cells: Developments, prospects, and challenges

Interface Engineering for Highly Efficient Organic Solar Cells

Organic solar cells (OSCs) have made dramatic advancements during the past decades owing to the innovative material design and device structure optimization, with power conversion efficiencies surpassing 19% and 20% for single-junction and tandem devices, respectively. Interface engineering, by modifying interface properties between different layers for OSCs, has become a vital part to promote the device efficiency. It is essential to elucidate the intrinsic working mechanism of interface layers, as well as the related physical and chemical processes that manipulate device performance and long-term stability. In this article, the advances in interface engineering aimed to pursue high-performance OSCs are reviewed. The specific functions and corresponding design principles of interface layers are summarized first. Then, the anode interface layer, cathode interface layer in single-junction OSCs, and interconnecting layer of tandem devices are discussed in separate categories, and the interface engineering-related improvements on device efficiency and stability are analyzed. Finally, the challenges and prospects associated with application of interface engineering are discussed with the emphasis on large-area, high-performance, and low-cost device manufacturing.

Proposal and Numerical Analysis of Organic/Sb2Se3 All-Thin-Film Tandem Solar Cell

The low bandgap antimony selenide (Sb₂Se₃) and wide bandgap organic solar cell (OSC) can be considered suitable bottom and top subcells for use in tandem solar cells. Some properties of these complementary candidates are their non-toxicity and cost-affordability. In this current simulation study, a two-terminal organic/Sb₂Se₃ thin-film tandem is proposed and designed through TCAD device simulations. To validate the device simulator platform, two solar cells were selected for tandem design, and their experimental data were chosen for calibrating the models and parameters utilized in the simulations. The initial OSC has an active blend layer, whose optical bandgap is 1.72 eV, while the initial Sb₂Se₃ cell has a bandgap energy of 1.23 eV. The structures of the initial standalone top and bottom cells are ITO/PEDOT:PSS/DR3TSBDT:PC₇₁BM/PFN/Al, and FTO/CdS/Sb₂Se₃/Spiro-OMeTAD/Au, while the recorded efficiencies of these individual cells are about 9.45% and 7.89%, respectively. The selected OSC employs polymer-based carrier transport layers, specifically PEDOT:PSS, an inherently conductive polymer, as an HTL, and PFN, a semiconducting polymer, as an ETL. The simulation is performed on the connected initial cells for two cases. The first case is for inverted (p-i-n)/(p-i-n) cells and the second is for the conventional (n-i-p)/(n-i-p) configuration. Both tandems are investigated in terms of the most important layer materials and parameters. After designing the current matching condition, the tandem PCEs are boosted to 21.52% and 19.14% for the inverted and conventional tandem cells, respectively. All TCAD device simulations are made by employing the Atlas device simulator given an illumination of AM1.5G (100 mW/cm²). This present study can offer design principles and valuable suggestions for eco-friendly solar cells made entirely of thin films, which can achieve flexibility for prospective use in wearable electronics.

Influence of Component Properties on the Photovoltaic Performance of Monolithic Perovskite/Organic Tandem Solar Cells: Sub-Cell, Interconnecting Layer, and Photovoltaic Parameters

Wide-bandgap perovskite sub-cells (WPSCs)-based tandem solar cells attract considerable interest because of their capability to surpass the Shockley-Queisser limit. Monolithic perovskite/organic tandem solar cells (POTSCs) integrating WPSCs and small-bandgap organic sub-cells (SOSCs) are famous compositions owing to their simple fabrication method and compatibility with flexible devices. Most studies on POTSCs focus on enhancing device efficiency by modifying one or two of the device components (WPSCs, SOSCs, and interconnecting layers). The characteristics of POTSCs are not extensively investigated so far, especially in terms of the influence of the device structure and component properties on the tandem device photovoltaic performance. In this study, the existing p-i-n type WPSC-based p-i-n POTSCs and n-i-p type WPSC-based n-i-p POTSCs are reviewed and their advantages and limitations are highlighted. Furthermore, the influence of the tandem device component properties (optical, electrical, and photovoltaic properties) on the photovoltaic parameters (open-circuit voltage, short-circuit current density, fill factor, and power conversion efficiency) and the existing device modification methods are discussed to provide comprehensive guidance for the development of POTSCs.

4-Terminal Inorganic Perovskite/Organic Tandem Solar Cells Offer 22% Efficiency

After fast developing of single-junction perovskite solar cells and organic solar cells in the past 10 years, it is becoming harder and harder to improve their power conversion efficiencies. Tandem solar cells are receiving more and more attention because they have much higher theoretical efficiency than single-junction solar cells. Good device performance has been achieved for perovskite/silicon and perovskite/perovskite tandem solar cells, including 2-terminal and 4-terminal structures. However, very few studies have been done about 4-terminal inorganic perovskite/organic tandem solar cells. In this work, semi-transparent inorganic perovskite solar cells and organic solar cells are used to fabricate 4-terminal inorganic perovskite/organic tandem solar cells, achieving a power conversion efficiency of 21.25% for the tandem cells with spin-coated perovskite layer. By using drop-coating instead of spin-coating to make the inorganic perovskite films, 4-terminal tandem cells with an efficiency of 22.34% are made. The efficiency is higher than the reported 2-terminal and 4-terminal inorganic perovskite/organic tandem solar cells. In addition, equivalent 2-terminal tandem solar cells were fabricated by connecting the sub-cells in series. The stability of organic solar cells under continuous illumination is improved by using semi-transparent perovskite solar cells as filter.

High-Performance 1 cm2 Perovskite-Organic Tandem Solar Cells with a Solvent-Resistant and Thickness-Insensitive Interconnecting Layer

Organic solar cells (OSCs) and perovskite solar cells (PVSCs) are promising candidates for next-generation thin film photovoltaic technologies. The integration of OSCs with PVSCs in tandem devices is now attracting significant attention due to their similar fabrication procedures and the potential to afford a higher device performance. Here, a thickness-insensitive and solvent-resistant interconnecting layer is developed to efficiently connect perovskite and organic subcells with low contact resistance. The resultant perovskite-organic tandem devices maintain high efficiencies over a wide thickness range of the interconnecting layer, from ∼20 nm to ∼50 nm, providing an easily fabricated, solvent-resistant platform to integrate perovskite and organic active layers with low-temperature solution processing techniques. The tandem devices containing an ultrathin PVSC and a typical non-fullerene OSC give a maximum efficiency of 19.2%, which is much higher than those of the single-junction devices. Moreover, highly reproducible 1 cm² perovskite-organic tandem devices are achieved using the thickness-insensitive and solvent-resistant interconnecting layer, and an efficiency of 17.8% is realized. These 1 cm² tandem solar cells are used successfully in solar-to-hydrogen systems to afford a solar-to-fuel conversion efficiency of 11.2%. Overall, these advances represent significant progress in the design of ultrathin and facile solution processed perovskite-organic tandem solar cells.

Molecularly Engineered Interfaces in Metal Halide Perovskite Solar Cells

Perovskite solar cells (PSCs) have emerged as a promising candidate for next-generation thin-film photovoltaic technology owing to their excellent optoelectronic properties and cost-effectiveness. To gain the full potential of device performance, an in-depth understanding of the surface/interface science is an urgent need. Here, we present a review of molecularly engineered studies on interface modifications of PSCs. We elaborate a systematic classification of the existing optimization techniques employed in molecularly engineered perovskite and interface materials and analyze the insights underlying the reliability issues and functional behaviors. The achievements allow us to highlight the crucial strengths of molecular design for further tailoring of the interfacial properties, mitigating the nonradiative losses, optimizing the device performance, and retarding the degradation process of PSCs. Finally, the remaining challenges and potential development directions of molecularly engineered interfaces for high-performance and stable PSCs are also proposed.

Photon management to reduce energy loss in perovskite solar cells

Despite the rapid development of perovskite solar cells (PSCs) over the past few years, the conversion of solar energy into electricity is not efficient enough or cost-competitive yet. The principal energy loss in the conversion of solar energy to electricity fundamentally originates from the non-absorption of low-energy photons ascribed to Shockley-Queisser limits and thermalization losses of high-energy photons. Enhancing the light-harvesting efficiency of the perovskite photoactive layer by developing efficient photo management strategies with functional materials and arrays remains a long-standing challenge. Here, we briefly review the historical research trials and future research trends to overcome the fundamental loss mechanisms in PSCs, including upconversion, downconversion, scattering, tandem/graded structures, texturing, anti-reflection, and luminescent solar concentrators. We will deeply emphasize the availability and analyze the importance of a fine device structure, fluorescence efficiency, material proportion, and integration position for performance improvement. The unique energy level structure arising from the 4fn inner shell configuration of the trivalent rare-earth ions gives multifarious options for efficient light-harvesting by upconversion and downconversion. Tandem or graded PSCs by combining a series of subcells with varying bandgaps seek to rectify the spectral mismatch. Plasmonic nanostructures function as a secondary light source to augment the light-trapping within the perovskite layer and carrier transporting layer, enabling enhanced carrier generation. Texturing the interior using controllable micro/nanoarrays can realize light-matter interactions. Anti-reflective coatings on the top glass cover of the PSCs bring about better transmission and glare reduction. Photon concentration through perovskite-based luminescent solar concentrators offers a path to increase efficiency at reduced cost and plays a role in building-integrated photovoltaics. Distinct from other published reviews, we here systematically and hierarchically present all of the photon management strategies in PSCs by presenting the theoretical possibilities and summarizing the experimental results, expecting to inspire future research in the field of photovoltaics, phototransistors, photoelectrochemical sensors, photocatalysis, and especially light-emitting diodes. We further assess the overall possibilities of the strategies based on ultimate efficiency prospects, material requirements, and developmental outlook.