Successful Synthesis of Gold Nanoparticles through Ultrasonic Spray Pyrolysis from a Gold(III) Nitrate Precursor and Their Interaction with a High Electron Beam

Towards a digital twin of primary drying in lyophilization using coupled 3-D equipment CFD and 1-D vial-scale simulations

A digital twin of lyophilization units was developed to facilitate the scale-up of the lyophilization process from the laboratory to the commercial scale. Our focus was on ensuring successful technology transfer for manufacture of high-quality drug products. Traditionally, lyophilization models have been specific either to the equipment or to the vial. In this study, we integrated the equipment and the vial models in a way that they mutually influenced each other via boundary conditions (two-way coupling). We conducted two sets of calculations. Firstly, we performed steady-state simulations using Computational Fluid Dynamics (CFD) to simulate an ice slab test, which helped determine the equipment capability curve. Secondly, we carried out transient, coupled simulations using a coupled 3-D CFD and 1-D vial scale simulation model to mimic the primary drying phase in a lyophilizer. Using the coupled 3-D CFD and 1-D vial scale model, we were able to determine the product temperature, the sublimation rate and the cycle time based on the temporal and spatial conditions in the lyophilizer. The coupled approach was then applied to capture the effects of process disturbances and failure conditions in the lyophilizer, which enables a more robust process design.

The onset of aerosol Au nanoparticle crystallization: accretion & explosive nucleation

The crystallization of gold nanoparticles is investigated in the gas-phase by molecular dynamics (MD) that is most relevant to their synthesis by aerosol processes (flame, plasma, or cluster beam deposition). A particle size-dependent metastable region, 200-300 °C wide, is revealed between the melting and freezing points of Au. This region decreases as the MD heating or cooling rates decrease. Two separate stages, subcritical and supercritical cluster formation, are distinguished during isothermal crystallization of 2.5-11 nm Au nanoparticles at 500-1000 K. The degree of Au crystallization (face-centered cubic or hexagonal close-packing) is quantified based on the Au atom local crystalline disorder. The onset of crystallization is identified by the steep rise of the fraction of atoms that retain their crystallinity in the largest subcritical cluster, accompanied by a sharp drop of the amorphous fraction of the Au nanoparticle. Crystallization starts from, at least, one atom layer below the surface of the nanoparticle and then quickly expands to its surface and bulk. Two crystallization nucleation pathways are identified: (a) explosive nucleation well below the Au freezing point resulting in many small and broadly distributed crystals; and (b) accretion nucleation near the freezing point where narrowly distributed and larger crystals are formed that grow by accretion and coalescence. X-ray diffraction (XRD) patterns are generated by MD, from which the dynamics of crystal growth are elucidated, consistent with the literature and in excellent agreement with direct tracing of crystal sizes.

A highly sensitive and selective colorimetric aptasensor for detecting sulfadiazine in river waters based on gold nanoparticles synthesized from discarded Longan seed extract

Gold nanoparticles (AuNPs) were extensively employed for in-situ detection sulfadiazine (SDZ) residues, yet current synthesis methods suffer from complex procedures, reagent pollution of the environment, and low particle quality. This study presents a novel synthesis method using discarded longan seed extract as a reducing agent to synthesized high-quality AuNPs, and then can be used for in-situ SDZ detection. Response surface methodology (RSM) was employed to optimize synthesis parameters, which resulted in five optimal combinations that enhanced the flexibility of synthesis. These AuNPs, ranging in size from 18.26 nm to 33.8 nm with zeta potentials from - 29.5 mV to - 14.3 mV, were successfully loaded with functional groups from longan seed extract. In the detection of SDZ, the colorimetric aptasensor demonstrated excellent sensitivity and selectivity over other antibiotics with a limit of detection and quantification at 70.98 ng·mL-1 and 236.59 ng·mL-1 in the concentration range of 200-800 ng·mL-1. Recoveries of spiked SDZ samples ranged from 97.90% to 106.7%, with RSD values below 9.25%. Meanwhile, the aptasensor exhibited exceptional diagnostic efficacy (AUC: 0.976) compared to UV absorption methods in the ROC evaluation. In conclusion, this study highlights the potential of using AuNPs synthesized from longan seed extract coupled with aptamer technology as a straightforward detection method for SDZ in river water, offering promising applications in environmental monitoring.

A comprehensive review of cancer therapies mediated by conjugated gold nanoparticles with nucleic acid

Nucleic acids provide a promising therapeutic platform by targeting various cell signaling pathways involved in cancer and genetic disorders. However, maintaining optimal stability during delivery limits their utility. Nucleic acid delivery vehicles are generally categorized into biological and synthetic carriers. Regardless of the efficiency of biological vectors, such as viral vectors, issues related to their immunogenicity and carcinogenesis are very important and vital for clinical applications. On the other hand, synthetic vectors such as lipids or polymers, have been widely used for nucleic acid delivery. Despite their transfection efficiency, low storage stability, targeting inefficiency, and tracking limitations are among the limitations of the clinical application of these vectors. In the past decades, gold nanoparticles with unique properties have been shown to be highly efficient mineral vectors for overcoming these obstacles. In this review, we focus on gold nanoparticle-nucleic acid combinations and highlight their use in the treatment of various types of cancers. Furthermore, by stating the biological applications of these structures, we will discuss their clinical applications.

Print-Light-Synthesis for Single-Step Metal Nanoparticle Synthesis and Patterned Electrode Production

The fabrication of thin-film electrodes, which contain metal nanoparticles and nanostructures for applications in electrochemical sensing as well as energy conversion and storage, is often based on multi-step procedures that include two main passages: (i) the synthesis and purification of nanomaterials and (ii) the fabrication of thin films by coating electrode supports with these nanomaterials. The patterning and miniaturization of thin film electrodes generally require masks or advanced patterning instrumentation. In recent years, various approaches have been presented to integrate the spatially resolved deposition of metal precursor solutions and the rapid conversion of the precursors into metal nanoparticles. To achieve the latter, high intensity light irradiation has, in particular, become suitable as it enables the photochemical, photocatalytical, and photothermal conversion of the precursors during or slightly after the precursor deposition. The conversion of the metal precursors directly on the target substrates can make the use of capping and stabilizing agents obsolete. This review focuses on hybrid platforms that comprise digital metal precursor ink printing and high intensity light irradiation for inducing metal precursor conversions into patterned metal and alloy nanoparticles. The combination of the two methods has recently been named Print-Light-Synthesis by a group of collaborators and is characterized by its sustainability in terms of low material consumption, low material waste, and reduced synthesis steps. It provides high control of precursor loading and light irradiation, both affecting and improving the fabrication of thin film electrodes.

Effect of nanogold particles addition on dimensional stability of complete denture base material: an in - vitro study

BACKGROUND

The most widely used substance in the fabrication of dental prosthesis is poly (methyl methacrylate), or PMMA, and the development of biofilm is frequently associated with its use. To enhance the mechanical properties of heat-polymerized PMMA, this study prepared PMMA/gold nanoparticles (AuNps). The occlusal vertical dimension and tooth movement were examined in the current study. The occlusal vertical dimension was assessed using an electronic digital calliper measuring device, and tooth movement was measured using a CAD Star digital scanner.

RESULTS

Tooth movement and occlusal vertical dimension of a PMMA/gold nanoparticles (AuNps) were decreased for all groups containing AuNps. Statistical analysis was performed by means of the SPSS 16 software package.

CONCLUSIONS

Incorporation of AuNps into heat- polymerized PMMA resin led to increase dimensional stability of complete denture base material.

Toward the Continuous Production of Multigram Quantities of Highly Uniform Supported Metallic Nanoparticles and Their Application for Synthesis of Superior Intermetallic Pt-Alloy ORR Electrocatalysts

A fast and facile pulse combustion (PC) method that allows for the continuous production of multigram quantities of high-metal-loaded and highly uniform supported metallic nanoparticles (SMNPs) is presented. Namely, various metal on carbon (M/C) composites have been prepared by using only three feedstock components: water, metal-salt, and the supporting material. The present approach can be elegantly utilized also for numerous other applications in electrocatalysis, heterogeneous catalysis, and sensors. In this study, the PC-prepared M/C composites were used as metal precursors for the Pt NPs deposition using double passivation with the galvanic displacement method (DP method). Lastly, by using thin-film rotating disc electrode (TF-RDE) and gas-diffusion electrode (GDE) methodologies, we show that the synergistic effects of combining PC technology with the DP method enable production of superior intermetallic Pt-M electrocatalysts with an improved oxygen reduction reaction (ORR) performance when compared to a commercial Pt-Co electrocatalyst for proton exchange membrane fuel cells (PEMFCs) application.

Recent Advances in Inorganic Nanomaterials Synthesis Using Sonochemistry: A Comprehensive Review on Iron Oxide, Gold and Iron Oxide Coated Gold Nanoparticles

Sonochemistry uses ultrasound to improve or modify chemical reactions. Sonochemistry occurs when the ultrasound causes chemical effects on the reaction system, such as the formation of free radicals, that intensify the reaction. Many studies have investigated the synthesis of nanomaterials by the sonochemical method, but there is still very limited information on the detailed characterization of these physicochemical and morphological nanoparticles. In this comprehensive review, recent advances in the sonochemical synthesis of nanomaterials based on iron oxide nanoparticles (Fe3O4NP), gold nanoparticles (AuNP) and iron oxide-coated gold nanoparticles (Fe3O4@Au NP) are discussed. These materials are the most studied materials for various applications, such as medical and commercial uses. This review will: (1) address the simple processing and observations on the principles of sonochemistry as a starting point for understanding the fundamental mechanisms, (2) summarize and review the most relevant publications and (3) describe the typical shape of the products provided in sonochemistry. All in all, this review's main outcome will provide a comprehensive overview of the available literature knowledge that promotes and encourages future sonochemical work.

Plasmonic Gold Nanoparticles (AuNPs): Properties, Synthesis and their Advanced Energy, Environmental and Biomedical Applications

Inducing plasmonic characteristics, primarily localized surface plasmon resonance (LSPR), in conventional AuNPs through particle size and shape control could lead to a significant enhancement in electrical, electrochemical, and optical properties. Synthetic protocols and versatile fabrication methods play pivotal roles to produced plasmonic gold nanoparticles (AuNPs), which can be employed in multipurpose energy, environmental and biomedical applications. The main focus of this review is to provide a comprehensive and tutorial overview of various synthetic methods to design highly plasmonic AuNPs, along with a brief essay to understand the experimental procedure for each technique. The latter part of the review is dedicated to the most advanced and recent solar-induced energy, environmental and biomedical applications. The synthesis methods are compared to identify the best possible synthetic route, which can be adopted while employing plasmonic AuNPs for a specific application. The tutorial nature of the review would be helpful not only for expert researchers but also for novices in the field of nanomaterial synthesis and utilization of plasmonic nanomaterials in various industries and technologies.

Anisotropic characteristics and improved magnetic performance of Ca-La-Co-substituted strontium hexaferrite nanomagnets

Recent studies on next-generation permanent magnets have focused on filling in the gap between rare-earth magnets and rare-earth-free magnets, taking into account both the cost-effectiveness and magnetic performance of the magnetic materials. As an improved rare-earth-free magnet candidate, here, Ca-substituted M-type Sr-lean hexaferrite particles within a nano- to micro-scale regime, produced using an ultrasonic spray pyrolysis method, are investigated. Theoretically, the maximum coercivity (H_c) can be achieved in submicron Sr-ferrite crystals (i.e., 0.89 μm). The plate-like resultants showed a significant enhancement in H_c, up to a record high of 7880.4 Oe, with no deterioration in magnetization (M: 71–72 emu/g). This resulted in more favorable magnetic properties than those of the traditional Sr–La–Co ferrites. On the basis of microstructural analysis and fitting results based on the law of approach to saturation method, the Ca-substitution effects on the change in size and anisotropic characteristics of the ferrite particles, including pronounced lateral crystal growth and a strong increase in magnetocrystalline anisotropy, are clearly demonstrated. The cost-effective, submicron, and Ca-substituted Sr-ferrite is an excellent potential magnet and moreover may overcome the limitations of traditional hard magnetic materials.

Mechanical properties of new denture base material modified with gold nanoparticles

PURPOSE

Poly(methyl methacrylate) (PMMA) is the most commonly used material in the production of dental prostheses, and its application is often accompanied by the formation of biofilm. The aim of this work was the preparation of a PMMA/gold nanoparticles (AuNps) composite to improve the antimicrobial properties of heat-polymerised PMMA. The AuNPs were synthesised from gold (III) acetate by Ultrasonic Spray Pyrolysis (USP).In the present study, flexural strength and elastic modulus were investigated, as well as thermal conductivity, density and hardness of the PMMA/AuNps` nanocomposite, with different concentrations of AuNps. Flexural strength and elastic modulus were measured using a three-point bending test, and surface hardness was evaluated using the Vickers hardness test. The thermal conductivity of the samples was measured using the Transient Plane Source (TPS) technique. Density was determined by the pycnometry procedure. Statistical analysis was conducted on the data obtained from the experiments.

RESULTS

The flexural strength and elastic modulus of AuNps/PMMA nanocomposites decreased for all groups containing AuNps. Thermal conductivity and density increased in all groups containing AuNps compared to the control group, but it was not significant in all groups. Vickers hardness values increased significantly with an increase in AuNps` content, with the highest value 21.45 HV obtained at 0.74 wt% of AuNps. Statistical analysis was performed by means of the SPSS 19 software package.

CONCLUSIONS

Incorporation of AuNps into heat-polymerised PMMA resin led to decrease of the flexural strength and elastic modulus. At the same time, the density, thermal conductivity and hardness increased.

Advances in Ultrasonic Spray Pyrolysis Processing of Noble Metal Nanoparticles-Review

In the field of synthesis and processing of noble metal nanoparticles, the study of the bottom-up method, called Ultrasonic Spray Pyrolysis (USP), is becoming increasingly important. This review analyses briefly the features of USP, to underline the physical, chemical and technological characteristics for producing nanoparticles and nanoparticle composites with Au and Ag. The main aim is to understand USP parameters, which are responsible for nanoparticle formation. There are two nanoparticle formation mechanisms in USP: Droplet-To-Particle (DTP) and Gas-To-Particle (GTP). This review shows how the USP process is able to produce Au, Ag/TiO2, Au/TiO2, Au/Fe2O3 and Ag/(Y0.95 Eu0.05)2O3 nanoparticles, and presents the mechanisms of formation for a particular type of nanoparticle. Namely, the presented Au and Ag nanoparticles are intended for use in nanomedicine, sensing applications, electrochemical devices and catalysis, in order to benefit from their properties, which cannot be achieved with identical bulk materials. The development of new noble metal nanoparticles with USP is a constant goal in Nanotechnology, with the objective to obtain increasingly predictable final properties of nanoparticles.

The Effect of Stabilisation Agents on the Immunomodulatory Properties of Gold Nanoparticles Obtained by Ultrasonic Spray Pyrolysis

Gold nanoparticles (GNPs) have been investigated extensively as drug carriers in tumour immunotherapy in combination with photothermal therapy. For this purpose, GNPs should be stabilised in biological fluids. The goal of this study was to examine how stabilisation agents influence cytotoxicity and immune response in vitro. Spherical GNPs, 20 nm in size, were prepared by ultrasonic spray pyrolysis (USP). Three types of stabilising agents were used: sodium citrate (SC), polyvinyl-pyrrolidone (PVP), and poly-ethylene glycol (PEG). Pristine, non-stabilised GNPs were used as a control. The culture models were mouse L929 cells, B16F10 melanoma cells and human peripheral blood mononuclear cells (PBMNCs), obtained from healthy donors. Control SC- and PEG-GNPs were non-cytotoxic at concentrations (range 1–100 µg/mL), in contrast to PVP-GNPs, which were cytotoxic at higher concentrations. Control GNPs inhibited the production of IFN-ϒ slightly, and augmented the production of IL-10 by PHA-stimulated PBMNC cultures. PEG-GNPs inhibited the production of pro-inflammatory cytokines (IL-1, IL-6, IL-8, TNF-α) and Th1-related cytokines (IFN-ϒ and IL-12p70), and increased the production of Th2 cytokines (IL-4 and IL-5). SC-PEG inhibited the production of IL-8 and IL-17A. In contrast, PVP-GNPs stimulated the production of pro-inflammatory cytokines, Th1 cytokines, and IL-17A, but also IL-10. When uptake of GNPs by monocytes/macrophages in PBMNC cultures was analysed, the ingestion of PEG- GNPs was significantly lower compared to SC- and PVP-GNPs. In conclusion, stabilisation agents modulate biocompatibility and immune response significantly, so their adequate choice for preparation of GNPs is an important factor when considering the use of GNPs for application in vivo.

Synthesis of Colloidal Au Nanoparticles through Ultrasonic Spray Pyrolysis and Their Use in the Preparation of Polyacrylate-AuNPs' Composites

Colloidal gold nanoparticles (AuNPs) were prepared from two different liquid precursors (gold (III) acetate and gold (III) chloride), using the Ultrasonic Spray Pyrolysis (USP) process. The STEM characterisation showed that the AuNPs from gold chloride are spherical, with average diameters of 57.2 and 69.4 nm, while the AuNPs from gold acetate are ellipsoidal, with average diameters of 84.2 and 134.3 nm, according to Dynamic Light Scattering (DLS) measurements. UV/VIS spectroscopy revealed the maximum absorbance band of AuNPs between 532 and 560 nm, which indicates a stable state. Colloidal AuNPs were used as starting material and were mixed together with acrylic acid (AA) and acrylamide (Am) for the free radical polymerization of polyacrylate-AuNPs’ composites, with the purpose of using them for temporary cavity fillings in the dental industry. SEM characterisation of polyacrylate-AuNPs’ composites revealed a uniform distribution of AuNPs through the polymer matrix, revealing that the AuNPs remained stable during the polymerization process. The density measurements revealed that colloidal AuNPs increase the densities of the prepared polyacrylate-AuNPs’ composites; the densities were increased up to 40% in comparison with the densities of the control samples. A compressive test showed that polyacrylate-AuNPs’ composites exhibited lower compressive strength compared to the control samples, while their toughness increased. At 50% compression deformation some of the samples fracture, suggesting that incorporation of colloidal AuNPs do not improve their compressive strength, but increase their toughness significantly. This increased toughness is the measured property which makes prepared polyacrylate-AuNPs potentially useful in dentistry.

Effect of Particle Size on the Corrosion Behaviour of Gold in the Presence of Chloride Impurities: An EFC-ICP-MS Potentiodynamic Study

A profound understanding of the Au dissolution process is a prerequisite for optimal utilization of Au-based materials. This goes for either increasing the corrosion stability of materials in the sectors where the long-term functionality of Au is needed or decreasing the corrosion stability where the recovery of the Au component is crucial. By employing an extremely sensitive online analytical system, consisting of an electrochemical flow cell coupled to an inductively coupled plasma mass spectrometry, in situ potential-resolved dissolution of Au in the ppb range is enabled. A comparative study of two Au based materials, (i) a polycrystalline Au disk and (ii) carbon-supported Au nanoparticles, is presented. As a probe, chloride ions were used to elucidate the distinct differences in the corrosion behavior of the two analogues.