Importance of the Initial Oxidation State of Copper for the Catalytic Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Hydrogenation of Carboxylic Acids, Esters, and Related Compounds over Heterogeneous Catalysts: A Step toward Sustainable and Carbon-Neutral Processes

The catalytic hydrogenation of esters and carboxylic acids represents a fundamental and important class of organic transformations, which is widely applied in energy, environmental, agricultural, and pharmaceutical industries. Due to the low reactivity of the carbonyl group in carboxylic acids and esters, this type of reaction is, however, rather challenging. Hence, specifically active catalysts are required to achieve a satisfactory yield. Nevertheless, in recent years, remarkable progress has been made on the development of catalysts for this type of reaction, especially heterogeneous catalysts, which are generally dominating in industry. Here in this review, we discuss the recent breakthroughs as well as milestone achievements for the hydrogenation of industrially important carboxylic acids and esters utilizing heterogeneous catalysts. In addition, related catalytic hydrogenations that are considered of importance for the development of cleaner energy technologies and a circular chemical industry will be discussed in detail. Special attention is paid to the insights into the structure-activity relationship, which will help the readers to develop rational design strategies for the synthesis of more efficient heterogeneous catalysts.

Fullerenes make copper catalysis better

Ethylene glycol can be reliably produced by mild hydrogenation of dimethyl oxalate.

Copper Phyllosilicates-Derived Catalysts in the Production of Alcohols from Hydrogenation of Carboxylates, Carboxylic Acids, Carbonates, Formyls, and CO2: A Review

Copper phyllosilicates-derived catalysts (CuPS-cats) have been intensively explored in the past two decades due to their promising activity in carbonyls hydrogenation. However, CuPS-cats have not been completely reviewed. This paper focuses on the aspects concerning CuPS-cats from synthesis methods, effects of preparation conditions, and dopant to catalytic applications of CuPS-cats. The applications of CuPS-cats include the hydrogenation of carboxylates, carboxylic acids, carbonates, formyls, and CO2 to their respective alcohols. Besides, important factors such as the Cu dispersion, Cu+ and Cu0 surface areas, particles size, interaction between Cu and supports and dopants, morphologies, and spatial effect on catalytic performance of CuPS-cats are discussed. The deactivation and remedial actions to improve the stability of CuPS-cats are summarized. It ends up with the challenges and prospective by using this type of catalyst.

Desorption-dominated synthesis of CuO/SBA-15 with tunable particle size and loading in supercritical CO2

Here, we present a novel method to control the size of CuO nanoparticles (NPs) and Cu loading in SBA-15 via fast desorption of supercritical CO₂ (scCO₂). After calcination, the average size of the CuO NPs (6.47 ± 2.89∼2.18 ± 0.97 nm) decreased with the increase of the depressurization rate (20-14 MPa, 50 °C) from transmission electron microscopy, and the x-ray diffraction results also indicated the decrement of the average particle size (8.6∼4.3 nm by a Scherrer equation). Two reduction peaks situated at 195 °C and 220 °C were found from the temperature-programmed reductions with H₂ profiles, and the intensity of the low-temperature peak increased with increasing the rate for a profile. The hydrogenation of dimethyl oxalate (DMO) to ethylene glycol (EG) was selected to evaluate the catalytic activity of the as-prepared sample. The reaction was conducted at p = 3.0 MPa, T = 200 °C, H₂/DMO = 120, the weight hourly space velocity  = 1.2 h^-1, and the EG selectivity remained at about 90% for over 100 h. The fast desorption of scCO₂ caused mechanical perturbations and crystallization of the adsorbed salt ions on the supports, decreasing the particle size and increasing Cu loading (8∼12 wt%).

Bifunctional rhenium–copper nanostructures for intensified and stable ethanol synthesis via hydrogenation of dimethyl oxalate

Small copper nanoparticles decorated with isolated and clustered oxophilic rhenium species are designed for intensified ethanol production through hydrogenation of dimethyl oxalate with unprecedented stability performance.

Importance of the Initial Oxidation State of Copper for the Catalytic Hydrogenation of Dimethyl Oxalate to Ethylene Glycol

Exposing a Cu‐based catalyst to a suitable temperature is of great importance to optimize its hydrogenation performance, as copper is sensitive to temperature. Herein, we investigated the effect of the initial oxidation state of copper, tuned by the reduction temperature, on its catalytic performance in the hydrogenation of dimethyl oxalate (DMO) to ethylene glycol (EG) through designing a series of catalysts with different reduction temperatures (200–350 °C). Among these catalysts, the Cu/SiO₂ catalyst prepared by ammonia evaporation with a hydrogen reduction process at 250 °C showed the best performance in the hydrogenation of DMO with a conversion of 100 % and a selectivity to EG higher than 95 %. The relationship between the initial oxidation state of copper and catalytic performance was well established by characterizing the physicochemical properties of the Cu/SiO₂ catalysts by XRD, TEM, H₂ temperature‐programmed reduction, N₂O adsorption, and in situ reduction Auger electron spectroscopy. The initial oxidation state of copper determined the conversion of DMO and the distribution of the products, and it could be balanced by reducing the temperature to improve the activity of the catalyst. This work provides a reference for further exploration of the mechanism and guidance for the design of catalysts for the hydrogenation of esters.