Properties of bacterial cellulose transparent film regenerated from dimethylacetamide-LiCl solution

Production of bacterial cellulose with high active components loading capacity for skin wound repair

Scutellaria baicalensis extracts (SBACs), a herb that contains a variety of bioactive flavonoids like baicalein and baicalin, which impart antibacterial, antioxidant, and other biological activities, were used to create bacterial cellulose (BC) with a high components-loading capacity in-situ. Higher S-L ratios raised the quantities of the active ingredients (baicalin and baicalein), enhancing antibacterial and antioxidant activities. Considering both components-loading efficiency (322 mg/g of baicalin and 8.79 mg/g of baicalein) and production viability, an S-L ratio of 1:20 was determined as the optimal for preparing BC/SBACs membranes. These membranes exhibited superior mechanical strength and thermal stability compared to pure BC. Furthermore, when compared to membranes made via physical adsorption, the in-situ produced BC/SBACs exhibited a higher capacity for loading components and a more effective release of those components. A three-dimensional network structure was discovered using morphological analysis, which facilitated the integration of active ingredients. In vitro biocompatibility tests showed that BC/SBACs hydrogel was safe, exhibiting no hemolysis and low cytotoxicity. In vivo experiments on a full-thickness skin defect model in mice demonstrated a significantly higher wound-healing rate. The study highlights the potential of BC to improve clinical treatment outcomes by providing an easy way to combine it with traditional Chinese medicine.

Low-Alpha-Cellulose-Based Membranes

Depending on the method of cellulose production, the proportion of alpha fraction in it can vary significantly. Paper pulp, unlike dissolving cellulose, has an alpha proportion of less than 90%. The presence of cellulose satellites in the system does not impede the formation of concentrated solutions of N-methylmorpholine-N-oxide (NMMO). In the current study, spinning solutions based on cellulose with a low alpha fraction (up to 90%) (pulp cellulose) are investigated. The morphological features and rheological behavior of such solutions are examined. It is suggested to roll the obtained solutions in order to obtain cellulose membranes. X-ray diffraction, IR spectroscopy, AFM and SEM were used to investigate the resulting structure and morphology of the obtained membranes. It is shown that the degree of crystallinity for the membranes varies based on the impurity content in the sample. The morphology of the films is characterized by a dense texture and the absence of vacuoles. The highest strength and elastic modulus were found for membranes made of bleached hardwood sulfate cellulose, 5.7 MPa and 6.4 GPa, respectively. The maximum values of the contact angle (48°) were found for films with a higher proportion of lignin. The presence of lignin in the membranes leads to an increase in rejection for the anionic dyes Orange II and Remazol Brilliant Blue R.

Optimizing the Production of Bacterial Cellulose Nanofibers and Nanocrystals Through Strategic Fiber Pretreatment

Bacterial cellulose (BC) has unique properties such as high tensile strength, high crystallinity, and high purity. The fiber length of BC causes different attributes. Therefore, the degradation of BC has been studied extensively. In this study, the fibers of BC were rearranged via a DMAc-LiCl solvent and BC was degraded in the wet state. Two different degradation methods were applied: milling with liquid nitrogen and autoclave treatment. The degraded BCs were characterized by FTIR, TEM, AFM, TGA, and XRD. The solvent helps to align the fibers, making them more crystalline. The degraded BCs had a lower crystalline ratio than untreated BC, due to increased hydrogen bonding during degradation in the wet state. Degradation with an autoclave produced two different degraded BCs: nanofibrils and spherical nanocrystals, with and without solvent pretreatment, respectively. The nanofibril lengths were between 312 and 700 nm depending on the applied method, and the spherical nanocrystal size was 56 nm. The rearrangement via solvent causes an important difference in the degradation of BC. Nanofibrils and nanocrystals can be obtained, depending on the rearrangement of fibers before the degradation process.

Dissolution of denim waste in N-methyl morpholine-N-oxide monohydrate for fabrication of regenerated cellulosic film: Experimental and simulation study

Despite the significant amount of denim waste and its potential as a cellulose source, its use has been neglected. This study uses N-methyl morpholine-N-oxide, an eco-friendly solvent, to dissolve denim (including 100 % cotton) and create a denim film. Achieving a 10 % denim record solubility, a cellulosic film was also fabricated for comparison. Characterisation techniques were applied, and molecular dynamics simulations explored intramolecular interactions and the influence of indigo dye on dissolution process. FTIR spectra indicated no chemical reactions during dissolution and regeneration, though a shift in OH stretching suggested a change in crystallinity, confirmed by XRD results showing decreased crystallinity and a structural shift from cellulose I to cellulose II. 13C NMR analysis revealed disruptions in interchain hydrogen bonds after regeneration. TGA results showed lower decomposition temperatures for both films compared to the powders. Testing mechanical properties showed the denim film had higher elongation at break but lower tensile strength than the cellulose film. MD simulations indicated indigo dye did not significantly affect fundamental interactions but decreased denim solubility by reducing the diffusion coefficient. Rheological tests supported the simulation results, showing higher viscosity and molecular weight for the denim solution compared to cellulose.

Preparation of Lyocell Fibers from Solutions of Miscanthus Cellulose

Both annual (cotton, flax, hemp, etc.) and perennial (trees and grasses) plants can serve as a source of cellulose for fiber production. In recent years, the perennial herbaceous plant miscanthus has attracted particular interest as a popular industrial plant with enormous potential. This industrial crop, which contains up to 57% cellulose, serves as a raw material in the chemical and biotechnology sectors. This study proposes for the first time the utilization of miscanthus, namely Miscanthus Giganteus "KAMIS", to generate spinning solutions in N-methylmorpholine-N-oxide. Miscanthus cellulose's properties were identified using standard methods for determining the constituent composition, including also IR and atomic emission spectroscopy. The dry-jet wet method was used to make fibers from cellulose solutions with an appropriate viscosity/elasticity ratio. The structural characteristics of the fibers were studied using IR and scanning electron microscopy, as well as via X-ray structural analysis. The mechanical and thermal properties of the novel type of hydrated cellulose fibers demonstrated the possibility of producing high-quality fibers from miscanthus.

Development of Cellulose Microfibers from Mixed Solutions of PAN-Cellulose in N-Methylmorpholine-N-Oxide

Mixed solutions of PAN with cellulose in N-methylmorpholine-N-oxide (NMMO) were prepared. Systems with a fraction of a dispersed phase of a cellulose solution in NMMO up to 40% are characterized by the formation of fibrillar morphology. The fibrils created as the mixed solution is forced through the capillary take on a more regular order as the cellulose content in the system drops. The systems' morphology is considered to range from a heterogeneous two-phase solution to regular fibrils. The generated morphology, in which the cellulose fibrils are encircled by the PAN, can be fixed by spinning fibers. Cellulose fibrils have a diameter of no more than a few microns. The length of the fibrils is limited by the size of the fiber being formed. The process of selectively removing PAN was used to isolate the cellulose microfibrils. Several techniques were used to evaluate the mechanical properties of isolated cellulose microfibers. Atomic force microscopy allowed for the evaluation of the fiber stiffness and the creation of topographic maps of the fibers. Cellulose microfibers have a higher Young's modulus (more than 30 GPa) than cellulose fibers formed in a comparable method, which affects the mechanical properties of composite fibers.

Preparation of bacterial cellulose-based antibacterial membranes with prolonged release of drugs: Emphasis on the chemical structure of drugs

Bacterial cellulose (BC) based antibacterial membranes were synthesized, including BC-cefoperazone (BC-CEF) and BC-cefoperazone sodium (BC-CEF/Na). To examine the various drug loading processes, the structure, morphology, and physical-chemical characteristics of membranes were evaluated. Results demonstrated that both types of medicines were successfully absorbed into membranes, and membranes displayed identical morphology and FT-IR peaks. BC-CEF showed lower crystalline of XRD, which was likely caused by the combination of carboxyl and hydroxyl. However, there were no drug peaks seen in the membranes, indicating no alteration of ribbon crystallization of BC. Two types of antibacterial membranes have significantly distinct drug-loading traits and drug-releasing profiles. The drug loading rate of CEF (46.4 mg/g) was significantly greater than CEF/Na (30.3 mg/g). The cumulative drug-releasing profiles showed that only BC-CEF continues to release drugs for a lengthy period up to 48 h and exhibited good antimicrobial activity against S. aureus and E. coli until 48 h. The cytotoxicity assay demonstrated the great biocompatibility of all membranes. Findings indicated that BC-CEF has the potential use as a prolonged biocide in the biomedical. The idea that BC membranes can naturally incorporate the carboxyl groups from antibiotics is also innovative and can be useful in developing of drug delivery systems.

Bacterial cellulose: A promising biopolymer with interesting properties and applications

The ever-increasing demands for materials with desirable properties led to the development of materials that impose unfavorable influences on the environment and the ecosystem. Developing a low-cost, durable, and eco-friendly functional material with biological origins has become necessary to avoid these consequences. Bacterial cellulose generated by bacteria dispenses excellent structural and functional properties and satisfies these requirements. BC and BC-derived materials are essential in developing pure and environmentally safe functional materials. This review offers a detailed understanding of the biosynthesis of BC, properties, various functionalization methods, and applicability in biomedical, water treatment, food storage, energy conversion, and energy storage applications.

Flax Noils as a Source of Cellulose for the Production of Lyocell Fibers

The production of long flax fiber for the subsequent production of textile yarn is accompanied by the formation of a significant amount of waste—noils, which is a mechanical mixture of long and short flax fibers and shives. Comparative studies of the structure and chemical composition of the fibrous fraction of noils and shives were carried out using IR spectroscopy. The solubility of shives and flax noils in N-methylmorpholine-N-oxide (NMMO) was studied, a comparative analysis of the rheological behavior of solutions of flax and wood cellulose was carried out and the optimal temperature–concentration conditions for obtaining flax fibers from noils were determined. It was shown for the first time that using the method of solid-phase activation of the cellulose-solvent system makes it possible to obtain fibers in a short period of time (no more than 10 min). The structure of both the raw material and the resulting fibers was studied by X-ray diffraction analysis. The thermal properties of a new type of cellulose fibers was evaluated. The complex of the conducted studies allows us to consider flax fibers from noils along with flax fibers from long-staple flax, as a real alternative to fibers from wood pulp.

Fabrication of Cellulose-Based Biopolymer Optical Fibers and Their Theoretical Attenuation Limit

Currently, almost all polymer optical materials are derived from fossil resources with known consequences for the environment. In this work, a processing route to obtain cellulose-based biopolymer optical fibers is presented. For this purpose, the optical properties such as the transmission and the refractive index dispersion of regenerated cellulose, cellulose diacetate, cellulose acetate propionate, and cellulose acetate butyrate were determined from planar films. Cellulose fibers were produced using a simple wet-spinning setup. They were examined pure and also coated with the cellulose derivatives to obtain core-cladding-structured optical fibers. The cellulose-based optical fibers exhibit minimum attenuations between 56 and 82 dB m^-1 at around 860 nm. The ultimate transmission loss limit of the cellulose-based optical fibers was simulated to characterize the attenuation progression. By reducing extrinsic losses, cellulose-based biopolymer optical fibers could attain theoretical attenuation minima of 84.6 × 10^-3 dB m^-1 (507 nm), 320 × 10^-3 dB m^-1 (674 nm), and 745.2 × 10^-3 dB m^-1 (837 nm) and might substitute fossil-based polymer optical fibers in the future.

Preparation and characterization of nanofibrous cellulose as solid polymer electrolyte for lithium-ion battery applications

A novel bacterial cellulose (BC)-based nanofiber material has been utilized as an ionic template for the battery system solid polymer electrolyte (SPE). The effect of drying techniques such as oven and freeze-drying on the gel-like material indicate differences in both visual and porous structures. The morphological structure of BC after oven and freeze-drying observed by field-emission scanning electron microscopy indicates that a more compact porous structure is found in freeze-dried BC than oven-dried BC. After the BC-based nanofiber immersion process into lithium hexafluorophosphate solution (1.0 M), the porous structure becomes a host for Li-ions, demonstrated by significant interactions between Li-ions from the salt and the C[double bond, length as m-dash]O groups of freeze-dried BC as shown in the infrared spectra. X-ray diffraction analysis of freeze-dried BC after immersion in electrolyte solution shows a lower degree of crystallinity, thus allowing an increase in Li-ion movement. As a result, freeze-dried BC has a better ionic conductivity of 2.71 × 10-2 S cm-1 than oven-dried BC, 6.00 × 10-3 S cm-1. Freeze-dried BC as SPE also shows a larger electrochemical stability window around 3.5 V, reversible oxidation/reduction peaks at 3.29/3.64 V, and an initial capacity of 18 mAHr g-1 at 0.2C. The high tensile strength of the freeze-dried BC membrane of 334 MPa with thermal stability up to 250 °C indicates the potential usage of freeze-dried BC as flexible SPE to dampen ionic leakage transfer.

Films of Bacterial Cellulose Prepared from Solutions in N-Methylmorpholine-N-Oxide: Structure and Properties

In the present study, one of the possible methods of the bacterial cellulose processing is proposed via its dissolution in N-methylmorpholine-N-oxide using the stage of mechano-chemical activation of the solid polymer–solvent system. Preliminary solid-phase activation is apparently a decisive factor affecting the dissolution rate of bacterial cellulose in N-methylmorpholine-N-oxide. The effects of bacterial cellulose concentration, solvent nature, degree of polymerization and temperature on dissolution time were studied. The rheological behavior of the solutions does not change at 120 °C for at least half an hour that allowed us to process such solutions for films preparation. The films from these solutions by means of dry-wet jet spinning in aqueous coagulant were formed. The structure of the nascent cellulose and formed films was tested by the X-ray diffraction method and SEM. The thermal behavior of the films revealed an increase in the carbon yield for the formed films compared to the nascent bacterial cellulose. The process of film pyrolysis is accompanied by exothermic effects, which are not typical for wood cellulose. Some reasons of such thermal behavior are considered.

Functionalized Bacterial Cellulose Microparticles for Drug Delivery in Biomedical Applications

Background:

Bacterial cellulose (BC) has recently attained greater interest in various research fields, including drug delivery for biomedical applications. BC has been studied in the field of drug delivery, such as tablet coating, controlled release systems and prodrug design.

Objective:

In the current work, we tested the feasibility of BC as a drug carrier in microparticulate form for potential pharmaceutical and biomedical applications.

Method :

For this purpose, drug-loaded BC microparticles were prepared by simple grinding and injection moulding method through regeneration. Model drugs, i.e., cloxacillin (CLX) and cefuroxime (CEF) sodium salts were loaded in these microparticles to assess their drug loading and release properties. The prepared microparticles were evaluated in terms of particle shapes, drug loading efficiency, physical state of the loaded drug, drug release behaviour and antibacterial properties.

Results:

The BC microparticles were converted to partially amorphous state after regeneration. Moreover, the loaded drug was transformed into the amorphous state. The results of scanning electron microscopy (SEM) showed that microparticles had almost spherical shape with a size of ca. 350-400 μm. The microparticles treated with higher drug concentration (3%) exhibited higher drug loading. Keeping drug concertation constant, i.e., 1%, the regenerated BC (RBC) microparticles showed higher drug loading (i.e., 37.57±0.22% for CEF and 33.36±3.03% for CLX) as compared to as-synthesized BC (ABC) microparticles (i.e., 9.46±1.30% for CEF and 9.84±1.26% for CLX). All formulations showed immediate drug release, wherein more than 85% drug was released in the initial 30 min. Moreover, such microparticles exhibited good antibacterial activity with larger zones of inhibition for drug loaded RBC microparticles as compared to corresponding ABC microparticles.

Conclusion :

Drug loaded BC microparticles with immediate release behaviour and antibacterial activity were fabricated. Such functionalized microparticles may find potential biomedical and pharmaceutical applications.

Evolution of Dielectric Behavior of Regenerated Cellulose Film during Isothermal Dehydration Monitored in Real Time via Dielectric Spectroscopy

The dielectric relaxation behavior of a regenerated cellulose (RC) film during isothermal dehydration was monitored in real time via dielectric spectroscopy, in order to investigate on one hand the influence of water on its dynamics and the variation of microstructure and phase composition during dehydration on the other. The progression of water loss is clearly revealed by the evolution of the dielectric relaxation behavior with drying time, which suggests two distinctly different drying stages separated by a striking transition period. The dielectric relaxation behavior at the first drying stage is found overwhelmingly dominated by ionic motion, and that at the second stage is basically a result of molecular dynamics. The mechanisms of these relaxations are proposed, through which the influence of water on the dynamics of the RC film and the variation of the microstructure and phase composition of the film at different hydration state are discussed in detail. An interesting finding is that highly ordered but noncrystalline arrangement of cellulose molecules exists, but it can be formed only when the film is in specific hydration state. This study demonstrates that dielectric spectroscopy is an effective tool in real-time monitoring kinetic process.

Preparation and Characterization of Regenerated Cellulose Film from a Solution in Lithium Bromide Molten Salt Hydrate

In this study, the molten salt hydrate of lithium bromide (LiBr) was utilized as a non-derivatizing cellulose dissolution solvent to prepare regenerated cellulose films for kraft pulp. The effects of LiBr concentrations (60, 62, and 65 wt %) and dissolving time (from 5 to 40 min with the interval of 5 min) on the structures and the properties of the films were investigated. Fourier transform infrared (FT-IR) and cross-polarization magic-angle spinning carbon-13 nuclear magnetic resonance (CP/MAS 13C NMR) characterizations verified the breakage of inter- and intra-cellulose hydrogen bonds during the regeneration, resulting in the disruption of the crystalline structure of cellulose. X-ray diffraction (XRD) data indicated that the regeneration converted the polymorphism of cellulose from I to II as well as decreased its crystallinity. Ultraviolet-visible spectra (UV-Vis) and scanning electron microscopy (SEM) analyses revealed the excellent optical transparency of the films to visible light due to the complete dissolution of cellulose fibers as well as the sufficient breaking of the inter- and intra-cellulose hydrogen bonds. In terms of tensile testing, tuning LiBr concentrations and dissolving time could increase the elongation at break and tensile strength of the films. The maximum elongation at break of 26% and tensile strength of 67 MPa were achieved when the films prepared in 65 wt % LiBr for 10 and 15 min, respectively. These results indicated the great potential of the cellulose films for packaging use.