An Optimised Method for Routine Separation and Quantification of Major Alkaloids in Cortex Cinchona by HPLC Coupled with UV and Fluorescence Detection

Electrochemical Behavior of Some Cinchona Alkaloids Using Screen-Printed Electrodes

An effective deposition of a cinchonine layer on a platinum metal surface can be easily achieved through the cathodic reduction of a cinchonine hydrochloride methanolic solution at a controlled potential of -220 mV vs. the silver standard electrode (SSE). A coated screen-printed platinum electrode has proven to be suitable for cinchonine determination in water, urine, and serum at µg L-1 concentration levels using differential pulse voltammetry in a phosphate buffer solution (pH 7.0). The limits of detection (LOD) and quantitation (LOQ) were 0.6 µg L-1 and 1.8 µg L-1, respectively.

Antiviral Activity of Cinchona officinalis, a Homeopathic Medicine, against COVID-19

BACKGROUND

Coronavirus disease 2019 (COVID-19) is a potentially fatal disease caused by the novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Several studies have shown that hydroxychloroquine (HCQ) significantly inhibits SARS-CoV-2 infections in vitro.

OBJECTIVE

Since the phytoconstituents of Cinchona officinalis (CO) are similar to those of HCQ, the objective of this study was to test the antiviral potential of different homeopathic formulations of CO.

METHODS

An analysis of the molecular composition of CO was carried out using ultra-high performance liquid chromatography-quadrupole time-of-flight mass spectrometry, followed by a detailed docking study. The constituents of CO were docked against various targets of SARS-CoV-2, and the binding potential of the phytoconstituents was compared and quantified. The ligand with the lowest Glide docking score is considered to have the best binding affinity. The cytotoxicity of several homeopathic formulations, including CO mother tincture (CO-MT), was also checked on VeroE6 cells. A known antiviral, remdesivir, was used as a positive control for the in vitro assays to evaluate the effects of CO-MT against SARS-CoV-2-infected VeroE6 cells.

RESULTS

Molecular docking studies showed that constituents of CO exhibited binding potential to various targets of SARS-CoV-2, including Mpro, PLpro, RdRp, nucleocapsid protein, ACE2 (in host) and spike protein. Quinoline, one of the constituents of CO, can potentially bind the spike protein of SARS-CoV-2. Quinic acid showed better binding capabilities with Mpro, PLpro RdRp, nucleocapsid protein and ACE2 (allosteric site) than other constituents. Quinidine exhibited better binding to ACE2. Compared to HCQ, other phytoconstituents of CO had the equivalent potential to bind the RNA-dependent RNA polymerase, nucleocapsid protein, Mpro, PLpro and spike protein of SARS-CoV-2. In vitro assays showed that homeopathic CO-MT was not cytotoxic and that CO-MT and remdesivir respectively caused 89% and 99% inhibition of SARS-CoV-2 infection in VeroE6 cells.

CONCLUSION

Based on this in silico and in vitro evidence, we propose CO-MT as a promising antiviral medicine candidate for treating COVID-19. In vivo investigation is required to clarify the therapeutic potential of CO-MT in COVID-19.

Polysaccharide-based chiral stationary phases as efficient tools for diastereo- and enantioseparation of natural and synthetic Cinchona alkaloid analogs

In this study, we present results obtained on the diastereo- and enantioseparation of some basic natural and synthetic Cinchona alkaloid analogs by applying liquid chromatographic (LC) and subcritical fluid chromatographic (SFC) modalities on amylose and cellulose tris-(phenylcarbamate)-based stationary phases using n-hexane/alcohol/DEA or CO₂/alcohol/DEA mobile phase systems. Seven chiral stationary phases in their immobilized form were employed to explore their stereoselectivity for a series of closely related group of analytes. The most important characteristics of LC and SFC systems were evaluated through the variation of the applied chromatographic conditions (e.g., the nature and content of the alcohol modifier, the concentration of additives, temperature). The columns Chiralpak IC and IG turned out to be the best in both LC and SFC modalities. Temperature-dependence study indicated enthalpy-controlled separation in most cases; however, separation controlled by entropy was also registered.

Preparation, characterization, and application of soluble liquid crystalline molecularly imprinted polymer in electrochemical sensor

A novel soluble molecularly imprinted polymer (SMIP) without chemical cross-linker was successfully synthesized. The quinine (QN), which the structure was similar to the template, was chosen as the immobile template to improve the affinity of MIP. 4-Methyl phenyl dicyclohexyl ethylene (MPDE) was used as the liquid crystal (LC) monomer to increase the rigid of the composite. The cooperative effect of QN and MPDE was demonstrated by comparing with the conventional MIP, which synthesized without QN and MPDE. The polymerization conditions of SMIP including the ratio of MAA to MPDE, template to functional monomer, and HQN to QN were also optimized. Moreover, the characterizations of the SMIP were investigated by the transmission electron microscopy (TEM), field emission scanning electron microscopy (SEM), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and nitrogen adsorption. In binding behavior, the SMIP presented the maximum adsorption capacity (0.37 ± 0.06 mmol/g) and imprinting factor (3.44 ± 0.25). And above all, the obtained polymer exhibited the solubility in the organic solution. In addition, the proposed SMIP as the electrochemical sensor exhibited a significant conductivity and sensitivity with the detection limit of 0.33 μM for HQN, the recoveries for the sample analysis varied from 97.4 to 100.8%, and the intra-day precision and inter-day precision were within 5.5% and 12.5%, respectively. It turned out that the SMIP had demonstrated more excellent potential than the traditional insoluble MIP in the development of the membrane-based electrochemical sensors.Graphical abstract.

Liquid chromatographic separation of alkaloids in herbal medicines: Current status and perspectives

Alkaloids are a widespread group of basic compounds in herbal medicines and have attracted great interest due to various pharmaceutical activities and desirable druggability. Their distinctive structures make chromatographic separation fairly difficult. Peak tailing, poor resolution, and inferior column-to-column reproducibility are common obstacles to overcome. In order to provide a valuable reference, the methodologies and/or strategies on liquid chromatographic separation of alkaloids in herbal medicines proposed from 2012 to 2019 are thoroughly summarized.

Historical chemical annotations of Cinchona bark collections are comparable to results from current day high-pressure liquid chromatography technologies

ETHNOPHARMACOLOGICAL RELEVANCE

Species of the genus Cinchona (Rubiaceae) have been used in traditional medicine, and as a source for quinine since its discovery as an effective medicine against malaria in the 17th century. Despite being the sole cure of malaria for almost 350 years, little is known about the chemical diversity between and within species of the antimalarial alkaloids found in the bark. Extensive historical Cinchona bark collections housed at the Royal Botanic Gardens, Kew, UK, and in other museums may shed new light on the alkaloid chemistry of the Cinchona genus and the history of the quest for the most effective Cinchona barks.

AIM OF THE STUDY

We used High-Pressure Liquid Chromatography (HPLC) coupled with fluorescence detection (FLD) to reanalyze a set of Cinchona barks originally annotated for the four major quinine alkaloids by John Eliot Howard and others more than 150 years ago.

MATERIALS AND METHODS

We performed an archival search on the Cinchona bark collections in the Economic Botany Collection housed in Kew, focusing on those with historical alkaloid content information. Then, we performed HPLC analysis of the bark samples to separate and quantify the four major quinine alkaloids and the total alkaloid content using fluorescence detection. Correlations between historic and current annotations were calculated using Spearman's rank correlation coefficient, before paired comparisons were performed using Wilcox rank sum tests. The effects of source were explored using generalized linear modelling (GLM), before the significance of each parameter in predicting alkaloid concentrations were assessed using chi-square tests as likelihood ratio testing (LRT) models.

RESULTS

The total alkaloid content estimation obtained by our HPLC analysis was comparatively similar to the historical chemical annotations made by Howard. Additionally, the quantity of two of the major alkaloids, quinine and cinchonine, and the total content of the four alkaloids obtained were significantly similar between the historical and current day analysis using linear regression.

CONCLUSIONS

This study demonstrates that the historical chemical analysis by Howard and current day HPLC alkaloid content estimations are comparable. Current day HPLC analysis thus provide a realistic estimate of the alkaloid contents in the historical bark samples at the time of sampling more than 150 years ago. Museum collections provide a powerful but underused source of material for understanding early use and collecting history as well as for comparative analyses with current day samples.

Quantitative determination of major alkaloids in Cinchona bark by Supercritical Fluid Chromatography

Chinoline alkaloids found in Cinchona bark still play an important role in medicine, for example as antimalarial and antiarrhythmic drugs. For the first time Supercritical Fluid Chromatography has been utilized for their separation. Six respective derivatives (dihydroquinidine, dihydroquinine, quinidine, quinine, cinchonine and cinchonidine) could be resolved in less than 7 min, and three of them quantified in crude plant extracts. The optimum stationary phase showed to be an Acquity UPC² Torus DEA 1.7 μm column, the mobile phase comprised of CO₂, acetonitrile, methanol and diethylamine. Method validation confirmed that the procedure is selective, accurate (recovery rates from 97.2% to 103.7%), precise (intra-day ≤2.2%, inter-day ≤3.0%) and linear (R² ≥ 0.999); at 275 nm the observed detection limits were always below 2.5 μg/ml. In all of the samples analyzed cinchonine dominated (1.87%-2.30%), followed by quinine and cinchonidine. Their total content ranged from 4.75% to 5.20%. These values are in good agreement with published data, so that due to unmatched speed and environmental friendly character SFC is definitely an excellent alternative for the analysis of these important natural products.