Analysis of multiaxial impact behavior of polymers

Study of Dynamic Failure Behavior of a Type of PC/ABS Composite

PC/ABS composites are commonly used in airbag covers. In this paper, uniaxial tensile experiments of a PC/ABS composite at different temperatures and strain rates were conducted. The results showed that the temperature and loading rate affect the mechanical properties of the PC/ABS composite. As the temperature increases, the yield stress decreases and the strain at the moment of fracture increases, but the strain rate at the same temperature has a relatively small effect on the mechanical properties, which are similar to ductile materials. The experimental results were applied to the Abaqus model which considered thermal effects and the exact Johnson-Cook constitutive parameters were calculated by applying the inverse method. Based on the constitutive model and the failure analysis findings acquired by DIC, the uniaxial tensile test at the room temperature and varied strain rates were simulated and compared to the test results, which accurately reproduced the test process. The experiment on target plate intrusion of the PC/ABS composite was designed, and a finite-element model was established to simulate the experimental process. The results were compared with the experiments, which showed that the constitutive and the failure fracture strains were valid.

A Phenomenological Constitutive Model Constructed for PC/ABS Blends

Based on previous available constitutive models, a phenomenological constitutive model has been constructed and is proposed to describe the strain, strain rate and temperature dependentdeformation behavior of PC/ABS blends. In this paper, four quasi-static uniaxial tension tests of a specimen tested at different strain rates and temperatures were used to identify the constitutive model constants. By using the proposed constitutive model, predicting the stress-strain behavior of the PC/ABS blend tested at certain strain rate and different temperatures compares well to the behavior exhibited from the tests. From comparison between the DSGZ and the proposed models, proposed model shows a better prediction. Evaluation of the proposed constitutive model was also presented and it has revealed that the proposed model might have a potential to be used for predicting a wide range of temperatures and high strain rates behavior of PC/ABS blends.