Nucleophilic reactivities of tertiary alkylamines

Electronic Effects of Bidentate P,N-Ligands on the Elementary Steps of Au(I)/Au(III) Reactions Relevant to Cross-Coupling Chemistry

Oxidant-free Au(I)/Au(III)-catalyzed cross-coupling has been recently enabled by the use of bidentate P,N-ligands. To further develop these P,N-ligands, computational studies were performed to understand their effects on the oxidative addition of aryl iodide electrophiles with Au(I). Using this mechanistic understanding, six new electron-rich P,N-ligands were synthesized. The ligand exchange equilibrium and reductive elimination were then characterized by using a Au(III)-mediated S-arylation reaction. The results detailed herein provide new fundamental insights in Au(I)/Au(III) ligand design.

Reactivities of tertiary phosphines towards allenic, acetylenic, and vinylic Michael acceptors

The addition of phosphines (PR3) to Michael acceptors is a key step in many Lewis-base catalysed reactions. The kinetics of the reactions of ten phosphines with ethyl acrylate, ethyl allenoate, ethyl propiolate, ethenesulfonyl fluoride, and ethyl 2-butynoate in dichloromethane at 20 °C was followed by photometric and NMR spectroscopic methods. The experimentally determined second-order rate constants k 2 show that electronic effects in sterically unencumbered phosphines affect their nucleophilicity towards different classes of Michael acceptors in the same ordering. Michael acceptors with sp-hybridised electrophilic centres, however, are less susceptible to changes in the PR3 nucleophilicity than those with sp2-hybridised reactive sites. Linear correlations of lg k 2 from this work with published rate constants for SN2 and SN1 reactions as well as with Brønsted basicities and fugalities for PR3 demonstrate the generality of the detected reactivity trends. Computed reaction barriers (ΔG ‡ calc) as well as reaction energies (ΔG add) for Michael adduct formations show excellent correlations with experimentally obtained reaction barriers (ΔG ‡ exp) corroborating the interpretation of the kinetic data and revealing the philicity/fugality features of the reactants in phospha-Michael additions.

Solvent-free transformation of protic ionic liquids into zwitterions

We synthesized several protic ionic liquids (ILs) composed of onium cations and the (trifluoromethylsulfonyl)(vinylsulfonyl)amide anion. The addition of a base catalytically facilitated their transformation into zwitterions (ZIs) under solvent-free conditions, which is a convenient method for synthesizing ZIs from ILs.

Synthesis of sulfonyl 2-aryl-5-methylenyltetrahydropyrans

In this study, the present research describes a high-yield method for the synthesis of sulfonyl 2-aryl-5-methylenetetrahydropyrans by one-pot straightforward DABCO-promoted intramolecular Michael addition of β-sulfonyl styrene with 2-chloromethyl-1-propenol followed by intramolecular alkylation. This Baylis-Hillman-type pathway provides a highly effective stereoselective annulation by forming one carbon-oxygen bond and one carbon-carbon bond.

Enantioselective Allylation of Stereogenic Nitrogen Centers

Most tertiary amines with a stereogenic nitrogen center undergo rapid racemization at room temperature. Consequently, the quaternization of amines under dynamic kinetic resolution seems feasible. N-Methyl tetrahydroisoquinolines are converted into configurationally stable ammonium ions by Pd-catalyzed allylic alkylation. The optimization of conditions and the evaluation of the substrate scope enabled high conversions and an enantiomeric ratio of up to 10:90. We report here the first examples for the enantioselective catalytic synthesis of chiral ammonium ions.

A convenient and versatile SNAr-decarboxylation protocol for the construction of C(sp2)-C(sp3) bonds

Increasing saturation (Fsp³) remains a central strategy in the optimization of properties of molecules during drug discovery. Here, we describe a versatile and operationally simple one-pot procedure for accomplishing this goal via a nucleophilic aromatic substitution-decarboxylation sequence to construct C(sp²)-C(sp³) bonds. The method is tolerant of a variety of biologically privileged moieties and has been demonstrated in a library format.

Electrophilic Activation of [1.1.1]Propellane for the Synthesis of Nitrogen-Substituted Bicyclo[1.1.1]pentanes

Strategies commonly used for the synthesis of functionalised bicyclo[1.1.1]pentanes (BCP) rely on the reaction of [1.1.1]propellane with anionic or radical intermediates. In contrast, electrophilic activation has remained a considerable challenge due to the facile decomposition of BCP cations, which has severely limited the applications of this strategy. Herein, we report the electrophilic activation of [1.1.1]propellane in a halogen bond complex, which enables its reaction with electron-neutral nucleophiles such as anilines and azoles to give nitrogen-substituted BCPs that are prominent motifs in drug discovery. A detailed computational analysis indicates that the key halogen bonding interaction promotes nucleophilic attack without sacrificing cage stabilisation. Overall, our work rehabilitates electrophilic activation of [1.1.1]propellane as a valuable strategy for accessing functionalised BCPs.

Water as a monomer: synthesis of an aliphatic polyethersulfone from divinyl sulfone and water

Using water as a monomer in polymerization reactions presents a unique and exquisite strategy towards more sustainable chemistry. Herein, the feasibility thereof is demonstrated by the introduction of the oxa-Michael polyaddition of water and divinyl sulfone. Upon nucleophilic or base catalysis, the corresponding aliphatic polyethersulfone is obtained in an interfacial polymerization at room temperature in high yield (>97%) within an hour. The polyethersulfone is characterized by relatively high molar mass averages and a dispersity around 2.5. The polymer was tested as a solid polymer electrolyte with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) as the salt. Free-standing amorphous membranes were prepared by a melt process in a solvent-free manner. The polymer electrolyte containing 15 wt% LiTFSI featured an oxidative stability of up to 5.5 V vs. Li/Li⁺ at 45 °C and a conductivity of 1.45 × 10⁻⁸ S cm⁻¹ at room temperature.

This study describes the first example of the polymerization of water as one of two monomers. The obtained polymer allows for a solvent-free preparation of polymer electrolyte membranes exhibiting a high oxidative stability.

Aryl Amination Using Soluble Weak Base Enabled by a Water-Assisted Mechanism

The amination of aryl halides has become one of the most commonly practiced C-N bond-forming reactions in pharmaceutical and laboratory syntheses. The widespread use of strong or poorly soluble inorganic bases for amine activation nevertheless complicates the compatibility of this important reaction class with sensitive substrates as well as applications in flow and automated synthesis, to name a few. We report a palladium-catalyzed C-N coupling using Et₃N as a weak, soluble base, which allows a broad substrate scope that includes bromo- and chloro(hetero)arenes, primary anilines, secondary amines, and amide type nucleophiles together with tolerance for a range of base-sensitive functional groups. Mechanistic data have established a unique pathway for these reactions in which water serves multiple beneficial roles. In particular, ionization of a neutral catalytic intermediate via halide displacement by H₂O generates, after proton loss, a coordinatively unsaturated Pd-OH species that can bind amine substrate triggering intramolecular N-H heterolysis. This water-assisted pathway operates efficiently with even weak terminal bases, such as Et₃N. The use of a simple, commercially available ligand, PAd₃, is key to this water-assisted mechanism by promoting coordinative unsaturation in catalytic intermediates responsible for the heterolytic activation of strong element-hydrogen bonds, which enables broad compatibility of carbon-heteroatom cross-coupling reactions with sensitive substrates and functionality.

The McKenna reaction - avoiding side reactions in phosphonate deprotection

The McKenna reaction is a well-known and popular method for the efficient and mild synthesis of organophosphorus acids. Bromotrimethylsilane (BTMS) is the main reagent in this reaction, which transforms dialkyl phosphonate esters into bis(trimethylsilyl)esters, which are then easily converted into the target acids. However, the versatile character of the McKenna reaction is not always used to its full extent, due to formation of side products. Herein, demonstrated by using model examples we have not only analyzed the typical side processes accompanying the McKenna reaction, but also uncovered new ones. Further, we discovered that some commonly recommended precautions did not always circumvent the side reactions. The proposed results and recommendations may facilitate the synthesis of phosphonic acids.

Crystal Engineering with Multipoint Halogen Bonding: Double Two-Point Donors and Acceptors at Work

The combination of singly or doubly bidentate halogen-bond donors with double bidentate acceptors was investigated as a supramolecular synthon in crystal engineering. The crystal topologies obtained feature novel halogen-bonding motifs like double two-point recognition and infinite chains or networks based on two-point interactions. Induced conformational changes in the double bidentate halogen-bond donors could be exploited to obtain different 1D and 2D networks. All solid-state studies were accompanied by DFT calculations to predict and rationalize the outcome.

Catalytic enantioselective alkylation of 2-alkoxy-tetrahydrofurans

A nickel(ii)-catalyzed asymmetric alkylation of non-resonance-stabilized oxocarbenium ions with carboxylic acid derivatives on a large scale has been disclosed.

Photochemical Activation of Tertiary Amines for Applications in Studying Cell Physiology

Representative tertiary amines were linked to the 8-cyano-7-hydroxyquinolinyl (CyHQ) photoremovable protecting group (PPG) to create photoactivatable forms suitable for use in studying cell physiology. The photoactivation of tamoxifen and 4-hydroxytamoxifen, which can be used to activate Cre recombinase and CRISPR-Cas9 gene editing, demonstrated that highly efficient release of bioactive molecules could be achieved through one- and two-photon excitation (1PE and 2PE). CyHQ-protected anilines underwent a photoaza-Claisen rearrangement instead of releasing amines. Time-resolved spectroscopic studies revealed that photorelease of the tertiary amines was extremely fast, occurring from a singlet excited state of CyHQ on the 70 ps time scale.

OleD Loki as a Catalyst for Tertiary Amine and Hydroxamate Glycosylation

We describe the ability of an engineered glycosyltransferase (OleD Loki) to catalyze the N-glycosylation of tertiary-amine-containing drugs and trichostatin hydroxamate glycosyl ester formation. As such, this study highlights the first bacterial model catalyst for tertiary-amine N-glycosylation and further expands the substrate scope and synthetic potential of engineered OleDs. In addition, this work could open the door to the discovery of similar capabilities among other permissive bacterial glycosyltransferases.

Stereodivergent, Diels-Alder-initiated organocascades employing α,β-unsaturated acylammonium salts: scope, mechanism, and application

Chiral α,β-unsaturated acylammonium salts are novel dienophiles enabling enantioselective Diels–Alder-lactonization (DAL) organocascades leading to cis- and trans-fused, bicyclic γ- and δ-lactones.

Chiral α,β-unsaturated acylammonium salts are novel dienophiles enabling enantioselective Diels–Alder-lactonization (DAL) organocascades leading to cis- and trans-fused, bicyclic γ- and δ-lactones from readily prepared dienes, commodity acid chlorides, and a chiral isothiourea organocatalyst under mild conditions. We describe extensions of stereodivergent DAL organocascades to other racemic dienes bearing pendant secondary and tertiary alcohols, and application to a formal synthesis of (+)-dihydrocompactin is described. A combined experimental and computational investigation of unsaturated acylammonium salt formation and the entire DAL organocascade pathway provide a rationalization of the effect of Brønsted base additives and enabled a controllable, diastereodivergent DAL process leading to a full complement of possible stereoisomeric products. Evaluation of free energy and enthalpy barriers in conjunction with experimentally observed temperature effects revealed that the DAL is a rare case of an entropy-controlled diastereoselective process. NMR analysis of diene alcohol–Brønsted base interactions and computational studies provide a plausible explanation of observed stabilization of exo transition-state structures through hydrogen-bonding effects.

Philicities, Fugalities, and Equilibrium Constants

The mechanistic model of Organic Chemistry is based on relationships between rate and equilibrium constants. Thus, strong bases are generally considered to be good nucleophiles and poor nucleofuges. Exceptions to this rule have long been known, and the ability of iodide ions to catalyze nucleophilic substitutions, because they are good nucleophiles as well as good nucleofuges, is just a prominent example for exceptions from the general rule. In a reaction series, the Leffler-Hammond parameter α = δΔG(⧧)/δΔG° describes the fraction of the change in the Gibbs energy of reaction, which is reflected in the change of the Gibbs energy of activation. It has long been considered as a measure for the position of the transition state; thus, an α value close to 0 was associated with an early transition state, while an α value close to 1 was considered to be indicative of a late transition state. Bordwell's observation in 1969 that substituent variation in phenylnitromethanes has a larger effect on the rates of deprotonation than on the corresponding equilibrium constants (nitroalkane anomaly) triggered the breakdown of this interpretation. In the past, most systematic investigations of the relationships between rates and equilibria of organic reactions have dealt with proton transfer reactions, because only for few other reaction series complementary kinetic and thermodynamic data have been available. In this Account we report on a more general investigation of the relationships between Lewis basicities, nucleophilicities, and nucleofugalities as well as between Lewis acidities, electrophilicities, and electrofugalities. Definitions of these terms are summarized, and it is suggested to replace the hybrid terms "kinetic basicity" and "kinetic acidity" by "protophilicity" and "protofugality", respectively; in this way, the terms "acidity" and "basicity" are exclusively assigned to thermodynamic properties, while "philicity" and "fugality" refer to kinetics. Benzhydrylium ions (diarylcarbenium ions) with para- and meta-substituents are used as reference compounds for these investigations, because their Lewis acidities and electrophilicities can be varied by many orders of magnitude, while the steric surroundings of the reaction centers are kept constant. The rate constants for their reactions with nucleophiles correlate linearly over a wide range with the Lewis acidities of the benzhydrylium ions: from slow reactions with late transition states to very fast reactions with early, reactant-like transition states (including reactions which proceed without an enthalpic barrier, ΔH(⧧) = 0). Thus, unequivocal evidence is obtained that even within a series of closely related reactions, the Leffler-Hammond α cannot be a measure for the position of the transition state. Differences in intrinsic barriers lead to deviations from the linear rate-equilibrium correlations and give rise to counterintuitive phenomena. Thus, 1,4-diazabicyclo[2.2.2]octane (DABCO) reacts with lower intrinsic barriers than 4-(dimethylamino)pyridine (DMAP) and, therefore, is a stronger nucleophile as well as a better nucleofuge than DMAP. Common synthetically used SN2 reactions are presented, in which weak nucleophiles replace stronger ones. Whereas solvolysis rates of alkoxy- and alkyl-substituted benzhydryl derivatives correlate linearly with the Lewis acidities of the resulting carbenium ions, this is not the case for amino-substituted benzhydrylium ions, where differences in intrinsic barriers play a major role. The common rule that a structural variation, which increases the electrophilicity of a carbocation at the same time reduces its electrofugality, does not hold any longer. The need to systematically analyze the role of intrinsic barriers is emphasized.

New electron-donor and -acceptor architectures from benzofurazans and sym-triaminobenzenes: intermediates, products and an unusual nitro group shift

New all-conjugated C-C coupling products bearing both an electron-poor and an electron-rich aromatic moiety have been obtained from the reaction between sym-triaminobenzene derivatives and a series of isomeric chloro-nitrobenzofurazans. The reactions occur under mild reaction conditions, and in some cases a different behaviour depending on the presence, or not, of triethylamine was observed. From 1,3,5-tris(N-morpholinyl)benzene and 5-chloro-4-nitrobenzofurazan in the presence of triethylamine an unexpected product derived from the shift of the nitro group from C-4 to C-5 of the electrophile and bearing the nucleophile at position 4 was obtained. Moreover, from the coupling between 1,3,5-tris(N-pyrrolidinyl)benzene and 4-chloro-7-nitrobenzofurazan a highly stable Wheland intermediate was isolated.

Benzhydrylium and tritylium ions: complementary probes for examining ambident nucleophiles

The linear free energy relationship log k = sN(N + E) (eq. 1), in which E is an electrophilicity, N is a nucleophilicity, and sN is a nucleophile-dependent sensitivity parameter, is a reliable tool for predicting rate constants of bimolecular electrophile-nucleophile combinations. Nucleophilicity scales that are based on eq. (1) rely on a set of structurally similar benzhydrylium ions (Ar2CH+) as reference electrophiles. As steric effects are not explicitely considered, eq. (1) cannot unrestrictedly be employed for reactions of bulky substrates. Since, on the other hand, the reactions of tritylium ions (Ar3C+) with hydride donors, alcohols, and amines were found to follow eq. (1), tritylium ions turned out to be complementary tools for probing organic reactivity. Kinetics of the reactions of Ar3C+ with π-nucleophiles (olefins), n-nucleophiles (amines, alcohols, water), hydride donors and ambident nucleophiles, such as the anions of 5-substituted Meldrum’s acids, are discussed to analyze the applicability of tritylium ions as reference electrophiles.

Mechanism of phosphine borane deprotection with amines: the effects of phosphine, solvent and amine on rate and efficiency

The kinetics of borane transfer from simple tertiary phosphine borane adducts to a wide range of amines have been determined. All data obtained, including second-order kinetics, lack of cross-over, and negative entropies of activation for reaction of triphenylphosphine borane with quinuclidine and triethylamine, are consistent with a direct (SN 2-like) transfer process, rather than a dissociative (SN 1-like) process. The identities of the amine, phosphine, and solvent all impact substantially on the rate (k) and equilibrium (K) of the transfer, which in some cases vary by many orders of magnitude. P-to-N transfer is more efficient with cyclic amines in apolar solvents due to reduced entropic costs and ground-state destabilisation. Taken as a whole, the data allow informed optimisation of the deprotection step from the stand-point of rate, or synthetic convenience. In all cases, both reactants should be present at high initial concentration to gain kinetic benefit from the bimolecularity of the process. Ultimately, the choice of amine is dictated by the identity of the phosphine borane complex. Aryl-rich phosphine boranes are sufficiently reactive to allow use of diethylamine or pyrrolidine as a volatile low polarity solvent and reactant, whereas more alkyl-rich phosphines benefit from the use of more reactive amines, such as 1,4-diaza[2.2.2]bicyclooctane (DABCO), in apolar solvents at higher temperatures.

Scales of Lewis basicities toward C-centered Lewis acids (carbocations)

Equilibria for the reactions of benzhydryl cations (Ar2CH(+)) with phosphines, tert-amines, pyridines, and related Lewis bases were determined photometrically in CH2Cl2 and CH3CN solution at 20 °C. The measured equilibrium constants can be expressed by the sum of two parameters, defined as the Lewis Acidity (LA) of the benzhydrylium ions and the Lewis basicity (LB) of the phosphines, pyridines, etc. Least-squares minimization of log K = LA + LB with the definition LA = 0 for (4-MeOC6H4)2CH(+) gave a Lewis acidity scale for 18 benzhydrylium ions covering 18 orders of magnitude in CH2Cl2 as well as Lewis basicities (with respect to C-centered Lewis acids) for 56 bases. The Lewis acidities correlated linearly with the quantum chemically calculated (B3LYP/6-311++G(3df,2pd)//B3LYP/6-31G(d,p) level) methyl anion affinities of the corresponding benzhydrylium ions, which can be used as reference compounds for characterizing a wide variety of Lewis bases. The equilibrium measurements were complemented by isothermal titration calorimetry studies. Rates of SN1 solvolyses of benzhydryl chlorides, bromides, and tosylates derived from E(13-33)(+), i.e., from highly reactive carbocations, correlate excellently with the corresponding Lewis acidities and the quantum chemically calculated methyl anion affinities. This correlation does not hold for solvolyses of derivatives of the better stabilized amino-substituted benzhydrylium ions E(1-12)(+). In contrast, the correlation between electrophilic reactivities and Lewis acidities (or methyl anion affinities) is linear for all donor-substituted benzhydrylium ions E(1-21)(+), while the acceptor-substituted benzhydrylium ions E(26-33)(+) react more slowly than expected from their thermodynamic stabilities. The boundaries of linear rate-equilibrium relationships were thus defined.

Diastereo- and enantioselective addition of anilide-functionalized allenoates to N-acylimines catalyzed by a pyridylalanine-based peptide

A selective peptide-catalyzed addition of allenic esters to N-acylimines is reported. Tetrasubstituted allenes were achieved with up to 42:1 diastereomeric ratio and 94:6 enantiomeric ratio (up to 99:1 er after recrystallization of the major diastereomer). An exploration of the role of individual amino acids within the peptide was undertaken. The scope of the reaction was explored and revealed heightened reactivity with thioester-containing allenes. A mechanistic framework that may account for the observed reactivity is also described.

Ketene reactions with tertiary amines

Tertiary amines react rapidly and reversibly with arylketenes in acetonitrile forming observable zwitterions, and these undergo amine catalyzed dealkylation forming N,N-disubstituted amides. Reactions of N-methyldialkylamines show a strong preference for methyl group loss by displacement, as predicted by computational studies. Loss of ethyl groups in reactions with triethylamine also occur by displacement, but preferential loss of isopropyl groups in the phenylketene reaction with diisopropylethylamine evidently involves elimination. Quinuclidine rapidly forms long-lived zwitterions with arylketenes, providing a model for catalysis by cinchona and related alkaloids in stereoselective additions to ketenes.

Observation of guanidine–carbon dioxide complexation in solution and its role in the reaction of carbon dioxide and propargylamines

The first observation of guanidine–CO₂ ‘activation’ complexes in solution and their implications on the catalytic activity of guanidines are reported.

Photogeneration of benzhydryl cations by near-UV laser flash photolysis of pyridinium salts

Laser flash irradiation of substituted N-benzhydryl pyridinium salts yields benzhydryl cations (diarylcarbenium ions) and/or benzhydryl radicals (diarylmethyl radicals). The use of 3,4,5-triamino-substituted pyridines as photoleaving groups allowed us to employ the third harmonic of a Nd/YAG laser (355 nm) for the photogeneration of benzhydryl cations. In this way, benzhydryl cations can also be photogenerated in the presence of aromatic compounds and in solvents which are opaque at the wavelength of the quadrupled Nd/YAG laser (266 nm). To demonstrate the scope and limitations of this method, the rate constants for the bimolecular reactions of benzhydryl cations with several substituted pyridines were determined in acetonitrile and with water in acetone. The obtained data agree with results obtained by stopped-flow UV-vis spectroscopic measurements. The rate constants for the reaction of the 4,4'-bis[methyl(2,2,2-trifluoroethyl)amino]benzhydrylium ion with 4-(dimethylamino)pyridine were also determined in dimethyl sulfoxide, N,N-dimethylformamide, and acetone. From the second-order rate constants, we derived the nucleophilicity parameters N and s(N) for the substituted pyridines, as defined by the linear free energy relationship, log k(2) = s(N)(N + E).

Nucleofugality and nucleophilicity of fluoride in protic solvents

A series of p-substituted benzhydryl fluorides (diarylfluoromethanes) were prepared and subjected to solvolysis reactions, which were followed conductometrically. The observed first-order rate constants k(1)(25 °C) were found to follow the correlation equation log k(1)(25 °C) = s(f)(N(f) + E(f)), which allowed us to determine the nucleofuge-specific parameters N(f) and s(f) for fluoride in different aqueous and alcoholic solvents. The rates of the reverse reactions were measured by generating benzhydrylium ions (diarylcarbenium ions) laser flash photolytically in various alcoholic and aqueous solvents in the presence of fluoride ions and monitoring the rate of consumption of the benzhydrylium ions by UV-vis spectroscopy. The resulting second-order rate constants k(-1)(20 °C) were substituted into the correlation equation log k(-1) = s(N)(N + E) to derive the nucleophilicity parameters N and s(N) for fluoride in various protic solvents. Complete Gibbs energy profiles for the solvolysis reactions of benzhydryl fluorides are constructed.