Poly-(ε-caprolactone) (PCL) and poly(hydroxy-butyrate) (PHB) blends containing seaweed fibers: Morphology and thermal-mechanical properties

Influence of microbial biomass content on biodegradation and mechanical properties of poly(3-hydroxybutyrate) composites

Biodegradation rates and mechanical properties of poly(3-hydroxybutyrate) (PHB) composites with green algae and cyanobacteria were investigated for the first time. To the authors knowledge, the addition of microbial biomass led to the biggest observed effect on biodegradation so far. The composites with microbial biomass showed an acceleration of the biodegradation rate and a higher cumulative biodegradation within 132 days compared to PHB or the biomass alone. In order to determine the causes for the faster biodegradation, the molecular weight, the crystallinity, the water uptake, the microbial biomass composition and scanning electron microscope images were assessed. The molecular weight of the PHB in the composites was lower than that of pure PHB while the crystallinity and microbial biomass composition were the same for all samples. A direct correlation of water uptake and crystallinity with biodegradation rate could not be observed. While the degradation of molecular weight of PHB during sample preparation contributed to the improvement of biodegradation, the main reason was attributed to biostimulation by the added biomass. The resulting enhancement of the biodegradation rate appears to be unique in the field of polymer biodegradation. The tensile strength was lowered, elongation at break remained constant and Young's modulus was increased compared to pure PHB.

Algae application in civil construction: A review with focus on the potential uses of the pelagic Sargassum spp. biomass

Pelagic Sargassum, usually found at the Sargasso Sea and the Western portion of the North Atlantic and Gulf of Mexico, has been detected in many new locations through the tropical Atlantic. The huge biomass found from the African coast to the Caribbean was called the Great Atlantic Sargassum Belt and is responsible for the stranding of tons of algae on coastal regions. Despite the environmental, social, and economic impacts, sargassum is a valuable source for multiple uses at the industry, such as alginates, cosmetics, recycled paper and bioplastics, fertilizers, and as raw material for civil construction. This work presents a systematic literature review on the use of algae at the civil construction sector, with a focus on the valorization of the pelagic Sargassum spp. biomass, by identifying the potential applications related to the use of other algal species. The review considered other genera of marine algae and marine angiosperms, resulting in a total of 31 selected articles. The marine grass Posidonia oceanica was the most used species, found in eight published papers, followed by the red alga Kappaphycus alvarezii with four studies. Two articles were available on the use of pelagic Sargassum spp. (S. fluitans and S.natans) for construction materials (adobe and pavement), with potential good results. The literature presented results from the use of marine algae and sea grasses for particleboards, polymeric and cemented composites, adobe, pavement, facades, and roofs. This article provides a state-of-the-art review of algal application in the civil construction sector and points out the main directions for the potentialities on the insertion of the Sargassum spp. biomass into the production chain of the sector.

Algal biopolymers as sustainable resources for a net-zero carbon bioeconomy

The era for eco-friendly polymers was ushered by the marine plastic menace and with the discovery of emerging pollutants such as micro-, nano-plastics, and plastic leachates from fossil fuel-based polymers. This review investigates algae-derived natural, carbon neutral polysaccharides and polyesters, their structure, biosynthetic mechanisms, biopolymers and biocomposites production process, followed by biodegradability of the polymers. The review proposes acceleration of research in this promising area to address the need for eco-friendly polymers and to increase the cost-effectiveness of algal biorefineries by coupling biofuel, high-value products, and biopolymer production using waste and wastewater-grown algal biomass. Such a strategy improves overall sustainability by lowering costs and carbon emissions in algal biorefineries, eventually contributing towards the much touted circular, net-zero carbon future economies. Finally, this review analyses the evolution of citation networks, which in turn highlight the emergence of a new frontier of sustainable polymers from algae.

Utilization of microalgae residue and isolated cellulose nanocrystals: A study on crystallization kinetics of poly(ɛ-caprolactone) bio-composites

Exploration of biodegradable materials for conventional application has taken a rising interest across the world. The presented work primarily focused on exploring the effectiveness of isolated CNCs from marine de-oiled green algae biomass residue (Dunaliella tertiolecta) in synthesized poly(ɛ-caprolactone) (PCL). The washed algae biomass residue (WABR) and algae derived CNCs were explored as two different bio-fillers incorporated into PCL for comparison and development of biodegradable and flexible bio-composites with varying bio-filler loading. FTIR, XRD, TGA, UTM, DSC, POM, and SAXS characterized the developed PCL/WABR and PCL/CNC bio-composites. Improved thermal stability was observed in PCL/CNC bio-composites by ~10 °C rise. Besides, increased modulus of 18.38 MPa and tensile strength was obtained in PCL/CNC/1 bio-composites. However, the isothermal kinetics study (at 45 °C) revealed the reduction in the degree of crystallinity of bio-composites, and the axialite formation was visualized via POM. Moreover, CNCs was found as an excellent nucleating agent and effective bio-filler as compared to WABR.

Effect of seaweed on mechanical, thermal, and biodegradation properties of thermoplastic sugar palm starch/agar composites

The aim of this paper is to investigate the characteristics of thermoplastic sugar palm starch/agar (TPSA) blend containing Eucheuma cottonii seaweed waste as biofiller. The composites were prepared by melt-mixing and hot pressing at 140°C for 10min. The TPSA/seaweed composites were characterized for their mechanical, thermal and biodegradation properties. Incorporation of seaweed from 0 to 40wt.% has significantly improved the tensile, flexural, and impact properties of the TPSA/seaweed composites. Scanning electron micrograph of the tensile fracture showed homogeneous surface with formation of cleavage plane. It is also evident from TGA results that thermal stability of the composites were enhanced with addition of seaweed. After soil burial for 2 and 4 weeks, the biodegradation of the composites was enhanced with addition of seaweed. Overall, the incorporation of seaweed into TPSA enhances the properties of TPSA for short-life product application such as tray, plate, etc.

Hyperbranched polyesters as biodegradable and antibacterial additives

Herein, we present novel hyperbranched poly(amino-ester)s functionalized with quaternary ammonium salts.