Determination of mobilities of organic compounds in plant cuticles and correlation with molar volumes

Dynamic modeling of pesticide residue in proso millet under multiple application situations

Proso millet (Panicum miliaceum L.) is a cereal crop with potential resistance to drought and heat stress, making it a promising alternative crop for regions with hot and dry climates. Because of its importance, it is crucial to investigate pesticide residues in proso millet and assess their potential risks to the environment and human health to protect it from insects or pathogens. This study aimed to develop a model for predicting pesticide residues in proso millet using dynamiCROP. The field trials consisted of four plots, with each plot containing three replicates of 10 m2. The applications of pesticides were conducted two or three times for each pesticide. The residual concentrations of the pesticides in the millet grains were quantitatively analyzed using gas and liquid chromatography-tandem mass spectrometry. The dynamiCROP simulation model, which calculates the residual kinetics of pesticides in plant-environment systems, was employed for predicting pesticide residues in proso millet. Crop-specific, environment-specific, and pesticide-specific parameters were utilized to optimize the model. Half-lives of pesticides in grain of proso millet, which were needed to input for dynamiCROP, were estimated using a modified first-order equation. Proso millet-specific parameters were obtained from previous studies. The accuracy of the dynamiCROP model was assessed using statistical criteria, including the coefficient of correlation (R), coefficient of determination (R2), mean absolute error (MAE), relative root mean square error (RRMSE), and root mean square logarithmic error (RMSLE). The model was then validated using additional field trial data, which showed that it could accurately predict pesticide residues in proso millet grain under different environmental conditions. The results demonstrated the accuracy of the model in predicting pesticide residues in proso millet after multiple applications.

Accumulations and temporal trends of polychlorinated biphenyls (PCBs) in olive tree components

In this study, ambient air samples, olive tree branches (1- and 2-year-old) and their leaves (particulate and dissolved phase) were collected simultaneously between January and December months at a suburban site of Bursa-Turkey. Total polychlorinated biphenyl (PCB) concentrations, sampled by employing passive air samplers, ranged from 0.03 to 0.08 ng/m³ in the atmosphere. The average annual total PCB concentrations belonging to the tree components were 1.14 ± 0.32 ng/g DM in dissolved phase in leaves, 0.71 ± 0.32 ng/g DM in particle phase on leaves, 1.06 ± 0.25 ng/g DM in 1-year-old branches, and 0.93 ± 0.23 ng/g DM in 2-year-old branches. It was determined that the correlation between PCB concentrations in olive tree components and the air was low. This result indicated that besides the tree-air exchange, other possible factors (such as soil-to-tree transitions, wind effect, etc.) affect the levels of PCB concentrations in the tree components. Total PCB concentrations decreased from summer to winter in all samples. The percentage ratio of PCB in the dissolved phase in the leaves was generally higher than other tree components in seasons. PCB homologous distributions indicated 5-CBs were dominant in the tree components and 3-CBs were dominant in the air samples. Highly chlorinated PCB congeners (8-CBs and 9-CBs) were found at low concentrations in both air and tree components samples. The samples indicated that the ratio of PCBs in tree components to the total (tree component+ambient air) PCBs slightly increased with increasing the chlorine number.

Evaluation of physiological and biochemical responses of pistachio plants (Pistacia vera L.) exposed to pesticides

Pesticides may manipulate plant physiology as non-target organisms. In this study, we examined biochemical responses of pistachio plants (Pistacia vera L.) to imidacloprid and phosalone as common pesticides used to control pistachio psyllids. Enzymatic characterization in treated plants with pesticides showed greater specific activities of superoxide dismutase, catalase, ascorbate peroxidase, guaiacol peroxidase, phenylalanine ammonia-lyase, glutathione reductase, and glutathione S-transferase compared with untreated plants during 14 days after treatment. Further experiments displayed elevated levels of total phenols and total proteins coupled with significant increases in proline and total soluble carbohydrate contents in treated plants in comparison to untreated plants. Moreover, pesticide treatment leads to a significant decrease in polyphenol oxidase activity. Nevertheless, no significant changes in contents of hydrogen peroxide, malondialdehyde, total chlorophyll, and electrolyte leakage index were obtained in treated plants. Pesticides' impacts on host plant physiology resulted in similar responses between two pesticides with differences in peak days. Overall, the findings of this study provide an insight into the side effects of phosalone and imidacloprid, chemicals with no specific target site in plants, on the physiology and biochemistry of pistachio plants at recommended rates.

Guidelines for biomonitoring persistent organic pollutants (POPs), using lichens and aquatic mosses--a review

During the last decades, awareness regarding persistent organic pollutants (POPs), such dioxins and furans (PCDD/Fs) and polycyclic aromatic hydrocarbons (PAHs), has become a cutting-edge topic, due to their toxicity, bioaccumulation and persistency in the environment. Monitoring of PCDD/Fs and PAHs in air and water has proven to be insufficient to capture deposition and effects of these compounds in the biota. To overcome this limitation, environmental biomonitoring using lichens and aquatic mosses, have aroused as promising tools. The main aim of this work is to provide a review of: i) factors that influence the interception and accumulation of POPs by lichens; ii) how lichens and aquatic bryophytes can be used to track different pollution sources and; iii) how can these biomonitors contribute to environmental health studies. This review will allow designing a set of guidelines to be followed when using biomonitors to assess environmental POP pollution.

Effects of poly- and monodisperse surfactants on 14C-epoxiconazole diffusion in isolated cuticles of Prunus laurocerasus

BACKGROUND

Surfactants are known to enhance the foliar uptake of agrochemicals. It was the aim of this study to compare the enhancing effect of three polydisperse surfactants (Brij 30, Plurafac LF300 and Wettol LF700) and five monodisperse alcohol ethoxylates (C12 E3, C12 E4, C12 E5, C12 E6 and C12 E8) on (14)C-epoxiconazole diffusion in cuticles isolated from cherry laurel (Prunus laurocerasus L.).

RESULTS

Rate constants (k*) of (14) C-epoxiconazole diffusion were measured in the presence and in the absence of the surfactants. Polydisperse surfactants increased the rates of foliar penetration of (14) C-epoxiconazole by factors of between 8 and 16. With monodisperse surfactants, enhancing effects on cuticular penetration were 2-16-fold. Effects were highest with alcohol ethoxylates of intermediate size, whereas they were lower for the smaller, more lipophilic and the larger, more polar monomers. In addition, diffusion of four monodisperse alcohol ethoxylates (C12 E3, C12 E4, C12 E5 and C12 E6 ) across cuticles was measured. Rate constants of alcohol ethoxylates decreased with decreasing lipophility and increasing molecular weight.

CONCLUSION

The results indicate that enhancement of foliar penetration across cuticles by surfactants was most efficient when both (14)C-epoxiconazole and surfactants had similar mobilities in the transport-limiting barrier of the cuticles. This observation should be of interest in future strategies to optimise foliar uptake of agrochemicals using surfactants.

Cuticular uptake of xenobiotics into living plants. Part 2: influence of the xenobiotic dose on the uptake of bentazone, epoxiconazole and pyraclostrobin, applied in the presence of various surfactants, into Chenopodium album, Sinapis alba and Triticum aestivum leaves

This study has determined the uptake of three pesticides, applied as commercial or model formulations in the presence of a wide range of surfactants, into the leaves of three plant species (bentazone into Chenopodium album L. and Sinapis alba L., epoxiconazole and pyraclostrobin into Triticum aestivum L.). The results have confirmed previous findings that the initial dose (nmol mm(-2)) of xenobiotic applied to plant foliage is a strong, positive determinant of uptake. This held true for all the pesticide formulations studied, although surfactant concentration was found to have an effect. The lower surfactant concentrations studied showed an inferior relationship between the amount of xenobiotic applied and uptake. High molecular mass surfactants also produced much lower uptake than expected from the dose uptake equations in specific situations.

Modelling the effects of alcohol ethoxylates on diffusion of pesticides in the cuticular wax of Chenopodium album leaves

Cuticular waxes represent the first and, in most cases, the limiting barrier for foliar uptake of pesticides from solution. Sorption of pesticides in reconstituted cuticular wax (wax/water partition coefficients) of Chenopodium album L. and in isolated cuticular membranes (cuticle/water partition coefficients) of Prunus laurocerasus L. was determined. Diffusion coefficients of pesticides in reconstituted cuticular wax of C. album leaves were size-dependent, increasing with increasing molar volume. In the presence of alcohol ethoxylates, diffusion coefficients were enhanced by up to two orders of magnitude, and size selectivity was significantly decreased. The accelerating effect and the decrease in size selectivity were attributed to plasticisation of the cuticular wax by the alcohol ethoxylates increasing the fluidity in the wax. A free volume model adopted from polymer science was successfully applied to predict diffusion coefficients of pesticides on the basis of the transport properties of the wax (size selectivity and crystallinity), the molar volume of the diffusing compound and the accelerator concentration in the wax.

Comparison of sorption and diffusion by pyridate and its polar metabolite in isolated cuticular wax of Chenopodium album and Hordeum vulgare

Sorption and diffusion of the herbicide pyridate and its metabolite CL9673 were measured in reconstituted cuticular waxes isolated from Chenopodium album L. and Hordeum vulgare L. (cultivar Igri) leaves. The compounds have the same basic chemical structure, except that pyridate is characterized by a C8-alkyl chain bound via a thioester to the ionizable hydroxyl group of CL9673. Sorption of the weak acid CL9673 from aqueous solutions into cuticular waxes was pH-dependent, and the apparent wax/water partition coefficients decreased with increasing pH. Wax/water partition coefficients of pyridate were not dependent on pH, and they were about 4 orders of magnitude higher as compared to the nondissociated species of CL9673. Diffusion coefficients measured in reconstituted cuticular wax for CL9673 fitted established models predicting diffusion coefficients in relation to molar volumes. However, this was not the case with pyridate, which was characterized by a self-accelerating effect leading to diffusion coefficients, which were up to 2 orders of magnitude higher than predicted from the molar volume. This is a remarkable result since pyridate represents a compound combining the properties of an active ingredient and of a plasticizer.

Rates of cuticular penetration of chelated Fe(III): role of humidity, concentration, adjuvants, temperature, and type of chelate

Time courses of cuticular penetration of FeCl3 and Fe(III) complexes of citric acid, EDTA, EDDHA (Sequestrene 138Fe), imidodisuccinic acid (IDHA), and ligninsulfonic acid (Natrel) were studied using astomatous cuticular membranes (CMs) isolated from Populus x canescens leaves. At 100% relative humidity, the Fe(III) chelates disappeared exponentially with time from the surface of the CMs; that is, penetration was a first-order process that can be described using rate constants or half-times of penetration (t(1/2)). Half-times ranged from 20 to 30 h. At 90% humidity, penetration rates were insignificant with the exception of Natrel, for which t(1/2) amounted to 58 h. Rate constants were independent of temperature (15, 25, and 35 degrees C). Permeability decreased with increasing Fe chelate concentration (IDHA and EDTA). At 100% humidity, half-times measured with FeIDHA were 11 h (2 mmol L(-1)), 17 h (10 mmol L(-1)) and 36 h (20 mmol L(-1)), respectively. In the presence of FeEDTA, penetration of CaCl2 was slowed greatly. Half-times for penetration of CaCl2, which were 1.9 h in the absence of FeEDTA, rose to 3.12 h in the presence of an equimolar concentration of EDTA and 13.3 h when the FeEDTA concentration was doubled. Hence, Fe chelates reduced permeability of CMs to CaCl2 and to the Fe chelates themselves. It is suggested that Fe chelates reduced the size of aqueous pores. This view is supported by the fact that rate constants for calcium salts were about 5 times higher than for Fe chelates with the same molecular weights. Adding Tween 20 (5 g L(-1)) as a humectant did not increase permeability to FeIDHA at 90% humidity and below, while addition of glycine betaine did. Penetration of FeCl3 applied at 5 g L(-1) (pH 1.5) was not a first order process as rate constants decreased rapidly with time. Only 2% of the dose penetrated during the first 2 h and less than that in the subsequent 8 h. Recovery was only 70%. This was attributed to the formation of insoluble Fe hydroxide precipitates on CMs. These results explain why in the past foliar application of Fe compounds had limited success. Inorganic Fe salts are instable and phytotoxic because of low pH, while Fe chelates penetrate slowly and 100% humidity is required for significant penetration rates. Concentrations as low as reasonably possible should be used. These physical facts are expected to apply to stomatous leaf surfaces as well, but absolute rates probably depend on leaf age and plant species. High humidity in stagnant air layers may favor penetration rates across stomatous leaf surfaces when humidity in bulk air is below 100%.

Current issues and uncertainties in the measurement and modelling of air-vegetation exchange and within-plant processing of POPs

Air-vegetation exchange of POPs is an important process controlling the entry of POPs into terrestrial food chains, and may also have a significant effect on the global movement of these compounds. Many factors affect the air-vegetation transfer including: the physicochemical properties of the compounds of interest; environmental factors such as temperature, wind speed, humidity and light conditions; and plant characteristics such as functional type, leaf surface area, cuticular structure, and leaf longevity. The purpose of this review is to quantify the effects these differences might have on air/plant exchange of POPs, and to point out the major gaps in the knowledge of this subject that require further research. Uptake mechanisms are complicated, with the role of each factor in controlling partitioning, fate and behaviour process still not fully understood. Consequently, current models of air-vegetation exchange do not incorporate variability in these factors, with the exception of temperature. These models instead rely on using average values for a number of environmental factors (e.g. plant lipid content, surface area), ignoring the large variations in these values. The available models suggest that boundary layer conductance is of key importance in the uptake of POPs, although large uncertainties in the cuticular pathway prevents confirmation of this with any degree of certainty, and experimental data seems to show plant-side resistance to be important. Models are usually based on the assumption that POP uptake occurs through the lipophilic cuticle which covers aerial surfaces of plants. However, some authors have recently attached greater importance to the stomatal route of entry into the leaf for gas phase compounds. There is a need for greater mechanistic understanding of air-plant exchange and the 'scaling' of factors affecting it. The review also suggests a number of key variables that researchers should measure in their experiments to allow comparisons to be made between studies in order to improve our understanding of what causes any differences in measured data between sites.

A new method for assessing foliar uptake of fungicides using Congo Red as a tracer

In order to develop a new method for measuring foliar uptake of fungicides, Congo Red was selected as a tracer, and optimum procedures were established for washing, extracting and analyzing it and fungicides from leaf surfaces. Congo Red, a water-soluble dye, was not absorbed into cucumber or rice leaf, even in the presence of various surfactants, and was completely washable from leaf surfaces by aqueous acetonitrile solutions. Congo Red and fungicides in washings were quantified to calculate the amount of foliar uptake of the latter, by comparing the ratio to Congo Red. The optimum concentration of Congo Red in a formulation should be established in order to minimize its influence on fungicide uptake. Although Congo Red has proved to be useful with a conventional droplet application method, it will give more realistic and practical results with the spraying method used in the present study.

The kinetics and reversibility of the partitioning of polychlorinated biphenyls between air and ryegrass

Lolium multiflorum (ryegrass) was contaminated with technical mixtures of polychlorinated biphenyls (PCBs) via the gas phase and the subsequent elimination of the PCBs from the vegetation was studied under field conditions. There was a pronounced decrease in the concentrations of the di- through to the pentachlorinated congeners over the 240-h elimination period. For many of the congeners the elimination was nearly complete, suggesting that the partitioning of these compounds from the gas phase into ryegrass is largely reversible. The elimination followed first order kinetics. The elimination half-lives were linearly proportional to the plant/air equilibrium partition coefficients (K(PA)) of the PCB congeners and ranged from 22 h for PCBs 8 + 5 to 87 h for PCBs 84 + 101. For the hexa- through to the octachlorinated congeners no significant decrease in the concentration of the vegetation was observed during the elimination experiment. The elimination was described well using a two-resistance model of PCB desorption which indicated that elimination of the di- and trichlorinated PCBs was limited by transport within the plant itself while elimination of the higher chlorinated congeners was limited by transport from the plant surface into the atmosphere. Furthermore, the results demonstrate that if elimination of higher chlorinated PCBs from ryegrass via biological or photochemical degradation occurs, then it is very slow.

Interaction of phosphatidylcholine liposomes with the human stratum corneum

The interaction of dimyristoylphosphatidylcholine liposomes with the human stratum corneum was investigated by confocal laser scanning microscopy and differential scanning calorimetry. Human skin is characterized by a high autofluorescence. By introducing appropriate optical filters the autofluorescence of the skin was depressed and the penetration profile of fluorescence labelled vesicles was investigated. From optical sectioning it was obvious that neither the vesicles nor the fluorophore N-(lissamine rhodamine B sulfonyl)diacylphophatidylethanolamine (Rho-PE) penetrates in detectable amounts into the human skin. Differential scanning calorimetry of human stratum corneum revealed, that the peak positions of the human stratum corneum specific endothermic transitions at 10 degrees C, 35 degrees C, 50 degrees C, 62 degrees C, 73 degrees C and 81 degrees C did not change significantly after 18 h of non-occlusive vesicle application. However, the enthalpy of the transitions at 35 degrees C, 50 degrees C, 62 degrees C and 73 degrees C, estimated through peak heights increased, relative to the protein related peak at 81 degrees C. A novel transition at 10 degrees C was observed. From these data we conclude that DMPC liposomes do not penetrate intact into the human skin. We deduce, however, that the vesicles disintegrate at the surface of stratum corneum after non-occlusive application. The individual lipid molecules then interact with the lipid barrier of the stratum corneum and penetrate into the latter, which results in an increase of the enthalpy, related to the lipid components of the SC.