Expanding the linear dynamic range in quantitative high performance liquid chromatography/tandem mass spectrometry by the use of multiple product ions

High throughput LC/ESI-MS/MS method for simultaneous analysis of 20 oral molecular-targeted anticancer drugs and the active metabolite of sunitinib in human plasma

Many types of oral molecular-targeted anticancer drugs are clinically used in cancer genomic medicine. Combinations of multiple molecular-targeted anticancer drugs are also being investigated, expecting to prolong the survival of patients with cancer. Therapeutic drug monitoring of oral molecular-targeted drugs is important to ensure efficacy and safety. A liquid chromatography/electrospray ionization-tandem mass spectrometry (LC/ESI-MS/MS) has been used for simultaneous determination of these drugs in human plasma. However, the sensitivity of mass spectrometers and differences in the therapeutic range of drugs have rendered the development of simultaneous LC/ESI-MS/MS methods difficult. In this study, a simultaneous quantitative method for 20 oral molecular-targeted anticancer drugs and the active metabolite of sunitinib was developed based on the results of linear range shifts of the calibration curves using four ion abundance adjustment techniques (collision energy defects, in-source collision-induced dissociation, secondary product ion selected reaction monitoring, and isotopologue selected reaction monitoring). The saturation of the detector for the seven analytes was resolved by incorporating optimal ion abundance adjustment techniques. Furthermore, the reproducibility of this method was confirmed in validation tests, and plasma from patients was measured by this method to demonstrate its usefulness in actual clinical practice. This analytical method is expected to make a substantial contribution to the promotion of personalized medicine in the future.

From fundamentals in calibration to modern methodologies: A tutorial for small molecules quantification in liquid chromatography-mass spectrometry bioanalysis

Over the last two decades, liquid chromatography coupled to mass-spectrometry (LC‒MS) has become the gold standard to perform qualitative and quantitative analyses of small molecules. When quantitative analysis is developed, an analyst usually refers to international guidelines for analytical method validation. In this context, the design of calibration curves plays a key role in providing accurate results. During recent years and along with instrumental advances, strategies to build calibration curves have dramatically evolved, introducing innovative approaches to improve quantitative precision and throughput. For example, when a labeled standard is available to be spiked directly into the study sample, the concentration of the unlabeled analog can be easily determined using the isotopic pattern deconvolution or the internal calibration approach, eliminating the need for multipoint calibration curves. This tutorial aims to synthetize the advances in LC‒MS quantitative analysis for small molecules in complex matrices, going from fundamental aspects in calibration to modern methodologies and applications. Different work schemes for calibration depending on the sample characteristics (analyte and matrix nature) are distinguished and discussed. Finally, this tutorial outlines the importance of having international guidelines for analytical method validation that agree with the advances in calibration strategies and analytical instrumentation.

Importance of Utilizing Natural Isotopologue Transitions in Expanding the Linear Dynamic Range of LC-MS/MS Assay for Small-Molecule Pharmacokinetic Sample Analysis - A mini-review

Liquid chromatography-tandem mass spectrometry (LC-MS/MS) is a widely used quantitative method in small-molecule pharmacokinetic sample analysis. The linear dynamic range of mass analyzers, typically spanning 3 orders of magnitude, is usually insufficient for this purpose. Utilization of multiple isotopologues has been proposed as a compelling approach to expand the linear dynamic range of LC-MS/MS assays, particularly when the detector is saturated. Isotopologues are a statistical mixture of molecules of the same compound but of different exact masses due to the presence of natural chemical isotopes. While the concept of isotopologues is widely recognized in large-molecule bioanalysis and small-molecule metabolite profiling, it has not been commonly implemented in small-molecule targeted quantification. To increase the awareness of the value of isotopologues in small-molecule LC-MS/MS analysis, this minireview provides the basis of isotopologue distribution in MS/MS and summarizes published studies as well as our own experience in utilizing multiple isotopologues to expand the linear dynamic range of small-molecule LC-MS/MS assays. Considering that utilizing natural isotopologue transitions in the LC-MS/MS assays represents an easy, straightforward, and robust way to expand the linear dynamic range, we believe this method deserves wide application in small-molecule pharmacokinetic sample analysis and can particularly benefit people working in pharmacokinetic labs as well as the GLP bioanalytical labs in pharmaceutical industry.

A Comprehensive Multi-Analyte Method for Hair Analysis: Substance-Specific Quantification Ranges and Tool for Task-Oriented Data Evaluation

The aim of the present study was to quantify a large number of analytes including opioids, stimulants, benzodiazepines, z-drugs, antidepressants and neuroleptics within a single sample workup followed by a single analytical measurement. Expected drug concentrations in hair are strongly substance dependent. Therefore, three different calibration ranges were implemented: 0.5 to 600 pg/mg (group 1), 10 to 12,000 pg/mg (group 2) and 50 to 60,000 pg/mg (group 3). In order to avoid saturation effects, different strategies were applied for selected transitions including the use of parent mass ions containing one or two 13C-isotopes and detuning of the declustering potential and/or collision energy. Drugs were extracted from pulverized hair by a two-step extraction protocol and measured by liquid chromatrography--tandem mass spectrometry (LC--MS-MS) using Scheduled MRM™ Algorithm Pro. In total, 275 MRM transitions including 43 deuterated standards were measured. The method has been fully validated according to international guidelines. A MultiQuant™ software based tool for task-oriented data evaluation was established, which allows extracting selected information from the measured data sets. The matrix effects and recoveries were within the allowed ranges for the majority of the analytes. The lower limits of quantification (LLOQs) were for ∼72% of the analytes in the low-pg/mg range (0.5-5 pg/mg) and for ∼24% of the analytes between 10 and 50 pg/mg. These LLOQs considered cut-offs by the Society of Hair Testing (SoHT), if recommended. The herein established multi-analyte approach meets the specific requirements of forensic hair testing and can be used for the rapid and robust measurement of a wide range of psychoactive substances. The analyte-specific wide concentration ranges open up a wide field of applications.

Development and validation of a UPLC-MS/MS method with a broad linear dynamic range for the quantification of morphine, morphine-3-glucuronide and morphine-6-glucuronide in mouse plasma and tissue homogenates

The aim of this study was to develop and to validate a UPLC-MS/MS method for the quantification of morphine, morphine-3-glucuronide, and morphine-6-glucuronide in mouse plasma and tissue homogenates to support preclinical pharmacokinetic studies. The sample preparation consisted of protein precipitation with cold (2-8 °C) methanol:acetonitrile (1:1, v/v), evaporation of the supernatant to dryness, and reconstitution of the dry-extracts in 4 mM ammonium formate pH 3.5. Separation was achieved on a Waters UPLC HSS T3 column (150 × 2.1 mm, 1.8 µm) maintained at 50 °C and using gradient elution with a total runtime of 6.7 min. Mobile phase A consisted of 4 mM ammonium formate pH 3.5 and mobile phase B of 0.1% formic acid in methanol:acetonitrile (1:1, v/v). Detection was carried out by tandem mass spectrometry with electrospray ionization in the positive ion mode. The method was validated within a linear range of 1-2,000 ng/mL, 10-20,000 ng/mL, and 0.5-200 ng/mL for morphine, morphine-3-glucuronide, and morphine-6-glucuronide, respectively. In human plasma, the intra- and inter-run precision of all analytes, including the lower limit of quantification levels, were ≤ 15.8%, and the accuracies were between 88.1 and 111.9%. It has been shown that calibration standards prepared in control human plasma can be used for the quantification of the analytes in mouse plasma and tissue homogenates. The applicability of the method was successfully demonstrated in a preclinical pharmacokinetic study in mice.

Strategies and analytical workflows to extend the dynamic range in quantitative LC–MS/MS analysis

Aim: To evaluate alternative analytical strategies to extend the dynamic range in quantitative LC–MS/MS. Methods & results: Two approaches based on prior or no prior knowledge of expected exposure levels were evaluated. These approaches make use of two analytical strategies, which include the use of more than one injection volume or dilution of sample extract with solvents or solvent mixtures. A total of 16 compounds with varying logP values were classified into polar and nonpolar groups and used in this evaluation. From the two analytical strategies, three workflows were derived. Conclusion: All three workflows were successfully evaluated and resulted in good accuracy (80–120%) for all the compound groups.

A simultaneous determination method for 5-fluorouracil and its metabolites in human plasma with linear range adjusted by in-source collision-induced dissociation using hydrophilic interaction liquid chromatography-electrospray ionization-tandem mass spectrometry

We applied a new technique for quantitative linear range shift using in-source collision-induced dissociation (CID) to complex biological fluids to demonstrate its utility. The technique was used in a simultaneous quantitative determination method of 5-fluorouracil (5-FU), an anticancer drug for various solid tumors, and its metabolites in human plasma by liquid chromatography-electrospray ionization-tandem mass spectrometry (LC/ESI-MS/MS). To control adverse effects after administration of 5-FU, it is important to monitor the plasma concentration of 5-FU and its metabolites; however, no simultaneous determination method has yet been reported because of vastly different physical and chemical properties of compounds. We developed a new analytical method for simultaneously determining 5-FU and its metabolites in human plasma by LC/ESI-MS/MS coupled with the technique for quantitative linear range shift using in-source CID. Hydrophilic interaction liquid chromatography using a stationary phase with zwitterionic functional groups, phosphorylcholine, was suitable for separation of 5-FU from its nucleoside and interfering endogenous materials. The addition of glycerin into acetonitrile-rich eluent after LC separation improved the ESI-MS response of high polar analytes. Based on the validation results, linear range shifts by in-source CID is the reliable technique even with complex biological samples such as plasma. Copyright © 2016 John Wiley & Sons Ltd.

Sample reduction strategies in discovery bioanalysis

It is a constant challenge to provide timely bioanalytical support for the evaluation of drug-like properties and PK/PD profiles for the ever-increasing numbers of new chemical entities in a cost-effective manner. While technological advancement in various aspects of LC–MS/MS analysis has significantly improved bioanalytical efficiency, a number of simple sample reduction strategies can be employed to reduce the number of samples requiring analysis, and as a result increase the bioanalytical productivity without deploying additional instruments. In this review, advantages and precautions of common sample reduction strategies, such as sample pooling and cassette dosing, are discussed. In addition, other approaches such as reducing calibration standards and eliminating over-the-curve sample reanalysis will also be discussed. Taken together, these approaches can significantly increase the capacity and throughput of discovery bioanalysis without adding instruments, and are viable means to enhance the overall productivity of the bioanalytical laboratory.

A systematic approach for developing a robust LC–MS/MS method for bioanalysis

In order to meet the drug discovery and development needs of pharmaceutical companies, CROs are constantly challenged by the requirements for rapid LC–MS/MS method development prior to method validation and sample analysis. In order to meet this challenge, a comprehensive method development program, nicknamed ‘Amoeba™’, which uses a series of written protocols for standardized and efficient method development was developed. In this paper, the genesis of the Amoeba method development program is elucidated in detail and a number of case studies are presented to showcase the execution of the Amoeba method development program. Using this program, the majority of the most critical information regarding the assay can be captured. While the Amoeba program has been proven to be effective, we recognize that the development of a robust bioanalytical method for use in pharmaceutical industry also requires the careful consideration of many critical parameters and the ability to identify and resolve potential issues. The refinement of the assay relies on further evaluation of several critical factors including, but not limited to, internal standard response, matrix effects (phospholipid or nonphospholipid related) and carryover.

Systematic evaluation of the root cause of non-linearity in liquid chromatography/tandem mass spectrometry bioanalytical assays and strategy to predict and extend the linear standard curve range

RATIONALE

The linear range of a liquid chromatography/tandem mass spectrometry (LC/MS/MS) bioanalytical assay is typically about three orders of magnitude. A broader standard curve range is favored since it can significantly reduce the time, labor and potential errors related to sample dilution - one of the bottlenecks in sample analysis. Using quadratic regression to fit the standard curve can, to a certain degree, extend the dynamic range. However, the use of a quadratic regression is controversial, particularly in regulated bioanalysis.

METHODS

A number of compounds, with different physicochemical properties and ionization efficiencies, were evaluated to understand the cause of the non-linear behavior of the standard curve.

RESULTS

The standard curve behavior is primarily associated with the absolute analyte response but not the analyte concentration, the properties of the analyte, or the nature of the matrix when a stable-isotope-labeled internal standard (SIL-IS) is used. For all the test compounds, a non-linear curve was observed when signals exceeded a certain response, which depends on the detector used in the mass spectrometer. With typical API4000 instruments used for the experiments, this critical response level was determined to be ~1 E+6 counts per second (cps) and it was successfully used to predict the linear ranges for the test compounds. By simultaneously monitoring two selective reaction monitoring (SRM) channels of different intensity and using SIL-IS, a linear range of five orders of magnitude was achieved.

CONCLUSIONS

In this work, the root cause of the non-linear behavior of the standard curve when using a SIL-IS was investigated and identified. Based on the findings, an improved multiple SRM channels approach was proposed and successfully applied to obtain a linear dynamic range of five orders of magnitude for one test compound. This approach may work particularly well for LC/MS/MS bioanalytical assay of dried blood spot (DBS) samples, for which a direct dilution is cumbersome.

Use of a variably sensitive selected reaction monitoring method to extend the linear dynamic range for quantitative high-performance liquid chromatography/tandem mass spectrometry

A method has been devised with the capacity to extend the linear dynamic range of a triple quadrupole mass spectrometer operated in the selected reaction monitoring (SRM) mode of analysis. This extended range experiment can be realized by simultaneously acquiring variably sensitive data, via collision energy adjustment, for the same precursor-to-product ion transition within a single SRM method. While this method can be applied universally to many different study types without any detrimental effect to the analysis or throughput, it was applied herein to acquire and quantify, within a single analysis, the concentrations of GSK-A in a multiple-dose rodent study, that previously required a dilution scheme. Using this methodology, the linear dynamic range of GSK-A was increased over traditional methods by nearly two orders of magnitude, from 2.00-10,000 ng/mL to 0.500-100,000 ng/mL.