XPS study of the atmospheric corrosion of copper alloys of archaeological interest

Fabrication of a sustainable superhydrophobic surface of Ag-NPs@SA on copper alloy for corrosion resistance, photocatalysis, and simulated distribution of Ag atoms

Artificial superhydrophobic surfaces that do not absorb water, like the lotus leaf, show tremendous promise in numerous applications. However, superhydrophobic surfaces are rarely used because of their low stability and endurance. A stable organic superhydrophobic surface (SHS) composed of novel morphology Ag-nanoparticles (NPs) has been fabricated on a copper alloy via etching, immersion, spraying, and annealing treatment, along with a static water contact angle (WCA) of 158 ± 1° and sliding angle (SA) less than 2°. The surface texture, composition, and morphology of the substrate surfaces were explored by using X-ray diffraction, X-ray photoelectron spectroscopy, scanning electron microscopy, energy dispersive spectroscopy, and DFT-based Ag atom distribution. The anti-corrosion study of non-coated and Ag-NP-coated copper alloy was undertaken using electrochemical impedance spectroscopy. Ag-NPs +SA@SHS enhanced the corrosion resistance as compared with bare Cu alloy. The water droplet rolled down the coated Cu alloy, removed the chalk powder from the surface, and indicated an excellent self-cleaning function. Photodegradation of Congo red (CR) and methylene blue (MB) dye samples was assessed by measuring the absorbance through UV-Visible spectrophotometry, where the Ag-NPs coated on the copper alloy were used as a catalyst. The performance of the SHS@Ag-NPs in the aqueous solution was 99.31% and 98.12% for industrial pollutants (CR and MB), with degradation rates of 5.81 × 10-2 s-1 and 5.89 × 10-2 s-1, respectively. These findings demonstrated a simple, rapid, and low-energy fabrication technique for SHS@Ag-NPs. This research reveals a valuable approach for the fabrication of SHS@Ag-NPs on various substrates to extend the superhydrophobic surfaces with ultra-fast self-healing properties, for outdoor applications such as anti-corrosion, for an innovative approach for the remediation of polluted water treatment, and for industrial applications.

Insights into the SILAR Processing of CuxZn1-xS Thin Films via a Chemical, Structural, and Optoelectronic Assessment

Careful analysis of the chemical state of CuxZn1-xS thin films remains an underdeveloped topic although it is key to a better understanding of the phase transformations and the linking between structural and optoelectronic properties needed for tuning the performance of CuxZn1-xS-based next-generation energy devices. Here, we propose a chemical formulation and formation mechanism, providing insights into the successive ionic layer adsorption and reaction (SILAR) processing of CuxZn1-xS, in which the copper concentration directly affects the behavior of the optoelectronic properties. Via chemical, optoelectronic, and structural characterization, including quantitative X-ray photoelectron spectroscopy, we determine that the CuxZn1-xS thin films at low copper concentration are composed of ZnS, metastable CuxZn1-xS, and CuS, where the evidence suggests that a depth compositional gradient exists, which contrasts with homogeneous films reported in the literature. The oxidation states for copper and sulfide species indicate that the films grow following a formation mechanism governed by ionic exchange and diffusion processes. At high copper concentrations, the CuxZn1-xS thin films are covellite CuS that grew on a ZnS seed layer. Hence, this work reiterates that future research related to fine-tuning the application of this material requires a careful analysis of the depth-profile compositional and structural characteristics that can enable high conductivity and transparency.

Combining the Δ-Self-Consistent-Field and GW Methods for Predicting Core Electron Binding Energies in Periodic Solids

For the computational prediction of core electron binding energies in solids, two distinct kinds of modeling strategies have been pursued: the Δ-Self-Consistent-Field method based on density functional theory (DFT), and the GW method. In this study, we examine the formal relationship between these two approaches and establish a link between them. The link arises from the equivalence, in DFT, between the total energy difference result for the first ionization energy, and the eigenvalue of the highest occupied state, in the limit of infinite supercell size. This link allows us to introduce a new formalism, which highlights how in DFT─even if the total energy difference method is used to calculate core electron binding energies─the accuracy of the results still implicitly depends on the accuracy of the eigenvalue at the valence band maximum in insulators, or at the Fermi level in metals. We examine whether incorporating a quasiparticle correction for this eigenvalue from GW theory improves the accuracy of the calculated core electron binding energies, and find that the inclusion of vertex corrections is required for achieving quantitative agreement with experiment.

Degradation of atrazine by electroactivation of persulfate using FeCuO@C modified composite cathode: Synergistic activation mechanism

In sulfate radical-based advanced oxidation processes (SR-AOPs), high-efficiency and perdurable materials have drawn considerable interest for use as cathodes, which can effectively degrade refractory organic contaminants through the synergistic electro-activation and transition metal activation of persulfate (PS). Here, the FeCuO@C modified composite cathode (FeCuO@C/AGF) was synthesized via the solvothermal and thermal treatment method based on the CuFe-MOF-74 structure, and the electro-activation PS process (EC/FeCuO@C/AGF/PS) was developed to effectively remove atrazine (ATZ). The surface morphology, electrochemical characteristics, chemical composition, crystal structure, and electrode surface wettability of FeCuO@C/AGF were investigated. It was found that the proposed EC/FeCuO@C/AGF/PS process can successfully remove 100% of ATZ in 20 min at a low current density (2 mA cm^-2) and a low PS concentration (0.4 mM), and PS is successfully activated by combining the electrical and transition metal synergistic activation. The FeCuO@C/AGF cathode exhibits outstanding catalytic functionality over a broad pH range (2-9) and remains stable over five successive cycles. Additionally, the active species involved in the reaction as well as the potential ATZ degradation reaction mechanisms and pathways are discussed. Electrochemical oxidation is a process in which both radicals (SO₄^·-, ·OH, and O₂^·-) and non-radical (¹O₂) participate in the degradation of ATZ. The intermediates of the ATZ degradation process were studied upon the toxicity changing, and the toxicity of the intermediates was found to be reduced during degradation. These results present a novel approach toward the establishment of an effective and reliable electrode in SR-AOPs that can efficiently treat pesticide wastewater.

Electrochemical Reduction of Nitrate with Simultaneous Ammonia Recovery Using a Flow Cathode Reactor

The presence of excessive concentrations of nitrate in industrial wastewaters, agricultural runoff, and some groundwaters constitutes a serious issue for both environmental and human health. As a result, there is considerable interest in the possibility of converting nitrate to the valuable product ammonia by electrochemical means. In this work, we demonstrate the efficacy of a novel flow cathode system coupled with ammonia stripping for effective nitrate removal and ammonia generation and recovery. A copper-loaded activated carbon slurry (Cu@AC), made by a simple, low-cost wet impregnation method, is used as the flow cathode in this novel electrochemical reactor. Use of a 3 wt % Cu@AC suspension at an applied current density of 20 mA cm^-2 resulted in almost complete nitrate removal, with 97% of the nitrate reduced to ammonia and 70% of the ammonia recovered in the acid-receiving chamber. A mathematical kinetic model was developed that satisfactorily describes the kinetics and mechanism of the overall nitrate electroreduction process. Minimal loss of Cu to solution and maintenance of nitrate removal performance over extended use of Cu@AC flow electrode augers well for long-term use of this technology. Overall, this study sheds light on an efficient, low-cost water treatment technology for simultaneous nitrate removal and ammonia generation and recovery.

Antibacterial Bio-Nanocomposite Textile Material Produced from Natural Resources

Growing demand for sustainable and green technologies has turned industries and research toward the more efficient utilization of natural and renewable resources. In an effort to tackle this issue, we developed an antibacterial textile nanocomposite material based on cotton and peat fibers with immobilized Cu-based nanostructures. In order to overcome poor wettability and affinity for Cu²⁺-ions, the substrate was activated by corona discharge and coated with the biopolymer chitosan before the in situ synthesis of nanostructures. Field emission scanning electron microscopy (FESEM) images show that the application of gallic or ascorbic acid as green reducing agents resulted in the formation of Cu-based nanosheets and mostly spherical nanoparticles, respectively. X-ray photoelectron spectroscopy (XPS) analysis revealed that the formed nanostructures consisted of Cu₂O and CuO. A higher-concentration precursor solution led to higher copper content in the nanocomposites, independent of the reducing agent and chitosan deacetylation degree. Most of the synthesized nanocomposites provided maximum reduction of the bacteria Escherichia coli and Staphylococcus aureus. A combined modification using chitosan with a higher deacetylation degree, a 1 mM solution of CuSO₄ solution, and gallic acid resulted in an optimal textile nanocomposite with strong antibacterial activity and moderate Cu²⁺-ion release in physiological solutions. Finally, the Cu-based nanostructures partially suppressed the biodegradation of the textile nanocomposite in soil.

A practical method to remove perfluorooctanoic acid from aqueous media using layer double hydride system: a prospect for environmental remediation

Perfluorooctanoic acid (PFOA) is an organic compound that is persistent and very toxic to living organisms and the environment. In this study, two kinds of Mg-Al-layered double hydroxides (namely LDH-1 and 2) were synthesized using hydrothermal and dry grinding methods and used to adsorb PFOA from aqueous solution. The kinetic study revealed that a pseudo-2nd order model was the best method for describing the kinetics of sorption, which could emphasize the chemical interaction between PFOAs and LDHs. Among the models tested, the Freundlich model was the best fit for the sorption isotherms. The removal rates of PFOA adsorption by LDH-1 and LDH-2 were 90% and 98.9%, respectively, in the lowest time compared with similar past studies using different adsorbents. The currently synthesized LDHs showed the least equilibrium time, without thermal treatment and the need for activation. The research bears prospects for removing PFOA from aqueous media, thereby demonstrating the potential of employing synthesized LDHs in a fixed-bed filter for the environmental remediation of PFOA-contaminated wastewater bodies.

Nb2O5, LiNbO3, and (Na, K)NbO3 Thin Films from High-Concentration Aqueous Nb-Polyoxometalates

Synthesizing functional materials from water contributes to a sustainable energy future. On the atomic level, water drives complex metal hydrolysis/condensation/speciation, acid-base, ion pairing, and solvation reactions that ultimately direct material assembly pathways. Here, we demonstrate the importance of Nb-polyoxometalate (Nb-POM) speciation in enabling deposition of Nb₂O₅, LiNbO₃, and (Na, K)NbO₃ (KNN) from high-concentration solutions, up to 2.5 M Nb for Nb₂O₅ and ∼1 M Nb for LiNbO₃ and KNN. Deposition of KNN from 1 M Nb concentration represents a potentially important advancment in lead-free piezoelectrics, an application that requires thick films. Solution characterization via small-angle X-ray scattering and Raman spectroscopy described the speciation for all precursor solutions as the [H_xNb₂₄O₇₂]^(x-24) POM, as did total pair distribution function analyses of X-ray scattering of amorphous gels prior to conversion to oxides. The tendency of the Nb₂₄-POM to form extended networks without crystallization leads to conformal and well-adhered films. The films were characterized by X-ray diffraction, atomic force microscopy, scanning electron microscopy, ellipsometry, and X-ray photoelectron spectroscopy. As a strategy to convert aqueous deposition solutions from {Nb₁₀}-POMs to {Nb₂₄}-POMs, we devised a general procedure to produce doped Nb₂O₅ thin films including Ca, Ag, and Cu doping.

A Metal-Organic Framework derived Cux Oy Cz Catalyst for Electrochemical CO2 Reduction and Impact of Local pH Change

Developing highly efficient and selective electrocatalysts for the CO2 reduction reaction to produce value-added chemicals has been intensively pursued. We report a series of Cux Oy Cz nanostructured electrocatalysts derived from a Cu-based MOF as porous self-sacrificial template. Blending catalysts with polytetrafluoroethylene (PTFE) on gas diffusion electrodes (GDEs) suppressed the competitive hydrogen evolution reaction. 25 to 50 wt % teflonized GDEs exhibited a Faradaic efficiency of ≈54 % for C2+ products at -80 mA cm-2 . The local OH- ions activity of PTFE-modified GDEs was assessed by means of closely positioning a Pt-nanoelectrode. A substantial increase in the OH- /H2 O activity ratio due to the locally generated OH- ions at increasing current densities was determined irrespective of the PTFE amount.

Extreme Biomimetics: Designing of the First Nanostructured 3D Spongin-Atacamite Composite and its Application

The design of new composite materials using extreme biomimetics is of crucial importance for bioinspired materials science. Further progress in research and application of these new materials is impossible without understanding the mechanisms of formation, as well as structural features at the molecular and nano-level. It presents a challenge to obtain a holistic understanding of the mechanisms underlying the interaction of organic and inorganic phases under conditions of harsh chemical reactions for biopolymers. Yet, an understanding of these mechanisms can lead to the development of unusual-but functional-hybrid materials. In this work, a key way of designing centimeter-scale macroporous 3D composites, using renewable marine biopolymer spongin and a model industrial solution that simulates the highly toxic copper-containing waste generated in the production of printed circuit boards worldwide, is proposed. A new spongin-atacamite composite material is developed and its structure is confirmed using neutron diffraction, X-ray diffraction, high-resolution transmission electron microscopy/selected-area electron diffraction, X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, and electron paramagnetic resonance spectroscopy. The formation mechanism for this material is also proposed. This study provides experimental evidence suggesting multifunctional applicability of the designed composite in the development of 3D constructed sensors, catalysts, and antibacterial filter systems.

Efficient removal and recovery of arsenic from copper smelting flue dust by a roasting method: Process optimization, phase transformation and mechanism investigation

The efficient removal and recovery of arsenic from copper smelting flue dust have received widespread attention due to its extremely high toxicity and carcinogenicity. In this research, a roasting method used for treating the dust at a relatively low temperature (300-400 ℃), with adding sulfuric acid and bitumite, was proposed, in which the reduction of As(Ⅴ) and oxidation of arsenic sulfides were achieved simultaneously. It was proved by thermodynamic analysis and experiments that adding sulfuric acid was favorable for the removal of arsenic, through enhancing the thermodynamic driving force and promoting the transformation of arsenate and arsenic sulfides to As₂O₃. The phase transformation of arsenic was analyzed using XRD, SEM-EDS and XPS, which indicated that coal addition, roasting temperature and H₂SO₄ dosage play essential roles in arsenic removal. Based on the lab-scale experiments, the optimal conditions for arsenic removal were found to be at the roasting temperature of 300-400 °C, roasting time of 2-3 h, coal addition of 5% and H₂SO₄ dosage of 0.2-0.3 mL/g. Around 98% of arsenic was volatilized from the dust, while arsenic content in the residue was decreased to 0.57%. Eventually, arsenic was recovered as As₂O₃ with a high purity of 99.05%.

Rapid removal of organic pollutants by a novel persulfate/brochantite system: Mechanism and implication

Using natural minerals as persulfate activators can develop effective and economical in situ chemical oxidation technology for environmental remediation. Yet, few natural minerals can provide a high activation efficiency. Here, we demonstrate that brochantite (Cu₄SO₄(OH)₆), a natural mineral, can be used as a persulfate activator for the rapid degradation of tetracycline hydrochloride (TC-H). Approximately 70% of TC-H was removed in Cu₄SO₄(OH)₆/PDS within 5 min, which much higher than that of Cu₃P (61.99%), CuO (29.75%), CNT (25.83%), Fe₂O₃, (14.48%) and MnO₂ (9.76%). Experiments and theoretical calculations suggested that surface copper acts as active sites induce the production of free radicals. The synergistic effect of Cu/S promotes the cycle between Cu⁺/Cu²⁺. Sulfate radicals and hydroxyl radicals are the main reactive oxygen species that are responsible for the rapid removal of TC-H. The findings of this work show a novel persulfate/brochantite system and provide useful information for the environmental remediation.

CuS nanoparticles in humid environments: adsorbed water enhances the transformation of CuS to CuSO4

Covellite copper sulfide nanoparticles (CuS NPs) have attracted immense research interest due to their widespread use in a range of biological and energy applications. As such, it is crucial to understand the transformations of these nanomaterials and how these transformations influence the behavior of these nanoparticles in environmental and biological systems. This study specifically focuses on understanding the role of water vapor and adsorbed water in the transformation of CuS NP surfaces to CuSO4 in humid environments. Surface sulfide ions are oxidized to sulfate by oxygen in the presence of water vapor, as detected by atomic force microscopy based photothermal infrared spectroscopy (AFM-PTIR) and in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. These results show that the transformation of CuS to CuSO4 is highly dependent on relative humidity (RH). While sulfide to sulfate conversion is not observed to a great extent at low RH (<20%), there is significant conversion at higher RH (>80%). X-ray photoelectron spectroscopy (XPS) analysis confirms that sulfide is irreversibly oxidized to sulfate. Furthermore, it shows that initially, the Cu ions possess the original oxidation state similar to the original covellite, i.e. Cu+, but they are oxidized to Cu2+ at higher RH. The formation of CuSO4 has also been confirmed by HRTEM. These analyses show that adsorbed water on the NP surfaces enhances the conversion of sulfide to sulfate and the oxidation of Cu+ to Cu2+ in the presence of molecular oxygen.

Magnetism of Kesterite Cu2ZnSnS4 Semiconductor Nanopowders Prepared by Mechanochemically Assisted Synthesis Method

High energy ball milling is used to make first the quaternary sulfide Cu₂ZnSnS₄ raw nanopowders from two different precursor systems. The mechanochemical reactions in this step afford cubic pre-kesterite with defunct semiconducting properties and showing no solid-state ⁶⁵Cu and ¹¹⁹Sn MAS NMR spectra. In the second step, each of the milled raw materials is annealed at 500 and 550 °C under argon to result in tetragonal kesterite nanopowders with the anticipated UV-Vis-determined energy band gap and qualitatively correct NMR characteristics. The magnetic properties of all materials are measured with SQUID magnetometer and confirm the pre-kesterite samples to show typical paramagnetism with a weak ferromagnetic component whereas all the kesterite samples to exhibit only paramagnetism of relatively decreased magnitude. Upon conditioning in ambient air for 3 months, a pronounced increase of paramagnetism is observed in all materials. Correlations between the magnetic and spectroscopic properties of the nanopowders including impact of oxidation are discussed. The magnetic measurements coupled with NMR spectroscopy appear to be indispensable for comprehensive kesterite evaluation.

Epitaxial Stabilization of SrCu3O4 with Infinite Cu3/2O2 Layers

We report the epitaxial thin-film synthesis of SrCu₃O₄ with infinitely stacked Cu₃O₄ layers composed of edge-sharing CuO₄ square planes, using molecular-beam epitaxy. Experimental and theoretical characterizations showed that this material is a metastable phase that can exist by applying tensile biaxial strain from the (001)-SrTiO₃ substrate. SrCu₃O₄ shows an insulating electrical resistivity in accordance with the Cu²⁺ valence state revealed by X-ray photoelectron spectroscopy. First-principles calculations also indicated that the unoccupied d_3z²-r² band becomes substantially stabilized owing to the absence of apical anions, in contrast to A₂Cu₃O₄Cl₂ (A = Sr, Ba) with an A₂Cl₂ block layer and therefore a trans-CuO₄Cl₂ octahedron. These results suggest that SrCu₃O₄ is a suitable parent material for electron-doped superconductivity based on the Cu₃O₄ plane.

Improved SERS activity of non-stoichiometric copper sulfide nanostructures related to charge-transfer resonance

The low enhancement factor of semiconductor SERS substrates is a major obstacle for their practical application. Therefore, there is a need to explore the facile synthesis of new SERS substrates and reveal the SERS enhancement mechanism. Here, we develop a simple, facile and low-cost two-step method to synthesize copper sulfide based nanostructures with different Cu_7.2S₄ contents. The as-synthesized sample is composed of nanosheets with the CuS phase structure. With the increase of the annealing temperature to 300 °C, the CuS content gradually decreases and disappears, and the content of Cu_7.2S₄ and CuSO₄ appears and gradually increases. At the annealing temperature of 350 °C, only CuSO₄ exists. Compared with pure CuS or pure CuSO₄, the detection limit of R6G molecules is the lowest for the composite sample with a higher content of Cu_7.2S₄, indicating that the introduction of non-stoichiometric Cu_7.2S₄ can improve the SERS performance and the higher content of Cu_7.2S₄ leads to a higher SERS activity. Furthermore, to investigate the SERS mechanism, the energy band structures and energy-level diagrams of different probe molecules over CuS, Cu_7.2S₄ and Cu_xS are studied by DFT calculations. Theoretical calculations indicate that the excellent SERS behavior depends on charge transfer resonance. Our work provides a general approach for the construction of excellent metal compound semiconductor SERS active substrates.

Rod-shaped Cu1.81Te as a novel cathode material for aluminum-ion batteries

Aluminum-ion batteries (AIBs) are supposed to be one of the energy storage systems with great potentialities on account of their high safety, low cost and high theoretical volumetric capacity. Herein, we report a novel rod-shaped Cu1.81Te cathode material for AIBs. At 40 mA g-1, the initial discharge capacity can reach 144 mA h g-1. The diffusion coefficient of Al3+ calculated by the galvanostatic intermittent titration technique (GITT) and cyclic voltammetry (CV) tests at different scan rates is larger than that in sulfides, indicating that telluride has faster kinetics. The results of ex situ X-ray photoelectron spectroscopy (XPS), ex situ X-ray diffraction (XRD) and 27Al nuclear magnetic resonance (NMR) prove that the mechanism of the charging and discharging processes is the reversible intercalation and deintercalation of Al3+, which is very important for the subsequent researchers to understand and investigate the mechanism of the Al/Cu1.81Te battery. This work also proves that telluride can also be used as a cathode material for aluminum storage.

Role of Sulfur Trioxide (SO3) in Gas-Phase Elemental Mercury Immobilization by Mineral Sulfide

Mineral sulfide based sorbents were superior alternatives to traditional activated carbons for elemental mercury (Hg⁰) immobilization in industrial flue gas. A systematical study concerning the influence of sulfur trioxide (SO₃) on Hg⁰ adsorption over a nanosized copper sulfide (Nano-CuS) was for the first time conducted. SO₃ was found to significantly inhibit the Hg⁰ removal over Nano-CuS partially because SO₃ oxidized the reduced sulfur species (sulfide) with high affinity to mercury to its oxidized sulfur species (sulfate). Moreover, a brand new "oxidation-reduction" mechanism that led to a simultaneous oxidation of sulfide and reduction of mercury on the immobilized mercury sulfide (HgS) was responsible for the inhibitory effect. Even though the released Hg⁰ from the reduction of mercury in HgS could be oxidized by SO₃ into its sulfate form (HgSO₄) and recaptured by the sorbent, the "oxidation-reduction" mechanism still compromised the Hg⁰ capture performance of the Nano-CuS because HgSO₄ deposited on the sorbent surface could be easily leached out when environmentally exposed. These new insights into the role of SO₃ in Hg⁰ capture over Nano-CuS can help to determine possible solutions and facilitate the application of mineral sulfide sorbents as outstanding alternatives to activated carbons for Hg⁰ immobilization in industrial flue gas.

Novel alginate/polyethyleneimine hydrogel adsorbent for cascaded removal and utilization of Cu2+ and Pb2+ ions

Heavy metal ion pollution leads to severe health risk to human beings. Herein, a natural and highly efficient sodium alginate (ALG)/polyethyleneimine (PEI) composite hydrogel was designed and fabricated for the removal of heavy metal ions from wastewater. The adsorption of heavy metal ions on the ALG based, 3D composite hydrogel were thoroughly investigated in this study. Furthermore, the in situ reduced metal nanoparticle-loaded ALG/PEI composite hydrogel provided us a sustainable utilization route of the heavy metal ion with a promising adsorption-catalysis ability. In general, this research will present an effective and practical paradigm for the cascaded treatment and recycling of heavy metal ions in wastewater.

Nonoxidative Dehydrogenation of Methanol to Methyl Formate through Highly Stable and Reusable CuMgO-Based Catalysts

Nonoxidative dehydrogenation of methanol to methyl formate over a CuMgO-based catalyst was investigated. Although the active site is metallic copper (Cu⁰), the best reaction conditions were obtained by tuning the ratio of Cu/Mg and doping the catalyst with 1 wt % of Pd to achieve a very specific activity for methyl formate synthesis. On the basis of the CO₂ temperature-programmed desorption study, the basic strength of the catalyst plays a role in the efficient conversion of methanol to methyl formate via dehydrogenation. These CuMgO-based catalysts show excellent thermal stability during the reaction and the regeneration processes. Approx. 80% methanol conversion with constant selectivity to methyl formate was achieved even after 4 rounds of usage for a total reaction time exceeding 200 h, indicative of their potential for practical applications.

Direct chemical vapor deposition synthesis of large area single-layer brominated graphene

Graphene and its derivatives such as functionalized graphene are considered to hold significant promise in numerous applications. Within that context, halogen functionalization is exciting for radical and nucleophilic substitution reactions as well as for the grafting of organic moieties. Historically, the successful covalent doping of sp² carbon with halogens, such as bromine, was demonstrated with carbon nanotubes. However, the direct synthesis of brominated graphene has thus far remained elusive. In this study we show how large area brominated graphene with C–Br bonds can be achieved directly (i.e. a single step) using hydrogen rich low pressure chemical vapor deposition. The direct synthesis of brominated graphene could lead to practical developments.

In this study we present the first direct synthesis of large area, single layer, crystalline graphene with covalently doped bromine.

Mechanochemical synthesis of Si/Cu3Si-based composite as negative electrode materials for lithium ion battery

Mechanochemical synthesis of Si/Cu₃Si-based composite as negative electrode materials for lithium ion battery is investigated. Results indicate that CuO is decomposed and alloyed with Si forming amorphous Cu-Si solid solution due to high energy impacting during high energy mechanical milling (HEMM). Upon carbonization at 800 °C, heating energy induces Cu₃Si to crystallize in nanocrystalline/amorphous Si-rich matrix enhancing composite rigidity and conductivity. In addition, residual carbon formed on outside surface of composite powder as a buff space further alleviates volume change upon lithiation/delithiation. Thus, coin cell made of C-coated Si/Cu₃Si-based composite as negative electrode (active materials loading, 2.3 mg cm⁻²) conducted at 100 mA g⁻¹ performs the initial charge capacity of 1812 mAh g⁻¹ (4.08 mAh cm⁻²) columbic efficiency of 83.7% and retained charge capacity of 1470 mAh g⁻¹ (3.31 mAh cm⁻²) at the end of the 100^th cycle, opening a promised window as negative electrode materials for lithium ion batteries.

One-Dimensional Cu2- xSe Nanorods as the Cathode Material for High-Performance Aluminum-Ion Battery

In this work, nonstoichiometric Cu_{2- x}Se fabricated by a facile water evaporation process is used as high-performance Al-ion battery cathode materials. Cu_{2- x}Se electrodes show high reversible capacity and excellent cycling stability, even at a high current density of 200 mA g^-1, the specific charge capacity in the initial cycle is 241 mA h g^-1 and maintains 100 mA h g^-1 after 100 cycles with a Coulombic efficiency of 96.1%, showing good capacity retention. The prominent kinetics of Cu_{2- x}Se electrodes is also revealed by the GITT, which is attributed to the ultrahigh electronic conductivity of the Cu_{2- x}Se material. Most importantly, an extensive research is dedicated to investigating the detailed intercalation and de-intercalation of relatively large chloroaluminate anions into the cubic Cu_{2- x}Se, which is conducive to better understand the reaction mechanism of the Al/Cu_{2- x}Se battery.

Adsorption and protective behavior of BTAH on the initial atmospheric corrosion process of copper under thin film of chloride solutions

The initial corrosion process of copper and the corrosion resistance mechanism of Benzotriazole under chloride-containing thin electrolyte layer (TEL) was investigated. After theoretical calculation and experimental characterization, the forming process of [Cu(I)BTA]_n film was chemically adsorbed on copper surface by Cu-N bond tightly; corrosion rate increased as TEL thickness decreased. Whilst, energy distribution plot of electrochemical noise provided the validity of corrosion type, and the purported corrosion energy (E_c) deduced from electrochemical noise was approximately proportion to corrosion rate (1/R_ct) with and without the anticorrosion film, which denoted the feasibility to determine corrosion rate by nondestructive on-line monitoring electrochemical noise progress.

The study on continuous denitrification, desulfurization of pyrolusite/activated coke hybrid catalyst

The SO₂ removal and regeneration of ACP improved its NO removal activity, while the denitrification had almost no effect on the desulfurization. The metal sulfate of ACP-Rn showed catalytic activity for NO reduction although there is also a reverse effect.

Strontium Titanate Based Artificial Leaf Loaded with Reduction and Oxidation Cocatalysts for Selective CO2 Reduction Using Water as an Electron Donor

Thin film of SrTiO₃ nanorods loaded with reduction and oxidation cocatalysts drove the selective reduction of carbon dioxide (CO₂) into carbon monoxide (CO), as well as caused the production of equivalent oxygen molecules through water oxidation under UV irradiation. The described film functioned as a free-standing plate without any bias potential application, similar to a natural leaf. The film was facilely fabricated by a simple hydrothermal and annealing treatment of a titanium substrate to produce the SrTiO₃ nanorod film (STO film) followed by two steps of loading the reduction and oxidation cocatalysts onto the surface of the STO. As a reduction cocatalyst, a Cu_xO nanocluster was chosen to achieve selective reduction of CO₂ into CO, whereas a cobalt- and phosphate-based cocatalyst (CoPi) facilitated oxidation on the STO surface to promote oxygen generation. For the photocatalysis test, a wireless film was simply set into an aqueous solution bubbled with CO₂ in a reactor, and CO production was observed in the headspace of the reactor under UV irradiation. Compared to the bare STO film, the dual cocatalyst-loaded STO film exhibited 2.5 times higher CO generation. H₂ production was very limited in our system, and the amount of molecules generated by the reduction reaction was almost twice that of the generated oxygen molecules, proving that water molecules acted as electron donors. Our artificial leaf consists of abundant and nontoxic natural elements and represents the first achievement of stoichiometric CO₂ reduction using water as an electron donor by a free-standing natural leaflike plate form.

Coordination Nanosheets Based on Terpyridine-Zinc(II) Complexes: As Photoactive Host Materials

Photoluminescent coordination nanosheets (CONASHs) comprising three-way terpyridine (tpy) ligands and zinc(II) ions are created by allowing the two constitutive components to react with each other at a liquid/liquid interface. Taking advantage of bottom-up CONASHs, or flexibility in organic ligand design and coordination modes, we demonstrate the diversity of the tpy-zinc(II) CONASH in structures and photofunctions. A combination of 1,3,5-tris[4-(4'-2,2':6',2″-terpyridyl)phenyl]benzene (1) and Zn(BF₄)₂ affords a cationic CONASH featuring the bis(tpy)Zn complex motif (1-Zn), while substitution of the zinc source with ZnSO₄ realizes a charge-neutral CONASH with the [Zn₂(μ-O₂SO₂)₂(tpy)₂] motif [1-Zn₂(SO₄)₂]. The difference stems from the use of noncoordinating (BF₄^-) or coordinating and bridging (SO₄^2-) anions. The change in the coordination mode alters the luminescence (480 nm blue in 1-Zn; 552 nm yellow in 1-Zn₂(SO₄)₂). The photophysical property also differs in that 1-Zn₂(SO₄)₂ shows solvatoluminochromism, whereas 1-Zn does not. Photoluminescence is also modulated by the tpy ligand structure. 2-Zn contains triarylamine-centered terpyridine ligand 2 and features the bis(tpy)Zn motif; its emission is substantially red-shifted (590 nm orange) compared with that of 1-Zn. CONASHs 1-Zn and 2-Zn possess cationic nanosheet frameworks with counteranions (BF₄^-), and thereby feature anion exchange capacities. Indeed, anionic xanthene dyes were taken up by these nanosheets, which undergo quasi-quantitative exciton migration from the host CONASH. This series of studies shows tpy-zinc(II) CONASHs as promising potential photofunctional nanomaterials.

Ag2Cu3Cr2O8(OH)4: a new bidimensional silver-copper mixed-oxyhydroxide with in-plane ferromagnetic coupling

Ag₂Cu₃Cr₂O₈(OH)₄, a new Ag-Cu-Cr-O layered mixed oxide, prepared by soft hydrothermal heterogeneous reactions, is reported. The new phase is an oxyhydroxide and presents a structure with alternating brucite-like Cu-O and Ag-O layers connected by individual chromate groups. The crystallographic structure has been solved and refined from high resolution powder X-ray diffraction data and is supported by density functional theory calculations, yielding a triclinic, space group P1[combining macron], a = 5.3329(1) Å, b = 5.3871(1) Å, c = 10.0735(1) Å, α = 80.476(1)°, β = 87.020(1)°, γ = 62.383(1)°. Bond valence sums suggest the formulation of Ag⁺₂Cu²⁺₃Cr⁶⁺₂O₈(OH)₄, an electronic state fully supported by X-ray photoelectron spectroscopy (XPS) and Cr K-edge X-ray absorption near edge structure (XANES) measurements. Ag₂Cu₃Cr₂O₈(OH)₄ exhibits bidimensional Cu-O-Cu ferromagnetic correlations that are apparent at much higher temperatures than in other similar Cu-O layered structures, without coupling between Cu-O layers, which represents a unique case in the recent family of silver copper oxides. The role of Ag inducing bidimensionality in copper oxides is therefore expanded further with the presence of chromate anions. Ab initio calculations using density functional theory show that the electronic states involved originate mainly from Cu and OH orbitals, with minor contributions from Cr and the O atoms linking the Cr tetrahedra to the brucitic Cu-O layer, and almost no contribution from Ag. Further modeling of the in-plane magnetic interactions between Cu atoms suggests that the coupled magnetized stripes are responsible for the observed behavior. The results are discussed in relation with previous Ag-Cu mixed oxide phases where metallic behavior or ferro-antiferro transitions had been observed. The structure of this new Ag-Cu-O phase as compared with previous silver copper oxides supports the conclusion that the Ag-Cu layered ordering is favored under oxidizing conditions.

Inverse effects of supporting electrolytes on the electrocatalytic nitrate reduction activities in a Pt|Nafion|Pt–Cu-type reactor assembly

A Pt|Nafion|Pt–Cu assembly can exhibit its best reduction reaction efficiency in the absence of any supporting electrolytes. Adsorption of supporting electrolytes decreases efficiency by registering an increase of charge transfer resistance.