Surface analysis of protein-resistant, plasma-polymerized ethylene glycol thin films

From Basics to Frontiers: A Comprehensive Review of Plasma-Modified and Plasma-Synthesized Polymer Films

This comprehensive review begins by tracing the historical development and progress of cold plasma technology as an innovative approach to polymer engineering. The study emphasizes the versatility of cold plasma derived from a variety of sources including low-pressure glow discharges (e.g., radiofrequency capacitively coupled plasmas) and atmospheric pressure plasmas (e.g., dielectric barrier devices, piezoelectric plasmas). It critically examines key operational parameters such as reduced electric field, pressure, discharge type, gas type and flow rate, substrate temperature, gap, and how these variables affect the properties of the synthesized or modified polymers. This review also discusses the application of cold plasma in polymer surface modification, underscoring how changes in surface properties (e.g., wettability, adhesion, biocompatibility) can be achieved by controlling various surface processes (etching, roughening, crosslinking, functionalization, crystallinity). A detailed examination of Plasma-Enhanced Chemical Vapor Deposition (PECVD) reveals its efficacy in producing thin polymeric films from an array of precursors. Yasuda's models, Rapid Step-Growth Polymerization (RSGP) and Competitive Ablation Polymerization (CAP), are explained as fundamental mechanisms underpinning plasma-assisted deposition and polymerization processes. Then, the wide array of applications of cold plasma technology is explored, from the biomedical field, where it is used in creating smart drug delivery systems and biodegradable polymer implants, to its role in enhancing the performance of membrane-based filtration systems crucial for water purification, gas separation, and energy production. It investigates the potential for improving the properties of bioplastics and the exciting prospects for developing self-healing materials using this technology.

Surface Antifouling Modification on Polyethylene Filtration Membranes by Plasma Polymerization

Surface modification on microporous polyethylene (PE) membranes was facilitated by plasma polymerizing with two hydrophilic precursors: ethylene oxide vinyl ether (EO1V) and diethylene oxide vinyl ether (EO2V) to effectively improve the fouling against mammalian cells (Chinese hamster ovary, CHO cells) and proteins (bovine serum albumin, BSA). The plasma polymerization procedure incorporated uniform and pin-hole free ethylene oxide-containing moieties on the filtration membrane in a dry single-step process. The successful deposition of the plasma polymers was verified by Fourier-transform infrared (FTIR), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) analyses. Water contact angle measurements and permeation experiments using cell and protein solutions were conducted to evaluate the change in hydrophilicity and fouling resistance for filtrating biomolecules. The EO1V and EO2V plasma deposited PE membranes showed about 1.45 fold higher filtration performance than the pristine membrane. Moreover, the flux recovery reached 80% and 90% by using deionized (DI) water and sodium hydroxide (NaOH) solution, indicating the efficacy of the modification and the good reusability of the modified PE membranes.

Surface modification of polystyrene Petri dishes by plasma polymerized 4,7,10-trioxa-1,13-tridecanediamine for enhanced culturing and migration of bovine aortic endothelial cells

Plasma surface modification is an effective method for changing material properties to control cell behavior on a surface. This study investigates the efficiency of a plasma polymerized 4,7,10-trioxa-1,13-tridecanediamine (ppTTDDA) film coated on a polystyrene (PS) Petri dish, which is a biocompatible surface with carbon- and oxygen-based chemical species. The adhesion, proliferation, and migration properties of bovine aortic endothelial cells (BAECs) were profoundly enhanced in the ppTTDDA-coated PS Petri dishes without extracellular matrix (ECM) proteins, when compared with the uncoated PS Petri dishes. These observations indicate that ppTTDDA-coated PS Petri dishes can directly interact with cells, regardless of cell adhesion molecules. The increased cell affinity was attributed to the high concentration of carboxyl group on the surface of the ppTTDDA film. Such a carboxyl surface showed an excellent ability to promote culturing of BAECs. Plasma surface modification techniques are effective in improving biocompatibility and provide a surface environment for cell culture.