Tuning the size and optical properties in molecular nano/microcrystals: manifestation of hierarchical interactions

New Charge Transfer Complexes of Self-Assembled TCNQ Derivatives and Picric Acid: Synthesis, Characterization, Crystallography and Sensing Application

TCNQ derivatives with primary/secondary amines as substituents are commonly known as diaminodicyanoquinodimethanes (DADQs); a D-π-A molecular system, being zwitterionic are generally stable. Facile and simple charge transfer (CT) complexes were achieved by the reaction between 7,7-bis (N,N-dimethylethylenediamino)-8,8-dicyanoquinodimethane (BMEDDQ),7,7-bis (N,N-diethylethylenediamino)-8,8-dicyanoquinodimethane (BDEDDQ) and picric acid (PA) each respectively; resulting in BMEDDQ-PA [1] and BDEDDQ-PA [2], further followed by effortless purification by crystallization. Acquired CT complexes (CTs) [1], [2] were characterized thoroughly by crystallography, spectroscopic and microscopic techniques. Crystallographic investigations revealed extensive H-bonding, π-π stacking, short contacts ( Collapse

Key Words

• Charge transfer complexes
• Crystallography
• Fluorescence quenching
• PA sensing in solutions
• Spectroscopy

Collapse

MESH Headings Collapse

Grants

• Central Analytical Laboratory (CAL)
• SR/FST/CSI-240/2012 DST-FIST
• Department of Chemistry
• BITS-Pilani Hyderabad Campus
• HRMS
• DST-FIST
• SR/FST/CS-I/2020/158
• BITS

Collapse

Affiliation(s)

Anuradha Mohitkar Department of Chemistry, Birla Institute of Technology and Science, Pilani-Hyderabad Campus, Jawahar nagar, Kapra Mandal, Medchal, Malkajgiri District, Hyderabad, 500078, Telangana, India
Jayanty Subbalakshmi Department of Chemistry, Birla Institute of Technology and Science, Pilani-Hyderabad Campus, Jawahar nagar, Kapra Mandal, Medchal, Malkajgiri District, Hyderabad, 500078, Telangana, India

Collapse

Efficient Standalone Flexible Small Molecule Organic Solar Cell Devices: Structure-Performance Relation Among Tetracyanoquinodimethane Derivatives

Currently, very few dicyano and tetracyanoquinodimethane (TCNQ) based molecules are utilized as active layers, sandwiched between the electron and hole transport layer in organic solar cell (OSC) devices. Nevertheless, simple mono- and disubstituted TCNQ derivatives as exclusively active layers are yet unexplored and provide scope for further investigation. In this study, TCNQ derivatives with varying amine substituents, namely, AEPYDQ (1), BMEDDQ (2), MATBTCNQ (3), and MITATCNQ (4), were explored as efficient standalone, flexible, all small molecule OSC devices. Particularly, 1 resulted in the highest device efficiency of 11.75% with an aromatic amine, while 2 possessing an aliphatic amine showed the lowest power conversion efficiency (PCE; 2.12%). Notably, the short circuit current density (JSC) of device 1 increased from 2 mA/cm2 in the dark to 9.12 mA/cm2 under light, indicating a significant boost in the current generation. Further, 1 manifested more crystallinity than others. Interestingly, 4 exhibited a higher PCE (5.90%) than 3 (PCE is 2.58%), though 3 is disubstituted with an aromatic amine, probably attributed to the electron-withdrawing effects of the -CF3 and -CN groups in 3 reducing the available π-electron density for stacking. Therefore, this study emphasizes crystallinity, significantly on the PCE, offering insights into the design of many such efficient OSCs.

Molecular to Supramolecular Self-Assembled Luminogens for Tracking the Intracellular Organelle Dynamics

Deciphering the dynamics of intracellular organelles has gained immense attention due to their subtle control over diverse, complex biological processes such as cellular metabolism, energy homeostasis, and autophagy. In this context, molecular materials, including small-organic fluorescent probes and their supramolecular self-assembled nano-/microarchitectures, have been employed to explore the diverse intracellular biological events. However, only a handful of fluorescent probes and self-assembled emissive structures have been successfully used to track different organelle's movements, circumventing the issues related to water solubility and long-term photostability. Thus, the water-soluble molecular fluorescent probes and the water-dispersible supramolecular self-assemblies have emerged as promising candidates to explore the trafficking of the organelles under diverse physiological conditions. In this review, we have delineated the recent progress of fluorescent probes and their supramolecular self-assemblies for the elucidation of the dynamics of diverse cellular organelles with a special emphasis on lysosomes, lipid droplets, and mitochondria. Recent advancement in fluorescence lifetime and super-resolution microscopy imaging has also been discussed to investigate the dynamics of organelles. In addition, the fabrication of the next-generation molecular to supramolecular self-assembled luminogens for probing the variation of microenvironments during the trafficking process has been outlined.

Unprecedented transformation from cyclized zwitterionic oxazolidine derivatives to corresponding non-zwitterionic aromatic amides via Vilsmeier reagent in a one-pot reaction: optical property and crystallography

In situ formation of iminium intermediate in the conversion of zwitterionic oxazolidine derivatives to aromatic amides resulting in contrasting optical properties.

Simulation of absorption and scattering spectra of crystalline organic nanoparticles with the discrete dipole approximation: Effects of crystal shape, crystal size, and refractive index of the medium

The effect of the shape (habit) of crystalline organic nanoparticles on their absorption spectra is studied by simulations using the discrete dipole approximation, focusing, in particular, on the vibronic structure of the absorption bands in the spectra. Simulations predict a significant effect that, for sufficiently small particles, can be simply rationalized by the depolarization factor. The crystal size and the refractive index of the medium in which the nanoparticles are embedded are also found to have an effect on the absorption spectra. All factors mentioned are found to influence also the spectra of scattered light. These effects, already broadly documented for metallic nanoparticles, are here demonstrated theoretically for the first time for crystalline organic nanoparticles, providing novel insight into the optical response of such particles. The effects are expected to be displayed by all organic nanoparticles, as long as they have a well-defined crystal structure and are large enough for the optical properties to be understandable using a macroscopic dielectric tensor. The effects demonstrated here should be taken into account when rationalizing differences in absorption spectra of a substance in solution and in nanoparticle form, e.g., in deducing the type of intermolecular packing. The effects are much less pronounced for optically isotropic nanoparticles.

7,7-bis(N, N-diethylethylenediamino)-8,8-dicyanoquinodimethane: Effect of Ethyl Moiety on the Photophysical Property besides Thermal Stability

Tetracyanoquinodimethane (TCNQ) on reaction with primary/secondary amines sequels in mono/di-substituted TCNQ adducts known as diaminodicyanoquinodimethanes (DADQ's) possessing astounding optical or non-linear optical characteristics. Crucially, the subtle choice of amine contributes to the outcome of molecular material aspects. Herein, we present a comprehensive investigation of 7,7-bis(N,N-diethylethylenediamino)-8,8-dicyanoquinodimethane (BDEDDQ); manifesting the impact of ethyl group (existing on the di-substituted nitrogen of N,N-diethylethylenediamine (DEED)); on the crystal structure, optical property and thermal stability. Crystallography study revealed supramolecular self-assemblies among molecular dipoles emanating fluorescence enhancement in the solid state compared to solutions. Quantum yields were primarily ~0.2 to 0.4% in solutions and ~56% in the solid. Stokes shift was noticed to be more in solutions (~90 nm) than solid (~67 nm), suggesting excess vibrational relaxations in solutions. Differential scanning calorimetry revealed ~182 °C as the melting temperature. The heat capacity of solid was found to be 5.03 mJs^-1. Thermogravimetric analysis conveyed single stage decomposition process initiated by the two amine side chains. Scanning electron microscopy of films prepared by drop casting solutions imparted divergent morphological features, due to different rates of evaporation accompanied by varied growth kinetics. Accordingly, in this paper we have demonstrated the utilization of simple N,N-diethylethylenediamine (DEED) to successfully generate a noteworthy blue emissive molecular material exhibiting semiconducting feature besides reasonable thermal stability.

Deciphering the evolution of supramolecular nanofibers in solution and solid-state: a combined microscopic and spectroscopic approach

Supramolecular self-assembly of small organic molecules has emerged as a powerful tool to construct well-defined micro- and nanoarchitecture through fine-tuning a range of intermolecular interactions. The size, shape, and optical properties of these nanostructures largely depend on the specific assembly of the molecular building units, temperature and polarity of the medium, and external stimuli. The engineering of supramolecular self-assembled nanostructures with morphology-dependent tunable emission is in high demand due to the promising scope in nanodevices and molecular machines. However, probing the evolution of molecular aggregates from the solution and directing the self-assembly process in a pre-defined fashion are challenging. In the present study, we have deciphered the sequential evolution of supramolecular nanofibers from solution to spherical and oblong-shaped nanoparticles through the variation of solvent polarity, tuning the hydrophobic-hydrophilic interactions. An intriguing case of molecular self-assembly has been elucidated employing a newly designed π-conjugated thiophene derivative (TPAn) through a combination of steady-state absorption, emission measurements, fluorescence correlation spectroscopy (FCS), and electron microscopy. The FCS analysis and microscopy results revealed that the small-sized nanofibers in the dispersion further agglomerated upon solvent evaporation, resulting in a network of nanofibers. Stimuli-responsive reversible interconversion between a network of nanofibers and spherical nanoaggregates was probed both in dispersion and solvent-evaporated state. The evolution of organic nanofibers and a subtle control over the self-assembly process demonstrated in the current investigation provide a general paradigm to correlate the size, shape, and emission properties of fluorescent molecular aggregates in complex heterogeneous media, including a human cell.

Distinct Tetracyanoquinodimethane Derivatives: Enhanced Fluorescence in Solutions and Unprecedented Cation Recognition in the Solid State

Tetracyanoquinodimethane (TCNQ) is known to react with various amines to generate substituted TCNQ derivatives with remarkable optical and nonlinear optical characteristics. The choice of amine plays a crucial role in the outcome of molecular material attributes. Especially, mono/di-substituted TCNQ's possessing strong fluorescence in solutions than solids are deficient. Furthermore, cation recognition in the solid-state TCNQ derivatives is yet undetermined. In this article, we present solution-enhanced fluorescence and exclusive solid-state recognition of K⁺ ion achieved through the selection of 4-(4-aminophenyl)morpholin-3-one (APM) having considerable π-conjugation and carbonyl (C=O) functionality, particularly in the ring. TCNQ when reacted with APM, in a single-step reaction, resulted in two well-defined distinct compounds, namely, 7,7-bis(4-(4-aminophenyl)morpholin-3-ono)dicyanoquinodimethane (BAPMDQ [1], yellow) and 7,7,8-(4-(4-aminophenyl)morpholin-3-ono)tricyanoquinodimethane (APMTQ [2], red), with increased fluorescence intensity in solutions than their solids. Crystal structure investigation revealed extensive C-H-π interactions and strong H-bonding in [1], whereas moderate to weak interactions in [2]. Surprisingly, simple mechanical grinding during KBr pellet preparation with [1, 2] triggered unidentified cation recognition with a profound color change (in ∼1 min) detected by the naked eye, accompanied by a drastic enhancement of fluorescence, proposed due to the presence of carbonyl functionality, noncovalent intermolecular interactions, and molecular assemblies in [1, 2] solids. Cation recognition was also noted with various other salts as well (KCl, KI, KSCN, NH₄Cl, NH₄Br, etc.). Currently, the recognition mechanism of K⁺ ion in [1, 2] is demonstrated by the strong electrostatic interaction of K⁺ ion with CO and simultaneously cation-π interaction of K⁺ with the phenyl ring of APM, supported by experimental and computational studies. Computational analysis also revealed that a strong cation-π interaction occurred between the K⁺ ion and the phenyl ring (APM) in [2] than in [1] (ΔG _binding calculated as ∼16.3 and ∼25.2 kcal mol^-1 for [1] and [2], respectively) providing additional binding free energy. Thus, both electrostatic and cation-π interactions lead to the recognition. Scanning electron microscopy of drop-cast films showed microcrystalline "roses" in [1] and micro/nano "aggregates" in [2]. Optical band gap (∼3.565 eV) indicated [1, 2] as wide-band-gap materials. The current study demonstrates fascinating novel products obtained by single-pot reaction, resulting in contrasting optical properties in solutions and experiencing cation recognition capability exclusively in the solid state.

Regioisomeric monopyridine-functionalized triarylethene: small AIEgens with isomeric effect and an efficient platform for the selective and sensitive detection of Pd2+ and Fe3+

Regioisomeric monopyridine functionalized triarylethenes are established as small AIEgens. These compounds are utilized to detect Fe⁺³ and Pd⁺² selectively in nM range. The detection is further extended for the on-site applications.

Promoting Noncovalent Intermolecular Interactions Using a C60 Core Particle in Aqueous PC60s-Covered Colloids for Ultraefficient Photoinduced Particle Activity

Noncovalent intermolecular interactions in nanomaterials, such as van der Waals effects, allow adjustment of the nanoscopic size of compounds and their conformation in molecular crystal regimes. These strong interactions permit small particle sizes to be maintained as the crystals grow. In particular, these effects can be leveraged in the confined/reinforcing phase of molecules. With this in mind, we used C₆₀ molecules as a core particle in single-PC60 surfactant-covered colloid in a water-processable system. Compared with our previous results based on a PC₆₁BM core-PC60 shell particle, the PC60-C₆₀ colloid had a considerably smaller spherical structure due to the increased intermolecular interactions between C₆₀ (fullerene) molecules. Interestingly, the conformation of C₆₀ aggregates was altered depending on the mixed solvents and their volume fraction in the organic phase, which strongly affected the structural properties of the PC60-C₆₀ colloids. The particle facilitated strong interactions with a p-type core sphere when it was introduced as the shell part of a p-n heterojunction particle. This direct interaction provided effective electronic communication between p- and n-type particles, resulting in ultraefficient photonic properties, particularly in charge separation in aqueous heterostructured colloids. This enabled the development of an extremely efficient photovoltaic device with a 6.74% efficiency, which could provide the basis for creating high-performance water-processable solar cells based on p-n heterostructured NPs.

Probing the Aggregation and Signaling Behavior of Some Twisted 9,9'-Bianthryl Derivatives: Observation of Aggregation-Induced Blue-Shifted Emission

With an aim to understand the photophysical behavior of twisted organic fluorescent molecules in their aggregated state, two twisted biaryl molecules, namely, 9,9'-bianthryl and 10,10'-dicyano-9,9'-bianthryl, have been synthesized and characterized by conventional spectroscopic methods. To understand the role of C-C bond twisting on the photophysical response of biaryl aggregates, monoaryl counterparts (anthracene and 9-anthracenecarbonitrile) of the biaryl systems are also investigated. Photophysical behaviors of these systems along with their monoaryl counterpart are investigated in both solution and aggregated state. Investigations reveal that fluorescence spectra of the biaryl compounds show blue-shifted emission upon aggregation. Interestingly, no blue shift of the emission has been observed for monoaryl aggregates. Photophysical data of biaryl systems compared to monoaryl unit reveal that change in geometry, during self-assembly process, disfavors the formation of charge-transfer state, which eventually causes blue shift in the emission upon aggregation. In addition to this, potential of these systems toward signaling of nitroaromatic explosive has also been explored. Among all of the nitroaromatics, the highest fluorescence quenching is observed for nitrophenols (say picric acid (PA)). The investigation also reveals that compared to monoaryl systems, biaryl systems are more responsive to fluorescence quenching by nitroaromatics. Perrin's model of quenching sphere action has been attributed to nitrophenol (PA) selective signaling behavior of biaryl systems.

Efficient Bioimaging with Diaminodicyanoquinodimethanes: Selective Imaging of Epidermal and Stomatal Cells and Insight into the Molecular Level Interactions

The enhanced fluorescence emission of diaminodicyanoquinodimethanes (DADQs) in rigid and aggregated states holds great promise for bioimaging applications. This is demonstrated through their efficient application in epidermal and stomatal imaging with selective staining of cell walls and nuclei. Major advantages include the small quantities (a few nmols) of the fluorophore required, choice of DADQs soluble in water and organic solvents, and quick staining of the specimen in buffer-free state and in buffer medium. The molecular level interactions that enable staining are unraveled through isothermal calorimetry, infra-red spectroscopy and microscopy with energy dispersive X-ray spectroscopy analysis. It is proposed that DADQs with ionic or H-bonding functionalities bind to the polygalacturonic acid moieties in the epidermal layer; the former can bind also to nucleic acid polyanions. Fluorescence experiments explain the emission enhancement that enables the efficient imaging. DADQs are easy to synthesize, non-cytotoxic, and thermally, chemically and photo-stable, requiring no special storage conditions; preliminary experiments point to their potential utility in imaging different classes of cells.

Tunable solid state emission of novel V-shaped fluorophores by subtle structure modification: polymorphism, mechanofluoro-chromism and micro-fabrication

A largely wide and nearly successive range of solid-state emission wavelengths can be achievedviapolymorphism, mechanofluorochromism and micro-fabrication on rationally designed V-shaped fluorophores with subtle structure modification.

Aggregation induced emission enhancement and growth of naphthalimide nanoribbons via J-aggregation: insight into disaggregation induced unfolding and detection of ferritin at the nanomolar level

A core substituted naphthalimide AIEEgen displays unusual nanoribbon growth in aqueous media with ultra-sensitivity towards non-heme protein ferritin at physiological conditions.

Highly emissive excited-state intramolecular proton transfer (ESIPT) inspired 2-(2′-hydroxy)benzothiazole–fluorene motifs: spectroscopic and photophysical properties investigation

Efficient solid state emission of fluorene–benzothiazole motifs via ESIPT process have been discussed experimentally and theoretically.

Investigating the molecular and aggregated states of a drug molecule rutaecarpine using spectroscopy, microscopy, crystallography and computational studies

The present study demonstrates the aggregation behavior of rutaecarpine and the effect of surface active ionic liquids on the dissociation of the aggregates.

Light-responsive three-dimensional microstructures composed of azobenzene-based palladium complexes

We describe not only fleeting assembly of photoisomerizable azobenzene-based palladium complexes into microstructured crystalline architectures but also their light-responsive functions. A transformation in the crystalline morphology from two-dimensional (2D) parallelogram-like sheets to three-dimensional (3D) cuboid- or rhombus-like structures was achieved by changing the solvent from tetrahydrofuran (THF) to acetone and N,N-dimethylformamide (DMF). The sizes of the structures, ranging from a few hundred nanometers to several hundred micrometers, were also modified by varying the complex concentration. In stark contrast to the very stable 2D sheets in the THF-H2O suspensions, exposure of 3D structures in polar DMF-H2O suspensions to ultraviolet (UV) light led to fast disassembly of the structures into isolated metal complexes and further dissociation of free azobenzene ligands from the complexes. In acetone-H2O suspensions, interestingly, disassembly of 3D cuboid-like structures into isolated complex components occurred upon exposure to UV light without further dissociation of azobenzene ligands from the palladium complexes. Considering the photoisomerization ability of the azobenzene-based palladium complex in common organic solvents, the π-stacking interactions that support 3D structures are likely to be sufficiently weak that they might be broken by the UV-induced trans-to-cis isomerization in more polar solvent mixtures. As a consequence, disassembly proceeded under UV light irradiation. Moreover, the effect of solvent polarity on the UV-assisted dissociation (in DMF-H2O) may be associated with the coordination ability of solvent molecules with the metal center.

Microfluidic and lab-on-a-chip preparation routes for organic nanoparticles and vesicular systems for nanomedicine applications

In recent years, advancements in the fields of microfluidic and lab-on-a-chip technologies have provided unique opportunities for the implementation of nanomaterial production processes owing to the miniaturisation of the fluidic environment. It has been demonstrated that microfluidic reactors offer a range of advantages compared to conventional batch reactors, including improved controllability and uniformity of nanomaterial characteristics. In addition, the fast mixing achieved within microchannels, and the predictability of the laminar flow conditions, can be leveraged to investigate the nanomaterial formation dynamics. In this article recent developments in the field of microfluidic production of nanomaterials for drug delivery applications are reviewed. The features that make microfluidic reactors a suitable technological platform are discussed in terms of controllability of nanomaterials production. An overview of the various strategies developed for the production of organic nanoparticles and colloidal assemblies is presented, focusing on those nanomaterials that could have an impact on nanomedicine field such as drug nanoparticles, polymeric micelles, liposomes, polymersomes, polyplexes and hybrid nanoparticles. The effect of microfluidic environment on nanomaterials formation dynamics, as well as the use of microdevices as tools for nanomaterial investigation is also discussed.

Nanocrystalline p-hydroxyacetanilide (paracetamol) and gold core-shell structure as a model drug deliverable organic-inorganic hybrid nanostructure

We report on the generation of core-shell nanoparticles (NPs) having an organic nanocrystal (NC) core coated with an inorganic metallic shell, being dispersed in aqueous medium. First, NCs of p-hydroxyacetanilide (pHA)--known also as paracetamol--were generated in an aqueous medium. Transmission electron microscopy (TEM) and powder X-ray diffraction (XRD) evidenced the formation of pHA NCs and of their crystalline nature. The NCs were then coated with Au to form pHA@Au core-shell NPs, where the thickness of the Au shell was on the order of nanometers. The formation of Au nanoshell--surrounding pHA NC--was confirmed from its surface plasmon resonance (SPR) band in the UV/Vis spectrum and by TEM measurements. Further, on treatment of the core-shell particles with a solution comprising NaCl and HCl (pH < 3), the Au shell could be dissolved, subsequently releasing pHA molecules. The dissolution of Au shell was marked by a gradual diminishing of its SPR band, while the release of pHA molecules in the solution was confirmed from TEM and FTIR studies. The findings suggest that the core-shell NP could be hypothesized to be a model for encapsulating drug molecules, in their crystalline forms, for slow as well as targeted release.

Optical materials based on molecular nanoparticles

A major part of contemporary nanomaterials research is focused on metal and semiconductor nanoparticles, constituted of extended lattices of atoms or ions. Molecular nanoparticles assembled from small molecules through non-covalent interactions are relatively less explored but equally fascinating materials. Their unique and versatile characteristics have attracted considerable attention in recent years, establishing their identity and status as a novel class of nanomaterials. Optical characteristics of molecular nanoparticles capture the essence of their nanoscale features and form the basis of a variety of applications. This review describes the advances made in the field of fabrication of molecular nanoparticles, the wide spectrum of their optical and nonlinear optical characteristics and explorations of the potential applications that exploit their unique optical attributes.

Stable water-dispersed organic nanoparticles: preparation, optical properties, and cell imaging application

Water-dispersed organic nanoparticles (NPs) constructed by the conjugated molecule 2,5,2',5'-tetra(4'-N,N-diphenylaminostyryl)biphenyl (DPA-TSB) with a high luminescence and large two-photon absorption (TPA) section were fabricated via the reprecipitation method. The average size of the NPs can be controlled from 40 nm to 80 nm by adjusting the reprecipitation conditions. The NPs in water dispersions showed high aggregative and optical stability, which were due to contributions from the special cruciform configuration and amorphous nature of DPA-TSB molecules. The cellular uptake behavior of DPA-TSB NPs was investigated to show their cell staining capabilities as nanoprobes using a confocal microscopy test in vitro. The results demonstrated that DPA-TSB NPs were readily internalized into cytoplasm with no apparent toxicity for up to 24 h, implying excellent imaging capabilities.

Polyelectrolyte-assisted formation of molecular nanoparticles exhibiting strongly enhanced fluorescence

A polyelectrolyte-assisted reprecipitation method is developed to fabricate nanoparticles of highly soluble molecules. The approach is demonstrated by using a zwitterionic diaminodicyanoquinodimethane molecule bearing remote ammonium functionalities with high solubility in water as well as organic solvents. Nanoparticles are prepared by injecting aqueous solutions of this compound containing an optimum concentration of sodium poly(styrenesulfonate) into methanol. The strong fluorescence exhibited by the compound in the aggregated state is reflected in the enhanced fluorescence of the polyelectrolyte complex in water. The nanoparticles formed in the colloidal state manifest even stronger fluorescence, which leads to an overall enhancement by about 90 times relative to aqueous solutions of the pure compound. The conditions for achieving the emission enhancement are optimized and a model for the molecular-level interactions and aggregation effects is developed through a range of spectroscopy, microscopy, and calorimetry investigations and control experiments.

Laser fabrication and spectroscopy of organic nanoparticles

In working with nanoparticles, researchers still face two fundamental challenges: how to fabricate the nanoparticles with controlled size and shape and how to characterize them. In this Account, we describe recent advances in laser technology both for the synthesis of organic nanoparticles and for their analysis by single nanoparticle spectroscopy. Laser ablation of organic microcrystalline powders in a poor solvent has opened new horizons for the synthesis of nanoparticles because the powder sample is converted directly into a stable colloidal solution without additives and chemicals. By tuning laser wavelength, pulse width, laser fluence, and total shot number, we could control the size and phase of the nanoparticles. For example, we describe nanoparticle formation of quinacridone, a well-known red pigment, in water. By modifying the length of time that the sample is excited by the laser, we could control the particle size (30-120 nm) for nanosecond excitation down to 13 nm for femtosecond irradiation. We prepared beta- and gamma-phase nanoparticles from the microcrystal with beta-phase by changing laser wavelength and fluence. We present further results from nanoparticles produced from several dyes, C(60), and an anticancer drug. All the prepared colloidal solutions were transparent and highly dispersive. Such materials could be used for nanoscale device development and for biomedical and environmental applications. We also demonstrated the utility of single nanoparticle spectroscopic analysis in the characterization of organic nanoparticles. The optical properties of these organic nanoparticles depend on their size within the range from a few tens to a few hundred nanometers. We observed perylene nanoscrystals using single-particle spectroscopy coupled with atomic force microscopy. Based on these experiments, we proposed empirical equations explaining their size-dependent fluorescence spectra. We attribute the size effect to the change in elastic properties of the nanocrystal. Based on the results for nanoparticles of polymers and other molecules with flexible conformations, we assert that size-dependent optical properties are common for organic nanoparticles. While "electronic confinement" explains the size-dependent properties of inorganic nanoparticles, we propose "structural confinement" as an analogous paradigm for organic nanoparticles.

Colloid Chemical Reaction Route to the Preparation of Nearly Monodispersed Perylene Nanoparticles: Size-Tunable Synthesis and Three-Dimensional Self-Organization

By employing a colloid chemical reaction method we demonstrate the preparation of organic nanoparticles composed of perylene molecules (PeNPs) based on the reduction of perylene perchlorate by Br- anions in the presence of cetyl trimethyl ammonium bromide (CTA+Br-) in acetonitrile. A discrete nucleation event, followed by a slower controlled growth on the existing particles, is identified during formation of PeNPs. By changing the growth parameters, such as the monomer concentration and the method of injection, quasi-spherical PeNPs with controllable sizes from 25 to 90 nm could be obtained. The homogeneous solution phase of this method makes it capable of large-scale synthesis of PeNPs with a size distribution (<10%) that is improved by formation of a protective layer of CTA+ around the PeNPs. The three-dimensional, hierarchical self-organization of 25-nm PeNPs building blocks is observed to form nanobelts and square nanorods, possibly templated by the CTA+ lamellar micelle structures in acetonitrile. Spectroscopic results reveal two kinds of trends in the development of the optical properties of perylene as they evolve from the molecular to the bulk phase in the nanometer range. The so-called size dependence is evidenced by a switch from Y-type to E-type excimers as the size of the PeNPs increased from 25 to 90 nm. As the 25-nm PeNPs organize into nanobelts or square nanorods the oscillator strength of the Y-type excimers is relatively enhanced. That is, collective phenomena develop as the proximal particles interact in the glassy solids. Our very recent results indicate that this colloid chemical reaction method can also be applied to other organic compounds.

Distinct nanostructures from isomeric molecules of bis(iminopyrrole) benzenes: effects of molecular structures on nanostructural morphologies

The effects of molecular structures on nanostructural morphologies have been studied through the preparation of nanospheres, square nanowires, and nanocubes from three isomeric molecules of bis(iminopyrrole)benzene.