Flossing DNA in a Dual Nanopore Device

Nanopore DNA sequencing technologies and their applications towards single-molecule proteomics

Sequencing of nucleic acids with nanopores has emerged as a powerful tool offering rapid readout, high accuracy, low cost and portability. This label-free method for sequencing at the single-molecule level is an achievement on its own. However, nanopores also show promise for the technologically even more challenging sequencing of polypeptides, something that could considerably benefit biological discovery, clinical diagnostics and homeland security, as current techniques lack portability and speed. Here we survey the biochemical innovations underpinning commercial and academic nanopore DNA/RNA sequencing techniques, and explore how these advances can fuel developments in future protein sequencing with nanopores.

DNA Barcodes Using a Dual Nanopore Device

We report a novel method based on the current blockade (CB) characteristics obtained from a dual nanopore device that can determine DNA barcodes with near-perfect accuracy using a Brownian dynamics simulation strategy. The method supersedes our previously reported velocity correction algorithm (S. Seth and A. Bhattacharya, RSC Advances, 11:20781-20787, 2021), taking advantage of the better measurement of the time-of-flight (TOF) protocol offered by the dual nanopore setup. We demonstrate the efficacy of the method by comparing our simulation data from a coarse-grained model of a polymer chain consisting of 2048 excluded volume beads of diameter 𝜎 = 24 bp using with those obtained from experimental CB data from a 48,500 bp λ-phage DNA, providing a 48500 2400 ≅ 24 base pair resolution in simulation. The simulation time scale is compared to the experimental time scale by matching the simulated time-of-flight (TOF) velocity distributions with those obtained experimentally (Rand et al., ACS Nano, 16:5258-5273, 2022). We then use the evolving coordinates of the dsDNA and the molecular features to reconstruct the current blockade characteristics on the fly using a volumetric model based on the effective van der Waal radii of the species inside and in the immediate vicinity of the pore. Our BD simulation mimics the control-zoom-in-logic to understand the origin of the TOF distributions due to the relaxation of the out-of-equilibrium conformations followed by a reversal of the electric fields. The simulation algorithm is quite general and can be applied to differentiate DNA barcodes from different species.

DNA Carrier-Assisted Molecular Ping-Pong in an Asymmetric Nanopore

Nanopore analysis relies on ensemble averaging of translocation signals obtained from numerous molecules, requiring a relatively high sample concentration and a long turnaround time from the sample to results. The recapture and subsequent re-reading of the same molecule is a promising alternative that enriches the signal information from a single molecule. Here, we describe how an asymmetric nanopore improves molecular ping-pong by promoting the recapture of the molecule in the trans reservoir. We also demonstrate that the molecular recapture could be improved by linking the target molecule to a long DNA carrier to reduce the diffusion, thereby achieving over 100 recapture events. Using this ping-pong methodology, we demonstrate its use in accurately resolving nanostructure motifs along a DNA scaffold through repeated detection. Our method offers novel insights into the control of DNA polymer dynamics within nanopore confinement and opens avenues for the development of a high-fidelity DNA detection platform.

Solid-State Quad-Nanopore Array for High-Resolution Single-Molecule Analysis and Discrimination

The ability to detect and distinguish biomolecules at the single-molecule level is at the forefront of today's biomedicine and analytical chemistry research. Increasing the dwell time of individual biomolecules in the sensing spot can greatly enhance the sensitivity of single-molecule methods. This is particularly important in solid-state nanopore sensing, where the detection of small molecules is often limited by the transit dwell time and insufficient temporal resolution. Here, a quad-nanopore is introduced, a square array of four nanopores (with a space interval of 30-50 nm) to improve the detection sensitivity through electric field manipulation in the access region. It is shown that dwell times of short DNA strands (200 bp) are prolonged in quad-nanopores as compared to single nanopores of the same diameter. The dependence of dwell times on the quad-pore spacing is investigated and it is found that the "retarding effect" increases with decreasing space intervals. Furthermore, ultra-short DNA (50 bp) detection is demonstrated using a 10 nm diameter quad-nanopore array, which is hardly detected by a single nanopore. Finally, the general utility of quad-nanopores has been verified by successful discrimination of two kinds of small molecules, metal-organic cage and bovine serum albumin (BSA).

Two Detection Modes of Nanoslit Sensing Based on Planar Heterostructure of Graphene/Hexagonal Boron Nitride

Solid-state nanopore sequencing is now confronted with problems of stochastic pore clogging and too fast speed during the DNA permeation through a nanopore, although this technique is revolutionary with long readability and high efficiency. These two problems are related to controlling molecular transportation during sequencing. To control the DNA motion and identify the four bases, we propose nanoslit sensing based on the planar heterostructure of two-dimensional graphene and hexagonal boron nitride. Molecular dynamics simulations are performed on investigating the motion of DNA molecules on the heterostructure with a nanoslit sensor. Results show that the DNA molecules are confined within the hexagonal boron nitride (HBN) domain of the heterostructure. And the confinement effects of the heterostructure can be optimized by tailoring the stripe length. Besides, there are two ways of DNA permeation through nanoslits: the DNA can cross or translocate the nanoslit under applied voltages along the y and z directions. The two detection modes are named cross-slit and trans-slit, respectively. In both modes, the ionic current drops can be observed when the nanoslit is occupied by the DNA. And the ionic currents and dwell times can be simultaneously detected to identify the four different DNA bases. This study can shed light on the sensing mechanism based on the nanoslit sensor of a planar heterostructure and provide theoretical guidance on designing devices controlling molecular transportation during nanopore sequencing.

Discriminating protein tags on a dsDNA construct using a Dual Nanopore Device

We report Brownian dynamics simulation results with the specific goal to identify key parameters controlling the experimentally measurable characteristics of protein tags on a dsDNA construct translocating through a double nanopore setup. First, we validate the simulation scheme in silico by reproducing and explaining the physical origin of the asymmetric experimental dwell time distributions of the oligonucleotide flap markers on a 48 kbp long dsDNA at the left and the right pore. We study the effect of the electric field inside and beyond the pores, critical to discriminate the protein tags based on their effective charges and masses revealed through a generic power-law dependence of the average dwell time at each pore. The simulation protocols monitor piecewise dynamics at a sub-nanometer length scale and explain the disparate velocity using the concepts of nonequilibrium tension propagation theory. We further justify the model and the chosen simulation parameters by calculating the Péclet number which is in close agreement with the experiment. We demonstrate that our carefully chosen simulation strategies can serve as a powerful tool to discriminate different types of neutral and charged tags of different origins on a dsDNA construct in terms of their physical characteristics and can provide insights to increase both the efficiency and accuracy of an experimental dual-nanopore setup.

How capture affects polymer translocation in a solitary nanopore

DNA capture with high fidelity is an essential part of nanopore translocation. We report several important aspects of the capture process and subsequent translocation of a model DNA polymer through a solid-state nanopore in the presence of an extended electric field using the Brownian dynamics simulation that enables us to record statistics of the conformations at every stage of the translocation process. By releasing the equilibrated DNAs from different equipotentials, we observe that the capture time distribution depends on the initial starting point and follows a Poisson process. The field gradient elongates the DNA on its way toward the nanopore and favors a successful translocation even after multiple failed threading attempts. Even in the limit of an extremely narrow pore, a fully flexible chain has a finite probability of hairpin-loop capture, while this probability decreases for a stiffer chain and promotes single file translocation. Our in silico studies identify and differentiate characteristic distributions of the mean first passage time due to single file translocation from those due to translocation of different types of folds and provide direct evidence of the interpretation of the experimentally observed folds [M. Gershow and J. A. Golovchenko, Nat. Nanotechnol. 2, 775 (2007) and Mihovilovic et al., Phys. Rev. Lett. 110, 028102 (2013)] in a solitary nanopore. Finally, we show a new finding—that a charged tag attached at the 5′ end of the DNA enhances both the multi-scan rate and the uni-directional translocation (5′ → 3′) probability that would benefit the genomic barcoding and sequencing experiments.

Electronic Mapping of a Bacterial Genome with Dual Solid-State Nanopores and Active Single-Molecule Control

We present an electronic mapping of a bacterial genome using solid-state nanopore technology. A dual-nanopore architecture and active control logic are used to produce single-molecule data that enables estimation of distances between physical tags installed at sequence motifs within double-stranded DNA. Previously developed "DNA flossing" control logic generates multiple scans of each captured DNA. We extended this logic in two ways: first, to automate "zooming out" on each molecule to progressively increase the number of tags scanned during flossing, and second, to automate recapture of a molecule that exited flossing to enable interrogation of the same and/or different regions of the molecule. Custom analysis methods were developed to produce consensus alignments from each multiscan event. The combined multiscanning and multicapture method was applied to the challenge of mapping from a heterogeneous mixture of single-molecule fragments that make up the Escherichia coli (E. coli) chromosome. Coverage of 3.1× across 2355 resolvable sites of the E. coli genome was achieved after 5.6 h of recording time. The recapture method showed a 38% increase in the merged-event alignment length compared to single-scan alignments. The observed intertag resolution was 150 bp in engineered DNA molecules and 166 bp natively within fragments of E. coli DNA, with detection of 133 intersite intervals shorter than 200 bp in the E. coli reference map. We present results on estimating distances in repetitive regions of the E. coli genome. With an appropriately designed array, higher throughput implementations could enable human-sized genome and epigenome mapping applications.

Ion Transport in pH-Regulated Double-Barreled Nanopores

Single-molecule detection and characterization with nanopores is a powerful technique that does not require labeling. Multinanopore systems, especially double nanopores, have attracted wide attention and have been applied in many fields. However, theoretical studies of electrokinetic ion transport in nanopores mainly focus on single nanopores. In this paper, for the first time, a theoretical study of pH-regulated double-barreled nanopores is conducted using three-dimensional Poisson-Nernst-Planck equations and Navier-Stokes equations. Four ionic species and the surface chemistry on the walls of the nanopores are included. The results demonstrate that the properties of the bulk salt solution significantly affect nanopore conductivity and ion transport phenomena in nanopores. There are two ion-enriched zones and two ion-depleted zones in double-barreled nanopores. Due to the symmetry of the double-barreled nanopore structure and surface charge density, there is no ionic rectification effect in double-barreled nanopores. The ion selectivity is similar to that of conventional single pH-regulated nanopores.

Label-Free Identification of Single Mononucleotides by Nanoscale Electrophoresis

Nanoscale electrophoresis allows for unique separations of single molecules, such as DNA/RNA nucleobases, and thus has the potential to be used as single molecular sensors for exonuclease sequencing. For this to be envisioned, label-free detection of the nucleotides to determine their electrophoretic mobility (i.e., time-of-flight, TOF) for highly accurate identification must be realized. Here, for the first time a novel nanosensor is shown that allows discriminating four 2-deoxyribonucleoside 5'-monophosphates, dNMPs, molecules in a label-free manner by nanoscale electrophoresis. This is made possible by positioning two sub-10 nm in-plane pores at both ends of a nanochannel column used for nanoscale electrophoresis and measuring the longitudinal transient current during translocation of the molecules. The dual nanopore TOF sensor with 0.5, 1, and 5 µm long nanochannel column lengths discriminates different dNMPs with a mean accuracy of 55, 66, and 94%, respectively. This nanosensor format can broadly be applicable to label-free detection and discrimination of other single molecules, vesicles, and particles by changing the dimensions of the nanochannel column and in-plane nanopores and integrating different pre- and postprocessing units to the nanosensor. This is simple to accomplish because the nanosensor is contained within a fluidic network made in plastic via replication.

Devices for Nanoscale Guiding of DNA through a 2D Nanopore

We fabricate on-chip solid-state nanofluidic-2D nanopore systems that can limit the range of motion for DNA in the sensing region of a nanopore. We do so by creating devices containing one or more silicon nitride pores and silicon nitride pillars supporting a 2D pore that orient DNA within a nanopore device to a restricted geometry, yet allow the free motion of ions to maintain a high signal-to-noise ratio. We discuss two concepts with two and three independent electrical connections and corresponding nanopore chip device architectures to achieve this goal in practice. Here, we describe device fabrication and transmission electron microscope (TEM) images, and provide simulated translocations based on the finite element analysis in 3D to demonstrate its merit. In both methods, there is a main 2D nanopore which we refer to as a "sensing" nanopore (monolayer MoS₂ in this paper). A secondary layer is either an array of guiding pores sharing the same electrode pair as the sensing pore (Method 1) or a single, independently contacted, guiding pore (Method 2). These pores are constructed parallel to the "sensing" pore and serve as "guiding" elements to stretch and feed DNA into the atomically thin sensing pore. We discuss the practical implementation of these concepts with nanofluidic and Si-based technology, including detailed fabrication steps and challenges involved for DNA applications in solution.

A general theory of polymer ejection tested in a quasi two-dimensional space

A general ejection theory of polymer is developed in a two- and three-dimensional space. A polymer is confined initially in a cavity and ejects spontaneously to the outer space through a nanopore channel without the help of any external stimulus. A reflective wall boundary is set at the pore entrance to prevent the falling of the head monomer of chain into the cavity. Three stages are distinguished in a process: (1) an entering stage, in which the head monomer enters the pore to search for a way to traverse the pore channel, (2) a main ejection stage, in which the chain body is transported from the cavity to the outer space, (3) a leaving stage, in which the tail monomer passes through and leaves the pore channel. Depending on the number of the monomers remaining in the cavity, the main ejection stage can be divided into the confined and the non-confined stages. The non-confined stage can be further split into the thermal escape and the entropic pulling stages. The Onsager’s variational principle is applied to derive the kinetics equation of ejection. The escape time is calculated from the corresponding Kramers’ escape problem. Extensive molecular dynamics simulations are then performed in a quasi two-dimensional space to verify the theory. The variation of the ejection speed is carefully examined. The decreasing behavior of the number of monomers in the cavity is studied in details. The scaling properties of the spending time at each processing stage are investigated systematically by varying the chain length, the cavity diameter, and the initial volume fraction of chain. The results of simulation support firmly the predictions of the theory, cross-checked in the studies of various topics. In combining with the previous investigations in the three-dimensional space, the generalized theory is very robust, able to explain the two seemly different phenomena, polymer ejection and polymer translocation, together under the same theoretical framework in the two space dimensions.

Engineering adjustable two-pore devices for parallel ion transport and DNA translocations

We report ionic current and double-stranded DNA (dsDNA) translocation measurements through solid-state membranes with two TEM-drilled ∼3-nm diameter silicon nitride nanopores in parallel. Nanopores are fabricated with similar diameters but varying in effective thicknesses (from 2.6 to 10 nm) ranging from a thickness ratio of 1:1 to 1:3.75, producing distinct conductance levels. This was made possible by locally thinning the silicon nitride membrane to shape the desired topography with nanoscale precision using electron beam lithography (EBL). Two nanopores are engineered and subsequently drilled in either the EBL-thinned or the surrounding membrane region. By designing the interpore separation a few orders of magnitude larger than the pore diameter (e.g., ∼900 vs 3 nm), we show analytically, numerically, and experimentally that the total conductance of the two pores is the sum of the individual pore conductances. For a two-pore device with similar diameters yet thicknesses in the ratio of 1:3, a ratio of ∼1:2.2 in open-pore conductances and translocation current signals is expected, as if they were measured independently. Introducing dsDNA as analytes to both pores simultaneously, we detect more than 12 000 events within 2 min and trace them back with a high likelihood to which pore the dsDNA translocated through. Moreover, we monitor translocations through one active pore only when the other pore is clogged. This work demonstrates how two-pore devices can fundamentally open up a parallel translocation reading system for solid-state nanopores. This approach could be creatively generalized to more pores with desired parameters given a sufficient signal-to-noise ratio.

DNA barcode by flossing through a cylindrical nanopore

We report an accurate method to determine DNA barcodes from the dwell time measurement of protein tags (barcodes) along the DNA backbone using Brownian dynamics simulation of a model DNA and use a recursive theoretical scheme which improves the measurements to almost 100% accuracy. The heavier protein tags along the DNA backbone introduce a large speed variation in the chain that can be understood using the idea of non-equilibrium tension propagation theory. However, from an initial rough characterization of velocities into “fast” (nucleotides) and “slow” (protein tags) domains, we introduce a physically motivated interpolation scheme that enables us to determine the barcode velocities rather accurately. Our theoretical analysis of the motion of the DNA through a cylindrical nanopore opens up the possibility of its experimental realization and carries over to multi-nanopore devices used for barcoding.

We report a method for DNA barcoding from the dwell time measurement of protein tags (barcodes) along the DNA backbone using Brownian dynamics simulation of a model DNA and use a recursive scheme to improve the measurements to almost 100% accuracy.

DNA barcodes using a double nanopore system

The potential of a double nanopore system to determine DNA barcodes has been demonstrated experimentally. By carrying out Brownian dynamics simulation on a coarse-grained model DNA with protein tag (barcodes) at known locations along the chain backbone, we demonstrate that due to large variation of velocities of the chain segments between the tags, it is inevitable to under/overestimate the genetic lengths from the experimental current blockade and time of flight data. We demonstrate that it is the tension propagation along the chain's backbone that governs the motion of the entire chain and is the key element to explain the non uniformity and disparate velocities of the tags and DNA monomers under translocation that introduce errors in measurement of the length segments between protein tags. Using simulation data we further demonstrate that it is important to consider the dynamics of the entire chain and suggest methods to accurately decipher barcodes. We introduce and validate an interpolation scheme using simulation data for a broad distribution of tag separations and suggest how to implement the scheme experimentally.

Polymer escape through a three dimensional double-nanopore system

We study the escape dynamics of a double-stranded DNA (dsDNA) through an idealized double nanopore geometry subject to two equal and opposite forces (tug-of-war) using Brownian dynamics (BD) simulation. In addition to the geometrical restrictions imposed on the cocaptured dsDNA segment in between the pores, the presence of tug-of-war forces at each pore results in a variation of the local chain stiffness for the segment of the chain in between the pores, which increases the overall stiffness of the chain. We use the BD simulation results to understand how the intrinsic chain stiffness and the tug-of-war forces affect the escape dynamics by monitoring the local chain persistence length ℓ_p, the residence time of the individual monomers W(m) in the nanopores, and the chain length dependence of the escape time ⟨τ⟩ and its distribution. Finally, we generalize the scaling theory for the unbiased single nanopore translocation for a fully flexible chain for the escape of a semi-flexible chain through a double nanopore in the presence of tug-of-war forces. We establish that the stiffness dependent part of the escape time is approximately independent of the translocation mechanism so that ⟨τ⟩∼ℓ_p ^2/D+2, and therefore, the generalized escape time for a semi-flexible chain can be written as ⟨τ⟩=AN^αℓ_p ^2/D+2. We use the BD simulation results to compare the predictions of the scaling theory. Our numerical studies supplemented by scaling analysis provide fundamental insights to design new experiments where a dsDNA moves slowly through a series of graphene nanopores.

In situ solid-state nanopore fabrication

Nanopores in solid-state membranes are promising for a wide range of applications including DNA sequencing, ultra-dilute analyte detection, protein analysis, and polymer data storage. Techniques to fabricate solid-state nanopores have typically been time consuming or lacked the resolution to create pores with diameters down to a few nanometres, as required for the above applications. In recent years, several methods to fabricate nanopores in electrolyte environments have been demonstrated. These in situ methods include controlled breakdown (CBD), electrochemical reactions (ECR), laser etching and laser-assisted controlled breakdown (la-CBD). These techniques are democratising solid-state nanopores by providing the ability to fabricate pores with diameters down to a few nanometres (i.e. comparable to the size of many analytes) in a matter of minutes using relatively simple equipment. Here we review these in situ solid-state nanopore fabrication techniques and highlight the challenges and advantages of each method. Furthermore we compare these techniques by their desired application and provide insights into future research directions for in situ nanopore fabrication methods.

Scaling Theory of a Polymer Ejecting from a Cavity into a Semi-Space

A two-stage model is developed in order to understand the scaling behaviors of single polymers ejecting from a spherical cavity through a nanopore. The dynamics of ejection is derived by balancing the free energy change with the energy dissipation during a process. The ejection velocity is found to vary with the number of monomers in the cavity, m, as mz1/(Nx1D3z1) at the confined stage, and it turns to be m−z2 at the non-confined stage, where N is the chain length and D the cavity diameter. The exponents are shown to be z1=(3ν−1)−1, z2=2ν and x1=1/3, with ν being the Flory exponent. The profile of the velocity is carefully verified by performing Langevin dynamics simulations. The simulations further reveal that, at the starting point, the decreasing of m can be stalled for a good moment. It suggests the existence of a pre-stage that can be explained by using the concept of a classical nucleation theory. By trimming the pre-stage, the ejection time are properly studied by varying N, D, and ϕ0 (the initial volume fraction). The scaling properties of the nucleation time are also analyzed. The results fully support the predictions of the theory. The physical pictures are given for various ejection conditions that cover the entire parameter space.

High-Fidelity Capture, Threading, and Infinite-Depth Sequencing of Single DNA Molecules with a Double-Nanopore System

Nanopore sequencing of nucleic acids has an illustrious history of innovations that eventually made commercial nanopore sequencing possible. Nevertheless, the present nanopore sequencing technology leaves much room for improvement, especially with respect to accuracy of raw reads and detection of nucleotide modifications. Double-nanopore sequencing-an approach where a DNA molecule is pulled back and forth by a tug-of-war of two nanopores-could potentially improve single-molecule read accuracy and modification detection by offering multiple reads of the same DNA fragment. One principle difficulty in realizing such a technology is threading single-stranded DNA through both nanopores. Here, we describe and demonstrate through simulations a nanofluidic system for loading and threading DNA strands through a double-nanopore setup with nearly 100% fidelity. The high-efficiency loading is realized by using hourglass-shaped side channels that not only deliver the molecules to the nanopore but also retain molecules that missed the nanopore at the first passage to attempt the nanopore capture again. The second nanopore capture is facilitated by an orthogonal microfluidic flow that unravels the molecule captured by the first nanopore and delivers it to the capture volume of the second nanopore. We demonstrate the potential utility of our double-nanopore system for DNA sequencing by simulating repeat back-and-forth motion-flossing-of a DNA strand through the double-nanopore system. We show that repeat exposure of the same DNA fragments to the nanopore sensing volume considerably increases accuracy of the nucleotide sequence determination and that correlated displacement of ssDNA through the two nanopores may facilitate recognition of homopolymer fragments.

Tug of war in a double-nanopore system

We simulate a tug-of-war (TOW) scenario for a model double-stranded DNA threading through a double nanopore (DNP) system. The DNA, simultaneously captured at both pores, is subject to two equal and opposite forces -f[over ⃗]_{L}=f[over ⃗]_{R} (TOW), where f[over ⃗]_{L} and f[over ⃗]_{R} are the forces applied to the left and the right pore, respectively. Even though the net force on the DNA polymer Δf[over ⃗]_{LR}=f[over ⃗]_{L}+f[over ⃗]_{R}=0, the mean first passage time (MFPT) 〈τ〉 depends on the magnitude of the TOW forces |f_{L}|=|f_{R}|=f_{LR}. We qualitatively explain this dependence of 〈τ〉 on f_{LR} from the known results for the single-pore translocation of a triblock copolymer A-B-A with ℓ_{pB}>ℓ_{pA}, where ℓ_{pA} and ℓ_{pB} are the persistence length of the A and B segments, respectively. We demonstrate that the time of flight of a monomer with index m [〈τ_{LR}(m)〉] from one pore to the other exhibits quasiperiodic structure commensurate with the distance between the pores d_{LR}. Finally, we study the situation where we offset the TOW biases so that Δf[over ⃗]_{LR}=f[over ⃗]_{L}+f[over ⃗]_{R}≠0, and qualitatively reproduce the experimental result of the dependence of the MFPT on Δf[over ⃗]_{LR}. We demonstrate that, for a moderate bias, the MFPT for the DNP system for a chain length N follows the same scaling ansatz as that for the single nanopore, 〈τ〉=(AN^{1+ν}+η_{pore}N)(Δf_{LR})^{-1}, where η_{pore} is the pore friction, which enables us to estimate 〈τ〉 for a long chain. Our Brownian dynamics simulation studies provide fundamental insights and valuable information about the details of the translocation speed obtained from 〈τ_{LR}(m)〉, and accuracy of the translation of the data obtained in the time domain to units of genomic distances.

Individually Addressable Multi-nanopores for Single-Molecule Targeted Operations

The fine-tuning of molecular transport is a ubiquitous problem of single-molecule methods. The latter is evident even in powerful single-molecule techniques such as nanopore sensing, where the quest for resolving more detailed biomolecular features is often limited by insufficient control of the dynamics of individual molecules within the detection volume of the nanopore. In this work, we introduce and characterize a reconfigurable multi-nanopore architecture that enables additional channels to manipulate the dynamics of DNA molecules in a nanopore. We show that the fabrication process of this device, consisting of four adjacent, individually addressable nanopores located at the tip of a quartz nanopipette, is fast and highly reproducible. By individually tuning the electric field across each nanopore, these devices can operate in several unique cooperative detection modes that allow moving, sensing, and trapping of DNA molecules with high efficiency and increased temporal resolution.