Atomic Structural Evolution of Single-Layer Pt Clusters as Efficient Electrocatalysts

Highly Dispersed Single Clusters Supported Porphyrinic Metal-Organic Frameworks for Synergetic CO2 Electroreduction to CH4

The electrocatalytic CO2 reduction is a promising path toward the carbon-neutral goal but remains a huge challenge due to the high activation barrier for CO2 and poor selectivity. Herein, the highly dispersed triruthenium single cluster (Ru3-SCs) is confined into the nanospace of pyrrole-3-carboxylic acid (PyrA)-modified nickel-porphyrin-based metal-organic framework (Ni-PCN-222-PyrA) to form the composite (Ru3-SCs@Ni-PCN-222-PyrA) through the pre-coordination confinement strategy. The prepared Ru3-SCs@Ni-PCN-222-PyrA can accelerate the selective reduction of CO2 to CH4 via electrocatalysis. Under -1.0 V versus reversible hydrogen electrode (RHE), Ru3-SCs@Ni-PCN-222-PyrA affords CO2 electroreduction to CH4 with a high selectivity of 71.9% Faradaic efficiency. Mechanistic studies reveal that the superior reactivity can be attributed to the ensemble effect and synergistic catalysis of Ru3-SCs, in which one Ru atom is responsible for CO2 reduction to *CO and another Ru atom promotes the water splitting to generate *H, and then the two intermediates of *CO and *H coupled to form the key intermediate of *CHO in a thermodynamically favorable way.

Loading Pt Nanoparticles on Ultrathin Amorphous Nanobelts for Enhanced Hydrogen Production

Due to unique metal-support interactions, loaded structures have been widely used in the structural design of hydrogen-extraction reaction (HER) electrocatalysts. However, the development of catalysts that are both active and stable remains a great challenge. Herein, we successfully anchored Pt nanoparticles on ultrathin nanobelts to construct a crystalline/amorphous Pt NPs/CNWOx NBs heterostructure, which possesses the dual advantages of fast electron transfer in crystalline materials and effective exposure of active sites in amorphous materials. The obtained catalyst exhibits great HER catalytic performance in both 0.5 M H2SO4 and 1 M KOH. Compared with CNWOx nanobelts, Pt-loaded Pt NPs/CNWOx NBs exhibits lower overpotentials and faster HER kinetics. For acidic and alkaline HER, the catalyst required only low overpotentials of 35 mV and 60 mV to achieve a current density of 10 mA cm-2, respectively, which is even better than that of commercial Pt/C. And Pt NPs/CNWOx NBs shows almost no degradation after long time stability tests. It is found that the composite structure of crystalline/amorphous, the heterogeneous interface and the introduction of Pt synergize with each other to achieve increased number of active sites and enhanced intrinsic activity, resulting in excellent electrocatalytic HER activity and stability.

Encapsulation of Sn Sub-Nanoclusters in Multichannel Carbon Matrix for High-Performance Potassium-Ion Batteries

Sub-nanoclusters with ultra-small particle sizes are particularly significant to create advanced energy storage materials. Herein, Sn sub-nanoclusters encapsulated in nitrogen-doped multichannel carbon matrix (denoted as Sn-SCs@MCNF) are designed by a facile and controllable route as flexible anode for high-performance potassium ion batteries (PIBs). The uniformly dispersed Sn sub-nanoclusters in multichannel carbon matrix can be precisely identified, which ensure us to clarify the size influence on the electrochemical performance. The sub-nanoscale effect of Sn-SCs@MCNF restrains electrode pulverization and enhances the K+ diffusion kinetics, leading to the superior cycling stability and rate performance. As freestanding anode in PIBs, Sn-SCs@MCNF manifests superior K+ storage properties, such as exceptional cycling stability ( around 331 mAh g-1 after 150 cycles at 100 mA g-1) and rate capability. Especially, the Sn-SCs@MCNF||KFe[Fe(CN)6] full cell demonstrates impressive reversible capacity of around 167 mAh g-1 at 0.4 A g-1 even after 200 cycles. Theoretical calculations clarify that the ultrafine Sn sub-nanoclusters are beneficial for electron transfer and contribute to the lower energy barriers of the intermediates, thereby resulting in promising electrochemical performance. Comprehensive investigation for the intrinsic K+ storage process of Sn-SCs@MCNF is revealed by in situ analysis. This work provides vital guidance to design sub-nanoscale functional materials for high-performance energy-storage devices.

Simultaneously activating molecular oxygen and surface lattice oxygen on Pt/TiO2 for low-temperature CO oxidation

Developing high-performance Pt-based catalysts with low Pt loading is crucial but challenging for CO oxidation at temperatures below 100 °C. Herein, we report a Pt-based catalyst with only a 0.15 wt% Pt loading, which consists of Pt-Ti intermetallic single-atom alloy (ISAA) and Pt nanoparticles (NP) co-supported on a defective TiO2 support, achieving a record high turnover frequency of 11.59 s-1 at 80 °C and complete conversion of CO at 120 °C. This is because the coexistence of Pt-Ti ISAA and Pt NP significantly alleviates the competitive adsorption of CO and O2, enhancing the activation of O2. Furthermore, Pt single atom sites are stabilized by Pt-Ti ISAA, resulting in distortion of the TiO2 lattice within Pt-Ti ISAA. This distortion activates the neighboring surface lattice oxygen, allowing for the simultaneous occurrence of the Mars-van Krevelen and Langmuir-Hinshelwood reaction paths at low temperatures.

Mo-doping heterojunction: interfacial engineering in an efficient electrocatalyst for superior simulated seawater hydrogen evolution

Exploring economical, efficient, and stable electrocatalysts for the seawater hydrogen evolution reaction (HER) is highly desirable but is challenging. In this study, a Mo cation doped Ni0.85Se/MoSe2 heterostructural electrocatalyst, Mox-Ni0.85Se/MoSe2, was successfully prepared by simultaneously doping Mo cations into the Ni0.85Se lattice (Mox-Ni0.85Se) and growing atomic MoSe2 nanosheets epitaxially at the edge of the Mox-Ni0.85Se. Such an Mox-Ni0.85Se/MoSe2 catalyst requires only 110 mV to drive current densities of 10 mA cm-2 in alkaline simulated seawater, and shows almost no obvious degradation after 80 h at 20 mA cm-2. The experimental results, combined with the density functional theory calculations, reveal that the Mox-Ni0.85Se/MoSe2 heterostructure will generate an interfacial electric field to facilitate the electron transfer, thus reducing the water dissociation barrier. Significantly, the heteroatomic Mo-doping in the Ni0.85Se can regulate the local electronic configuration of the Mox-Ni0.85Se/MoSe2 heterostructure catalyst by altering the coordination environment and orbital hybridization, thereby weakening the bonding interaction between the Cl and Se/Mo. This synergistic effect for the Mox-Ni0.85Se/MoSe2 heterostructure will simultaneously enhance the catalytic activity and durability, without poisoning or corrosion of the chloride ions.

Atomically dispersed Fe-O4-C sites as efficient electrocatalysts for electrosynthesis of hydrogen peroxide

The electrochemical reduction of oxygen via the 2e pathway is an environmentally friendly approach to the electrosynthesis of H2O2. Nevertheless, its sluggish kinetics and limited selectivity hinder its practical application. Herein, single Fe atoms anchored on graphene oxide (SA Fe/GO) with Fe-O4-C sites are developed as an efficient electrocatalyst for the electro-synthesis of H2O2. These Fe-O4-C site active centres could efficiently enhance the activity and selectivity towards 2e electrochemical oxygen reduction in an alkaline environment. The newly-developed SA Fe/GO electrocatalyst demonstrates exceptional electrochemical performance, exhibiting impressive activity with an onset potential of 0.90 and H2O2 production of 0.60 mg cm-2 h-1 at 0.4 V. Remarkably, it achieves a remarkable H2O2 selectivity of over 95.5%.

Platinum Species on Oxygen Vacancy-Rich Titania for Efficient Basic Electrocatalytic Hydrogen Evolution

Oxygen vacancy-rich titania is a promising support for enhancing the hydrogen evolution reaction (HER). This work innovatively loaded Pt nanoparticles on oxygen vacancy-rich TiO2 (Pt/Vo-TiO2) in situ by using a photocatalytic device. The synthesis conditions are mild, do not require high temperatures and strong reducing agents, and can avoid the accumulation of platinum species. X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectrometry (XAS) verified the synergistic effect of Pt species and oxygen vacancies on the progress of the reaction kinetics, where the Pt particles exposed by the in situ synthesis functioned as reaction sites in the electrocatalytic hydrogen evolution. Based on this, Pt/Vo-TiO2 exhibits excellent electrocatalytic performance with an overpotential of only 56 mV at a current density of 10 mA cm-2 and a Tafel slope of only 73.5 mV dec-1. This work provides a new strategy for designing highly efficient HER catalysts.

Single-Atom Nano-Islands (SANIs): A Robust Atomic-Nano System for Versatile Heterogeneous Catalysis Applications

Academician Tao Zhang from China and co-workers designed the first Pt₁ /FeO_x single-atom catalysts (SACs) in 2011, and they proposed the concept of "single-atom catalysis" in the field of heterogeneous catalysis. Generally, it is easy for active metal single-atom sites on a carrier to migrate and aggregate, which results in poor performance; or the chemical bond between the metal atom and carrier is too strong (immovable), which results in passivation of the active site. Recently, "nano-island" type SACs were designed, in which the active metal atoms are isolated on the "islands", and can move within the respective "island", but the migration across the "island" is blocked, to achieve a dynamic confinement design of single atoms (that is, a "moving but not aggregating" design philosophy). Herein, a new concept of "single-atom nano-islands (SANIs)" is proposed to describe these congeneric "atomic-nano" systems in heterogeneous catalysis fields. Particularly, the SANIs are divided into three categories: "one-island-one-atom", "one-island-multi-atoms", and "island-sea synergism" architectures. The scientific significance and application principles of SANIs in versatile heterogeneous catalysis fields (i.e., thermocatalysis, electrocatalysis, and photocatalysis) are summarized. The challenges and proposals of SANIs are also provided.

Cation-Tuning Engineering on Metal Oxides for Oxygen Electrocatalysis

Cation-tuning engineering has become a new frontier in altering the electronic structure of electrocatalysts, which has been employed to enhance their electrochemical performance. Significant efforts have been made to promote the electrochemical performance of transition metal-based materials during oxygen electrocatalysis and related energy devices such as Zn-air batteries. Herein, the advantages of cation-tuning engineering, including cation vacancies/defects and cation doping, in the modification of the electronic structure of transition metal oxide catalysts are discussed. Additionally, practical applications of the cation-tuning engineering strategy are reviewed in detail with a special emphasis on oxygen reduction reaction and oxygen evolution reaction. Lastly, challenges and future opportunities in this field are also proposed.

Atomically Dispersed Dual-Site Cathode with a Record High Sulfur Mass Loading for High-Performance Room-Temperature Sodium-Sulfur Batteries

Room-temperature sodium-sulfur (RT-Na/S) batteries possess high potential for grid-scale stationary energy storage due to their low cost and high energy density. However, the issues arising from the low S mass loading and poor cycling stability caused by the shuttle effect of polysulfides seriously limit their operating capacity and cycling capability. Herein, sulfur-doped graphene frameworks supporting atomically dispersed 2H-MoS₂ and Mo₁ (S@MoS₂ -Mo₁ /SGF) with a record high sulfur mass loading of 80.9 wt.% are synthesized as an integrated dual active sites cathode for RT-Na/S batteries. Impressively, the as-prepared S@MoS₂ -Mo₁ /SGF display unprecedented cyclic stability with a high initial capacity of 1017 mAh g^-1 at 0.1 A g^-1 and a low-capacity fading rate of 0.05% per cycle over 1000 cycles. Experimental and computational results including X-ray absorption spectroscopy, in situ synchrotron X-ray diffraction and density-functional theory calculations reveal that atomic-level Mo in this integrated dual-active-site forms a delocalized electron system, which could improve the reactivity of sulfur and reaction reversibility of S and Na, greatly alleviating the shuttle effect. The findings not only provide an effective strategy to fabricate high-performance dual-site cathodes, but also deepen the understanding of their enhancement mechanisms at an atomic level.

Advances in the Electrocatalytic Hydrogen Evolution Reaction by Metal Nanoclusters-based Materials

With the development of renewable energy systems, clean hydrogen is burgeoning as an optimal alternative to fossil fuels, in which its application is promising to retarding the global energy and environmental crisis. The hydrogen evolution reaction (HER), capable of producing high-purity hydrogen rapidly in electrocatalytic water splitting, has received much attention. Abundant research about HER has been done, focusing on advanced electrocatalyst design with high efficiency and robust stability. As potential HER catalysts, metal nanoclusters (MNCs) have been studied extensively. They are composed of several to a hundred metal atoms, with sizes being comparable to the Fermi wavelength of electrons, that is, < 2.0 nm. Different from metal atoms/nanoparticles, they exhibit unique catalytic properties due to their quantum size effect and low-coordination environment. In this review, the activity-enhancing approaches of MNCs applied in HER electrocatalysis are mainly summarized. Furthermore, recent progress in MNCs classified with different stabilization strategies, that is, the freestanding MNCs, MNCs with organic, metal and carbon supports, are introduced. Finally, the current challenges and deficiencies of these MNCs for HER are prospected.

Synergy of Platinum Single Atoms and Platinum Atomic Clusters on Sulfur-Doped Titanium Nitride Nanotubes for Enhanced Hydrogen Evolution Reaction

Highly dispersed Pt, such as Pt single atoms and atomic clusters, has great potential in the electrocatalytic hydrogen evolution reaction (HER) due to the high atomic efficiency and unique electronic configuration. Rationally regrating the electronic structure of Pt catalysts is desirable for promoting the HER performance. Herein, a 3D self-supported monolithic electrode consisting of Pt single atoms (Pt_SAs ) and Pt atomic clusters (Pt_ACs ) anchored on sulfur-doped titanium nitride nanotubes (S-TiN NTs) encapsulated in polyaniline (PANI) on Ti mesh (PANI@Pt/S-TiN NTs/Ti) via a facile electrochemical strategy for efficient HER is designed and synthesized. Contributed by the unique structure and composition and the synergy of Pt_SAs , Pt_ACs and S-TiN NTs, the PANI@Pt/S-TiN NTs/Ti electrode exhibits ultrahigh HER activities with only 12, 25 and 39 mV overpotentials at -10 mA cm^-2 in acidic, alkaline and neutral media, respectively, and can maintain a stable performance for 25 h. Impressively, the mass activities are respectively up to 26.1, 22.4, and 17.7 times as that of Pt/C/CC electrode. Theoretical calculation results show that the synergistic effect of Pt_SAs , Pt_ACs , and S-TiN NTs can optimize the electronic structure of Pt and generate multiple active sites with a thermodynamically favorable hydrogen adsorption free energy (ΔG_H* ), thereby resulting in an enhanced HER activity.

Pt-Co Electrocatalysts: Syntheses, Morphologies, and Applications

Pt-Co electrocatalysts have attracted significant attention because of their excellent performance in many electrochemical reactions. This review focuses on Pt-Co electrocatalysts designed and prepared for electrocatalytic applications. First, the various synthetic methods and synthesis mechanisms are systematically summarized; typical examples and core synthesis parameters are discussed for regulating the morphology and structure. Then, starting with the design and structure-activity relationship of catalysts, the research progress of the morphologies and structures of Pt-Co electrocatalysts obtained based on various strategies, the structure-activity relationship between them, and their properties are summarized. In addition, the important electrocatalytic applications and mechanisms of Pt-Co catalysts, including electrocatalytic oxidation/reduction and bifunctional catalytic reactions, are described and summarized, and their high catalytic activities are discussed on the basis of their mechanism and active sites. Moreover, the advanced electrochemical in situ characterization techniques are summarized, and the challenges and direction concerning the development of high-performance Pt-Co catalysts in electrocatalysis are discussed.

Isolating Single and Few Atoms for Enhanced Catalysis

Atomically dispersed metal catalysts have triggered great interest in the field of catalysis owing to their unique features. Isolated single or few metal atoms can be anchored on substrates via chemical bonding or space confinement to maximize atom utilization efficiency. The key challenge lies in precisely regulating the geometric and electronic structure of the active metal centers, thus significantly influencing the catalytic properties. Although several reviews have been published on the preparation, characterization, and application of single-atom catalysts (SACs), the comprehensive understanding of SACs, dual-atom catalysts (DACs), and atomic clusters has never been systematically summarized. Here, recent advances in the engineering of local environments of state-of-the-art SACs, DACs, and atomic clusters for enhanced catalytic performance are highlighted. Firstly, various synthesis approaches for SACs, DACs, and atomic clusters are presented. Then, special attention is focused on the elucidation of local environments in terms of electronic state and coordination structure. Furthermore, a comprehensive summary of isolated single and few atoms for the applications of thermocatalysis, electrocatalysis, and photocatalysis is provided. Finally, the potential challenges and future opportunities in this emerging field are presented. This review will pave the way to regulate the microenvironment of the active site for boosting catalytic processes.

Facile Synthesis of Unsupported Pd Aerogel for High Performance Formic Acid Microfluidic Fuel Cell

In this work, unsupported Pd aerogel catalysts were synthesized for the very first time by using microwaves as a heating source followed by a lyophilization drying process and used towards formic acid electro-oxidation in a microfluidic fuel cell. Aerogels were also made by heating in a conventional oven to evaluate the microwave effect during the synthesis process of the unsupported Pd aerogels. The performance of the catalysts obtained by means of microwave heating favored the formic acid electro-oxidation with H₂SO₄ as the electrolyte. The aerogels' performance as anodic catalysts was carried out in a microfluidic fuel cell, giving power densities of up to 14 mW cm^-2 when using mass loads of only 0.1 mg on a 0.019 cm² electrode surface. The power densities of the aerogels obtained by microwave heating gave a performance superior to the resultant aerogel prepared using conventional heating and even better than a commercial Pd/C catalyst.

Interfacial Water Enrichment and Reorientation on Pt/C Catalysts Induced by Metal Oxides Participation for Boosting the Hydrogen Evolution Reaction

State-of-the-art hydrogen evolution reaction (HER) catalysts have been Pt- or Pt-based alloys so far due to their extremely low onset potential; however, their HER kinetics become worse under strong cathodic polarization. Herein, we take commercial Pt/C decorated with a small amount of metal oxides (MO_x-Pt/C) as model catalysts to improve the HER kinetics at a wide cathodic potential range in alkaline conditions. The MO_x-Pt/C catalysts markedly reduce the Tafel slope and overpotential under both small and large cathodic polarization. Multiscale simulations reveal that the metal oxides can cause a so-called local electric field enhancement and induce interfacial water enrichment and reorientation. It accelerates the diffusion of hydrated K⁺ and facilitates the activation of interfacial water, which boosts the Volmer step to match the fast H₂ evolution especially under strong potential polarization. Our work discloses important clues about how multiple components play a role in HER electrocatalysis.

Synergistic Binary Fe-Co Nanocluster Supported on Defective Tungsten Oxide as Efficient Oxygen Reduction Electrocatalyst in Zinc-Air Battery

Rational design of metal oxide supported non-precious metals is essential for the development of stable and high-efficiency oxygen reduction reaction (ORR) electrocatalysts. Here, an efficient ORR catalyst consisting of binary Fe/Co nanoclusters supported by defective tungsten oxide and embedded N-doped carbon layer (NC) with a 3D ordered macroporous architecture (3DOM Fe/Co@NC-WO2- x ) is developed. The oxygen deficient 3DOM WO2- x not only serves as a porous and stable support, but also enhances the conductivity and ensures good dispersion of the binary Fe/Co nanocluster, benefiting its ORR catalytic activity. Theoretical calculation shows that there exists a synergistic effect of electron transfer from Fe to Co in the supported binary Fe/Co cluster, promoting the ORR reaction energetics. Accordingly, the 3DOM Fe/Co@NC-WO2- x catalyst exhibits excellent ORR activity in alkaline medium with a half wave potential (E1/2 ) of 0.87 V higher than that of Pt/C (0.85 V). The zinc-air batteries assembled by 3DOM Fe/Co@NC-WO2- x cathode deliver a higher power density and specific capacity than that of Pt/C. A new strategy of combining synergistic binary-metal nanoclusters and conductive metal oxide support design is provided here to develop efficient and durable ORR electrocatalyst.

Pt Edge-Doped MoS2 : Activating the Active Sites for Maximized Hydrogen Evolution Reaction Performance

The demand of clean energy calls for efficient and low-cost hydrogen evolution reaction electrocatalysts. Fabricating hybrid catalysts from noble/non-noble catalysts is a practical route to reducing the consumption of noble metals and enhancing catalytic efficiency. Here, 2H-MoS₂ is etched and edge-doped with Pt nanoparticles using focused ion beam and photoreduction techniques. Precise comparison of as-prepared samples demonstrates that the enhancement of catalytic performance can be controlled through tuning the catalyst defect length. On this basis, remarkably high performance is obtained by designing a specific defect array that is superior to commercial Pt/C with less Pt loading and higher mass activity. It has been proved by experimentation and COMSOL Multiphysics simulations that the promotion of catalytic activity not only benefits from the synergistic effect of Pt and edge active sites, but also contributes to the increased potential at the edges of the designed defect. This study sheds light on the mechanism of understanding nanoscale edge-doped hybrid catalysts and provides a feasible strategy for the full utilization of noble metals.