In Situ Electrochemical Activation Derived Lix MoOy Nanorods as the Multifunctional Interlayer for Fast Kinetics Li-S batteries

A Separator with Double Layers Individually Modified by LiAlO2 Solid Electrolyte and Conductive Carbon for High-performance Lithium-Sulfur Batteries

The "shuttle effect" and the unchecked growth of lithium dendrites during operation in lithium-sulfur (Li-S) batteries seriously impact their practical applications. Besides, the performances of Li-S batteries at high current densities and sulfur loadings hold the key to bridge the gap between laboratory research and practical applications. To address the above issues and facilitate the practical utilization of Li-S batteries, the commercial separator is modified with solid electrolyte (nanorod LiAlO2, LAO) and conductive carbon (Super P) to obtain a double coated separator (SPLAOMS). The SPLAOMS can physically barrier polysulfides and accelerate reaction kinetics. In addition, it enhances uniform lithium deposition, boosts ionic conductivity, and increases the utilization of active sulfur substances. The prepared Li-S batteries exhibit excellent cycling stability under harsh conditions (high sulfur loadings and high current densities) with an initial capacity of 733 mAh g-1 and a capacity attenuation of 0.03% per cycle at 5C in 500 cycle life. Under ultra-high sulfur loading (8.2 mg cm-2), the prepared battery maintains a satisfactory capacity of 800 mAh g-1 during cycling, demonstrating enormous commercial application potential. This study serves as a pivotal reference for the commercialization of high-performance Li-S batteries.

Ultrafast microwave synthesis of MoSSe@ graphene composites via dual anion design for long-cyclable Li-S batteries

Lithium-sulfur batteries (LSBs) have been increasingly recognized as a promising candidate for the next-generation energy-storage systems. This is primarily because LSBs demonstrate an unparalleled theoretical capacity and energy density far exceeding conventional lithium-ion batteries. However, the sluggish redox kinetics and formidable dissolution of polysulfides lead to poor sulfur utilization, serious polarization issues, and cyclic instability. Herein, sulfiphilic few-layer MoSSe nanoflake decorated on graphene (MoSSe@graphene), a two-dimensional and catalytically active hetero-structure composite, was prepared through a facile microwave method, which was used as a conceptually new sulfur host and served as an interfacial kinetic accelerator for LSBs. Specifically, this sulfiphilic MoSSe nanoflake not only strongly interacts with soluble polysulfides but also dynamically promotes polysulfide redox reactions. In addition, the 2D graphene nanosheets can provide an extra physical barrier to mitigate the diffusion of lithium polysulfides and enable much more uniform sulfur distribution, thus dramatically inhibiting polysulfides shuttling meanwhile accelerating sulfur conversion reactions. As a result, the cells with MoSSe@graphene nanohybrid achieved a superior rate performance (1091 mAh/g at 1C) and an ultralow decaying rate of 0.040 % per cycle after 1000 cycles at 1C.

Versatile Separators Toward Advanced Lithium-Sulfur Batteries: Status, Recent Progress, Challenges and Perspective

Lithium-sulfur batteries (LSBs) have recently gained extensive attention due to their high energy density, low cost, and environmental friendliness. However, serious shuttle effect and uncontrolled growth of lithium dendrites restrict them from further commercial applications. As "the third electrode", functional separators are of equal significance as both anodes and cathodes in LSBs. The challenges mentioned above are effectively addressed with rational design and optimization in separators, thereby enhancing their reversible capacities and cycle stability. The review discusses the status/operation mechanism of functional separators, then primarily focuses on recent research progress in versatile separators with purposeful modifications for LSBs, and summarizes the methods and characteristics of separator modification, including heterojunction engineering, single atoms, quantum dots, and defect engineering. From the perspective of the anodes, distinct methods to inhibit the growth of lithium dendrites by modifying the separator are discussed. Modifying the separators with flame retardant materials or choosing a solid electrolyte is expected to improve the safety of LSBs. Besides, in-situ techniques and theoretical simulation calculations are proposed to advance LSBs. Finally, future challenges and prospects of separator modifications for next-generation LSBs are highlighted. We believe that the review will be enormously essential to the practical development of advanced LSBs.

Electrochemically Active MoO3/TiN Sulfur Host Inducing Dynamically Reinforced Built-in Electric Field for Advanced Lithium-Sulfur Batteries

Although various electrocatalysts have been developed to ameliorate the shuttle effect and sluggish Li-S conversion kinetics, their electrochemical inertness limits the sufficient performance improvement of lithium-sulfur batteries (LSBs). In this work, an electrochemically active MoO3/TiN-based heterostructure (MOTN) is designed as an efficient sulfur host that can improve the overall electrochemical properties of LSBs via prominent lithiation behaviors. By accommodating Li ions into MoO3 nanoplates, the MOTN host can contribute its own capacity. Furthermore, the Li intercalation process dynamically affects the electronic interaction between MoO3 and TiN and thus significantly reinforces the built-in electric field, which further improves the comprehensive electrocatalytic abilities of the MOTN host. Because of these merits, the MOTN host-based sulfur cathode delivers an exceptional specific capacity of 2520 mA h g-1 at 0.1 C. Furthermore, the cathode exhibits superior rate capability (564 mA h g-1 at 5 C), excellent cycling stability (capacity fade rate of 0.034% per cycle for 1200 cycles at 2 C), and satisfactory areal capacity (6.6 mA h cm-2) under a high sulfur loading of 8.3 mg cm-2. This study provides a novel strategy to develop electrochemically active heterostructured electrocatalysts and rationally manipulate the built-in electric field for achieving high-performance LSBs.

Enhanced lithium host performance of multi-walled carbon nanotubes through acidic functionalization for lithium-sulfur batteries

Carbon nanotubes (CNTs) have been explored as a potential cathode material for lithium-sulfur (Li-S) batteries owing to their unique structure. However, traditional CNTs exhibit poor dispersion properties when preparing electrodes. The non-uniform distribution of the conductive agents hinders the formation of enough sites for sulfur loading, which results in the aggregation of sulfur/Li2S and severe polarization. In this study, we propose the acidic functionalization of CNTs in the cathode structure as a practical solution for mitigating the poor dispersion and polysulfide shuttling in lithium-sulfur batteries. Multiwalled CNTs were functionalized by oxidation through acidic treatment using sulfuric, nitric, and mixed acids. The cathode prepared with a mixture of sulfuric and nitric acids showed a coulombic efficiency of 99 % after 100 cycles, with a discharge capacity of 743 mAh g-1. These findings demonstrate the effectiveness of the acidic functionalization of CNTs as a promising approach for enhancing the electrochemical performance and commercial viability of lithium-sulfur batteries.

A Review on Engineering Transition Metal Compound Catalysts to Accelerate the Redox Kinetics of Sulfur Cathodes for Lithium-Sulfur Batteries

Engineering transition metal compounds (TMCs) catalysts with excellent adsorption-catalytic ability has been one of the most effective strategies to accelerate the redox kinetics of sulfur cathodes. Herein, this review focuses on engineering TMCs catalysts by cation doping/anion doping/dual doping, bimetallic/bi-anionic TMCs, and TMCs-based heterostructure composites. It is obvious that introducing cations/anions to TMCs or constructing heterostructure can boost adsorption-catalytic capacity by regulating the electronic structure including energy band, d/p-band center, electron filling, and valence state. Moreover, the electronic structure of doped/dual-ionic TMCs are adjusted by inducing ions with different electronegativity, electron filling, and ion radius, resulting in electron redistribution, bonds reconstruction, induced vacancies due to the electronic interaction and changed crystal structure such as lattice spacing and lattice distortion. Different from the aforementioned two strategies, heterostructures are constructed by two types of TMCs with different Fermi energy levels, which causes built-in electric field and electrons transfer through the interface, and induces electron redistribution and arranged local atoms to regulate the electronic structure. Additionally, the lacking studies of the three strategies to comprehensively regulate electronic structure for improving catalytic performance are pointed out. It is believed that this review can guide the design of advanced TMCs catalysts for boosting redox of lithium sulfur batteries.

Multifunctional Catalytic Hierarchical Interfaces of Ni12 P5 -Ni2 P Porous Nanosheets Enabled Both Sulfides Reaction Promotion and Li-Dendrite Suppression for High-Performance Li-S Full Batteries

The development of lithium-sulfur (Li-S) batteries is very promising and yet faces the issues of hindered polysulfides conversion and Li dendrite growth. Different from using different materials strategies to overcome these two types of problems, here multifunctional catalytic hierarchical interfaces of Ni12 P5 -Ni2 P porous nanosheets formed by Ni2 P partially in situ converted from Ni12 P5 are proposed. The unique electronic structure in the interface endows Ni12 P5 -Ni2 P effective electrocatalysis effect toward both sulfides' reduction and oxidation through reducing Gibbs free energies, indicating a bidirectional conversion acceleration. Importantly, Ni12 P5 -Ni2 P porous nanosheets with hierarchical interfaces also reduced the Li nucleation energy barrier, and a dendrite-free Li deposition is realized during the overall Li deposition and stripping steps. To this end, Ni12 P5 -Ni2 P decorated carbon nanotube/S cathode showing a high capacity of over 1500 mAh g-1 , and a high rate capability of 8 C. Moreover, the coin full cell delivered a high capacity of 1345 mAh g-1 at 0.2 C and the pouch full cell delivered a high capacity of 1114 mAh g-1 at 0.2 C with high electrochemical stability during 180° bending. This work inspires the exploration of hierarchical structures of 2D materials with catalytically active interfaces to improve the electrochemistry of Li-S full battery.

Boosting Polysulfide Catalytic Conversion and Facilitating Li+ Transportation by Ion-Selective COFs Composite Nanowire for LiS Batteries

The large-scale application of lithium-sulfur batteries (LSBs) has been impeded by the shuttle effect of lithium-polysulfides (LiPSs) and sluggish redox kinetics since which lead to irreversible capacity decay and low sulfur utilization. Herein, a hierarchical interlayer constructed by boroxine covalent organic frameworks (COFs) with high Li⁺ conductivity is fabricated via an in situ polymerization method on carbon nanotubes (CNTs) (C@COF). The as-prepared interlayer delivers a high Li⁺ ionic conductivity (1.85 mS cm^-1 ) and Li⁺ transference number (0.78), which not only acts as a physical barrier, but also a bidirectional catalyst for LiPSs redox process owing to the abundant heterointerfaces between the inner conductive CNTs and the outer COFs. After coupling such a catalytic interlayer with sulfur cathode, the LSBs exhibit a low decay rate of 0.07% per cycle over 500 cycles at 1 C, and long cycle life at 3 C (over 1000 cycles). More importantly, a remarkable areal capacity of around 4.69 mAh cm^-2 can still be maintained after 50 cycles even under a high sulfur loading condition (6.8 mg cm^-2 ). This work paves a new way for the design of the interlayer with bidirectional catalytic behavior in LSBs.

A flame-retardant polyimide interlayer with polysulfide lithium traps and fast redox conversion towards safety and high sulfur utilization Li-S batteries

In recent years and following the progress made in lithium-ion battery technology, substantial efforts have been devoted to developing practical lithium-sulfur (Li-S) batteries for next-generation commercial energy storage devices. The practical application of Li-S batteries is still limited by dramatically reduced capacities, cycling instabilities, and safety issues arising from flammable components. In this study, we designed and fabricated a flame-retardant, multifunctional interlayer which integrated electroconductive networks, lithium polysulfide (LiPS) traps and catalysts to significantly elevate the electrochemical performance and safety of pristine Li-S batteries. The LiPS adsorptive polymer polyimide (PI) constrains polysulfides to the cathode region and effectively suppresses the shuttle effect. Coralloid PI/multiwalled carbon nanotube (MCNT) compounds provide plentiful reaction sites for active materials. The catalytic Ni on the metal skeleton surface notably promotes Li⁺ diffusion, lowers the redox overpotential and accelerates LiPS conversion, which improves the redox kinetics associated with sulfur-related species and significantly elevates sulfur utilization. At different current densities of 0.2 C and 0.5 C, impressive initial discharge capacities of 1275.3 mA h g^-1 and 1190.9 mA h g^-1 are attainable respectively, with high capacity retentions of 80.3% and 78.6% over 600 cycles. Besides, the multifunctional interlayer can also act as a flame-retardant layer to promote the safety of Li-S batteries by inhibiting the spread of fire. This study provides a feasible and prospective strategy that adopts a multifunctional interlayer to develop Li-S batteries with higher capacities, longer cycling lives and safer working conditions.