A Gyroscope Nanogenerator with Frequency Up-Conversion Effect for Fitness and Energy Harvesting

A self-powered intracardiac pacemaker in swine model

Harvesting biomechanical energy from cardiac motion is an attractive power source for implantable bioelectronic devices. Here, we report a battery-free, transcatheter, self-powered intracardiac pacemaker based on the coupled effect of triboelectrification and electrostatic induction for the treatment of arrhythmia in large animal models. We show that the capsule-shaped device (1.75 g, 1.52 cc) can be integrated with a delivery catheter for implanting in the right ventricle of a swine through the intravenous route, which effectively converts cardiac motion energy to electricity and maintains endocardial pacing function during the three-week follow-up period. We measure in vivo open circuit voltage and short circuit current of the self-powered intracardiac pacemaker of about 6.0 V and 0.2 μA, respectively. This approach exhibits up-to-date progress in self-powered medical devices and it may overcome the inherent energy shortcomings of implantable pacemakers and other bioelectronic devices for therapy and sensing.

High Toughness, Multi-dynamic Self-Healing Polyurethane for Outstanding Energy Harvesting and Sensing

Triboelectric nanogenerators (TENGs) are an emerging class of energy harvesting devices with considerable potential across diverse applications, including wearable electronic devices and self-powered sensors. However, sustained contact, friction, and incidental scratches during operation can lead to a deterioration in the electrical output performance of the TENG, thereby reducing its overall service life. To address this issue, we developed a self-healing elastomer by incorporating disulfide bonds and metal coordination bonds into the polyurethane (PU) chain. The resulting elastomer demonstrated exceptional toughness, with a high value of 85 kJ m-3 and an impressive self-healing efficiency of 85.5%. Specifically, the TENG based on that self-healing PU elastomer generated a short circuit current of 12 μA, an open circuit voltage of 120 V, and a transfer charge of 38.5 nC within a 2 cm × 2 cm area, operating in contact-separation mode. With an external resistance of 20 MΩ, the TENG achieved a power density of 2.1 W m-2. Notably, even after self-healing, the electrical output performance of the TENG was maintained at 95% of the undamaged device. Finally, the self-healing TENG was employed to construct a self-powered noncontact sensing system that can be applied to monitor human motion accurately. This research may expand the application prospects of PU materials in future human-computer interaction and self-powered sensing fields.

Recent Advances in Triboelectric Nanogenerators: From Technological Progress to Commercial Applications

Serious climate changes and energy-related environmental problems are currently critical issues in the world. In order to reduce carbon emissions and save our environment, renewable energy harvesting technologies will serve as a key solution in the near future. Among them, triboelectric nanogenerators (TENGs), which is one of the most promising mechanical energy harvesters by means of contact electrification phenomenon, are explosively developing due to abundant wasting mechanical energy sources and a number of superior advantages in a wide availability and selection of materials, relatively simple device configurations, and low-cost processing. Significant experimental and theoretical efforts have been achieved toward understanding fundamental behaviors and a wide range of demonstrations since its report in 2012. As a result, considerable technological advancement has been exhibited and it advances the timeline of achievement in the proposed roadmap. Now, the technology has reached the stage of prototype development with verification of performance beyond the lab scale environment toward its commercialization. In this review, distinguished authors in the world worked together to summarize the state of the art in theory, materials, devices, systems, circuits, and applications in TENG fields. The great research achievements of researchers in this field around the world over the past decade are expected to play a major role in coming to fruition of unexpectedly accelerated technological advances over the next decade.

Dynamic Pluronic F127 Crosslinking Enhancement of Biopolymeric Nanocomposites for Piezo-Triboelectric Single-Hybrid Nanogenerators and Self-Powered Sensors

Biomechanical and nanomechanical energy harvesting systems have gained a wealth of interest, resulting in a plethora of research into the development of biopolymeric-based devices as sustainable alternatives. Piezoelectric, triboelectric, and hybrid nanogenerator devices for electrical applications are engineered and fabricated using innovative, sustainable, facile-approach flexible composite films with high performance based on bacterial cellulose and BaTiO₃ , intrinsically and structurally enhanced by Pluronic F127, a micellar cross-linker. The voltage and current outputs of the modified versions with multiwalled carbon nanotube as a conductivity enhancer and post-poling effect are 38 V and 2.8 µA cm^-2 , respectively. The multiconnective devices' power density can approach 10 µW cm^-2 . The rectified output power is capable of charging capacitors, driving light-emitting diode lights, powering a digital watch and interfacing with a commercial microcontroller board to operate as a piezoresistive force sensor switch as a proof of concept. Magnetoelectric studies show that the composites have the potential to be incorporated into magnetoelectric systems. The biopolymeric composites prove to be desirable candidates for multifunctional energy harvesters and electronic devices.

Power Generation by a Limestone-Contained Putty

A novel contact-separation triboelectric generator concept is proposed in this paper, which consists of a limestone-based mounting putty and a metallized polyester (PET/Al) sheet. This is an attempt to explore tacky materials for power generation and extend the operational frequency bandwidth compared to existing TriboElectric NanoGenerators (TENGs). Moreover, the proposed design is very cost-effective and easy to build. Unlike traditional TENGs, which generate power solely due to a charge developing on the surface, the putty also replies on charge developed inside the material. Parametric study was conducted to determine the optimal putty thickness in a shaker test at 40 Hz. It was found that a putty layer at 0.6 mm thick yielded maximum power generation. During the separation phase, the electrical breakdown between triboelectric layers allows most existing electrons to flow back from the ground due to rapid charge removal at the interface. We are able to achieve a peak power of 16 mW in a shaker test at 40 Hz with an electrical load of 8 MΩ, which corresponds to a power density of 25.6 W/m². A peak power of 120 mW in a manual prototype generator is achieved, which operates at approximately 2 Hz. Since putty material has less tackiness than double-sided tape, we are able to expand the frequency bandwidth up to 80 Hz, which is significantly higher than a TENG (typically <10 Hz). The mounting putty material contains limestone with approximate 31 nm of mean grain size mixed with synthetic rubber materials. Elasticity from rubber and the nanohardness of calcite crystallites allow us to operate a putty generator repeatedly without the concern of grain fracture. Also, a durability test was conducted with up to 250,000 contact-separation cycles. In summary, comparable performance is achieved in the proposed putty generator to benefit energy harvesting and sensor applications.

0.5 m Triboelectric Nanogenerator for Efficient Blue Energy Harvesting of All-Sea Areas

Triboelectric nanogenerators (TENGs) to harvest ocean wave blue energy is flourishing, yet the research horizon has been limited to centimeter-level TENG. Here, for the first time, a TENG shell is advanced for ocean energy harvesting to 0.5 m and an excellent frictional areal density of 1.03 cm^-1 and economies of scale are obtained. The unique structure of the multi-arch shape is adopted to untie the difficulty of fully getting the extensive friction layer contact. An inside steel plate is vertically placed in the center of every TENG block, which can activate the TENG to achieve complete contact even at a tilt angle of 7 degrees. The proposed half-meter TENG (HM-TENG) has a broad response band from 0.1 to 2 Hz, a total transferred charge quantity up to 67.2 µC, and one single TENG can deliver an open-circuit voltage of 368 V. Coupled with the self-stabilizing and susceptible features the ellipsoid shell brings, the HM-TENG can readily accommodate itself to the all-weather, all-sea wave energy harvesting. Muchmore, the HM-TENG is also applied to RF signal transmitters. This work takes the first step toward near-meter-scale enclosures and provides a new direction for large-scale wave energy harvesting.

A Self-Powered Wearable Sensor for Continuous Wireless Sweat Monitoring

Wireless wearable sweat analysis devices can monitor biomarkers at the molecular level continuously and in situ, which is highly desired for personalized health care. The miniaturization, integration, and wireless operation of sweat sensors improve the comfort and convenience while also bringing forward new challenges for power supply technology. Herein, a wireless self-powered wearable sweat analysis system (SWSAS) is designed that effectively converts the mechanical energy of human motion into electricity through hybrid nanogenerator modules (HNGMs). The HNGM shows stable output characteristics at low frequency with a current of 15 mA and a voltage of 60 V. Through real-time on-body sweat analysis powered by HNGM, the SWSAS is demonstrated to selectively monitor biomarkers (Na⁺ and K⁺ ) in sweat and wirelessly transmit the sensing data to the user interface via Bluetooth.

Recent Progress of Nanogenerators for Green Energy Harvesting: Performance, Applications, and Challenges

Natural sources of green energy include sunshine, water, biomass, geothermal heat, and wind. These energies are alternate forms of electrical energy that do not rely on fossil fuels. Green energy is environmentally benign, as it avoids the generation of greenhouse gases and pollutants. Various systems and equipment have been utilized to gather natural energy. However, most technologies need a huge amount of infrastructure and expensive equipment in order to power electronic gadgets, smart sensors, and wearable devices. Nanogenerators have recently emerged as an alternative technique for collecting energy from both natural and artificial sources, with significant benefits such as light weight, low-cost production, simple operation, easy signal processing, and low-cost materials. These nanogenerators might power electronic components and wearable devices used in a variety of applications such as telecommunications, the medical sector, the military and automotive industries, and internet of things (IoT) devices. We describe new research on the performance of nanogenerators employing several green energy acquisition processes such as piezoelectric, electromagnetic, thermoelectric, and triboelectric. Furthermore, the materials, applications, challenges, and future prospects of several nanogenerators are discussed.