Electrolyte Regulation of Bio-Inspired Zincophilic Additive toward High-Performance Dendrite-Free Aqueous Zinc-Ion Batteries

Cathode|Electrolyte Interface Engineering by a Hydrogel Polymer Electrolyte for a 3D Porous High-Voltage Cathode Material in a Quasi-Solid-State Zinc Metal Battery by In Situ Polymerization

This work highlights the development of a superior cathode|electrolyte interface for the quasi solid-state rechargeable zinc metal battery (QSS-RZMB) by a novel hydrogel polymer electrolyte using an ultraviolet (UV) light-assisted in situ polymerization strategy. By integrating the cathode with a thin layer of the hydrogel polymer electrolyte, this technique produces an integrated interface that ensures quick Zn2+ ion conduction. The coexistence of nanowires for direct electron routes and the enhanced electrolyte ion infiltration and diffusion by the 3D porous flower structure with a wide open surface of the Zn-MnO electrode complements the interface formation during the in situ polymerization process. The QSS-RZMB configured with an integrated cathode (i-Zn-MnO) and the hydrogel polymer electrolyte (PHPZ-30) as the separator yields a comparable specific energy density of 214.14 Wh kg-1 with that of its liquid counterpart (240.38 Wh kg-1, 0.5 M Zn(CF3SO3)2 aqueous electrolyte). Other noteworthy features of the presented QSS-RZMB system include its superior cycle life of over 1000 charge-discharge cycles and 85% capacity retention with 99% coulombic efficiency at the current density of 1.0 A g-1, compared to only 60% capacity retention over 500 charge-discharge cycles displayed by the liquid-state system under the same operating conditions.

Achieving Dendrite-Free and By-Product-Free Aqueous Zn-Ion Battery Anode via Nicotinic Acid Electrolyte Additive with Molecule-Ion Conversion Mechanism

The widespread adoption of aqueous Zn ion batteries is hindered by the instability of the Zn anode. Herein, an elegant strategy is proposed to enhance the stability of Zn anode by incorporating nicotinic acid (NA), an additive with a unique molecule-ion conversion mechanism, to optimize the anode/electrolyte interface and the typical ZnSO4 electrolyte system. Experimental characterization and theoretical calculations demonstrate that the NA additive preferentially replaces H2O in the original solvation shell and adsorbs onto the Zn anode surface upon conversion from molecule to ion in the electrolyte environment, thereby suppressing side reactions arising from activated H2O decomposition and stochastic growth of Zn dendrites. Simultaneously, such a molecule-to-ion conversion mechanism may induce preferential deposition of Zn along the (002) plane. Benefiting from it, the Zn||Zn symmetric battery cycles stably for 2500 h at 1 mA cm-2, 1 mAh cm-2. More encouragingly, the Zn||AC full batteries and the Zn||AC full batteries using NA electrolyte and Zn||VO2 full batteries also exhibit excellent performance improvements. This work emphasizes the role of variation in the form of additives (especially weak acid-based additives) in fine-tuning the solvation structure and the anode/electrolyte interface, hopefully enhancing the performance of various aqueous metal batteries.

Rescuing zinc anode-electrolyte interface: mechanisms, theoretical simulations and in situ characterizations

The research interest in aqueous zinc-ion batteries (AZIBs) has been surging due to the advantages of safety, abundance, and high electrochemical performance. However, some technique issues, such as dendrites, hydrogen evolution reaction, and corrosion, severely prohibit the development of AZIBs in practical utilizations. The underlying mechanisms regarding electrochemical performance deterioration and structure degradation are too complex to understand, especially when it comes to zinc metal anode-electrolyte interface. Recently, theoretical simulations and in situ characterizations have played a crucial role in AZIBs and are exploited to guide the research on electrolyte engineering and solid electrolyte interphase. Herein, we present a comprehensive review of the current state of the fundamental mechanisms involved in the zinc plating/stripping process and underscore the importance of theoretical simulations and in situ characterizations in mechanism research. Finally, we summarize the challenges and opportunities for AZIBs in practical applications, especially as a stationary energy storage and conversion device in a smart grid.

Stabilizing Zn anode for high-performance Zn-Ni battery through a complexing agent electrolyte addition

Zn-Ni batteries have garnered considerable attention due to their high specific energy, consistent discharge voltage, favorable performance at low temperatures, and environmentally benign nature. Nevertheless, anode interface issues such as dendrite growth, hydrogen evolution, and interfacial side reactions lead to poor cycling stability of Zn-Ni batteries, significantly limiting their further commercial applications. In this study, we propose a facile electrolyte engineering strategy to optimize the Zn anode interfacial environment and stabilize the Zn anode by introducing tannic acid (TA) into the KOH electrolyte. The incorporated TA complexing agent addition will be used to prevent the direct contact of H2O with the anode surface and promote the desolvation of Zn2+ through complexation, thus suppressing the interfacial corrosion. Consequently, the Zn symmetric battery using TA electrolyte cycles stably for 178 h at 1 mA cm-2. The Zn-Ni full batteries with TA electrolyte maintain 98.08 % capacity retention after 2000 cycles at 20C. This study will be of immediate benefit in commercializing large-scale, practical energy storage applications.

Design Strategies toward High-Utilization Zinc Anodes for Practical Zinc-Metal Batteries

Aqueous Zn-metal batteries (AZMBs) hold a promise as the next-generation energy storage devices due to their low cost and high specific energy. However, the actual energy density falls far below the requirements of commercial AZMBs due to the use of excessive Zn as anode and the associated issues including dendritic growth and side reactions. Reducing the N/P ratio (negative capacity/positive capacity) is an effective approach to achieve high energy density. A significant amount of research has been devoted to increasing the cathode loading and specific capacity or tuning the Zn anode utilization to achieve low N/P ratio batteries. Nevertheless, there is currently a lack of comprehensive overview regarding how to enhance the utilization of the Zn anode to balance the cycle life and energy density of AZMBs. In this review, we summarize the challenges faced in achieving high-utilization Zn anodes and elaborate on the modifying strategies for the Zn anode to lower the N/P ratio. The current research status and future prospects for the practical application of high-performance AZMBs are proposed at the end of the review.

Multifunctionalized Supramolecular Cyclodextrin Additives Boosting the Durability of Aqueous Zinc-Ion Batteries

The poor cycling stability of aqueous zinc-ion batteries hinders their application in large-scale energy storage due to uncontrollable dendrite growth and harmful hydrogen evolution reactions. Here, we designed and synthesized an electrolyte additive, N-methylimidazolium-β-cyclodextrin p-toluenesulfonate (NMI-CDOTS). The cations of NMI-CD+ are more easily adsorbed on the abrupt Zn surface to regulate the deposition of Zn2+ and reduce dendrite generation under the combined action of the unique cavity structure with abundant hydroxyl groups and the electrostatic force. Meanwhile, p-toluenesulfonate (OTS-) is able to change the Zn2+ solvation structure and suppress the hydrogen evolution reaction by the strong interaction of Zn2+ and OTS-. Benefiting from the synergistic role of NMI-CD+ and OTS-, the Zn||Zn symmetric cell exhibits superior cycling performance as high as 3800 h under 1 mA cm-2 and 1 mA h cm-2. The Zn||V2O5 full battery also shows a high specific capacity (198.3 mA h g-1) under 2.0 A g-1 even after 1500 cycles, and its Coulomb efficiency is nearly 100% during the charging and discharging procedure. These multifunctional composite strategies open up possibilities for the commercial application of aqueous zinc-ion batteries.

Additives for Aqueous Zinc-Ion Batteries: Recent Progress, Mechanism Analysis, and Future Perspectives

Aqueous zinc-ion batteries (ZIBs) stand out as a promising next-generation electrochemical energy storage technology, offering notable advantages such as high specific capacity, enhanced safety, and cost-effectiveness. However, the application of aqueous electrolytes introduces challenges: Zn dendrite formation and parasitic reactions at the anode, as well as dissolution, electrostatic interaction, and by-product formation at the cathode. In addressing these electrode-centric problems, additive engineering has emerged as an effective strategy. This review delves into the latest advancements in electrolyte additives for ZIBs, emphasizing their role in resolving the existing issues. Key focus areas include improving morphology and reducing side reactions during battery cycling using synergistic effects of modulating anode interface regulation, zinc facet control, and restructuring of hydrogen bonds and solvation sheaths. Special attention is given to the efficacy of amino acids and zwitterions due to their multifunction to improve the cycling performance of batteries concerning cycle stability and lifespan. Additionally, the recent additive advancements are studied for low-temperature and extreme weather applications meticulously. This review concludes with a holistic look at the future of additive engineering, underscoring its critical role in advancing ZIB performance amidst the complexities and challenges of electrolyte additives.

Erythritol as a Saccharide Multifunctional Electrolyte Additive for Highly Reversible Zinc Anode

Dendrite formation and water-triggered side reactions on the surface of Zn metal anodes severely restrict the commercial viability of aqueous zinc-ion batteries (AZIBs). In this work, we introduce erythritol (Et) as an electrolyte additive to enhance the reversibility of zinc anodes, given its cost-effectiveness, mature technology, and extensive utilization in various domains such as food, medicine, and other industries. By combining multiscale theoretical simulation and experimental characterization, it was demonstrated that Et molecules can partially replace the coordination H2O molecules to reshape the Zn2+ solvation sheath and destroy the hydrogen bond network of the aqueous electrolyte. More importantly, Et molecules tend to adsorb on the zinc anode surface, simultaneously inhibit water-triggered side reactions by isolating water and promote uniform and dense deposition by accelerating the Zn2+ diffusion and regulating the nucleation size of the Zn grain. Thanks to this synergistic mechanism, the Zn anode can achieve a cycle life of more than 3900 h at 1 mA cm-2 and an average Coulombic efficiency of 99.77%. Coupling with δ-MnO2 cathodes, the full battery delivers a high specific capacity of 228.1 mAh g-1 with a capacity retention of 76% over 1000 cycles at 1 A g-1.

A Perspective of Bioinspired Interfaces Applied in Renewable Energy Storage and Conversion Devices

The natural world renders a large number of opportunities to design intriguing structures and fascinating functions for innovations of advanced surfaces and interfaces. Currently, bioinspired interfaces have attracted much attention in practical applications of renewable energy storage and conversion devices including rechargeable batteries, fuel cells, dye-sensitized solar cells, and supercapacitors. By mimicking miscellaneous natural creatures, many novel bioinspired interfaces with various components, structures, morphology, and configurations are exerted on the devices' electrodes, electrolytes, additives, separators, and catalyst matrixes, resorting to their wonderful mechanical, optical, electrical, physical, chemical, and electrochemical features compared with the corresponding traditional modes. In this Perspective, the principles of designing bioinspired interfaces are discussed with respect to biomimetic chemical components, physical morphologies, biochemical reactions, and macrobiomimetic assembly configurations. A brief summary, subsequently, is mainly focused on the recent progress on bioinspired interfaces applied in key materials for rechargeable batteries. Ultimately, a critical comment is projected on significant opportunities and challenges existing in the future development course of bioinspired interfaces. It is expected that this Perspective is able to provide a profound perception into some underlying artificial intelligent energy storage and conversion device design as a promising candidate to resolve the global energy crisis and environmental pollution.

Inert Group-Containing Electrolyte Additive Enabling Stable Aqueous Zinc-Ion Batteries

Aqueous zinc ion batteries (AZIBs) are considered promising energy storage devices because of their high theoretical energy density and cost-effectiveness. However, the ongoing side reactions and zinc dendrite growth during cycling limit their practical application. Herein, trisodium methylglycine diacetate (Na3MGDA) additive containing the additional inert group methyl is introduced for Zn anode protection, and the contribution of methyl as an inert group to the Zn anode stability is discussed. Experimental results reveal that the methyl group with various effects enhances the interaction between the polar groups in Na3MGDA and the Zn2+/Zn anode. Thus, the polar carboxylate negative ions in MGDA anions can more easily modify the solvation structure and adsorb on the anode surface in situ to establish a hydrophobic electrical double layer (EDL) layer with steric hindrance effects. Such the EDL layer exhibits a robust selectivity for Zn deposition and a significant inhibition of parasitic reactions. Consequently, the Zn||Zn symmetric battery presents 2375 h at 1 mA cm-2, 1 mAh cm-2, and the Zn||V6O13 full battery provides 91% capacity retention after 1300 cycles at 3 A g-1. This study emphasizes the significant role of inert groups of the additive on the interfacial stability during the plating/stripping of high-performance AZIBs.

A Hydrogel Electrolyte with High Adaptability over a Wide Temperature Range and Mechanical Stress for Long-Life Flexible Zinc-Ion Batteries

Flexible zinc-ion batteries have garnered significant attention in the realm of wearable technology. However, the instability of hydrogel electrolytes in a wide-temperature range and uncontrollable side reactions of the Zn electrode have become the main problems for practical applications. Herein, N,N-dimethylformamide (DMF) to design a binary solvent (H2 O-DMF) is introduced and combined it with polyacrylamide (PAM) and ZnSO4 to synthesize a hydrogel electrolyte (denoted as PZD). The synergistic effect of DMF and PAM not only guides Zn2+ deposition on Zn(002) crystal plane and isolates H2 O from the Zn anode, but also breaks the hydrogen bonding network between water to improve the wide-temperature range stability of hydrogel electrolytes. Consequently, the symmetric cell utilizing PZD can stably cycle over 5600 h at 0.5 mA cm- 2 @0.5 mAh cm-2 . Furthermore, the Zn//PZD//MnO2 full cell exhibits favorable wide-temperature range adaptability (for 16000 cycles at 3 A g-1 under 25 °C, 750 cycles with 98 mAh g-1 at 0.1 A g-1 under -20 °C) and outstanding mechanical properties (for lighting up the LEDs under conditions of pressure, bending, cutting, and puncture). This work proposes a useful modification for designing a high-performance hydrogel electrolyte, which provides a reference for investigating the practical flexible aqueous batteries.

Unveiling the Potential of the Alkyl Chain of Isoleucine for Regulating the Electrical Double Layer and Enhancing the Zinc-Ion Battery Performance

Amino acids are considered effective additives for regulating the electric double layer (EDL) in zinc-ion battery (ZIB) electrolytes. In comparison to their polar counterparts, nonpolar amino acids have received less attention in research. We demonstrated that isoleucine (ILE), benefiting from its nonpolar alkyl chain, emerges as a highly suitable electrolyte additive for aqueous ZIBs. ILE molecules preferentially adsorb onto the anode surface of zinc metal, subsequently creating a locally hydrophobic EDL facilitated by the alkyl chain. On one hand, this enhances the thermodynamic stability at the anode, while on the other hand, it accelerates the desolvation process of zinc ions, thereby improving the kinetics. Benefiting from the unique properties of ILE molecules, Cu//Zn cells with the ILE additive ultimately achieved an extended cycle life of 2600 cycles with an average coulombic efficiency of 99.695%, significantly outperforming other amino acid additives reported in the literature.

Highly stable and reversible Zn anodes enabled by an electrolyte additive of sucrose

Aqueous zinc-ion batteries (ZIBs) are one of the most promising candidates for electric energy storage devices due to their merits of low cost and high safety. However, the notorious side reactions and dendrite formation on zinc anodes impede the commercialization of ZIBs. In this work, a cheap and edible electrolyte additive sucrose is applied to address the above issues. Sucrose with hydroxyl groups can react as zincophilic sites to adsorb Zn2+. As verified by Raman and FT-IR spectroscopy, the solvation structure of Zn2+ and the hydrogen bonds can be regulated by the sucrose molecule. The weakened solvated structure of Zn2+ and lowered coupling degree between Zn2+ and SO42- can inhibit the hydrogen evolution reaction (HER) and the generation of the sulfate by-product. Furthermore, a solid electrolyte interphase (SEI)-like ion buffer layer is formed because of the preferentially adsorbed sucrose, which can increase the nucleation overpotential and equalize the ion distribution. The enriched Zn nucleation sites and inhibited 2D diffusion of Zn2+ resulting from the sucrose additive enable uniform Zn deposition. Thus, improved performances of symmetric Zn||Zn, asymmetric Zn||Cu and Zn||VO2 cells are realized. The Zn||Zn cell exhibits a highly reversible cycling performance for 1200 h and 400 h at 5 mA cm-2/1 mA h cm-2 and 10 mA cm-2/5 mA h cm-2, respectively. This work provides a readily available and edible additive to improve the performance of ZIBs.

Synergistic Modulation of Mass Transfer and Parasitic Reactions of Zn Metal Anode via Bioinspired Artificial Protection Layer

Rechargeable aqueous zinc-ion batteries are regarded as promising energy storage devices due to their attractive economic benefits and extraordinary electrochemical performance. However, the sluggish Zn2+ mass transfer behavior and water-induced parasitic reactions that occurred on the anode-electrode interface inevitably restrain their applications. Herein, inspired by the selective permeability and superior stability of plasma membrane, a thin UiO-66 metal-organic framework layer with smart aperture size is ex-situ decorated onto the Zn anode. Experimental characterizations in conjunction with theoretical calculations demonstrate that this bio-inspired layer promotes the de-solvation process of hydrated Zn2+ and reduces the effective contact between the anode and H2 O molecules, thereby boosting Zn2+ deposition kinetics and restraining interfacial parasitic reactions. Hence, the Zn||Zn cells could sustain a long lifespan of 1680 h and the Zn||Cu cells yielded a stable coulombic efficiency of over 99.3% throughout 600 cycles under the assistance of the bio-inspired layer. Moreover, pairing with δ-MnO2 cathode, the full cells also demonstrate prominent cycling stability and rate performance. From the bio-inspired design philosophy, this work provides a novel insight into the development of aqueous batteries.

Less is More: Underlying Mechanism of Zn Electrode Long-Term Stability using Sodium L-Ascorbate as Electrolyte Additive

Structured passivation layers and hydrated Zn2+ solvation structure strongly influence Zn depositions on Zn electrodes and then the cycle life and electrochemical performance of aqueous zinc ion batteries. To achieve these, the electrolyte additive of sodium L-ascorbate (Ass) is introduced into aqueous zinc sulfate (ZnSO4 , ZS) electrolyte solutions. Combined experimental characterizations with theoretical calculations, the unique passivation layers with vertical arrayed micro-nano structure are clearly observed, as well as the hydrated Zn2+ solvation structure is changed by replacing two ligand water molecules with As- , thus regulating the wettability and interfacial electric field intensity of Zn surfaces, facilitating rapid ionic diffusions within electrolytes and electrodes together with the inhibited side reactions and uniform depositions of Zn2+ . When tested in Zn||Zn symmetric cell, the electrolyte containing Ass is extraordinarily stably operated for the long time ≈3700 h at both 1 mA cm-2 and 1 mAh cm-2 . In Zn||MnO2 full coin cells, the energy density can still maintain as high as ≈184 Wh kg-1 at the power density high up to 2 kW kg-1 , as well as the capacity retention can reach up to 80.5% even after 1000 cycles at 2 A g-1 , which are substantially superior to the control cells.

Janus interface enables reversible Zn-ion battery by regulating interfacial water structure and crystal-orientation

To tackle the shortcomings of traditional battery systems, there has been much focus on aqueous Zn-ion batteries due to various advantages. However, they still suffer from poor stability of Zn anodes. Here, a methionine additive with unique Janus properties is proposed to regulate the behavior of the interface between Zn anodes and the electrolyte environment. Systematic characterizations as well as calculations elucidate that the Janus additive is adsorbed on the Zn anode via zincophilic -NH2, changing the structure of the electric double layer and breaking the hydrogen bonding network among H2O molecules through hydrophobic S-CH3. At the same time, it can induce preferential formation of Zn(101) with high reversibility. The above two functions contribute to the dendrite inhibiting ability of Zn anodes. As validated, fabricated Zn//Zn symmetric cells achieve stable cycles of 4500 h, 1165 h, and 318 h at 1, 5 and 10 mA cm-2/mA h cm-2, respectively. Furthermore, Zn//Cu asymmetric cells with an average coulombic efficiency of 98.9% for 2200 stable cycles can be realized. Finally, Zn//MnO2 full cells exhibit 79.9% capacity retention with an ultra-high coulombic efficiency of 99.9% for 1000 cycles, much better than that of the pure Zn(ClO4)2 system, indicating the great potential of this useful strategy in aqueous batteries.

A Fluorinated Solid-state-electrolyte Interface Layer Guiding Fast Zinc-ion Oriented Deposition in Aqueous Zinc-ion Batteries

Aqueous zinc ion batteries are gaining popularity due to their high energy density and environmental friendliness. However, random deposition of zinc ions on the anode and sluggish migration of zinc ions on the interface would lead to the growth of zinc dendrites and poor cycling performance. To address these challenges, we developed a fluorinated solid-state-electrolyte interface layer composed of Ca5 (PO4 )3 F/Zn3 (PO4 )2 via an in situ ion exchange strategy to guide zinc-ion oriented deposition and fast zinc ion migration on the anode during cycling. The introduction of Ca5 (PO4 )3 F (FAP) can increase the nucleation sites of zinc ions and guide the oriented deposition of zinc ions along the (002) crystal plane, while the in situ formation of Zn3 (PO4 )2 during cycling can accelerate the migration of zinc ions. Benefited from our design, the assembled Zn//V2 O5  ⋅ H2 O batteries based on FAP-protected Zn anode (FAP-Zn) achieve a higher capacity retention of 84 % (220 mAh g-1 ) than that of bare-Zn based batteries, which have a capacity retention of 23 % (97 mAh g-1 ) at 3.0 A g-1 after 800 cycles. This work provides a new solution for the rational design and development of the solid-state electrolyte interface layer to achieve high-performance zinc-ion batteries.

Kinetics Conditioning of (Electro) Chemically Stable Zn Anode with pH Regulation Toward Long-Life Zn-Storage Devices

The safety, low cost, and high power density of aqueous Zn-based devices (AZDs) appeal to large-scale energy storage. Yet, the presence of hydrogen evolution reaction (HER) and chemical corrosion in the AZDs leads to local OH- concentration increasement and the formation of Znx SOy (OH)z •nH2 O (ZHS) by-products at the Zn/electrolyte interface, causing instability and irreversibility of the Zn-anodes. Here, a strategy is proposed to regulate OH- by introducing a bio-sourced/renewable polypeptide (ɛ-PL) as a pH regulator in electrolyte. The consumption of OH- species is evaluated through in vitro titration and cell in vivo in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy at a macroscopic and molecular level. The introduction of ɛ-PL is found to significantly suppress the formation of ZHS and associated side reactions, and reduce the local coordinated H2 O of the Zn2+ solvation shell, widening electrochemical stable window and suppressing OH- generation during HER. As a result, the inclusion of ɛ-PL improves the cycle time of Zn/Zn symmetrical cells from 15 to 225 h and enhances the cycle time of aqueous Zn- I2 cells to 1650 h compared to those with pristine electrolytes. This work highlights the potential of kinetical OH- regulation for by-product and dendrite-free AZDs.

Molecularly modulating solvation structure and electrode interface enables dendrite-free zinc-ion batteries

The performance of aqueous Zn ion batteries (AZIBs) is hindered by the uncontrollable growth of Zn dendrites and side reactions at the Zn anode/electrolyte interface. Here, we introduce low-cost glucosamine hydrochloride (GLA) into the ZnSO4 electrolyte system to modulate the Zn anode/electrolyte interface and the solvation structure of Zn2+, which leads to improved reversibility of Zn plating/striping. Through experimental and theoretical analyses, we demonstrate that GLA molecules could adsorp on the Zn metal surface to form a new interface with reduced active water, effectively suppressing water-induced side reactions. Moreover, after adding GLA, the flux of Zn2+ ions is regulated, the desolvation of the primary [Zn(H2O)6]2+ ions is promoted, and the Zn dendrite growth is significantly inhibited. Consequently, superior cyclic stability with a lower voltage hysteresis is simultaneously achieved in a Zn//Zn symmetric cell. When coupled with the Mn3O4 cathode, the fabricated Zn-Mn batteries with the modified ZnSO4 + GLA electrolyte system deliver boosted capacity, improved long-term cycling stability, and better self-discharge performance. This work provides insight into the development of high-efficient and low-cost electrolytes for high-performance Zn-based energy storage devices.

Working mechanism of MXene as the anode protection layer of aqueous zinc-ion batteries

In recent years, the research on intrinsically safe aqueous zinc-ion batteries (AZIBs) has gained significant attention. However, the commercialization of AZIBs is hindered because of the formation of dendrites in them and undesired hydrogen evolution reaction (HER) at their anode. MXene is a promising two-dimensional material that can inhibit dendrite growth and undesired HER at the anode when used as a protective layer for the anode in AZIBs. MXene's surface functional groups play a crucial role in this protective function. However, the working mechanisms of these surface functional groups have not been thoroughly understood. Based on first-principles calculations and molecular dynamics simulation, we investigated the mechanisms of MXene with nine surface functional groups, including oxygen and halogen elements, as an anode protection layer. We checked their structural stability, electronic structure, adsorption energy, HER reaction free energy, Zn2+ diffusion energy barriers, coordination number of Zn2+- H2O and diffusion coefficients of Zn2+. The MXene species with -S and -O functional groups exhibit good electrical conductivity and greatly adsorb Zn2+. Conversely, MXene species with halogen-functional groups significantly inhibit HER reactions. MXene materials with -Se functional group have the best desolvation effect (ΔCN = 0.31), while those with -I end group have the fastest ability to diffuse zinc ion. This research provides a theoretical guidance for the design of MXene based anode protection layers, which can help to develop dendrite-free and low side-reaction AZIBs.

Electrolyte Additives for Stable Zn Anodes

Zn-ion batteries are regarded as the most promising batteries for next-generation, large-scale energy storage because of their low cost, high safety, and eco-friendly nature. The use of aqueous electrolytes results in poor reversibility and leads to many challenges related to the Zn anode. Electrolyte additives can effectively address many such challenges, including dendrite growth and corrosion. This review provides a comprehensive introduction to the major challenges in and current strategies used for Zn anode protection. In particular, an in-depth and fundamental understanding is provided of the various functions of electrolyte additives, including electrostatic shielding, adsorption, in situ solid electrolyte interphase formation, enhancing water stability, and surface texture regulation. Potential future research directions for electrolyte additives used in aqueous Zn-ion batteries are also discussed.

Negatively Charged Hydrophobic Carbon Nano-Onion Interfacial Layer Enabling High-Rate and Ultralong-Life Zn-Based Energy Storage

Zn-based electrochemical energy storage (EES) systems are attracting more attention, whereas their large-scale application is restricted by the dendrite and parasitic reaction-caused unstable Zn anodes. Herein, a negatively charged hydrophobic carbon nano-onion (CNO) interfacial layer is proposed to realize ultrastable and high-rate Zn anodes, enabling high-performance Zn-based EES. For the CNO interfacial layer, its hydrophobicity not only blocks active water but also reduces the Zn2+ desolvation barrier, and meanwhile, the negatively-charged CNO nanoparticles adsorb Zn2+ and repel SO4 2- to homogenize Zn2+ flux, accelerate Zn2+ desolvation and suppress the self-corrosion of Zn anodes. Besides, the conductive CNO interfacial layer increases the surface area for the Zn deposition to reduce local current density. Consequently, under the modulation of the CNO interfacial layer, Zn plating/stripping exhibits impressive reversibility with an average Coulombic efficiency of 99.4% over 800 cycles, and Zn anodes present significantly enhanced electrochemical stability and rate performance, whose operation lifetime exceeds 2000 h at 1 mA cm-2 and 350 h even at 10 mA cm-2 . Moreover, high-rate and ultralong-life Zn-ion hybrid supercapacitors are achieved with the CNO interfacial layer-modulated Zn anode and activated CNO cathode. This work provides new thinking in regulating the Zn deposition interface to realize high-performance Zn-based EES.

Interface regulation of the Zn anode by using a low concentration electrolyte additive for aqueous Zn batteries

The Zn metal anode in aqueous Zn batteries faces a number of challenges including instable deposition and corrosion issues. Here, we present an interface environment regulation for a Zn electrode with a low concentration electrolyte additive of 0.1 m 3-aminobenzenesulfonic acid (ASA). ASA prefers to adsorb on the Zn surface over water and creates an ASA-rich interface. It further enters the Zn2+ solvation sheath locally, which shifts the lowest unoccupied molecular orbital from solvated water to ASA. The hydrogen evolution reaction from solvated water reduction is inhibited, and the reduction of solvated ASA generates a stable solid-electrolyte interphase composed of the ion conductor ZnS covered by organic-inorganic mixed components. With the resulting homogenized Zn deposition, continuous Zn stripping in symmetric cells reaches 99.7% depth of discharge (DOD) at a current density of 2 mA cm-2, whereas cell short-circuit takes place at 11.4% DOD in the ASA free ZnSO4 electrolyte. The repeated stripping/plating also realizes 1100 h cycle life at 2 mA cm-2, and a 99.54% stabilized coulombic efficiency is obtained for 500 cycles at 10 mA cm-2.

Efficient Suppression of Dendrites and Side Reactions by Strong Electrostatic Shielding Effect via the Additive of Rb2 SO4 for Anodes in Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) have attracted considerable attention due to their low cost and environmental friendliness. However, the rampant dendrite growth and severe side reactions during plating/stripping on the surface of zinc (Zn) anode hinder the practicability of AZIBs. Herein, an effective and non-toxic cationic electrolyte additive of Rb2 SO4 is proposed to address the issues. The large cation of Rb+ is preferentially adsorbed on the surface of Zn metal to induce a strong shielding effect for realizing the lateral deposition of Zn2+ ions along the Zn surface and isolating water from Zn metal to effectively inhibit side reactions. Consequently, the Zn||Zn symmetric cell with the addition of 1.5 mm Rb2 SO4 can cycle more than 6000 h at 0.5 mA cm-2 /0.25 mAh cm-2 , which is 20 times longer than that without Rb2 SO4 . Besides, the Zn||Cu asymmetric cell with Rb2 SO4 achieves a very high average Coulombic efficiency of 99.16% up to 500 cycles. Moreover, the electrolyte with Rb2 SO4 well matches with the VO2 cathode, achieving high initial capacity of 412.7 mAh g-1 at 5 A g-1 and excellent cycling stability with a capacity retention of 71.6% at 5 A g-1 after 500 cycles for the Zn//VO2 full cell.

The Organic Ligand Etching Method for Constructing In Situ Terraced Protective Layer Toward Stable Aqueous Zn Anode

The stability of aqueous Zn-ion batteries (AZIBs) is highly dependent on the reversibility of stripping/plating Zn anode. In this work, an organic ligand etching method is proposed to develop a series of in situ multifunctional protective layers on Zn anode. Particularly, the 0.02 m [Fe(CN) 6]3- etching solutions can spontaneously etch the Zn anode, creating an in situ protective layer with unique terraced structure, which blocks the direct contact between the electrode and electrolyte and increases the area for Zn2+ ions deposition. Interestingly, all elements in the organic ligands (i.e., C, N, Zn, and Fe) exhibit strong zincophilic, significantly promoting zinc deposition kinetics and enhancing 3D nucleation behavior to inhibit zinc dendrite growth. As a result, the etched Zn anode can provide as high a Coulombic efficiency of 99.6% over 1000 cycles and sustain over 400 h long-term stability at a high current density of 10 mA cm-2 . As general validation, the small amount of metal cations additives (e.g., Ni2+ , Mn2+ , and Cu2+ ) can accelerate the synthesis of artificial interface layers with 3D structures and also regulate zinc deposition behavior. This work provides a new idea from the perspective of etching solution selection for surface modification of Zn metal anode.

Transforming Dye Molecules into Electrochemical Allies: Direct Red 80 as a Dual-Functional Electrolyte Additive for Dendrite-Free Aqueous Zinc-Ion Batteries

Despite the numerous advantages of abundant zinc resources, low redox potential, and affordability, aqueous zinc-ion batteries (AZIBs) currently face limitations due to dendritic growth and side reactions. This study explores the use of low-cost and efficient anionic dyes, specifically Direct Red 80 (DR80) as dual-functional electrolyte additives to enhance the electrochemical performance of AZIBs and facilitate the reuse of dye wastewater. Experimental and theory calculation results all demonstrate that the DR80 molecules readily adsorb onto the surface of the zinc anode, creating a stable and robust solid electrolyte interphase layer. This layer acts as a protective barrier, effectively mitigating H+ attacks and reducing both hydrogen evolution and corrosion reactions. Additionally, it covers any initial protrusions on the zinc anode, preventing the occurrence of the "tip-effect" phenomenon and limiting access of water to the zinc anode, thereby minimizing water decomposition. Moreover, the sulfonic acid groups of DR80 molecules displace some water molecules in [Zn(H2O)6]2+, disrupting the original solvent sheath and reducing water decomposition. Especially, using the DR80 additive, the Zn/Zn cell reaches an impressive cycle life of 1500 h at 2 mA cm-2@1 mAh cm-2. Given the low cost and widespread availability, this additive shows great potential in the future practical implementation of AZIBs.

Adaptive Ionization-Induced Tunable Electric Double Layer for Practical Zn Metal Batteries over Wide pH and Temperature Ranges

The violent side reactions of Zn metal in aqueous electrolyte lead to sharp local-pH fluctuations at the interface, which accelerate Zn anode breakdown; thus, the development of an optimization strategy to accommodate a wide pH range is particularly critical for improving aqueous Zn metal batteries. Herein, we report a pH-adaptive electric double layer (EDL) tuned by glycine (Gly) additive with pH-dependent ionization, which exhibits excellent capability to stabilize Zn anodes in wide-pH aqueous electrolytes. It is discovered that a Gly-ionic EDL facilitates the directed migration of charge carriers in both mildly acidic and alkaline electrolytes, leading to the successful suppression of local saturation. It is worth mentioning that the regulation effect of the additive concentration on the inner Helmholtz plane (IHP) structure of Zn electrodes is clarified in depth. It is revealed that the Gly additives without dimerization can develop orderly and dense vertical adsorption within the IHP to effectively reduce the EDL repulsive force of Zn2+ and isolate H2O from the anode surface. Consequently, they Zn anode with tunable EDL exhibits superior electrochemical performance in a wide range of pH and temperature, involving the prodigious cycle reversibility of 7000 h at Zn symmetric cells with ZnSO4-Gly electrolytes and an extended lifespan of 50 times in Zn symmetric cells with KOH-Gly electrolytes. Moreover, acidic Zn powder||MnO2 pouch cells, and alkaline high-voltage Zn||Ni0.8Co0.1Mn0.1O2 cells, and Zn||NiCo-LDH cells also deliver excellent cycling reversibility. The tunable EDL enables the ultrahigh depth of discharge (DOD) of 93%. This work elucidates the design of electrolyte additives compatible in a wide range of pH and temperature, which might cause inspiration in the fields of practical multiapplication scenarios for Zn anodes.

Engineering Fluorine-rich Double Protective Layer on Zn Anode for Highly Reversible Aqueous Zinc-ion Batteries

The high thermodynamic instability and side reactions of Zn-metal anode (ZMA), especially at high current densities, greatly impede the commercialization of aqueous zinc-ion batteries (AZIBs). Herein, a fluorine-rich double protective layer strategy is proposed to obtain the high reversibility of AZIBs through the introduction of a versatile tetradecafluorononane-1,9-diol (TDFND) additive in aqueous electrolyte. TDFND molecule with large adsorption energy (-1.51 eV) preferentially absorbs on the Zn anode surface to form a Zn(OR)2 - (R=-CH2 -(CF2 )7 -CH2 -) cross-linking complex network, which balances space electric field and controls the Zn2+ ion flux, thus enabling the uniform and compact deposition of Zn (002) crystal planes. Meanwhile, TDFND with low Lowest unoccupied molecular orbital (LUMO, 0.10 eV) energy level is priorly decomposed to regulate the interfacial chemistry of ZMA by building a ZnF2 -rich solid electrode/electrolyte interface (SEI) layer. It is found that a 14 nm-thick SEI layer delivers excellent structural integrity to suppress parasitic reactions by blocking the direct contact of active water and ZMA. Consequently, the Zn electrode exhibits a superior cycling life over 430 h at 10 mA cm-2 and a high average Coulombic efficiency of 99.8 % at 5 mA cm-2 . Furthermore, a 68 mAh pouch cell delivers 80.3 % capacity retention for 1000 cycles.

Subnanocyclic Molecule of 15-Crown-5 Inhibiting Interfacial Water Decomposition and Stabilizing Zinc Anodes via Regulation of Zn2+ Solvation Shell

Aqueous zinc ion batteries exhibit a promising application prospect for next-generation energy storage devices. However, the decomposition of active H2O molecules on the Zn anode induces drastic dendrite formation, thereby impairing the performance for entire devices. To solve this challenge, we introduce subnanocyclic molecules of 15-Crown-5 as an additive into ZnSO4 electrolyte to stabilize the Zn anode. Owing to the binding property of crown ethers with alkali metal ions and the size-fit rule, the 15-Crown-5 additives enable effective regulation of the solvation structure of hydrated Zn2+ and reduce the efficient contact between Zn anode and active H2O, which are validated by the experimental analysis and theoretical calculations. Under the assistance of the 15-Crown-5 additive, the as-assembled Zn-based batteries deliver superior performance compared with ZnSO4 and 18-Crown-6contaning ZnSO4 electrolytes. This work shows a bright direction toward progress in aqueous batteries.

Electrolyte Modulation of Biological Chelation Additives toward a Dendrite-Free Zn Metal Anode

Aqueous zinc-ion batteries are considered promising energy storage devices due to their superior electrochemical performance. Nevertheless, the uncontrolled dendrites and parasitic side reactions adversely affect the stability and durability of the Zn anode. To cope with these issues, inspired by the chelation behavior between metal ions and amino acids in the biological system, glutamic acid and aspartic acid are selected as electrolyte additives to stabilize the Zn anode. Experimental characterizations in conjunction with theoretical calculation results indicate that these additives can simultaneously modify the solvation structure of hydrated Zn2+ and preferentially adsorb onto the Zn anode, thereby restricting the occurrence of interfacial side reactions and enhancing the performance of the Zn anode. Benefiting from these synergistic effects, the as-assembled Zn-based batteries containing additive electrolytes achieved admirable electrochemical performance. From the viewpoint of electrolyte regulation, this work provides a bright direction toward the development of aqueous batteries.

Maximizing Electrostatic Polarity of Non-Sacrificial Electrolyte Additives Enables Stable Zinc-Metal Anodes for Aqueous Batteries

Although additives are widely used in aqueous electrolytes to inhibit the formation of dendrites and hydrogen evolution reactions on Zn anodes, there is a lack of rational design principles and systematic mechanistic studies on how to select a suitable additive to regulate reversible Zn plating/stripping chemistry. Here, using saccharides as the representatives, we reveal that the electrostatic polarity of non-sacrificial additives is a critical descriptor for their ability to stabilize Zn anodes. Non-sacrificial additives are found to continuously modulate the solvation structure of Zn ions and form a molecular adsorption layer (MAL) for uniform Zn deposition, avoiding the thick solid electrolyte interphase layer due to the decomposition of sacrificial additives. A high electrostatic polarity renders sucrose the best hydrated Zn2+ desolvation ability and facilitates the MAL formation, resulting in the best cycling stability with a long-term reversible plating/stripping cycle life of thousands of hours. This study provides theoretical guidance for the screening of optimal additives for high-performance ZIBs.

Tuning the Electrode/Electrolyte Interface Enabled by a Trifunctional Inorganic Oligomer Electrolyte Additive for Highly Stable and High-Rate Zn Anodes

The practical application of aqueous Zn-ion batteries is still greatly hindered by the unstable Zn anode with severe Zn dendrites growth and side reactions. As it is accessible and economical, the exploitation of electrolyte additives is one of the most promising strategies to stabilize the Zn electrode/electrolyte interface. Herein, the penta-potassium triphosphate (KTPP) as a novel trifunctional electrolyte additive is introduced to tune the electrode/electrolyte interface. First, the KTPP additive can induce an ion-conducting and mechanically robust solid electrolyte interphase film to stabilize the Zn anode. Second, the KTPP can complex with Zn2+ ions to reconstitute the dissolution sheath structure of the Zn2+ ion. Finally, the K+ cations in KTPP adsorb on the tips of the Zn anode surface as a shielding film to regulate Zn2+ ion flux. As a result, Zn//Zn symmetric cells can achieve significantly prolonged cycling stability (e.g., from 1077 to 3800 h at 1 mA cm-2 /1 mAh cm-2 , from 256 to 2500 h at 2 mA cm-2 /2 mAh cm-2 ), and ultrahigh cumulative capacity of 6400/7200 mAh cm-2 at high current density (40/20 mA cm-2 ). A four-layer Zn-MnO2 pouch full cell with a high capacity of 9 mAh can be constructed, showing impressive practical application potential.

Construction of Microporous Zincophilic Interface for Stable Zn Anode

Aqueous zinc ion batteries (AZIBs) are promising electrochemical energy storage devices due to their high theoretical specific capacity, low cost, and environmental friendliness. However, uncontrolled dendrite growth poses a serious threat to the reversibility of Zn plating/stripping, which impacts the stability of batteries. Therefore, controlling the disordered dendrite growth remains a considerable challenge in the development of AZIBs. Herein, a ZIF-8-derived ZnO/C/N composite (ZOCC) interface layer was constructed on the surface of the Zn anode. The homogeneous distribution of zincophilic ZnO and the N element in the ZOCC facilitates directional Zn deposition on the (002) crystal plane. Moreover, the conductive skeleton with a microporous structure accelerates Zn²⁺ transport kinetics, resulting in a reduction in polarization. As a result, the stability and electrochemical properties of AZIBs are improved. Specifically, the ZOCC@Zn symmetric cell sustains over 1150 h at 0.5 mA cm^-2 with 0.25 mA h cm^-2, while the ZOCC@Zn half-cell achieves an outstanding Coulombic efficiency of 99.79% over 2000 cycles. This work provides a simple and effective strategy for improving the lifespan of AZIBs.