Selective CO2 Electroreduction to Formate on Polypyrrole-Modified Oxygen Vacancy-Rich Bi2 O3 Nanosheet Precatalysts by Local Microenvironment Modulation

Synthesis of Nanosheets from Layered Bismuth Oxide Bi2.2Sr1.8CaFe2O9 without Using Organic Exfoliation Agents

Bismuth oxide nanosheets were synthesized through the exfoliation of layered compounds without any organic exfoliation agents. The layered compound Bi2.2Sr1.8CaFe2O9, comprising Bi-O layers and Sr-Ca-Fe-O layers, was synthesized as the starting material. The Sr-Ca-Fe-O layers were selectively dissolved by shaking the compound in 0.3 M HNO3 solution, yielding aggregates consisting solely of bismuth oxide layers. Subsequent ultrasonic treatment of these aggregates in pure water led to the formation of bismuth oxide nanosheets. The bismuth oxide nanosheet exhibited a higher photocatalytic activity for H2 production compared to α-Bi2O3. Characterization using FE-SEM, AFM, and HAADF-STEM revealed that these nanosheets exhibit a complex structure. They consist of a crystalline nanosheet framework of ε-bismuth oxide, interspersed with island-like regions of amorphous or crystalline bismuth oxide. Additionally, self-standing membranes of bismuth oxide nanosheets, aligned in the [001] direction, were successfully synthesized. This method, which involves the partial dissolution of the layered structure through acid treatment followed by ultrasonic processing in water, is anticipated to be applicable to other layered compounds as well.

In2O3/Bi2O3 interface induces ultra-stable carbon dioxide electroreduction on heterogeneous InBiOx catalyst

The electrochemical reduction of CO2 (ERCO2) has emerged as one of the most promising methods for achieving both renewable energy storage and CO2 recovery. However, achieving both high selectivity and stability of catalysts remains a significant challenge. To address this challenge, this study investigated the selective synthesis of formate via ERCO2 at the interface of In2O3 and Bi2O3 in the InBiO6 composite material. Moreover, InBiO6 was synthesized using indium-based metal-organic frameworks as precursor, which underwent continuous processing through ion exchange and thermal reduction. The results revealed that the formate Faradaic efficiency (FEformate) of InBiO6 reached nearly 100 % at -0.86 V vs. reversible hydrogen electrode (RHE) and remained above 90 % after continuous 317-h electrolysis, which exceeded those of previously reported indium-based catalysts. Additionally, the InBiO6 composite material exhibited an FEformate exceeding 80 % across a wide potential range of 500 mV from -0.76 to -1.26 V vs. RHE. Density-functional theory analysis confirmed that the heterogeneous interface of InBiO6 played a role in achieving optimal free energies for *OCHO on its surface. Furthermore, the addition of Bi to the InBiO6 matrix facilitated electron transfer and altered the electronic structure of In2O3, thereby enhancing the adsorption, decomposition, and formate production of *OCHO.

Copper as an Electron Hunter for Enhancing Bi2O2CO3 Electrocatalytic CO2 Conversion to Formate

Cu-doped Bi2O2CO3 catalyst with copper (Cu) acting an electron hunter for conversion of carbon dioxide into formate is developed. The Cu-Bi2O2CO3 catalyst with hollow microsphere structure extends the duration of CO2 retention on the catalyst, providing a greater number of active sites. It exhibits remarkable performance with conversion efficacy of 98.5% and current density of 800 mA cm-2 across a wide potential window (-0.8 to -1.3 V vs RHE). Density functional theory investigations reveal that the presence of copper (Cu) significantly enhances the charge density at the active sites and influences the local electronic structure of bismuth (Bi), thereby reducing the energy barrier associated with the transformation of *OCHO species into formate.

Hierarchical Nanostructures CuBi2O4 Integrated with Polyaniline Nanofibrous for Boosting Hole Extraction in Carbon-Based Perovskite Solar Cells

Toward commercialization of carbon-based perovskite solar cells (C-PSCs), it is crucial to innovatively design inorganic hole transport layer materials that excel in extracting and transporting charge carriers to promote their photoelectric conversion efficiency (PCE). In this work, a novel and high-connectivity CuBi2O4-polyaniline nanofibrous (CuBi2O4-PN) reticular structure is created by integrating CuBi2O4 hierarchical microspheres (CuBi2O4 MS) with polyaniline nanofibrous. The introduction of CuBi2O4-PN as a hole transport layer (HTL) notably enhances the contact quality of the devices and substantially reduces the surface defects of C-PSCs. In a comparative analysis under identical experimental conditions, MAPbI3 devices incorporating CuBi2O4-PN HTL demonstrated a PCE of 14.79%, achieving a 44.3% increase over the reference device (10.25%). CuBi2O4-treated C-PSCs retained 89.9% of their original PCE after 45 days in storage, and they demonstrated improved stability over a longer time frame. This remarkable improvement in device performance can be attributed to the effective suppression of nonradiative recombination and the enhancement of the carrier transfer process in the device. Additionally, the unique interconnected reticular structure of CuBi2O4-PN provides efficient pathways for hole transfer, significantly contributing to the enhanced efficiency of the device.

Mesoporous Cu2O microspheres for highly efficient C2 chemicals production from CO2 electroreduction

Production of C2 chemicals (such as C2H4, C2H5OH, etc.) from CO2 electroreduction reaction (CO2ER) has been regarded as a promising route to solve the environmental problems and energy crisis. In this work, mesoporous Cu2O microspheres of ca. 700 nm diameter size with low crystallinity were fabricated to enable efficient conversion of CO2 to C2 chemicals by electrocatalytic reduction. It is revealed that compared with bulk Cu2O, the obtained mesoporous Cu2O microspheres have larger surface area, more grain boundaries and defects (unsaturated coordination sites), which facilitate the adsorption and stabilization of the important intermediates, such as *CO, on the route to C2 chemicals formation. As a result, the Faraday efficiency (FE) of C2 products reaches as high as 82.6 % and 78.5 % in an H-cell and a flow cell, respectively. In situ Raman and FT-IR spectra reveal that during CO2ER test there exists abundant *CO on the mesoporous Cu2O surface, thus increasing the opportunity of CC coupling. And the high coverage of *CO on catalyst surface during CO2ER protects and stabilizes the oxidation state of Cu species. This work demonstrates an effective strategy to introduce mesoporous structures and decreased crystallinity for improving the performance of CO2ER to C2 products.

Metal-organic framework-derived trimetallic particles encapsulated by ultrathin nitrogen-doped carbon nanosheets on a network of nitrogen-doped carbon nanotubes as bifunctional catalysts for rechargeable zinc-air batteries

Economical oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) bifunctional catalysts with high activity aimed at replacing precious metal catalysts for rechargeable zinc-air batteries (ZABs) must be developed. In this study, a multiple hierarchical-structural material is developed using a facile dielectric barrier discharge (DBD) plasma surface treatment, solvothermal reaction, and high-temperature carbonization strategy. This strategy allows for the construction of nanosheets using nitrogen-doped carbon (NC) material-encapsulated ternary CoNiFe alloy nanoparticles (NPs) on a network of NC nanotubes (NCNTs), denoted as CoNiFe-NC@p-NCNTs. Precisely, the presence of abundant CoNiFe alloy NPs and the formation of M-N-C active sites created by transition metals (cobalt, nickel, and iron) coupled with NC can provide superior OER/ORR bifunctional properties. Moreover, the prepared NC layers with a multilevel pore structure contribute to a larger specific surface area, exposing numerous active sites and enhancing the uniformity of electron and mass movement. The CoNiFe0.08-NC@p-NCNTs show remarkable dual functionality for electrochemical oxygen reactions (ORR half-wave potential of 0.811 V, limiting current density of 5.73 mA cm-2 measured with a rotating disk electrode at a rotation speed of 1600 rpm, and OER overpotential of 351 mV at 10 mA cm-2), which demonstrates similar ORR performance to 20 wt% Pt/C and better OER performance than the commercial RuO2. A liquid ZAB prepared using the proposed material has excellent bifunctionality with an open-circuit voltage of 1.450 V and long-term cycling stability of 230 h@10 mA cm-2.

Unassisted photoelectrochemical CO2-to-liquid fuel splitting over 12% solar conversion efficiency

The increasing need to control anthropogenic CO2 emissions and conversion to fuels features the necessity for innovative solutions, one of which is photoelectrochemical system. This approach, capable of yielding gaseous production progressively, is facing challenges for liquid fuels generation due to optical, electrical, and catalytic properties. This study employs a standalone photoelectrochemical setup, in which InGaP/GaAs/Ge photoanode is integrated with tin-modified bismuth oxide cathode to convert CO2 into liquid formic acid. In unassisted two-electrode assembly, setup exemplifies its operational durability for 100 h, during which it maintains an average Faradaic efficiency of 88% with 17.3 mmol L-1 h-1 of yield, thereby excelling in average solar-to-fuel conversion efficiency at 12% with 60% of electrical energy efficiency under one sun illumination. This significant performance is further associated with metal-semiconductor interface formation between tin and bismuth oxide, which bridges electronic structures and generates an electric field at their interfaces. This study outperforms conventional solar-driven systems in operational durability and liquid fuel production.

Bismuth-Based Electrocatalysts for Identical Value-Added Formic Acid Through Coupling CO2 Reduction and Methanol Oxidation

It is an effective way to reduce atmospheric CO2 via electrochemical CO2 reduction reaction (CO2RR), while the slow oxygen evolution reaction (OER) occurs at the anode with huge energy consumption. Herein, methanol oxidation reaction (MOR) is used to replace OER, coupling CO2RR to achieve co-production of formate. Through enhancing OCHO* adsorption by oxygen vacancies engineering and synergistic effect by heteroatom doping, Bi/Bi2O3 and Ni─Bi(OH)3 are synthesized for efficient production of formate via simultaneous CO2RR and methanol oxidation reaction (MOR), achieving that the coupling of CO2RR//MOR only required 7.26 kWh gformate -1 power input, much lower than that of CO2RR//OER (13.67 kWh gformate -1). Bi/Bi2O3 exhibits excellent electrocatalytic CO2RR performance, achieving FEformate >80% in a wide potential range from -0.7 to -1.2 V (vs RHE). For MOR, Ni─Bi(OH)3 exhibits efficient MOR catalytic performance with the FEformate >98% in the potential range of 1.35-1.6 V (vs RHE). Not only demonstrates the two-electrode systems exceptional stability, working continuously for over 250 h under a cell voltage of 3.0 V, but the cathode and anode can maintain a FE of over 80%. DFT calculation results reveal that the oxygen vacancies of Bi/Bi2O3 enhance the adsorption of OCHO* intermediate, and Ni─Bi(OH)3 reduce the energy barrier for the rate determining step, leading to high catalytic activity.

Regulation Strategy of Nanostructured Engineering on Indium-Based Materials for Electrocatalytic Conversion of CO2

Electrochemical carbon dioxide reduction (CO2 RR), as an emerging technology, can combine with sustainable energies to convert CO2 into high value-added products, providing an effective pathway to realize carbon neutrality. However, the high activation energy of CO2 , low mass transfer, and competitive hydrogen evolution reaction (HER) leads to the unsatisfied catalytic activity. Recently, Indium (In)-based materials have attracted significant attention in CO2 RR and a series of regulation strategies of nanostructured engineering are exploited to rationally design various advanced In-based electrocatalysts, which forces the necessary of a comprehensive and fundamental summary, but there is still a scarcity. Herein, this review provides a systematic discussion of the nanostructure engineering of In-based materials for the efficient electrocatalytic conversion of CO2 to fuels. These efficient regulation strategies including morphology, size, composition, defects, surface modification, interfacial structure, alloying, and single-atom structure, are summarized for exploring the internal relationship between the CO2 RR performance and the physicochemical properties of In-based catalysts. The correlation of electronic structure and adsorption behavior of reaction intermediates are highlighted to gain in-depth understanding of catalytic reaction kinetics for CO2 RR. Moreover, the challenges and opportunities of In-based materials are proposed, which is expected to inspire the development of other effective catalysts for CO2 RR.

Metal-Organic Framework Derived Bi-O-Sn/C Nanostructure: Tailoring the Adsorption Site of Dominant Intermediate for Highly Efficient CO2 Electroreduction to Formate

Electrochemical CO2 reduction into high-value-added formic acid/formate is an attractive strategy to mitigate global warming and achieve energy sustainability. However, the adsorption energy of most catalysts for the key intermediate *OCHO is usually weak, and how to rationally optimize the adsorption of *OCHO is challenging. Here, an effective Bi-Sn bimetallic electrocatalyst (Bi1 -O-Sn1 @C) where a Bi-O-Sn bridge-type nanostructure is constructed with O as an electron bridge is reported. The electronic structure of Sn is precisely tuned by electron transfer from Bi to Sn through O bridge, resulting in the optimal adsorption energy of intermediate *OCHO on the surface of Sn and the enhanced activity for formate production. Thus, the Bi1 -O-Sn1 @C exhibits an excellent Faradaic efficiency (FE) of 97.7% at -1.1 V (vs RHE) for CO2 reduction to formate (HCOO- ) and a high current density of 310 mA cm-2 at -1.5 V, which is one of the best results catalyzed by Bi- and Sn-based catalysts reported previously. Impressively, the FE exceeds 93% at a wide potential range from -0.9 to -1.4 V. In-situ ATR-FTIR, in-situ Raman, and DFT calculations confirm the unique role of the bridge-type structure of Bi-O-Sn in highly efficient electrocatalytic reduction of CO2 into formate.

Phase Interface Regulating on Amorphous/Crystalline Bismuth Catalyst for Boosted Electrocatalytic CO2 Reduction to Formate

Electroreduction of carbon dioxide into readily collectable and high-value carbon-based fuels is greatly significant to overcome the energy and environmental crises yet challenging in the development of robust and highly efficient electrocatalysts. Herein, a bismuth (Bi) heterophase electrode with enriched amorphous/crystalline interfaces was fabricated via cathodically in situ transformation of Bi-based metal-phenolic complexes (Bi-tannic acid, Bi-TA). Compared with amorphous or crystalline Bi catalyst, the amorphous/crystalline structure Bi leads to significantly enhanced performance for CO2 electroreduction. In a liquid-phase H-type cell, the Faraday efficiency (FE) of formate formation is over 90% in a wide potential range from -0.8 to -1.3 V, demonstrating a high selectivity toward formate. Moreover, in a flow cell, a large current density reaching 600 mA cm-2 can further be rendered for formate production. Theoretical calculations indicate that the amorphous/crystalline Bi heterophase interface exhibits a favorable adsorption of CO2 and lower energy barriers for the rate-determining step compared with the crystalline Bi counterparts, thus accelerating the reaction process. This work paves the way for the rational design of advanced heterointerface catalysts for CO2 reduction.