Constructing extrinsic oxygen vacancy on the surface of photocatalyst as CO2 and electrons reservoirs to improve photocatalytic CO2 reduction activity

Constructing own oxygen vacancies in the photocatalysts is a very promising method to improve their photocatalytic CO2 reduction activity. However, some catalysts have excellent stabilities, making it difficult for them to construct their own oxygen vacancies. To simplify the above difficulty of stable photocatalysts, constructing extrinsic oxygen vacancies on their surface as a novel idea is proposed. Here, a stable TiO2 nanosheet is chosen as a research object, we uniformly deposited BiOCl quantum dots on their surface via a simple adsorption-deposition method. It is found that BiOCl quantum dots are able to simultaneously self-transform into defective BiOCl with many oxygen vacancies when the photocatalyst is performed photocatalytic CO2 reduction. These extrinsic oxygen vacancies can act as "CO2 and photo-generated electrons reservoirs" to improve CO2 capture and accelerate the separation of photogenerated electrons and holes. For the above reasons, the modified TiO2 showed obvious enhancement of photocatalytic CO2 reduction compared to pristine TiO2 and BiOCl. This work may open a new avenue to broaden the use of oxygen vacancies in the process of photocatalytic CO2 reduction.

Fabrication of p-n Heterostructured Photocatalysts with Triazine-Based Covalent Organic Framework and CuInS2 for High-Efficiency CO2 Reduction

The application of covalent organic frameworks (COFs) for the photocatalytic reduction of CO2 is mostly limited by severe charge recombination and low sunlight utilization. Herein, a triazine-based COF with an electron-rich and large π-conjugated system (TCOF) was employed as a building block and integrated with CuInS2 (CIS) to construct a noble-metal-free and high-efficiency photocatalyst for CO2 reduction. The in situ growth of CIS nanosheets on TCOF creates a p-n heterojunction, named CIS@TCOF. Compared with TCOF, the CIS@TCOF heterostructure exhibits a dramatically boosted photocatalytic performance in the reduction of CO2. The produced HCOOH yield over 10 wt % CIS@TCOF can be up to 171.2 μmol g-1 h-1 under visible light irradiation with good reproducibility, which is about 3 times as high as that over TCOF. Further in-depth studies indicate that the introduction of CIS not only enhances the visible light utilization but also restrains the recombination of photogenerated electron-hole pairs efficiently and facilitates the photoinduced charge transfer via the p-n heterojunction system due to the unique structural and compositional features. This research shows the great potential of COFs as efficient photocatalytic carbon fixation materials and provides a versatile route to construct semiconductor-COF heterostructures for photocatalysis.

Metal-Organic Framework Derived Bi-O-Sn/C Nanostructure: Tailoring the Adsorption Site of Dominant Intermediate for Highly Efficient CO2 Electroreduction to Formate

Electrochemical CO2 reduction into high-value-added formic acid/formate is an attractive strategy to mitigate global warming and achieve energy sustainability. However, the adsorption energy of most catalysts for the key intermediate *OCHO is usually weak, and how to rationally optimize the adsorption of *OCHO is challenging. Here, an effective Bi-Sn bimetallic electrocatalyst (Bi1 -O-Sn1 @C) where a Bi-O-Sn bridge-type nanostructure is constructed with O as an electron bridge is reported. The electronic structure of Sn is precisely tuned by electron transfer from Bi to Sn through O bridge, resulting in the optimal adsorption energy of intermediate *OCHO on the surface of Sn and the enhanced activity for formate production. Thus, the Bi1 -O-Sn1 @C exhibits an excellent Faradaic efficiency (FE) of 97.7% at -1.1 V (vs RHE) for CO2 reduction to formate (HCOO- ) and a high current density of 310 mA cm-2 at -1.5 V, which is one of the best results catalyzed by Bi- and Sn-based catalysts reported previously. Impressively, the FE exceeds 93% at a wide potential range from -0.9 to -1.4 V. In-situ ATR-FTIR, in-situ Raman, and DFT calculations confirm the unique role of the bridge-type structure of Bi-O-Sn in highly efficient electrocatalytic reduction of CO2 into formate.

A density functional theory study on the mechanism of toluene from dimethylcyclopentane catalyzed by the [GaH]2+ active site of Ga-ZSM-5

The ONIOM (ωb97xd/6-31G(d,p):pm6) method was used to study the reaction mechanism of dimethylcyclopentane to toluene by the [GaH]2+ active site of Ga-ZSM-5. The results showed that the rate-determining step in the dimethylcyclopentane aromatization process is the ring expansion process. Compared to those of methylcyclopentane to benzene (D. D. Zhang, H. Y. Liu, L. X. Ling, H. R. Zhang, R. G. Zhang, P. Liu and B. J. Wang, Phys. Chem. Chem. Phys., 2021, 23, 10988-11003.), the free energy barriers of dimethylcyclopentane to toluene are significantly decreased, indicating that toluene is easier to produce than benzene, which confirmed the experimental results that a higher proportion of toluene than benzene is produced in the MTA process.

Boosting Low-Temperature CO2 Hydrogenation over Ni-based Catalysts by Tuning Strong Metal-Support Interactions

Rational design of low-cost and efficient transition-metal catalysts for low-temperature CO2 activation is significant and poses great challenges. Herein, a strategy via regulating the local electron density of active sites is developed to boost CO2 methanation that normally requires >350 °C for commercial Ni catalysts. An optimal Ni/ZrO2 catalyst affords an excellent low-temperature performance hitherto, with a CO2 conversion of 84.0 %, CH4 selectivity of 98.6 % even at 230 °C and GHSV of 12,000 mL g-1  h-1 for 106 h, reflecting one of the best CO2 methanation performance to date on Ni-based catalysts. Combined a series of in situ spectroscopic characterization studies reveal that re-constructing monoclinic-ZrO2 supported Ni species with abundant oxygen vacancies can facilitate CO2 activation, owing to the enhanced local electron density of Ni induced by the strong metal-support interactions. These findings might be of great aid for construction of robust catalysts with an enhanced performance for CO2 emission abatement and beyond.

Scalable and Consolidated Microbial Platform for Rare Earth Element Leaching and Recovery from Waste Sources

Chemical methods for the extraction and refinement of technologically critical rare earth elements (REEs) are energy-intensive, hazardous, and environmentally destructive. Current biobased extraction systems rely on extremophilic organisms and generate many of the same detrimental effects as chemical methodologies. The mesophilic methylotrophic bacterium Methylobacterium extorquens AM1 was previously shown to grow using electronic waste by naturally acquiring REEs to power methanol metabolism. Here we show that growth using electronic waste as a sole REE source is scalable up to 10 L with consistent metal yields without the use of harsh acids or high temperatures. The addition of organic acids increases REE leaching in a nonspecific manner. REE-specific bioleaching can be engineered through the overproduction of REE-binding ligands (called lanthanophores) and pyrroloquinoline quinone. REE bioaccumulation increases with the leachate concentration and is highly specific. REEs are stored intracellularly in polyphosphate granules, and genetic engineering to eliminate exopolyphosphatase activity increases metal accumulation, confirming the link between phosphate metabolism and biological REE use. Finally, we report the innate ability of M. extorquens to grow using other complex REE sources, including pulverized smartphones, demonstrating the flexibility and potential for use as a recovery platform for these critical metals.

Highly efficient atomic hydrogen-mediated electrochemical hydrodehalogenation of trichloroacetic acid on 3D hierarchical multi-transition metal selenides

Halogenated organic compounds as highly focused emerging contaminants pose a long-lasting threat to human health and the aquatic environment due to their high toxicities and strong anti-biodegradation characteristics. Electrochemical hydrodehalogenation (ECHD) is a promising technology with a low-carbon footprint to remove halogenated organic compounds while suffering from a lack of efficient and robust earth-abundant electrocatalysts. Herein, by integrating two kinds of transition metal dichalcogenides (i.e., MoSe2 nanosheet and Ni3Se2 nanowire) into a conductive 3D porous network nickel foam, we obtained a hierarchical architecture (MoSe2/Ni3Se2@NF) that promises high surface area, fast charge transfer and efficient mass transfer. The interface-confined epitaxial growth of Ni3Se2 nanowires on nickel foam provides abundant sites for the vertical growth of MoSe2 nanosheets, which endows MoSe2 with maximal accessible active edge sites to participate in the ECHD process. Benefiting from such a hierarchical 3D porous configuration, trichloroacetic acid (5 mg/L) was removed over 95% by MoSe2/Ni3Se2@NF at - 1.2 V vs. SCE after 1 h, which dramatically outperformed that for NF (20%) and Ni3Se2@NF (53.2%). The major contributor to such boosted performance is the adsorbed atomic hydrogen (*H) generated during water splitting via suppressing hydrogen-hydrogen dimerization, as evidenced by radical quenching experiments and electron paramagnetic resonance spectroscopy. This study offers appealing opportunities for tailoring the catalytic performance of noble-metal-free heterogeneous catalysts for various applications that require noble-metal catalysts.

Plasma Exosomal miRNAs as Response Biomarkers of Immunotherapy in Extensive-Stage Small-Cell Lung Cancer

PURPOSE/OBJECTIVE(S)

Immunotherapy combined with chemotherapy has become the first-line standard treatment for patients with extensive-stage small-cell lung cancer (ES-SCLC). The reliable biomarkers stratifying true responders of immunotherapy effectively are unknown, and it is urgent to identify novel biomarkers in clinical. Exosomal miRNAs are considered to play a role in intercellular communication among immune cells and interaction between immune cells and tumor cells. The purpose of this study was to explore the possibility of using plasma-derived exosomal miRNAs as potential biomarkers for identifying responses to immunotherapy in ES-SCLC.

MATERIALS/METHODS

From March 2020 to September 2021, 24 patients with ES-SCLC who received PD-L1 inhibitors were enrolled. Tumor assessments were conducted after every two treatment cycles according to RECIST 1.1. Plasma samples of these patients were collected before administering PD-L1 inhibitors as the baseline, and after every four cycles until the occurrence of disease progression. Plasma exosomes were isolated by ultracentrifugation, then total RNA was extracted. The miRNA profile was analyzed with small RNA next-generation sequencing followed by differential expression analysis.

RESULTS

Of the 24 patients, 15 underwent immunotherapy maintenance after completing four cycles of PD-L1 inhibitor plus chemotherapy. In order to identify biomarkers for a better response to immunotherapy, all five responders (patients achieving PR) and four non-responders (patients achieving PD) at tumor assessment within eight cycles of the maintenance phase were included for differential expression analysis. Surprisingly, hsa-miR-320c, hsa-miR-320d, and hsa-miR-320e showed a trend of increased expression in the non-responders compared with the responders at baseline and were significantly downregulated in the post-treatment plasma exosomes compared with pre-treatment samples of the responders.

CONCLUSION

Exosomal miRNA profiles are discordant between responders and non-responders of anti-PD-L1 treatment. Hsa-miR-320c, hsa-miR-320d, and hsa-miR-320e were identified as potential biomarkers for predicting the efficacy of immunotherapy in patients with ES-SCLC.

Stereotactic Radiotherapy (SRT) in Combination with Aumolertinib to Treat Intracranial Oligometastatic Non-Small Cell Lung Cancer (NSCLC): An Update of a Phase II, Prospective Study

PURPOSE/OBJECTIVE(S)

Stereotactic radiotherapy (SRT) is highly effective and less toxic for limited intracranial metastases. Aumolertinib is a tolerable third-generation epidermal growth factor receptor tyrosine kinase inhibitor that has CNS efficacy in patients with EGFR-mutant NSCLC. We aim to investigate the efficacy and safety of aumolertinib followed by SRT in patients with intracranial oligometastatic NSCLC.

MATERIALS/METHODS

Intracranial oligometastatic Patients with EGFR sensitive mutations (EGFR-TKIs naive) were enrolled and received aumolertinib 110mg daily until intracranial disease progression. Then SRT (32-40 Gy total, 8 Gy/f) was given to intracranial oligo-progression disease if possible. The primary endpoint was intracranial objective response rate (iORR). Secondary endpoints included intracranial progression-free survival (iPFS), intracranial duration of response (iDOR)according to RECIST 1.1, cerebral radiation necrosis rate (CRNR) and overall survival (OS). Safety was evaluated according to Common Terminology Criteria for Adverse Events version 5.0 (CTCAE v5.0). This trial is registered with ClinicalTrials.gov, NCT04519983.

RESULTS

To February 10, 2023, a total of 38 patients were enrolled and 35 patients were assessable followed for 3 months to 18 months. All patients received 110mg aumolertinib daily and received at least one independent imaging evaluation by a radiologist. After oral administration of aumolertinib, the best response of 94% patients in intracranial and extracranial lesions was partial response (PR). Two patients had stable intracranial disease. At data cut-off, one patient developed intracranial primary lesion progression at 12 months after oral administration of aumolertinib but stable in extracranial lesions. SRT treatment was given to this patient. No grade ≥3 adverse events occurred after continued oral administration of aumolertinib. The most common adverse reactions were rash and abnormal liver enzymes, 1 patient had grade 2 CK elevation.

CONCLUSION

This report showed pronounced intracranial objective response benefit in patients with intracranial oligometastatic disease followed by SRT after intracranial oligo-progression and no new safety signals. Aumolertinib has promising efficacy and good tolerability in intracranial oligometastatic EGFR mutated NSCLC. [Keywords] Non-small cell lung cancer; epidermal growth factor receptor tyrosine kinase inhibitor; Aumolertinib; Stereotactic radiotherapy.

Low-Dose Fractionated Radiotherapy Combined with Neoadjuvant Chemotherapy for T3-4 Nasopharyngeal Carcinoma Patients: The Preliminary Results of a Phase II Randomized Controlled Trial

PURPOSE/OBJECTIVE(S)

Over 70% of NPC patients were local advanced NPC (LANPC). The 5-year local recurrence-free survival rate is only 70% in T3-4 patients. Neoadjuvant chemotherapy (NACT) followed with concurrent chemoradiotherapy (CCRT) was recommended for LANPC patients. Low-dose fractionated radiotherapy (LDFRT), which is <100cGy, induces enhanced cell killing by the hyper-radiation sensitivity phenomenon and potentiates effects of chemotherapy. The synergy of LDFRT and NACT has not been used in the clinical practice and few studies focused on it. A single arm study found the ORR of primary site was improved to 90% for head and neck squamous carcinoma patients treated with LDFRT and NACT. Our previous study found the ORR of lymph nodes was higher in LDFRT group for high-risk LANPC patients. However, another study showed there was no significant difference between LDFRT and control group for LANPC patients. So, we aimed to investigate the potential efficacy of this novel neoadjuvant therapy for T3-4 NPC patients.

MATERIALS/METHODS

A total of 60 pathological confirmed T3-4 (UICC/AJCC8th) NPC patients were prospectively enrolled in our study. They were randomly assigned to two groups. For the LDFRT group, the patients received 3 cycles of NACT (docetaxel 75mg/m2 D1, cisplatin 80mg/m2 D1) with LDFRT, and followed with CCRT. LDFRT was delivered as 50cGy per fraction twice a day to primary site on D1,2 for each cycle of NACT. The patients in the control group only received NACT and followed with CCRT. All the patients underwent IGRT. RECIST criteria and CTCAE 5.0 was used to evaluate the ORR and toxicity at post-NACT and the completion of CCRT.

RESULTS

From February 2022 to December 2022, 60 T3-4 NPC patients were included, and 30 patients for each group. For the primary site, the median volume reduction rate and the ORR after NACT was significantly improved in LDFRT group (69.27% vs 40.10%, p<0.001;93.33% vs 73.33%, p = 0.038). For the median volume reduction rate of primary site and lymph node, it was also obviously improved in LDFRT group (86.59% vs 55.43%, p<0.001). Though there was a tendency of ORR improvement in LDFRT group, but no significant difference (96.67% vs 83.33%, p = 0.195). After the completion of CCRT, the median volume reduction rate of primary site had an increased tendency in LDFRT group (96.16% vs 88.3%, p = 0.065), but the ORR had no statistical significance (LDFRT group: CR 45.8%, PR 54.2%; control group: CR 37.5%, PR 62.5%). For the toxicity, the incidence of grade 3-4 adverse events had no difference between two groups (p = 0.786). No grade 5 adverse events occurred.

CONCLUSION

LDFRT combined with NACT could obviously improve the median volume reduction rate and ORR of primary tumor for T3-4 NPC patients, and the toxicity was similar and tolerable. This novel treatment could be a promising strategy to improve treatment response and needed to be confirmed further.

Long-Term Survival Outcome for Metastatic Nasopharyngeal Carcinoma Patients Receiving Radiation to Primary and Metastatic Sites with Palliative Chemotherapy

PURPOSE/OBJECTIVE(S)

A total of 6% - 8% of NPC patients were initial diagnosed as distant metastatic disease. The median overall survival (OS) is only 10-15 months with palliative chemotherapy for these patients. A phase III study showed that palliative chemotherapy combined with radical radiotherapy to primary site could be a newly effective treatment method for metastatic NPC. Another phase 2, RCT found that the patients who had the solid tumors with 1-5 metastases received standard palliative care plus stereotactic body radiation therapy (SABR), and the 5-year OS were improved to 42.3%. Nevertheless, there was few studies focus on the radiation to both primary site and metastatic lesions. Therefore, we aimed to investigate the potential clinical benefits for initial diagnosed metastatic NPC patients with radiation to both primary site and distant metastatic lesions plus palliative chemotherapy.

MATERIALS/METHODS

Metastatic NPC patients treated with radiation to both primary site and distant metastatic lesions plus palliative chemotherapy were retrospectively collected in our hospital from May 2008 to May 2022. For treatment group, all patients underwent IGRT according to ICRU reports 50 and 62. The prescribed dose for primary site: GTVT: ≥66Gy, GTVn: ≥66Gy, CTV1: 60-66Gy, CTV2 54-60Gy, CTVln 50-54Gy. And the prescribed dose for distant metastatic lesions was more than 30Gy. For the control group, the patients treated with palliative chemotherapy were selected by propensity score matching from our hospital. The regimen for palliative chemotherapy was cisplatin-based chemotherapy every three weeks (100mg/m2 D1) for both groups. Kaplan-Meier method was used to analyze the OS. Cox regression model was used for multivariate analysis.

RESULTS

A total of 54 metastatic NPC patients with radiation to both primary site and distant metastatic lesions were retrospectively included in the treatment group, and another 54 patients were selected as the control group. The median follow-up time was 52 months. In the treatment group, the median age was 52 years (37-82), male (68%), female (32%), the main metastatic sites were bone (36 cases, 66%), lung (18 cases, 33%) and liver (10 cases, 18%). There were 23 oligometastasis cases and 31 cases. 3-year and 5-year OS in the treatment group were both dramatically improved than control group (63.2% vs 50.6%, p<0.05; 49.6% vs 38.9%, p<0.05). Multivariate analysis showed that T stage, liver metastatic lesion and oligometastases were the independent prognostic factors for them.

CONCLUSION

Palliative chemotherapy combined with radiation to primary sites and distant metastatic lesions might improve the OS for initial diagnosed distant metastatic NPC patients. More prospective clinical trials were needed to confirm it further.

Visible-light-induced photocatalytic CO2 reduction over zirconium metal organic frameworks modified with different functional groups

The reduction of CO₂ into high value-added chemicals and fuels by a photocatalytic technology can relieve energy shortages and the environmental problems caused by greenhouse effects. In the current work, an amino-functionalized zirconium metal organic framework (Zr-MOF) was covalently modified with different functional groups via the condensation of Zr-MOF with 2-pyridinecarboxaldehyde (PA), salicylaldehyde (SA), benzaldehyde (BA), and trifluoroacetic acid (TA), named Zr-MOF-X (X = PA, SA, BA, and TA), respectively, through the post-synthesis modification. Compared with Zr-MOF and Zr-MOF-TA, the introduction of PA, SA, or BA into the framework of Zr-MOF can not only enhance the visible-light harvesting and CO₂ capture, but also accelerate the photogenerated charge separation and transfer, thereby improving the photocatalytic ability of Zr-MOF for CO₂ reduction. These results indicate that the modification of Zr-MOF with electron-donating groups can promote the photocatalytic CO₂ reduction. Therefore, the current work provides an instructive approach to improve the photocatalytic efficiency of CO₂ reduction through the covalent modification of MOFs.

Peroxymonocarbonate activation via Co nanoparticles confined in metal-organic frameworks for efficient antibiotic degradation in different actual water matrices

Traditional advanced oxidation processes suffer from low availability of ultrashort lifetime radicals and declining stability of catalysts. Co nanoparticles in hollow bimetallic metal-organic frameworks (Co@MOFs) were synthesized via a solvothermal method. Nanoconfinement and peroxymonocarbonate (PMC) degradation system endows Co@MOFs with high catalytic activity and stability even in the actual water matrices. The nanocomposites exhibited 100-200 nm polyhedron structure with irregular nanocavity between the 20 nm shell and multicores. Co nanoparticles were completely encapsulated by the FeIII-MOF-5 shell according to the X-ray diffraction and photoelectron spectra. Both 0.8 nm micropores and 3.6 nm mesopores were proven to be present. The yolk-shell Co@MOFs exhibited higher catalytic performance than that of Co nanoparticles, hollow FeIII-MOF-5 and its core-shell counterpart toward PMC activation during sulfamethoxazole degradation. The catalytic activities of Co@MOFs for the activation of unsymmetrical peroxides (PMC and peroxymonosulfate) were much higher than those for the symmetrical peroxides (H2O2 and persulfate) and the heterogeneous catalysis was dominant in the Co@MOFs activated H2O2 and PMC systems. The MOF stability was the highest and metal leakages were the least in the activated PMC system among the four peroxides because of mild reaction conditions and the alkalescent solution (pH = 8.3-8.4). Furthermore, the high removal efficiencies (>94%) and degradation rates could be maintained in the different actual water matrices due to the confinement effects. The contributions of carbonate and hydroxyl radicals were primary for sulfamethoxazole degradation, and superoxide anion and singlet oxygen also played essential roles according to scavenging experiments and time-series spin-trapping electron spin resonance spectra. Six degradation pathways were proposed according to 26 intermediate identification and the pharmacophores of more than 80% intermediates were destroyed, which would benefit subsequent biological treatment. Successful combination of nanoconfinement and PMC might provide a new effective solution for pollution remediation.

Electrospun Carbon Nanofibers and Their Applications in Several Areas

Carbon nanofibers (CNFs) have a broad spectrum of applications, including sensor manufacturing, electrochemical catalysis, and energy storage. Among different manufacturing methods, electrospinning, due to its simplicity and efficiency, has emerged as one of the most powerful commercial large-scale production techniques. Numerous researchers have been attracted to improving the performance of CNFs and exploring new potential applications. This paper first discusses the working theory of manufacturing electrospun CNFs. Next, the current efforts in upgrading the properties of CNFs, such as pore architecture, anisotropy, electrochemistry, and hydrophilicity, are discussed. The corresponding applications due to the superior performances of CNFs are subsequently elaborated. Finally, the future development of CNFs is discussed.

[Genotype-environment interaction on arterial stiffness: A pedigree-based study]

OBJECTIVE

To utilized the baseline data of the Beijing Fangshan Family Cohort Study, and to estimate whether the association between a healthy lifestyle and arterial stiffness might be modified by genetic effects.

METHODS

Probands and their relatives from 9 rural areas in Fangshan district, Beijing were included in this study. We developed a healthy lifestyle score based on five lifestyle behaviors: smoking, alcohol consumption, body mass index (BMI), dietary pattern, and physical activity. The measurements of arterial stiffness were brachial-ankle pulse wave velocity (baPWV) and ankle-brachial index (ABI). A variance component model was used to determine the heritability of arterial stiffness. Genotype-environment interaction effects were performed by the maximum likelihood methods. Subsequently, 45 candidate single nucleotide polymorphisms (SNPs) located in the glycolipid metabolism pathway were selected, and generalized estimated equations were used to assess the gene-environment interaction effects between particular genetic loci and healthy lifestyles.

RESULTS

A total of 6 302 study subjects across 3 225 pedigrees were enrolled in this study, with a mean age of 56.9 years and 45.1% male. Heritability of baPWV and ABI was 0.360 (95%CI: 0.302-0.418) and 0.243 (95%CI: 0.175-0.311), respectively. Significant genotype-healthy diet interaction on baPWV and genotype-BMI interaction on ABI were observed. Following the findings of genotype-environment interaction analysis, we further identified two SNPs located in ADAMTS9-AS2 and CDH13 might modify the association between healthy dietary pattern and arterial stiffness, indicating that adherence to a healthy dietary pattern might attenuate the genetic risk on arterial stiffness. Three SNPs in CDKAL1, ATP8B2 and SLC30A8 were shown to interact with BMI, implying that maintaining BMI within a healthy range might decrease the genetic risk of arterial stiffness.

CONCLUSION

The current study discovered that genotype-healthy dietary pattern and genotype-BMI interactions might affect the risk of arterial stiffness. Furthermore, we identified five genetic loci that might modify the relationship between healthy dietary pattern and BMI with arterial stiffness. Our findings suggested that a healthy lifestyle may reduce the genetic risk of arterial stiffness. This study has laid the groundwork for future research exploring mechanisms of arterial stiffness.

Study on enhancement of hemoglobin antitoxic ability modified with chromium and ruthenium

Hemoglobin is essential for carrying oxygen (O₂) in the blood. However, its ability to bind excessively to carbon monoxide (CO) makes it susceptible to CO poisoning. To reduce the risk of CO poisoning, Cr-based heme and Ru-based heme were selected from among many transition metal-based hemes based on their characteristics of adsorption conformation, binding intensity, spin multiplicity, and electronic properties. The results showed that hemoglobin modified by Cr-based heme and Ru-based heme had strong anti-CO poisoning abilities. The Cr-based heme and Ru-based heme exhibited much stronger affinity for O₂ (-190.67 kJ/mol and -143.18 kJ/mol, respectively) than Fe-based heme (-44.60 kJ/mol). Moreover, Cr-based heme and Ru-based heme exhibited much weaker affinity for CO (-121.50 kJ/mol and -120.88 kJ/mol, respectively) than their affinity for O₂, suggesting that they were less likely to cause CO poisoning. The electronic structure analysis also supported this conclusion. Additionally, molecular dynamics analysis showed that hemoglobin modified by Cr-based heme and Ru-based heme was stable. Our findings offer a novel and effective strategy for enhancing the reconstructed hemoglobin's ability to bind O₂ and reduce its potential for CO poisoning.

Catalytic CO2 Capture via Ultrasonically Activating Dually Functionalized Carbon Nanotubes

High energy consumption and high cost have been the obstacles for large-scale deployment of all state-of-the-art CO₂ capture technologies. Finding a transformational way to improve mass transfer and reaction kinetics of the CO₂ capture process is timely for reducing carbon footprints. In this work, commercial single-walled carbon nanotubes (CNTs) were activated with nitric acid and urea under ultrasonication and hydrothermal methods, respectively, to prepare N-doped CNTs with the functional group of -COOH, which possesses both basic and acid functionalities. The chemically modified CNTs with a concentration of 300 ppm universally catalyze both CO₂ sorption and desorption of the CO₂ capture process. The increases in the desorption rate achieved with the chemically modified CNTs can reach as high as 503% compared to that of the sorbent without the catalyst. A chemical mechanism underlying the catalytic CO₂ capture is proposed based on the experimental results and further confirmed by density functional theory computations.

Mesoporous MgO enriched in Lewis base sites as effective catalysts for efficient CO2 capture

Capturing CO₂ has become increasingly important. However, wide industrial applications of conventional CO₂ capture technologies are limited by their slow CO₂ sorption and desorption kinetics. Accordingly, this research is designed to overcome the challenge by synthesizing mesoporous MgO nanoparticles (MgO-NPs) with a new method that uses PEG 1500 as a soft template. MgO surface structure is nonstoichiometric due to its distinctive shape; the abundant Lewis base sites provided by oxygen vacancies promote CO₂ capture. Adding 2 wt % MgO-NPs to 20 wt % monoethanolamine (MEA) can increase the breakthrough time (the time with 90% CO₂ capturing efficiency) by ∼3000% and can increase the CO₂ absorption capacity within the breakthrough time by ∼3660%. The data suggest that MgO-NPs can accelerate the rate and increase CO₂ desorption capacity by up to ∼8740% and ∼2290% at 90 °C, respectively. Also, the excellent stability of the system within 50 cycles is verified. These findings demonstrate a new strategy to innovate MEA absorbents currently widely used in commercial post-combustion CO₂ capture plants.

[The role of the high-level public health school in the development of the Center for Disease Control and Prevention]

The Ministry of Education and other four departments jointly issued the Notice on the Construction of high-level schools of public Health, proposing that "it will take ten years to build a number of high-level schools of public health, and form a high-quality education development system to adapt to the construction of modern public health system". At present, the construction of high-level public health schools in various universities in China is in full swing. The high-level School of Public Health and the CDC have played an important role in constructing the national public health system and the human health community. The high-level public health schools are of strategic significance and important value to the development of the CDC. The review presents reflections and insights on the role of high-level public health schools in the development of the CDC and the challenges they might face.

Intelligent Chip-Controlled Smart Oxygen Electrodes for Constructing Rechargeable Zinc-Air Batteries with Excellent Energy Efficiency and Durability

High-performance rechargeable oxygen electrodes are key devices for realizing high-specific-energy batteries, including zinc-air and lithium-air batteries. However, these batteries have severe problems of premature decay in energy efficiency by serious corrosion, wide charge-discharge gap, and catalyst peeling off. Herein, we propose a "smart dual-oxygen electrode", which is composed of an intelligent switch control module + heterostructured Fe₁Ni₃-LDH/PNCNF OER catalysis electrode layer + ion conductive | electronic insulating membrane + Pt/C ORR catalysis electrode layer, where OER and ORR layers are automatically switched by the intelligent switch control module as required. This smart dual-oxygen electrode offers an ultralow energy efficiency decay rate of 0.0067% after 300 cycles during cycling, much lower than that of the commercial Pt/C electrode (1.82%). The assembled rechargeable zinc-air battery (RZAB) displays a super narrow voltage gap and achieves a high energy efficiency of 71.7%, far higher than that of the existing RZABs (about 50%). Therefore, this strategy provides a complete solution for designing various high-performance metal-air secondary batteries.

Global survival trends for brain tumors, by histology: analysis of individual records for 556,237 adults diagnosed in 59 countries during 2000-2014 (CONCORD-3)

BACKGROUND

Survival is a key metric of the effectiveness of a health system in managing cancer. We set out to provide a comprehensive examination of worldwide variation and trends in survival from brain tumors in adults, by histology.

METHODS

We analyzed individual data for adults (15-99 years) diagnosed with a brain tumor (ICD-O-3 topography code C71) during 2000-2014, regardless of tumor behavior. Data underwent a 3-phase quality control as part of CONCORD-3. We estimated net survival for 11 histology groups, using the unbiased nonparametric Pohar Perme estimator.

RESULTS

The study included 556,237 adults. In 2010-2014, the global range in age-standardized 5-year net survival for the most common sub-types was broad: in the range 20%-38% for diffuse and anaplastic astrocytoma, from 4% to 17% for glioblastoma, and between 32% and 69% for oligodendroglioma. For patients with glioblastoma, the largest gains in survival occurred between 2000-2004 and 2005-2009. These improvements were more noticeable among adults diagnosed aged 40-70 years than among younger adults.

CONCLUSIONS

To the best of our knowledge, this study provides the largest account to date of global trends in population-based survival for brain tumors by histology in adults. We have highlighted remarkable gains in 5-year survival from glioblastoma since 2005, providing large-scale empirical evidence on the uptake of chemoradiation at population level. Worldwide, survival improvements have been extensive, but some countries still lag behind. Our findings may help clinicians involved in national and international tumor pathway boards to promote initiatives aimed at more extensive implementation of clinical guidelines.

[Progress in research of risk prediction of non-syndromic oral clefts using genetic information]

Non-syndromic oral cleft (NSOC), a common birth defect, remains to be a critical public health problem in China. In the context of adjustment of childbearing policy for two times in China and the increase of pregnancy at older childbearing age, NSOC risk prediction will provide evidence for high-risk population identification and prenatal counseling. Genome-wide association study and second generation sequencing have identified multiple loci associated with NSOC, facilitating the development of genetic risk prediction of NSOC. Despite the marked progress, risk prediction models of NSOC still faces multiple challenges. This paper summarizes the recent progress in research of NSOC risk prediction models based on the results of extensive literature retrieval to provide some insights for the model development regarding research design, variable selection, model-build strategy and evaluation methods.

Emerging catalysts for the ambient synthesis of ethylene glycol from CO2 and its derivatives

Ethylene glycol (EG), a useful chemical raw material, has been widely applied in many aspects of modern society. The conventional preparation of ethylene glycol mainly uses the petroleum route at high temperatures and pressure. More and more approaches have been developed to synthesize EG from CO₂ and its derivatives under mild conditions. In this review, the ambient synthesis of EG from thermocatalysis, photocatalysis, and electrocatalysis is highlighted. The coal-to-ethylene glycol technology, one of the typical thermal catalysis routes for EG preparation, is relatively mature. However, it still faces some problems to be solved in industrialization. The recent progress in the development of coal-to-ethylene glycol technology is introduced. The main focus is on how to realize the preparation of EG under mild conditions. The strategies include doping promoters, modification of supports, design of catalysts with special structures, etc. Furthermore, the emerging technological progress of photocatalytic and electrocatalytic ethylene glycol synthesis under ambient conditions is introduced. Compared with the thermal catalytic reaction, the reaction conditions are milder. However, there are still many problems in large-scale production. Finally, we propose future development issues and related prospects for the ambient synthesis of EG using different catalytic routes.

Ethane Dehydrogenation over the Core-Shell Pt-Based Alloy Catalysts: Driven by Engineering the Shell Composition and Thickness

Pt-based catalysts as the commercial catalysts in ethane dehydrogenation (EDH) face one of the main challenges of realizing the balance between coke formation and catalytic activity. In this work, a strategy to drive the catalytic performance of EDH on Pt-Sn alloy catalysts is proposed by rationally engineering the shell surface structure and thickness of core-shell Pt@Pt₃Sn and Pt₃Sn@Pt catalysts from a theoretical perspective. Eight types of Pt@Pt₃Sn and Pt₃Sn@Pt catalysts with different Pt and Pt₃Sn shell thicknesses are considered and compared with the industrially used Pt and Pt₃Sn catalysts. Density functional theory (DFT) calculations completely describe the reaction network of EDH, including the side reactions of deep dehydrogenation and C-C bond cracking. Kinetic Monte Carlo (kMC) simulations reveal the influences of the catalyst surface structure, experimentally related temperatures, and reactant partial pressures. The results show that CHCH* is the main precursor for coke formation, and Pt@Pt₃Sn catalysts generally have higher C₂H₄(g) activity and lower selectivity compared to those of Pt₃Sn@Pt catalysts, which is attributed to the unique surface geometrical and electronic properties. 1Pt₃Sn@4Pt and 1Pt@4Pt₃Sn are screened out as catalysts exhibiting excellent performance; especially, the 1Pt₃Sn@4Pt catalyst has much higher C₂H₄(g) activity and 100% C₂H₄(g) selectivity compared to those of 1Pt@4Pt₃Sn and the widely used Pt and Pt₃Sn catalysts. The two descriptors C₂H₅* adsorption energy and reaction energy of its dehydrogenation to C₂H₄* are proposed to qualitatively evaluate the C₂H₄(g) selectivity and activity, respectively. This work facilitates a valuable exploration for optimizing the catalytic performance of core-shell Pt-based catalysts in EDH and reveals the great importance of the fine control of the catalyst shell surface structure and thickness.

Catalysts for gaseous organic sulfur removal

Organic sulfur gases (COS, CS₂ and CH₃SH) are widely present in reducing industrial off-gases, and these substances pose difficulties for the recovery of carbon monoxide and other gases. The reaction pathways and reaction mechanisms of organic sulfur on different catalyst surfaces have yet to be fully summarized. The literature shows that many factors, such as catalyst synthesis method, loaded metal composition, number of surface hydroxyl groups, number of acid-base sites and methods of surface modification, have important effects on the catalytic performance of metal catalysts. Therefore, this paper presents a comprehensive review of the research on the application of catalysts such as zeolites, metal oxides, carbon-based materials, and hydrotalcite-like derivatives in the field of organic sulfur removal. Future research prospects are summarized, more in situ characterization experiments and theoretical calculations are needed for the catalytic decomposition of methanethiol to analyze the coke generation pathways at the microscopic level, while the simultaneous removal of multiple organic sulfur gases needs to be focused on. Based on previous catalyst research, we propose possible innovations in catalyst design, desulfurization technology and organic sulfur resource utilization technology.

[EMmim][NTf2 ]-a Novel Ionic Liquid (IL) in Catalytic CO2 Capture and ILs' Applications

Ionic liquids (ILs) have been used for carbon dioxide (CO₂ ) capture, however, which have never been used as catalysts to accelerate CO₂ capture. The record is broken by a uniquely designed IL, [EMmim][NTf₂ ]. The IL can universally catalyze both CO₂ sorption and desorption of all the chemisorption-based technologies. As demonstrated in monoethanolamine (MEA) based CO₂ capture, even with the addition of only 2000 ppm IL catalyst, the rate of CO₂ desorption-the key to reducing the overall CO₂ capture energy consumption or breaking the bottleneck of the state-of-the-art technologies and Paris Agreement implementation-can be increased by 791% at 85 °C, which makes use of low-temperature waste heat and avoids secondary pollution during CO₂ capture feasible. Furthermore, the catalytic CO₂ capture mechanism is experimentally and theoretically revealed.

Enhancing Catalytic Performance through Subsurface Chemistry: The Case of C2H2 Semihydrogenation over Pd Catalysts

Subsurface chemistry in heterogeneous catalysis plays an important role in tuning catalytic performance. Aiming to unravel the role of subsurface heteroatoms, C₂H₂ semihydrogenation on a series of Pd catalysts doped with subsurface heteroatom H, B, C, N, P, or S was fully investigated by density functional theory (DFT) calculations together with microkinetic modeling. The obtained results showed that catalytic performance toward C₂H₂ semihydrogenation was affected significantly by the type and coverage of subsurface heteroatoms. The Pd-B_0.5 and Pd-C_0.5 catalysts with 1/2 monolayer (ML) heteroatom coverage, as well as Pd-N, Pd-P, and Pd-S catalysts with 1/16 ML heteroatom coverage, were screened to not only obviously improve C₂H₄ selectivity and activity but also effectively suppress green oil. The essential reason for subsurface heteroatoms in tuning catalytic performance is attributed to the distinctive surface Pd electronic and geometric structures caused by subsurface heteroatoms. In the Pd-B_0.5 and Pd-C_0.5 catalysts, the Pd surface electronic and geometric effects play the dominant role, while the geometric effect plays a key role in the Pd-N, Pd-P, and Pd-S catalysts. The findings provide theoretically valuable information for designing high-performance metal catalysts in alkyne semihydrogenation through subsurface chemistry.

Plasma-Assisted Reforming of Methane

Methane (CH₄ ) is inexpensive, high in heating value, relatively low in carbon footprint compared to coal, and thus a promising energy resource. However, the locations of natural gas production sites are typically far from industrial areas. Therefore, transportation is needed, which could considerably increase the sale price of natural gas. Thus, the development of distributed, clean, affordable processes for the efficient conversion of CH₄ has increasingly attracted people's attention. Among them are plasma technology with the advantages of mild operating conditions, low space need, and quick generation of energetic and chemically active species, which allows the reaction to occur far from the thermodynamic equilibrium and at a reasonable cost. Significant progress in plasma-assisted reforming of methane (PARM) is achieved and reviewed in this paper from the perspectives of reactor development, thermal and nonthermal PARM routes, and catalysis. The factors affecting the conversion of reactants and the selectivity of products are studied. The findings from the past works and the insight into the existing challenges in this work should benefit the further development of reactors, high-performance catalysts, and PARM routes.

Chemical looping based ammonia production-A promising pathway for production of the noncarbon fuel

Ammonia, primarily made with Haber-Bosch process developed in 1909 and winning two Nobel prizes, is a promising noncarbon fuel for preventing global warming of 1.5 °C above pre-industrial levels. However, the undesired characteristics of the process, including high carbon footprint, necessitate alternative ammonia synthesis methods, and among them is chemical looping ammonia production (CLAP) that uses nitrogen carrier materials and operates at atmospheric pressure with high product selectivity and energy efficiency. To date, neither a systematic review nor a perspective in nitrogen carriers and CLAP has been reported in the critical area. Thus, this work not only assesses the previous results of CLAP but also provides perspectives towards the future of CLAP. It classifies, characterizes, and holistically analyzes the fundamentally different CLAP pathways and discusses the ways of further improving the CLAP performance with the assistance of plasma technology and artificial intelligence (AI).

Cu Catalysts Doped with a Heteroatom into the Subsurface: Unraveling the Role of Subsurface Chemistry in Tuning the Catalytic Performance of C2H2 Selective Hydrogenation

Heteroatoms doped into the subsurface of transition metals play a vital role in heterogeneous catalysis via either expressing surface structures or even directly participating in the reaction. Herein, DFT calculations and microkinetic modeling are implemented to examine C₂H₂ selective hydrogenation over heteroatom (H, B, C, N, or P)-doped Cu(111) and Cu(211) subsurfaces, which are compared with pure Cu(111) and Cu(211) to unravel the role of subsurface chemistry in tuning the surface structure and further regulating catalytic performance. Our results indicate that the catalytic performance toward C₂H₂ selective hydrogenation is closely related to the type of doped subsurface heteroatom and the Cu surface coordination environment, which can be attributed to the simultaneous change of Cu surface geometric and electronic structures. Catalytic performance improvement over the heteroatom-doped Cu(111) is generally better than that over the doped Cu(211); especially, B- or N-doped Cu(111) has excellent C₂H₄ activity and selectivity and greatly inhibits green oil. For the heteroatom-doped Cu(211), better performance is only obtained on P-Cu(211), which is still lower than the B- and N-doped Cu(111). The subsurface heteroatom doping should focus on high-coordination Cu(111) instead of low-coordination Cu(211). AIMD simulations verified the thermal stability of B-Cu(111) and N-Cu(111); both were screened out to be the most suitable catalysts toward C₂H₂ hydrogenation. This work clearly unravels the role of subsurface chemistry in heterogeneous catalysis and contributes to the rational design of high-performance metal catalysts by tuning surface structures with the heteroatom into the subsurface.

Quantitative structure-activity relationship (QSAR) guides the development of dye removal by coagulation

QSAR modeling could be a promising tool for guiding the development of novel and cost-effective environmental technologies. As an example, it could be widely used to analyze the degradation rules of organic pollutants in various decomposition methods. However, a lack of systematic research on a particular removal method is significant in revealing the decomposition rule of pollutants more accurately and guiding industrial applications. In this study, six coagulation systems (MnO₂/Fe(OH)₃/AlCl₃/FeCl₃/CaCl₂/MgCl₂) were used as examples to remove 38 dyes under three pH conditions, and the characteristics and differences of these systems were explored by QSAR modeling. The results showed that the removal effect by MnO₂ under acidic and neutral conditions and Fe(OH)₃ under acidic conditions were quantitatively described mainly by bond order (BO) and Fukui index (f (+) and f (0)), which reflected that oxidative degradation dominated. In contrast, most of the critical parameters of other systems were molecular descriptors represented by ∑q(O) (the total charge of all the oxygen atoms in the molecule) and SAA (surface area of a molecule), which reflected that electrostatic adsorption and hydrogen-bond adsorption processes dominated.

[Family-based association tests for rare variants]

Next-generation sequencing has revolutionized family-based association tests for rare variants. As the lower power of genome wide association study for detecting casual rare variants, methods aggregating effects of multiple variants have been proposed, such as burden tests and variance component tests. This paper summarizes the methods of rare variants association test that can be applied for family data, introduces their principles, characteristics and applicable conditions and discusses the shortcomings and the improvement of the present methods.

QSAR model and mechanism research on color removal efficiency of dying wastewater by FeCl3 coagulation

Coagulation is the most widely used method in the treatment of printing and dying wastewater. To better understand the relationship between the coagulation effect and dye molecular structures, quantitative structure activity relationship (QSAR) analyses were performed to elucidate the factors affecting the coagulation in ferric chloride (FeCl₃) coagulation process. First, the coagulation experiments on 38 dye molecules were conducted to determine their color removal rates (R_exp) by FeCl₃ under different pH conditions (i.e., pH = 4 and 10). The results showed that the average R_exp of dyes were 41.36% ± 2.40% at pH value of 4 and 55.70% ± 2.83% at pH value of 10. Subsequently, a multiple linear regression (MLR) method was used to construct QSAR models based on R_exp and 42 molecular parameters calculated by Gaussian 09, Materials Studio 7.0 and Multiwfn. The developed QSAR models exhibited excellent stability, reliability, and robustness with values of R² = 0.7950, 0.8170, Q²_INT = 0.6401, 0.7382, Q²_EXT = 0.5168, 0.5441, at pH values of 4 and 10, respectively. Through analysis of quantum parameter values, electrostatic adsorption and hydrogen bonding adsorption were primarily responsible for the coagulation process. Therefore, this study could be useful in providing critical information for evaluating the removal efficiency and a feasible way to predict the removal rate of dyes by FeCl₃ when no coagulation experiments were conducted.

[IRE1α deficiency impairs autophagy in chondrocytes by upregulating calcium homeostasis endoplasmic reticulum protein]

OBJECTIVE

To explore the mechanism by which inositol-requiring enzyme-1α (IRE1α) regulates autophagy function of chondrocytes through calcium homeostasis endoplasmic reticulum protein (CHERP).

METHODS

Cultured human chondrocytes (C28/I2 cells) were treated with tunicamycin, 4μ8c, rapamycin, or both 4μ8c and rapamycin, and the expressions of endoplasmic reticulum (ER) stress- and autophagy-related proteins were detected with Western blotting. Primary chondrocytes from ERN1 knockout (ERN1 CKO) mice and wild-type mice were examined for ATG5 and ATG7 mRNA expressions, IRE1α and p-IRE1α protein expressions, and intracellular calcium ion content using qPCR, Western blotting and flow cytometry. The effect of bafilomycin A1 treatment on LC3 Ⅱ/LC3 Ⅰ ratio in the isolated chondrocytes was assessed with Western blotting. Changes in autophagic flux of the chondrocytes in response to rapamycin treatment were detected using autophagy dual fluorescent virus. The changes in autophagy level in C28/I2 cells overexpressing CHERP and IRE1α were detected using immunofluorescence assay.

RESULTS

Tunicamycin treatment significantly up-regulated ER stress-related proteins and LC3 Ⅱ/LC3 Ⅰ ratio and down-regulated the expression of p62 in C28/I2 cells (P < 0.05). Rapamycin obviously up-regulated LC3 Ⅱ/LC3 Ⅰ ratio (P < 0.001) in C28/I2 cells, but this effect was significantly attenuated by co-treatment with 4μ8c (P < 0.05). Compared with the cells from the wild-type mice, the primary chondrocytes from ERN1 knockout mice showed significantly down-regulated mRNA levels of ERN1 (P < 0.01), ATG5 (P < 0.001) and ATG7 (P < 0.001), lowered or even lost expressions of IRE1α and p-IRE1α proteins (PP < 0.01), and increased expression of CHERP (P < 0.05) and intracellular calcium ion content (P < 0.001). Bafilomycin A1 treatment obviously increased LC3 Ⅱ/ LC3 Ⅰ ratio in the chondrocytes from both wild-type and ERN1 knockout mice (P < 0.01 or 0.05), but the increment was more obvious in the wild-type chondrocytes (P < 0.05). Treatment with autophagy dual-fluorescence virus resulted in a significantly greater fluorescence intensity of LC3-GFP in rapamycin-treated ERN1 CKO chondrocytes than in wild-type chondrocytes (P < 0.05). In C28/I2 cells, overexpression of CHERP obviously decreased the fluorescence intensity of LC3, and overexpression of IRE1α enhanced the fluorescence intensity and partially rescued the fluorescence reduction of LC3 caused by CHERP.

CONCLUSION

IRE1α deficiency impairs autophagy in chondrocytes by upregulating CHERP and increasing intracellular calcium ion content.

Core-Shell Covalently Linked Graphitic Carbon Nitride-Melamine-Resorcinol-Formaldehyde Microsphere Polymers for Efficient Photocatalytic CO2 Reduction to Methanol

Photocatalytic reduction of CO₂ with light and H₂O to form CH₃OH is a promising route to mitigate carbon emissions and climate changes. Although semiconducting metal oxides are potential photocatalysts for this reaction, low photon efficiency and leaching of environmentally unfriendly toxic metals limit their applicability. Here, we report metal-free, core-shell photocatalysts consisting of graphitic carbon nitride (g-C₃N₄, CN) covalently linked to melamine-resorcinol-formaldehyde (MRF) microsphere polymers for this reaction. Covalent linkage enabled efficient separation of photo-generated carriers and photocatalysis. Using 100 mg of a photocatalyst containing 15 wt % CN, a CH₃OH yield of 0.99 μmol·h^-1 was achieved at a reaction temperature of 80 °C and 0.5 MPa with external quantum efficiencies ranging from 5.5% at 380 nm to 1.7% at 550 nm. The yield was about 20 and 10 times higher than that of its components CN and MRF, respectively. Characterization with X-ray photoelectron spectroscopy, transmission electron microscopy, and bulk and surface elemental analyses supported the formation of a core-shell structure and the charge transfer in the C-N bond at the CN-MRF interface between the methoxy group in the 2,4-dihydroxylmethyl-1,3-diphenol part of MRF and the terminal amino groups in CN. This enhanced ligand-to-ligand charge transfer resulted in 67% of the photo-excited internal charge transferred from CN to the hydroxymethylamino group in MRF, whose amino group was the catalytic site for the CO₂ photocatalytic reduction to CH₃OH. This study provides a series of new metal-free photocatalyst designs and insights into the molecular-level structure-mediated photocatalytic response.

Syngas Conversion to C2 Species over WC and M/WC (M = Cu or Rh) Catalysts: Identifying the Function of Surface Termination and Supported Metal Type

Improving the selectivity and activity of C₂ species from syngas is still a challenge. In this work, catalysts with monolayer Cu or Rh supported over WC with different surface terminations (M/WC (M = Cu or Rh)) are rationally designed to facilitate C₂ species generation. The complete reaction network is analyzed by DFT calculations. Microkinetics modeling is utilized to consider the experimental reaction temperature, pressure, and the coverage of the species. The thermal stabilities of the M/WC (M = Cu or Rh) catalysts are confirmed by AIMD simulations. The results show that the surface termination and supported metal types in the M/WC (M = Cu or Rh) catalysts can alter the existence form of abundant CH_x (x = 1-3) monomer, as well as the activity and selectivity of CH_x monomer and C₂ species. Among these, only the Cu/WC-C catalyst is screened out to achieve outstanding activity and selectivity for C₂H₂ generation, attributing to that the synergistic effect of the subsurface C atoms and the surface monolayer Cu atoms presents the noble-metal-like character to promote the generation of CH_x and C₂ species. This work demonstrates a new possibility for rational construction of other catalysts with the non-noble metal supported by the metal carbide, adjusting the surface termination of metal carbide and the supported metal types can present the noble-metal-like character to tune catalytic performance of C₂ species from syngas.

[Summary of tools for assessment of public health emergency response capability]

With the progress of globalization, the public health emergencies represented by major infectious diseases have become a major challenge for the public health management in China. The article briefly describes the emergency response capability assessment tools in China, and introduces two emergency response assessment tools with complete content structure and wide application in the world. Then the advantages and disadvantages of the tools are compared and discussed in order to provide reference for improvement of the assessment tools for public health emergency response capability in China.