Functional Kaolinite

Immobilized Copper Complexes on Coal-Bearing Kaolin for Catalyzing Allylic Ester Synthesis via C(sp3)-H Bond Activation

Copper complexes have attracted significant interest for catalyzing oxidative dehydrogenative carboxylation of alkanes to form esters. Here, we report a heterogeneous catalyst, in which copper complexes are immobilized on coal-bearing kaolin for the synthesis of allylic esters via C(sp3)-H bond activation through cross-dehydrogenation coupling reactions between cyclic alkanes and aromatic carboxylic acids. Systematic optimization of reaction conditions-including catalyst loading, copper content, oxidant, temperature, and reaction time-resulted in a high yield of 71% of allylic ester, comparable to homogeneous transition metal catalysts. The catalyst is easily recoverable via centrifugation and retains its activity over five consecutive reuse cycles. This system demonstrates broad substrate compatibility with various aromatic carboxylic acids and cyclic alkanes. Beyond offering an efficient and reusable catalytic route for allylic ester synthesis, this work highlights the potential of coal-bearing kaolin as a sustainable support material for transition metal catalysis and provides an environmentally benign method for activating inert C(sp3)-H bonds.

Reusing Kaolin Residue from the Mining Industry to Produce PCL-Based Composites: Accelerating the Crystallization Process and Improving Mechanical Properties

The impact of adding 1%, 3%, and 5% by mass of kaolin residue (KR) was investigated regarding the mechanical, thermomechanical, and morphological properties, as well as the non-isothermal crystallization and melting kinetics of poly(ε-caprolactone) (PCL). The processing to obtain the PCL/KR composites was carried out through extrusion in a twin-screw extruder, followed by injection molding. This study investigated the events of first melting, fusion crystallization, and second melting using differential scanning calorimetry (DSC), with heating rates ranging from 5 to 25 °C/min. Additionally, models for the expanded Prout-Tompkins equation (BNA), the nth-order reaction with m-power autocatalysis by product (Cnm), and the Sestak and Berggren equation (SB) were tested. The PCL/KR composites exhibited an increase in the elastic modulus and the heat deflection temperature (HDT) compared to the pure PCL. Furthermore, high ductility was observed, as evidenced by the impact strength and elongation at break. The good distribution of KR in the PCL matrix was confirmed by scanning electron microscopy (SEM), which contributed to a more efficient crystallization process. The increase in KR content in the PCL matrix shifted the crystallization sigmoids to higher temperatures, acting as a nucleating agent, which reduced the energy barriers and increased the crystallization temperature by up to 5 °C. The melting events did not show significant changes with the addition of the KR. The results are important for the plastics processing industry, mainly due to the opportunity to add value to the waste and use it as an additive.

Chemical Transformations of Infiltrated Wildfire Smoke on Indoor-Relevant Surfaces

Indoor environments are affected during wildfire events due to the infiltration of smoke. In this study, the fate of wildfire smoke, including gases and particles, on indoor surfaces was investigated through laboratory and field experiments. Fresh smoke was generated from the burning of ponderosa pine woodchips, which produced well-established wildfire and biomass burning tracers, such as levoglucosan, 3-methyl-1,2,3-butanetricarboxylic acid (MBTCA), and 5-hydroxymethylfurfural. The interactions of smoke particles and gases were observed on different indoor-relevant building material surfaces, including glass (windows), rutile (paint and self-cleaning surfaces), and kaolinite (cement proxy and clay). However, the relative abundance of surface-bound species varied depending on the nature of these surfaces, suggesting that preferential adsorption of volatile species and particle deposition onto relevant surfaces play a key role in indoor chemistry and indoor air quality following smoke intrusion. Kaolinite surfaces, in particular, exhibited the formation of surface-initiated products during fresh smoke exposure. Furthermore, the formation of larger particles on a rutile surface was observed following ozone-aged smoke exposure, potentially resulting from the interaction of secondary organic aerosol formed during ozonolysis. Overall, this study demonstrates that different indoor-relevant material surfaces interact uniquely with smoke compounds, leading to distinct chemical transformations.

Regulatory Mechanisms of Cytotoxicity and Hemocompatibility Induced by Phase Transformation of Kaolinite Nanocarrier

Revealing the regulatory mechanism underlying the cytotoxicity and hemocompatibility of nanocarriers is crucial for their biofunctionalized design and practical application in nanotherapeutics. However, the microstructural and physicochemical properties of nanocarriers inevitably change during the modification process, and the impact of these changes on biosafety remains unclear. Herein, we investigate the effects of phase transformation of kaolinite (Kaol) nanoclay on its biosafety. Experimental results indicate that the adjoint dehydration, dehydroxylation, and disaggregation during phase transformation of Kaol could alter the mode of interaction at the cell interface and mitigate damage to cell membranes. Furthermore, the heat-treated Kaol exhibits reduced hemolysis while maintaining red blood cell adhesion and pro-coagulant functions, without affecting the structure of plasma proteins. Collectively, this study could provide a novel insight into the correlation between Kaol microstructure and biosafety.

Kaolinite induces rapid authigenic mineralisation in unburied shrimps

Fossils preserving soft tissues and lightly biomineralized structures are essential for the reconstruction of past ecosystems and their evolution. Understanding fossilization processes, including decay and mineralisation, is crucial for accurately interpreting ancient morphologies. Here we investigate the decay of marine and freshwater shrimps deposited on the surface of three different clay beds. In experimental set ups containing kaolinite, cryogenic scanning electron microscopy shows a black film comprised of newly formed anhedral and cryptocrystalline aluminosilicates on marine shrimp cuticles, which stabilise the overall morphology. This is the first experimental evidence for the replication of arthropod lightly biomineralized structures in aluminosilicates shortly after death, while carcasses are not buried by sediments. The preservation of morphology through aluminosilicates could result in carcasses persisting on the seafloor for weeks without losing much external anatomical information. In this context, instantaneous burial capturing animals alive may not be a prerequisite for exceptional preservation as usually thought.

Synthesis and Characterization of Acrylic Resin/Kaolin Composites for Dielectric Applications

This study investigates the synthesis and characterization of acrylic resin/kaolin composites for dielectric applications. Acrylic resin, while widely used for its mechanical strength and ease of processing, exhibits limited dielectric properties, which restrict its use in high-performance electrical insulation. To address this, varying concentrations (0-70%) of raw kaolin, containing 71% kaolinite, were incorporated into an acrylic resin matrix to enhance its dielectric strength and thermal stability. Characterization techniques such as Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and dielectric spectroscopy were used to analyze the molecular structure, morphology, thermal behavior, and dielectric properties of the resulting composites. The study found that with up to 30% kaolin, the composites demonstrated good dielectric performance and thermal resistance, with good particle dispersion and minimal agglomeration. However, beyond 30% filler content, the dielectric and mechanical properties began to decline drastically. The results suggest that these composites could be potentially used for moderate dielectric applications such as insulators and capacitors.

Molecular Density Fluctuations Control Solubility and Diffusion for Confined Aqueous Hydrogen

Hydrogen's contribution to a sustainable energy transformation requires intermittent storage technologies, e.g., underground hydrogen storage (UHS). Toward designing UHS sites, atomistic molecular dynamics (MD) simulations are used here to quantify thermodynamic and transport properties for confined aqueous H2. Slit-shaped pores of width 10 and 20 Å are carved out of kaolinite. Within these pores, water yields pronounced hydration layers. Molecular H2 distributes along these hydration layers, yielding solubilities up to ∼25 times those in the bulk. Hydrogen accumulates near the siloxane surface, where water density fluctuates significantly. On the contrary, a dense hydration layer forms on the gibbsite surface, which is, for the most part, depleted of H2. Although confinement reduces water mobility, the diffusion of aqueous H2 increases as the kaolinite pore width decreases, also a consequence of water density fluctuations. These results relate to H2 permeability in underground hydrogen storage sites.

Development of toothpaste formulations containing mineral clays as abrasive agents and their effects on the physical properties of dental enamel

To assess the physical properties and topographical aspect of dental enamel's surface microhardness (KHN), surface roughness (Ra), and color parameters CIELAB (∆Eab*), CIEDE 2000 (∆E00), and whiteness index for dentistry (∆WID) after toothbrushing with experimental toothpaste formulations with the following mineral clay types: kaolin, Sparclay SGY, and Tersil CGY used as abrasive component. Scanning electron microscopy (SEM) was performed for topographical analyses purposes. A total of 96 bovine incisors were used in the experiment. They were divided into eight experimental groups (n = 12), namely: NC-negative control (no treatment), CT12-Colgate Total 12®, CMP-Colgate® Máxima Proteção Anticáries, K-kaolin experimental toothpaste, SGY-Sparclay SGY experimental toothpaste; CGY-Tersil CGY experimental toothpaste, SD-SiO2 experimental toothpaste, and CC-CaCO3 experimental toothpaste. All samples were subjected to mechanical brushing protocol with 5000 cycles and kept in artificial saliva with daily exchanges. KHN was analyzed through the mixed linear model for repeated measures over time. Ra was analyzed through nonparametric Kruskal Wallis and Dunn tests to compare the groups. Paired Wilcoxon test was run to compare experimental times. ∆WID, ∆Eab*, and ∆E00 were analyzed through Kruskal Wallis and Dunn tests. All analyses were performed in R* software, at 5% significance level. EXP_SGY recorded higher KHN than EXP_SiO2 and EXP_CaCO3, whereas EXP_K showed increased Ra in comparison to CMP (p = 0.0229). ∆Eab and ∆E00 were significantly higher in the CT12, EXP_SiO2, and EXP_CaCO3 groups than in the NC and EXP_K (p < 0.0001). There were no significant changes in ∆WID (p = 0.0852). According to SEM results, toothbrushing with experimental toothpastes added with mineral clay types did not have significant impact on enamel's polishing and smoothness. CLINICAL RELEVANCE: Mineral clays have a broad application in the cosmetic industry, and recently, they have been used in the formulation of vegan toothpaste.

Clay-reinforced PVC composites and nanocomposites

Clay-reinforced polyvinyl chloride (PVC) composites and nanocomposites are one of the newest and most important compounds studied and used in various applications, including the biomedical, automotive industry, water treatment, packaging, fire retarding, and construction. The most important clays used in the synthesis of these composites are Bentonite, Montmorillonite, Kaolinite, and Illite. The addition of these nanoclays to the PVC matrix improves mechanical properties, thermal stability, and yellowness index properties. In this chapter, a detailed study of PVC and its properties, types of nanoclays and their properties, modification of nanoclays, production methods of composites, and nanocomposites of PVC/clay, their characterization, and applications have been performed. Herein, the types, properties, and applications of PVC/clay nanocomposites, as well as their challenges and future remarks, are reviewed.

Controversial Issues Related to Dye Adsorption on Clay Minerals: A Critical Review

This critical review points out the most serious and problematic issues to be found in the literature on the adsorption of dyes on clay minerals. The introduction draws attention to the fundamental problems, namely the insufficient characterization of adsorbents, the influence of impurities on the adsorption of dyes, and the choice of inappropriate models for the description of the very complex systems that clay minerals and their systems represent. This paper discusses the main processes accompanying adsorption in colloidal systems of clay minerals. The relationship between the stability of the colloidal systems and the adsorption of dye molecules is analyzed. The usual methodological procedures for determining and evaluating the adsorption of dyes are critically reviewed. A brief overview and examples of modified clay minerals and complex systems for the adsorption of organic dyes are summarized. This review is a guide for avoiding some faults in characterizing the adsorption of organic dyes on clay minerals, to improve the procedure for determining adsorption, to evaluate results correctly, and to find an appropriate theoretical interpretation. The main message of this article is a critical analysis of the current state of the research in this field, but at the same time, it is a guide on how to avoid the most common problems and mistakes.

Deposition of silver nanoparticles on nanoscroll-supported inorganic solid using incompletely rolled-up kaolinite

Nanoscroll-supported platy particles were prepared by incomplete rolling-up of kaolinite layers; when the rolling-up of the kaolinite layer followed by its exfoliation incompletely proceeds, kaolinite nanoscrolls were found at the edge of kaolinite platy particles. To assess the support property of these nanoscroll-supported platy particles, when the deposition of Ag nanoparticles was conducted, these nanoparticles were present on the surface of platy particles and in the tubular interior of nanoscrolls at the edge of platy particles but absent on the surface of ordinal kaolinites, as revealed by X-ray diffraction, X-ray photoelectron spectroscopy, and transmission electron microscopy. These results indicated the successful formation and support property of nanoscroll-supported platy particles.

A Novel Vermiculite/TiO2 Composite: Synergistic Mechanism of Enhanced Photocatalysis towards Organic Pollutant Removal

There has been increasing concern over water pollution, which poses a threat to human life and health. Absorption by low-cost absorbents is considered to be a cost-effective and efficient route. However, the non-reusability of absorbents greatly limits their applications. In this study, a novel vermiculite/TiO2 composite combining the inexpensive absorbent with the commonly used photocatalyst was firstly synthesized via the sol-gel method. On the one hand, the organic pollutants are absorbed by vermiculite and then decomposed through the photocatalysis process, enabling the next round of absorption and creating an absorption-decomposition reusable cycle. On the other hand, the modulation effect of optical and electronic structure on the prepared TiO2 photocatalyst by the vermiculite incorporation could significantly improve the photocatalytic activity and eventually enhance the aforementioned cyclic degradation capacity. The layer-structured vermiculite (Vt) supports a uniform coverage of TiO2 at an optimized ratio, providing an optimal adsorption environment and contact area between the photocatalyst and methylene blue (MB) molecules. Vt/TiO2 heterojunction is formed with Si-O-Ti bonding, at which electrons transfer from Vt to TiO2, enriching electron density in TiO2 and favoring its photocatalytic activity. Furthermore, the incorporation of Vt increases the light absorption of TiO2 in the visible range by narrowing the optical band gap to 1.98 eV, which could promote the generation of photo-excited carriers. In addition, PL measurements revealed that the carrier recombination is substantially suppressed, and the charge separation and migration are greatly enhanced by a factor of 3. As a result, the decomposition rate of MB is substantially increased 5.3-fold, which is ascribed to the synergistic effects of the elevated photocatalysis and the large absorption capacity governed by the chemisorption mechanism of the intra-particle diffusion. These results pave the way for composite design towards efficient, economical, and pragmatic water pollution treatment.

Superhydrophobicity Mechanism and Nanoscale Profiling of PDMS-Modified Kaolinite Nanolayers via Ab Initio-MD Simulation and Atomic Force Microscopy Study

This study aimed to investigate the superhydrophobic mechanism of kaolinite particles modified with poly(dimethylsiloxane) (PDMS), which has potential as a superior hydrophobic coating. The study employed a combination of density functional theory (DFT) simulation modeling, characterization of the chemical properties and microstructure, contact angle measurements, and chemical force spectroscopy of atomic force microscopy. The results showed successful PDMS grafting onto the kaolinite surface, resulting in micro- and nanoscale roughness and a contact angle of 165°, indicating a successful superhydrophobic effect. The study also identified the mechanism of the hydrophobic interaction through two-dimensional micro- and nanoscale hydrophobicity images, highlighting the potential of this approach for developing new hydrophobic coatings.

Structural, elastic, electronic, and optical properties of NaAlSi3O8 and Al4[Si4O10](OH)8 from first-principles calculations

CONTEXT

Based on the first-principles calculations, this paper investigates the structural, elastic, electronic, and optical properties of albite and kaolinite, respectively. It is determined that both of them show structural stability, mechanical stability, and brittleness by calculating formation enthalpy, phonon dispersion, elastic, and mechanically relevant properties. Both materials are insulators with an indirect bandgap. By calculating the TDOS and PDOS, the main characteristics of the electronic structure of NaAlSi₃O₈ come from O-2p and Si-3p states, O-2p, and Al-3p states hybridization, similar to Al₄[Si₄O₁₀](OH)₈. The covalence of Si-O bonds in NaAlSi₃O₈ is greater than Al-O bonds, and the covalent property sequence of Si-O bands in NaAlSi₃O₈ is Si2-O3 > Si1-O4 > Si2-O2 > Si1-O8 > Si1-O6 > Si3-O2 > Si3-O4. The optical anisotropy of NaAlSi₃O₈ and Al₄[Si₄O₁₀](OH)₈ is analyzed.

METHODS

First-principles density functional theory (DFT) calculation was carried out by the CASTEP computer program. The GGA-PW91 exchange-correlation was used. The energy convergence tolerance, the maximum force, and the maximum displacement were set in the calculation.

Effect of Vanadium Oxide on the Crystallization of CaO-Al2O3-SiO2 Glass

This study investigated the effect of vanadium oxide on the crystallization of CaO-Al₂O₃-SiO₂ (CAS) glass. Specifically, this study subjected CAS glass-ceramics (GCs) with precipitated hexagonal platy particles of metastable CaAl₂Si₂O₈ (CAS GC-H), a layered crystal, that was prepared using metallic molybdenum (Mo) particles as nucleation agents. When the parent glass of CAS GC-H was crystallized with the addition of vanadium oxide in the 0.052-0.21 wt % range, the obtained platy particles of metastable CaAl₂Si₂O₈ displayed an increase in the aspect ratio from 20 to 15 compared with conventional CAS GC-Hs. In addition, no crystallization occurred in the CAS glass with vanadium oxide in the 0.052-0.21 wt % range in the absence of metallic Mo particles. Meanwhile, a CAS glass containing 1.0 wt % vanadium oxide without the addition of metallic Mo particles showed the precipitation of metastable CaAl₂Si₂O₈. Therefore, these results indicated that the aspect ratio of layered crystals in glass was controlled by the addition of a relatively small content of vanadium oxide, and a new nucleation agent for the precipitation of metastable CaAl₂Si₂O₈ in CAS glass using a relatively high content of vanadium oxide was developed.

Dielectrics and possible ferroelectricity in diol/glycerol covalently grafted kaolinites

Kaolinite possesses a structure with asymmetrically layered 1 : 1 dioctahedral aluminum silicate, and this structural property provides a useful platform for creating new cost-efficient functional materials that require noncentrosymmetric crystal packing. In this study, we prepared three covalently grafted kaolinites of propanediol (PD)/butanediol (BD)/glycerol (GL) by forming Al-O-C bonds between the OH groups of PD/BD/GL and the surface of kaolinite (K). Three covalently grafted kaolinites (K-PD, K-BD and K-GL) were characterized by X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy and microanalysis for C, H and N elements. The test of K-PD, K-BD and K-GL stirred with water at ambient conditions for 3 days demonstrated these hybrids showing extra high chemical stability to water. The dielectric spectra of three hybrids show two-step dielectric relaxation in the range of 1-10⁷ Hz, and the P-E measurements revealed the existence of ferroelectricity at room temperature with the spontaneous polarization, the remanent polarization and the coercive field of ∼0.014 μC cm^-2, ∼0.008 μC cm^-2 and ∼0.426 kV cm^-1 for K-PD, ∼0.017 μC cm^-2, ∼0.011 μC cm^-2 and ∼0.645 kV cm^-1 for K-BD, and ∼0.018 μC cm^-2, ∼0.011 μC cm^-2 and ∼0.141 kV cm^-1 for K-GL, respectively.

Effect of carbon on the co-presence of metallic tungsten as a nucleation agent and Eu2+ in glass: crystallization of CaO-Al2O3-SiO2 glass probed with Eu2+ luminescence

This study demonstrated simple redox control in glasses by improving the method used to added glass raw materials. Specifically, the effect of carbon on the co-presence of metallic tungsten (W) particles as nucleation agents and Eu2+ ions in CaO-Al2O3-SiO2 (CAS) glass was investigated via their crystallization to form CAS glass-ceramics (GCs). In this study, the glass specimens were prepared by mixing glass cullet containing metallic W particles and Eu2+ ions, respectively, with a glass batch containing carbon. Whereas the glass specimen was yellowish because of the presence of Eu2+ when carbon was not added during the remelting process, the glass specimen prepared with carbon was black because of the presence of metallic W particles. In addition, this specimen displayed the 470 nm emission band in its fluorescence spectrum recorded under 393 nm excitation, which was attributed to the presence of Eu2+. According to the fluorescence and transmission spectra, the glass specimen showed a darker coloration and more intense 470 nm emission band compared with the specimen prepared by the conventional melting method that included a remelting process. These results indicated that metallic W and Eu2+ were reduced with greater efficiency by the melting method that involved mixing the glass cullet and batch. In addition, the heat-treated glass specimen prepared by the aforementioned mixing method contained a greater amount of metastable CaAl2Si2O8 with increasing heat treatment time as revealed by X-ray diffraction analysis and scanning electron microscopy observation. The intensity of the 470 nm emission band decreased with increasing intensity of the band at 420 nm because of the incorporation of Eu2+ into the crystalline phase, and the increase in intensity of the 420 nm band was lineally proportional to the volume fraction of the crystallized glass specimens. The results therefore indicated that the co-presence of metallic W particles as nucleation agents and Eu2+ as a probe for tracking the crystallization process was achieved by the addition of carbon during the remelting process of mixed cullet containing W and Eu2+ through crystallization of the CAS glass. The results thus demonstrate the importance of improving the method used to added glass raw materials.

Microstructural Control of CaO-Al2O3-SiO2 Glass Ceramics by Oxidation and Mixing with Nucleation Agents

Microstructural control of CaO-Al₂O₃-SiO₂ (CAS) glass ceramics (GCs) was achieved by oxidation and mixing with nucleation agents. CAS GCs were precipitated with hexagonal platy particles of metastable CaAl₂Si₂O₈ layered crystals (CAS GC-H), which are typically prepared under a reductive atmosphere that forms metallic Mo or W particles as nucleation agents. The average particle size of crystals decreased significantly from 50 to 11 μm when the CAS GC-H containing metallic W particles was prepared under an oxidative atmosphere. Compared to this CAS-GC-H, the crystal particle size increased from 8-20 to 10-30 μm when the CAS GC-H was prepared by mixing glass cullet containing metallic Mo and that containing metallic W particles. These results indicate that one microstructure of CAS GC-H is controlled on the micrometer scale from a parent glass with one composition by varying the experimental conditions related to the glass melting state.

Rapid Synthesis of Kaolinite Nanoscrolls through Microwave Processing

Kaolinite nanoscrolls (NScs) are halloysite-like nanotubular structures of great interest due to their ability to superimpose halloysite's properties and applicability. Especially attractive is the ability of these NScs to serve as reaction vessels for the uptake and conversion of different chemical species. The synthesis of kaolinite NScs, however, is demanding due to the various processing steps that lead to extended reaction times. Generally, three intercalation stages are involved in the synthesis, where the second step of methylation dominates others in terms of duration. The present research shows that introducing microwave processing throughout the various steps can simplify the procedure overall and reduce the synthesis period to less than a day (14 h). The kaolinite nanoscrolls were obtained using two final intercalating agents, aminopropyl trimethoxy silane (APTMS) and cetyltrimethylammonium chloride (CTAC). Both produce abundant NScs, as corroborated by microscopy measurements as well as the surface area of the final products; APTMS intercalated NScs were 63.34 m²/g, and CTAC intercalated NScs were 73.14 m²/g. The nanoscrolls averaged about 1 μm in length with outer diameters of APTMS and CTAC intercalated samples of 37.3 ± 8.8 nm and 24.9 ± 6.1 nm, respectively. The availability of methods for the rapid production of kaolinite nanoscrolls will lead to greater utility of these materials in technologically significant applications.

Inorganic material-based Janus nanosheets: asymmetrically functionalized 2D-inorganic nanomaterials

During the past decade, various inorganic material-based Janus nanosheets have been prepared and their applications have been proposed. Inorganic material-based Janus nanosheets have various advantages over polymer-based Janus nanosheets, including the maintenance of their characteristic two-dimensional shape, and are expected to be applied as unique functional materials. Methods for regioselective functionalization of the two sides of the individual nanosheets are extremely important for the development of inorganic material-based Janus nanosheets. In this review, the preparation methods and applications of inorganic material-based Janus nanosheets are summarized from the point of view of inorganic nanosheet functionalization.

Assessment of the Crystallization Process of CaO-Al2O3-SiO2 Glass Probed with Tb3+ Luminescence

The ratio of the intensity of Tb³⁺ fluorescence at 543 nm because of an electric dipole transition (⁵D₄–⁷F₅) relative to that at 437 nm due to a magnetic dipole transition (⁵D₃–⁷F₄) was determined to be proportional to the amount of metastable CaAl₂Si₂O₈ crystals precipitated in CaO–Al₂O₃–SiO₂ glass. The present results indicate that Tb³⁺ luminescence can be used as a probe to evaluate the crystallization of glass.

The ratio of the intensity of Tb³⁺ fluorescence at 543 nm due to an electric dipole transition (⁵D₄−⁷F₅) to that at 437 nm because of magnetic dipole transition (⁵D₃−⁷F₄) was used to probe the precipitation of metastable CaAl₂Si₂O₈ crystals in CaO−Al₂O₃−SiO₂ glass.

Preparation of Chitosan/Clay Composites for Safe and Effective Hemorrhage Control

Uncontrolled hemorrhage from trauma or surgery can lead to death. In this study, chitosan/kaolin (CSK) and chitosan/montmorillonite (CSMMT) composites were prepared from chitosan (CS), kaolin (K), and montmorillonite (MMT) as raw materials to control bleeding. The physiochemical properties and surface morphology of CSK and CSMMT composites were analyzed by Fourier transform infrared spectrometry (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), zeta potentials, and X-ray fluorescence (XRF). The hemostatic mechanism was measured in vitro by activated partial thromboplastin time (APTT), prothrombin time (PT), in vitro clotting time, erythrocyte aggregation, and thromboelastogram (TEG). The hemostasis ability was further verified by using tail amputation and arteriovenous injury models in rats. The biocompatibility of CSK and CSMMT was evaluated by in vitro hemolysis, cytotoxicity assays, as well as acute toxicity test and skin irritation tests. The results show that CSK and CSMMT are promising composite materials with excellent biocompatibility and hemostatic properties that can effectively control bleeding.

Clay-Supported Metal Oxide Nanoparticles in Catalytic Advanced Oxidation Processes: A Review

Advanced oxidation processes (AOPs) utilizing heterogeneous catalysts have attracted great attention in the last decade. The use of solid catalysts, including metal and metal oxide nanoparticle support materials, exhibited better performance compared with the use of homogeneous catalysts, which is mainly related to their stability in hostile environments and recyclability and reusability. Various solid supports have been reported to enhance the performance of metal and metal oxide catalysts for AOPs; undoubtedly, the utilization of clay as a support is the priority under consideration and has received intensive interest. This review provides up-to-date progress on the synthesis, features, and future perspectives of clay-supported metal and metal oxide for AOPs. The methods and characteristics of metal and metal oxide incorporated into the clay structure are strongly influenced by various factors in the synthesis, including the kind of clay mineral. In addition, the benefits of nanomaterials from a green chemistry perspective are key aspects for their further considerations in various applications. Special emphasis is given to the basic schemes for clay modifications and role of clay supports for the enhanced mechanism of AOPs. The scaling-up issue is suggested for being studied to further applications at industrial scale.

Effects of kaolinite layer expansion and impurities on the solid-state reaction of kaolinite

Expanded kaolinite without impurities was found to serve as a suitable raw material for the rapid formation of metastable CaAl₂Si₂O₈ with the suppression of byproduct formation. This was accomplished based on the solid-state reaction of the kaolinite with calcium carbonate promoted by mechanical grinding.

Expansion of orderly stacked metakaolinite layers and order destruction using a kaolinite-tetraphenylphosphonium chloride intercalation compound

The expansion of metakaolinite layers with stacking order and the order destruction were examined by the heat treatment of a kaolinite-tetraphenylphosphonium chloride intercalation compound (Kaol-TPhPCl) at 540 °C under a nitrogen atmosphere followed by the manual grinding of the product using a mortar and a pestle. Fourier-transform infrared spectroscopy and solid-state ²⁷Al nuclear magnetic resonance spectroscopy with magic angle spinning revealed the kaolinite dehydroxylation. Moreover, the absence of kaolinite diffraction lines and the appearance of the 1.85 nm diffraction line in the X-ray diffraction pattern, together with the observation of the hexagonal plate-like morphology in the field-emission scanning electron microscopy, indicated the kaolinite amorphization with the orderly-stacked layers. These results, along with the disappearance of the 1.85 nm diffraction line upon the manual grinding of heat-treated Kaol-TPhPCl, clearly indicated the formation of expanded metakaolinite layers with stacking order and the subsequent order destruction by manual grinding.

Metakaolinite layers were expanded via the heat treatment of a kaolinite-tetraphenylphosphonium chloride intercalation compound and the obtained metakaolinite stacking order was destroyed upon manual grinding.

DFT Study of Electronic Structure and Optical Properties of Kaolinite, Muscovite, and Montmorillonite

Clay mineral materials have attracted attention due to their many properties and applications. The applications of clay minerals are closely linked to their structure and composition. In this paper, we studied the electronic structure properties of kaolinite, muscovite, and montmorillonite crystals, which are classified as clay minerals, by using DFT-based ab initio packages VASP and the OLCAO. The aim of this work is to have a deep understanding of clay mineral materials, including electronic structure, bond strength, mechanical properties, and optical properties. It is worth mentioning that understanding these properties may help continually result in new and innovative clay products in several applications, such as in pharmaceutical applications using kaolinite for their potential in cancer treatment, muscovite used as insulators in electrical appliances, and engineering applications that use montmorillonite as a sealant. In addition, our results show that the role played by hydrogen bonds in O-H bonds has an impact on the hydration in these crystals. Based on calculated total bond order density, it is concluded that kaolinite is slightly more cohesive than montmorillonite, which is consistent with the calculated mechanical properties.

A novel approach to characterization of a relatively unstable intercalation compound under ambient conditions: revisiting a kaolinite-acetone intercalation compound

Characteristics of a kaolinite-acetone intercalation compound prepared using a kaolinite N-methylformamide intercalation compound (Kaol-NMF) as an intermediate were obtained by a set of techniques with attention to suppressing evaporation and deintercalation of acetone. X-ray diffraction (XRD) with spectroscopic analyses, Fourier-transform infrared spectroscopy (FTIR) accompanied by solid-state ¹³C and ²⁹Si nuclear magnetic resonance (NMR) spectroscopy with cross polarization (CP) and magic angle spinning (MAS) enable us to demonstrate full replacement of a pre-intercalated NMF monolayer with an acetone monolayer between the layers of kaolinite with an increase in the basal spacing from 1.08 nm (Kaol-NMF) to 1.12 nm. In addition, the appearance of an additional OH stretching band at 3630 cm^-1 and the shift of the C[double bond, length as m-dash]O stretching band to a lower wavenumber, from 1714 to 1701 cm^-1, in the FTIR spectrum, along with a downfield shift of the signal due to C[double bond, length as m-dash]O groups from 209 ppm, where a singlet was observed in the liquid-state ¹³C NMR spectrum of acetone in CDCl₃, to 219 ppm in the ¹³C CP/MAS NMR spectrum, indicate hydrogen bond formation between interlayer hydroxyl groups of kaolinite and C[double bond, length as m-dash]O groups of the intercalated acetone molecules. These careful characterization studies provide information on an interaction between kaolinite and acetone under ambient conditions.

Preparation of a Three-Dimensional Porous Graphene Oxide-Kaolinite-Poly(vinyl alcohol) Composite for Efficient Adsorption and Removal of Ciprofloxacin

Because of the widespread presence of antibiotics in water, soil, and other environments, they pose great potential risks to the environment, threatening human and animal health. In this study, graphene oxide-kaolinite homogeneous dispersion was prepared by simple liquid phase exfoliation. The three-dimensional (3D) porous graphene oxide-kaolinite-poly(vinyl alcohol) composites were prepared by the cross-linking of poly(vinyl alcohol) and the formation of ice crystals during the freezing-drying process. Three influencing factors [adsorbent dosage, ciprofloxacin (CIP) initial concentration, and time] of CIP adsorption and removal were systematically analyzed by the response surface method. The order of significance for response values (CIP removal rate) was adsorbent dosage > CIP initial concentration > time. The 3D porous material showed good adsorption capacity of CIP, the theoretical maximum adsorption capacity was 408.16 mg/g, and it had good recyclability. By Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy analysis, it was found the composite adsorbs CIP by hydrogen bonding and π-π interaction. In conclusion, the graphene oxide-kaolinite-poly(vinyl alcohol) porous composite is a good candidate for efficient antibiotic wastewater treatment.

Understanding Powder X-ray Diffraction Profiles from Layered Minerals: The Case of Kaolinite Nanocrystals

Powder X-ray diffraction (PXRD) techniques are widely used to characterize the nature of stacking of submicrometer-wide nanometer-thick layers that form layered mineral nanocrystals, but application of these methods to infer the in-plane configuration of the layers is difficult. Line-profile-analysis algorithms based on the Bragg equation cannot describe the broken periodicity in the stacking direction. The Debye scattering equation is an alternative approach, but it is limited by the large-scale atomistic models required to capture the multiscale nature of the layered systems. Here, we solve the Debye scattering equation for kaolinite nanocrystals to understand the contribution of different layer-stacking defects to PXRD profiles. We chose kaolinite as a case study because its approximately constant composition and lack of interlayer expansion ensure that interstitial cations and/or molecules and substitutional ions can be ignored. We investigated the structure factor change as a function of crystal structural and microstructural features such as layer structure in-plane misorientation and shift (in or out of the 2D plane) and the diameter, number, and lateral indentation of the layers. Perfect and turbostratic stacking configurations bounded the range of intensity variation for hkl and 00l reflections, as well as for any scattering angle. A unique degree of disorder was computed by the average deviation from such limiting cases, and multivariate analysis was used to interpret the observed diffraction profiles. Analysis of the data for KGa-1, KGa-2, and API-9 standard kaolinites demonstrated that the estimated densities of different stacking defects are highly correlated. In addition, analysis of API-9 particle-size fractions revealed a dispersion of four or more components in the standard sample. The results illustrate that the use of a distribution of sizes, defects, and even individual kaolinite components is necessary to accurately characterize any sample of natural kaolinite.

Functionalization-Induced Self-Assembly of Polystyrene/Kaolinite in Situ Nanocomposites into Giant Vesicles

We report a facile functionalization strategy for fabrication of giant, inorganic-polymer hybrid vesicles by controlled aminosilyl/vinylsilyl functionalization (AS/VS) of the aluminol layer in kaolinite (Kaol) by intercalation and subsequent polymerization of styrene with the in situ polystyrene clay nanocomposite (PCN), followed by self-assembly in solvents. The synergistic effect of the AS/VS ratio on functionalization-assisted intercalation of Kaol was established in 1:3AS/VS-Kaol by the greater extent of formation of higher interlayer spacing corresponding to 1.12 nm compared to 1:1AS/VS-Kaol. As the AS/VS ratio was increased, the PCN synthesized showed an increase in molecular weight attributed to higher vinyl functionalization of Kaol. The PCN, 1:3AS/VS-Kaol/PS, showed self-assembly in tetrahydrofuran at 2.5 mg mL-1 into giant vesicles of 2-6 μm diameter with a wall thickness of 300-400 nm. This result is attributed to the functionalization-induced molecular mass-directed bilayer assembly of the delaminated, Janus-type, modified Kaol in a polar aprotic solvent by end-to-end hydrogen bonding involving terminal -OH groups along the wall and -NH2 groups laterally and further stabilized by the π-π interactions of the phenyl moiety along the periphery. Rhodamine-loaded vesicles showed a controlled release in buffer solutions of pH 7.0 and 9.0, attributed to the amino group-assisted pore formation. In a buffer solution of pH 4.0, rapid release of the dye was observed because of the collapse of the vesicle directed by protonation of the amino group. This study forms the first report on a novel method for the synthesis of rigid vesicles by functionalization-induced self-assembly of Kaol-based in situ PCN for possible applications in the cost-effective controlled delivery of drugs or cosmetics for topical applications.

Flow and Tableting Behaviors of Some Egyptian Kaolin Powders as Potential Pharmaceutical Excipients

The present work aimed at assessing the pharmaceutical tableting properties of some Egyptian kaolin samples belong to the Abu Zenima kaolin deposits (estimated at 120 million tons). Four representative samples were selected based on kaolinite richness and their structural order-disorder degree, and after purification, they were dried at 70 °C and heated from room temperature up to 400 °C (10 °C/min). Mineralogy, micromorphology, microtexture, granulometry, porosimetry, moisture content, bulk and tapped density, direct and indirect flowability, and tableting characteristics are studied. Results indicated that purified kaolin samples were made up of 95–99% kaolinite, <3% illite, 1% quartz and 1% anatase. The powder showed mesoporous character (pore diameters from 2 to 38 nm and total pore volume from 0.064 to 0.136 cm3/g) with dominance of fine nanosized particles (<1 μm–10 nm). The powder flow characteristics of both the ordered (Hinckley Index HI > 0.7, crystallite size D001 > 30 nm) and disordered (HI < 0.7, D001 < 30 nm) kaolinite-rich samples have been improved (Hausner ratio between 1.24 and 1.09) as their densities were influenced by thermal treatment (with some observed changes in the kaolinite XRD reflection profiles) and by moisture content (variable between 2.98% and 5.82%). The obtained tablets exhibited hardness between 33 and 44 N only from the dehydrated powders at 400 °C, with elastic recovery (ER) between 21.74% and 25.61%, ejection stress (ES) between 7.85 and 11.45 MPa and tensile fracture stress (TFS) between 1.85 and 2.32 MPa, which are strongly correlated with crystallinity (HI) and flowability (HR) parameters. These findings on quality indicators showed the promising pharmaceutical tabletability of the studied Egyptian kaolin powders and the optimization factors for their manufacturability and compactability.

Liquid-Phase Exfoliation of Kaolinite by High-Shear Mixer with Graphite Oxide as an Amphiphilic Dispersant

In this study, a simple, effective, and versatile method was used for the exfoliation of kaolinite by high-shear mixer with graphite oxide as an an amphiphilic dispersant. During the liquid-phase exfoliation process, the co-exfoliation of kaolinite and graphite oxide was realized. Compared with the directly exfoliated kaolinite, when 5% graphite oxide was added to facilitate exfoliation, 95% of the obtained nanosheets were distributed between 0.1 and 0.7 μm, in which the number of layers was less than 5, and part of them were curled into nanoscrolls structure with a length of 0.2-0.9 μm. The Brunauer-Emmett-Teller surface area of the graphite oxide assisted exfoliated kaolinite was 2.1 times that of the directly exfoliated kaolinite. Meanwhile, the graphite oxide assisted exfoliated kaolinite exhibited excellent adsorption properties for MB, whose theoretical maximum adsorption capacity was 250 mg/g, significantly higher than that of the directly exfoliated kaolinite, which was about 111 mg/g. It has been verified that the exfoliation method is efficient and facile and can be applied extensively.

Preparation and Comparative Stability of a Kaolinite-Tetrabutylphosphonium Bromide Intercalation Compound for Heat and Solvent Treatments

A kaolinite-tetrabutylphosphonium bromide (TBPBr) intercalation compound (Kaol-TBPBr) was prepared from kaolinite providing inorganic aluminosilicate layers and TBPBr as intercalated salts between the layers through the use of an intermediate, a kaolinite-dimethylsulfoxide (DMSO) intercalation compound (Kaol-DMSO). The experimental data through complementary techniques, including X-ray diffraction, Fourier transform infrared spectroscopy, solid-state ¹³C and ²⁹Si nuclear magnetic resonance (NMR) spectroscopy with cross polarization and magic angle spinning, inductively coupled plasma emission spectrometry, and ion chromatography, indicate complete removal of DMSO and intercalation of TBPBr with an increase in the basal spacing from 1.12 nm (Kaol-DMSO) to 1.53 nm (Kaol-TBPBr). In contrast to a similar intercalation compound, a kaolinite-tetrabutylammonium bromide (TBABr) intercalation compound (Kaol-TBABr) with a basal spacing of 1.51 nm, Kaol-TBPBr displayed interesting features such as enhanced thermal stabilities as well as bold resistance against several solvents. Kaol-TBPBr withstood thermal decomposition of the organic species over 100 °C much better than Kaol-TBABr. When Kaol-TBPBr and Kaol-TBABr were refluxed in methanol, ethanol, acetone, or toluene for 1 day, Kaol-TBPBr preserved the expanded kaolinite layers, while the Kaol-TBABr structure completely collapsed due to the release of TBABr. Thus, with these particular and unique features of Kaol-TBPBr, organophosphonium salts appear to be promising guest species for intercalation chemistry of kaolinite.