On the use of dexamethasone-loaded liposomes to induce the osteogenic differentiation of human mesenchymal stem cells

Recent advances of nanoparticles on bone tissue engineering and bone cells

With the development of biotechnology, biomaterials have been rapidly developed and shown great potential in bone regeneration therapy and bone tissue engineering. Nanoparticles have attracted the attention of researches and have applied in various fields especially in the biomedical field as the special physicochemical properties. Nanoparticles were found to regulate bone remodeling depending on their size, shape, composition, and charge. Therefore, in-depth research was necessary to provide the basic support to select the most suitable nanoparticles for bone relate diseases treatment. This article reviews the current development of nanoparticles in bone tissue engineering, focusing on drug delivery, gene delivery, and cell labeling. In addition, the research progress on the interaction of nanoparticles with bone cells, focusing on osteoblasts, osteoclasts, and bone marrow mesenchymal stem cells, and the underlying mechanism were also reviewed. Finally, the current challenges and future research directions are discussed. Thus, detailed study of nanoparticles may reveal new therapeutic strategies to improve the effectiveness of bone regeneration therapy or other bone diseases.

Research Progress of Design Drugs and Composite Biomaterials in Bone Tissue Engineering

Bone, like most organs, has the ability to heal naturally and can be repaired slowly when it is slightly injured. However, in the case of bone defects caused by diseases or large shocks, surgical intervention and treatment of bone substitutes are needed, and drugs are actively matched to promote osteogenesis or prevent infection. Oral administration or injection for systemic therapy is a common way of administration in clinic, although it is not suitable for the long treatment cycle of bone tissue, and the drugs cannot exert the greatest effect or even produce toxic and side effects. In order to solve this problem, the structure or carrier simulating natural bone tissue is constructed to control the loading or release of the preparation with osteogenic potential, thus accelerating the repair of bone defect. Bioactive materials provide potential advantages for bone tissue regeneration, such as physical support, cell coverage and growth factors. In this review, we discuss the application of bone scaffolds with different structural characteristics made of polymers, ceramics and other composite materials in bone regeneration engineering and drug release, and look forward to its prospect.

Dexamethasone: Insights into Pharmacological Aspects, Therapeutic Mechanisms, and Delivery Systems

Dexamethasone (DEX) has been widely used to treat a variety of diseases, including autoimmune diseases, allergies, ocular disorders, cancer, and, more recently, COVID-19. However, DEX usage is often restricted in the clinic due to its poor water solubility. When administered through a systemic route, it can elicit severe side effects, such as hypertension, peptic ulcers, hyperglycemia, and hydro-electrolytic disorders. There is currently much interest in developing efficient DEX-loaded nanoformulations that ameliorate adverse disease effects inhibiting advancements in scientific research. Various nanoparticles have been developed to selectively deliver drugs without destroying healthy cells or organs in recent years. In the present review, we have summarized some of the most attractive applications of DEX-loaded delivery systems, including liposomes, polymers, hydrogels, nanofibers, silica, calcium phosphate, and hydroxyapatite. This review provides our readers with a broad spectrum of nanomedicine approaches to deliver DEX safely.

2D Covalent Organic Framework Direct Osteogenic Differentiation of Stem Cells

2D covalent organic frameworks (COFs) are an emerging class of crystalline porous organic polymers with a wide-range of potential applications. However, poor processability, aqueous instability, and low water dispersibility greatly limit their practical biomedical implementation. Herein, a new class of hydrolytically stable 2D COFs for sustained delivery of drugs to direct stem cell fate is reported. Specifically, a boronate-based COF (COF-5) is stabilized using amphiphilic polymer Pluronic F127 (PLU) to produce COF-PLU nanoparticles with thickness of ≈25 nm and diameter ≈200 nm. These nanoparticles are internalized via clathrin-mediated endocytosis and have high cytocompatibility (half-inhibitory concentration ≈1 mg mL^-1 ). Interestingly, the 2D COFs induce osteogenic differentiation in human mesenchymal stem cells, which is unique. In addition, an osteogenic agent-dexamethasone-is able to be loaded within the porous structure of COFs for sustained delivery which further enhances the osteoinductive ability. These results demonstrate for the first time the fabrication of hydrolytically stable 2D COFs for sustained delivery of dexamethasone and demonstrate its osteoinductive characteristics.

Erythrocyte-derived liposomes for the treatment of inflammatory diseases

Effective and safe therapies to counteract persistent inflammation are necessary. We developed erythrocyte-derived liposomes (EDLs) with intrinsic anti-inflammatory activity. The EDLs were prepared using lipids extracted from erythrocyte membranes, which are rich in omega-3 fatty acids with several health benefits. Diclofenac, a widely used anti-inflammatory drug, was incorporated into EDLs in relevant therapeutic concentrations. The EDLs were also functionalized with folic acid to allow their active targeting of M1 macrophages, which are key players in inflammatory processes. In the presence of lipopolysaccharide (LPS)-stimulated macrophages, empty EDLs and EDLs incorporating diclofenac were able to reduce the levels of important pro-inflammatory cytokines, namely interleukin-6 (IL-6; ≈85% and 77%, respectively) and tumor necrosis factor-alpha (TNF-α; ≈64% and 72%, respectively). Strikingly, cytocompatible concentrations of EDLs presented similar effects to dexamethasone, a potent anti-inflammatory drug, in reducing IL-6 and TNF-α concentrations, demonstrating the EDLs potential to be used as bioactive carriers in the treatment of inflammatory diseases.

Comparison of Osteogenic Potential of Phenytoin with Dexamethasone in Cultured Dental Pulp Stem Cells

Background

One of the adverse effects of phenytoin (diphenylhydantoin, DPH) is enlargement of facial features. Although there are some reports on anabolic action of phenytoin on bone cells, the osteogenic potential of DPH on mesenchymal stem cells has not been studied. The purpose of this study was to evaluate the osteogenic potential of DPH on dental pulp stem cells (DPSCs).

Methods

Human DPSCs were isolated and characterized by flow cytometry; presence of CD29 and CD44 and absence of CD34 and CD45 were performed to confirm the mesenchymal stem cells. Isolated DPSCs were differentiated either in conventional osteogenic medium with Dexamethasone or medium containing different concentration of phenytoin (12.5, 25, 100, and 200 µM). The osteogenic differentiation evaluated by performing western blot test for Runt-related transcription factor 2 (RUNX2), osteopontin and alkaline phosphatase (ALP) also alizarin red S staining to measure the mineralization of cells.

Results

Our results showed morphological changes and mineralization of DPSCs by using DPH were comparable with dexamethasone. Moreover, western blot results of DPH group showed significant increase of ALP, RUNX2 and osteopontin (OSP) in comparison with control.

Conclusion

The data of present study showed the osteogenic activity of phenytoin, considering as an alternative of dexamethasone for inducing osteogenic differentiation of dental pulp stem cells.

Engineering osteogenic microenvironments by combination of multilayers from collagen type I and chondroitin sulfate with novel cationic liposomes

Cationic liposomes composed of a novel lipid (N-{6-amino-1-[N-(9Z) -octadec9-enylamino] -1-oxohexan-(2S) -2-yl} -N'- {2- [N, N-bis(2-aminoethyl) amino] ethyl} -2-hexadecylpropandiamide) (OO4) and dioleoylphosphatidylethanolamine (DOPE) possess high amounts of amino groups and are promising systems for lipofection. Moreover, these cationic liposomes can also be used as a polycationic entity in multilayer formation using layer-by-layer technique (LbL), which is a method to fabricate surface coatings by alternating adsorption of polyanions and polycations. Since liposomes are suitable for endocytosis by or fusion with cells, controlled release of their cargo on site is possible. Here, a polyelectrolyte multilayer (PEM) system was designed of chondroitin sulfate (CS) and collagen type I (Col I) by LbL technique with OO4/DOPE liposomes embedded in the terminal layers to create an osteogenic microenvironment. Both, the composition of PEM and cargo of the liposomes were used to promote osteogenic differentiation of C2C12 myoblasts as in vitro model. The internalization of cargo-loaded liposomes from the PEM into C2C12 cells was studied using lipophilic (Rhodamine-DOPE conjugate) and hydrophilic (Texas Red-labeled dextran) model compounds. Besides, the use of Col I and CS should mimic the extracellular matrix of bone for future applications such as bone replacement therapies. Physicochemical studies of PEM were done to characterize the layer growth, thickness, and topography. The adhesion of myoblast cells was also evaluated whereby the benefit of a cover layer of CS and finally Col I above the liposome layer was demonstrated. As proof of concept, OO4/DOPE liposomes were loaded with dexamethasone, a compound that can induce osteogenic differentiation. A successful induction of osteogenic differentiation of C2C12 cells with the novel designed liposome-loaded PEM system was shown. These findings indicate that designed OH4/DOPE loaded PEMs have a high potential to be used as drug delivery or transfection system for implant coating in the field of bone regeneration and other applications.

Dexamethasone-loaded hollow hydroxyapatite microsphere promotes odontogenic differentiation of human dental pulp cells in vitro

A sustained-release system was established by synthesis of dexamethasone-loaded hollow hydroxyapatite microspheres (DHHAM). The in vitro effect of DHHAM on odontogenic differentiation of human dental pulp cells (hDPCs) was evaluated. Hollow hydroxyapatite microspheres (HHAM) are successfully manufactured using simple biomimetic one-step strategy in the presence of glycine and sodium dodecyl sulfonate. Dexamethasone (DEX) was loaded to the system after the formation of HHAM. The drug encapsulation capacity of DEX in HHAM is 40.3% and its loading efficiency is 16.7%. The cumulative release of DEX in vitro is 55% up to 35 days. Results of Real-time Polymerase Chain Reaction (Real-time PCR), alkaline phosphatase (ALP) activity and Alizarin Red S staining revealed that DHHAM can obviously promote bio-mineralization of hDPCs in the absence of osteogenic medium and enhance the gene expression of ALP, Runt-related transcription factor 2 (RUNX2), osteocalcin, dentin sialophosphoprotein (DSPP) and dentin matrix protein 1 (DMP1). The data suggest that sustained release of DEX from DHHAM could efficiently enhance odontogenic differentiation of hDPCs.

Efficacy of liposomal dosage forms and hyperosmolar salines in experimental pharmacotherapy of acute lung injury

Introduction: Hypertonic sodium chloride solutions and liposomal drugs with pulmotropic effect are of great interest for the treatment of acute lung injury (ALI). The results of the studies on the efficacy of hypertonic solutions and liposomes in ALI treatment are currently controversial.

Materials and methods: For the experiment, liposomes with dexamethasone, N-acetylcysteine (NAC), aprotinin and dye Cyanine-7 (Cy-7) were obtained. A liposome analysis was performed by means of spectrophotometry. ALI was modeled in rats by the administration of the damaging agents into the trachea. The experimental agents were injected once intravenously after the modeling of ALI. For experimental therapy used liposomal agents, 7.5% hypertonic saline (HS) and HyperHAES solutions in the respective groups. The efficacy of the therapy was assessed by the survival of animals, functional indicators of the cardiovascular and respiratory systems, and by the lung-body ratio. The biodistribution of liposomes after intravenous administration was investigated in mice through using a fluorescent dye Cy-7. The biodistribution of liposomes with Cy-7 was assessed using bioimaging according to the fluorescence intensity of internal organs (lungs, liver, and kidneys) and blood, expressed as dye concentration according to the calibration dependence of dye concentrarion on fluorescence intensity.

Results and discussion: All the studied liposomal drugs were effective for the pharmacological correction of ALI. Hypertonic solutions, unlike liposomal drugs, were less likely to prevent the development of pulmonary edema. All the studied therapeutic agents increased the survival rate of the laboratory animals with ALI. The most effective experimental agent was liposomal dexamethasone. The use of drugs in form of simple liposomes with average diameter of 350 nm provided for a higher concentration of the drug in the lungs within the first 40 minutes after intravenous administration.

Conclusion: Intravenous administration of liposomal forms is promising for the pharmacotherapy of acute lung injury.

Influence of PDLA nanoparticles size on drug release and interaction with cells

Polymeric nanoparticles (NPs) are strong candidates for the development of systemic and targeted drug delivery applications. Their size is a determinant property since it defines the NP-cell interactions, drug loading capacity, and release kinetics. Herein, poly(d,l-lactic acid) (PDLA) NPs were produced by the nanoprecipitation method, in which the influence of type and concentration of surfactant as well as PDLA concentration were assessed. The adjustment of these parameters allowed the successful production of NPs with defined medium sizes, ranging from 80 to 460 nm. The surface charge of the different NPs populations was consistently negative. Prednisolone was effectively entrapped and released from NPs with statistically different medium sizes (i.e., 80 or 120 nm). Release profiles indicate that these systems were able to deliver appropriate amounts of drug with potential applicability in the treatment of inflammatory conditions. Both NPs populations were cytocompatible with human endothelial and fibroblastic cells, in the range of concentrations tested (0.187-0.784 mg/mL). However, confocal microscopy revealed that within the range of sizes tested in our experiments, NPs presenting a medium size of 120 nm were able to be internalized in endothelial cells. In summary, this study demonstrates the optimization of the processing conditions to obtain PDLA NPs with narrow size ranges, and with promising performance for the treatment of inflammatory diseases. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 482-493, 2019.

Advances and perspectives in tooth tissue engineering

Bio-engineered teeth that can grow and remodel in a manner similar to that of natural teeth have the potential to serve as permanent replacements to the currently used prosthetic teeth, such as dental implants. A major challenge in designing functional bio-engineered teeth is to mimic both the structural and anisotropic mechanical characteristics of the native tooth. Therefore, the field of dental and whole tooth regeneration has advanced towards the molecular and nanoscale design of bio-active, biomimetic systems, using biomaterials, drug delivery systems and stem cells. The focus of this review is to discuss recent advances in tooth tissue engineering, using biomimetic scaffolds that provide proper architectural cues, exhibit the capacity to support dental stem cell proliferation and differentiation and sequester and release bio-active agents, such as growth factors and nucleic acids, in a spatiotemporal controlled manner. Although many in vitro and in vivo studies on tooth regeneration appear promising, before tooth tissue engineering becomes a reality for humans, additional research is needed to perfect methods that use adult human dental stem cells, as opposed to embryonic dental stem cells, and to devise the means to generate bio-engineered teeth of predetermined size and shape. Copyright © 2016 John Wiley & Sons, Ltd.

[Effect of bone morphogenetic protein 2 and dexamethason on proliferation and differentiation of human dental pulp cells in vitro]

Objective

To investigate the effect of bone morphogenetic protein 2 (BMP-2) and dexamethason (DXM) on proliferation and differentiation of human dental pulp cells in vitro.

Methods

Primary human dental pulp cells were cultured in vitro by tissue culture method. The 3rd generation cells were used to identify cell phenotype for vimentin and cytokeratin by immunocytochemistry staining. The 3-5 generations of human dental pulp cells were randomly divided into 4 groups: 100 ng/mL BMP-2 (group A), 1×10 ^-8 mol/L DXM (group B), and both 100 ng/mL BMP-2 and 1×10 ^-8 mol/L DXM (group C) were added; neither BMP-2 nor DXM was added in group D as control group. The cell growth curve was drawn at 1, 3, 5, and 7 days after culture. The expressions of osteo/dentanogenic genes including alkaline phosphatase (ALP), dentin sialophoshoprotein (DSPP), and dentin matrix protein 1 (DMP-1) were detected by RT-PCR analysis at 5 and 7 days after culture, the ratio between the positive staining area and the total area by ALP staining at 14 days, and absorbance ( A) value at 562 nm by alizarin red staining at 21 days after culture.

Results

Human dental pulp cells were successfully isolated and cultured, which were long fusiform and showed a positive reaction for vimentin and a negative reaction for cytokeratin. The growth curve indicated that cells increased with the extending of incubation time, reached a peak at 5 days, then reduced at 7 days to the level at 3 days. At 5 days after culture, the cells were significantly more in groups A, B, and C than group D ( P<0.05), in group C than group A ( P<0.05), and in group A than group B ( P<0.05). RT-PCR analysis showed that the mRNA expressions of ALP, DSPP, and DMP-1 at 5 days were significantly higher in groups A, B, and C than group D ( P<0.05), and in group C than groups A and B ( P<0.05), but no significant difference was found between groups A and B ( P>0.05); the mRNA expression of DSPP in groups A, B, and C was significantly higher than that in group D ( P<0.05), but there was no significant difference in mRNA expressions between other groups at 7 days ( P>0.05). At 14 days, positive staining in varying degrees was observed in each group, especially in group C; the ratio between the positive staining area and the total area was significantly higher in group C than groups A, B, and D ( P<0.05), and in groups A and B than group D ( P<0.05), but there was no significant difference between groups A and B ( P>0.05). At 21 days, there were a variety of mineralized nodules in groups A, B, and C in nonuniformly scattered or clustered distribution, but no mineralized nodules were observed in group D. The A values of mineralized nodules showed significant difference between groups ( P<0.05).

Conclusion

BMP-2 may be more effective in promoting proliferation of human dental pulp cells than DXM. Combined application of BMP-2 and DXM can remarkably promote the proliferation and differentiation of human dental pulp cells.

Nanoparticles for bone tissue engineering

Tissue engineering (TE) envisions the creation of functional substitutes for damaged tissues through integrated solutions, where medical, biological, and engineering principles are combined. Bone regeneration is one of the areas in which designing a model that mimics all tissue properties is still a challenge. The hierarchical structure and high vascularization of bone hampers a TE approach, especially in large bone defects. Nanotechnology can open up a new era for TE, allowing the creation of nanostructures that are comparable in size to those appearing in natural bone. Therefore, nanoengineered systems are now able to more closely mimic the structures observed in naturally occurring systems, and it is also possible to combine several approaches - such as drug delivery and cell labeling - within a single system. This review aims to cover the most recent developments on the use of different nanoparticles for bone TE, with emphasis on their application for scaffolds improvement; drug and gene delivery carriers, and labeling techniques. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:590-611, 2017.

Physical properties and biological interactions of liposomes developed as a drug carrier in the field of regenerative medicine

Liposomes are used for encapsulation of the active compounds in different therapies, with the increasing frequency. The important areas of clinical applications of liposomes are cancer targeted treatment, antibiotic delivery or regenerative medicine. The liposomes can transfer both hydrophilic and hydrophobic compounds and have the lipid bilayer which imitates the cell membrane. Liposomes additionally may extend half-live period of drugs and protect them against the elimination in different ways, such as phagocytosis, enzymatic cleavage or exclusion by detoxification. The size and charge of liposomes play an important role in drug distribution and absorption into the cell. Limited data is available on the effects of liposomes on stem cells and progenitor cells. In this article, we examined the effect of charged conventional liposomes on growth of mesenchymal and blood stem cells isolated from umbilical cord. The data suggest a likelihood, that positively charged liposomes could impair stem cell growth and metabolism. Different methodological approaches allowed for the selection of negatively charged liposomes for further experiments, as the only type of liposomes which has the lowest cytotoxicity and does not affect hematopoietic cell proliferation.

Dual release of a hydrophilic and a hydrophobic osteogenic factor from a single liposome

Dual release of growth/differentiation factors from liposomes induced osteogenic differentiation of mesenchymal stem cells.

Liposomes in tissue engineering and regenerative medicine

Liposomes are vesicular structures made of lipids that are formed in aqueous solutions. Structurally, they resemble the lipid membrane of living cells. Therefore, they have been widely investigated, since the 1960s, as models to study the cell membrane, and as carriers for protection and/or delivery of bioactive agents. They have been used in different areas of research including vaccines, imaging, applications in cosmetics and tissue engineering. Tissue engineering is defined as a strategy for promoting the regeneration of tissues for the human body. This strategy may involve the coordinated application of defined cell types with structured biomaterial scaffolds to produce living structures. To create a new tissue, based on this strategy, a controlled stimulation of cultured cells is needed, through a systematic combination of bioactive agents and mechanical signals. In this review, we highlight the potential role of liposomes as a platform for the sustained and local delivery of bioactive agents for tissue engineering and regenerative medicine approaches.

Instructive nanofibrous scaffold comprising runt-related transcription factor 2 gene delivery for bone tissue engineering

Inducer molecules capable of regulating mesenchymal stem cell differentiation into specific lineages have proven effective in basic science and in preclinical studies. Runt-related transcription factor 2 (RUNX2) is considered to be the central gene involved in the osteoblast phenotype induction, which may be advantageous for inducing bone tissue regeneration. This work envisions the development of a platform for gene delivery, combining liposomes as gene delivery devices, with electrospun nanofiber mesh (NFM) as a tissue engineering scaffold. pDNA-loaded liposomes were immobilized at the surface of functionalized polycaprolactone (PCL) NFM. Human bone-marrow-derived mesenchymal stem cells (hBMSCs) cultured on RUNX2-loaded liposomes immobilized at the surface of electrospun PCL NFM showed enhanced levels of metabolic activity and total protein synthesis. RUNX2-loaded liposomes immobilized at the surface of electrospun PCL NFMs induce a long-term gene expression of eGFP and RUNX2 by cultured hBMSCs. Furthermore, osteogenic differentiation of hBMSCs was also achieved by the overexpression of other osteogenic markers in medium free of osteogenic supplementation. These findings demonstrate that surface immobilization of RUNX2 plasmid onto elestrospun PCL NFM can produce long-term gene expression in vitro, which may be employed to enhance the osteoinductive properties of scaffolds used for bone tissue engineering strategies.

Regenerative repair of damaged meniscus with autologous adipose tissue-derived stem cells

Mesenchymal stem cells (MSCs) are defined as pluripotent cells found in numerous human tissues, including bone marrow and adipose tissue. Such MSCs, isolated from bone marrow and adipose tissue, have been shown to differentiate into bone and cartilage, along with other types of tissues. Therefore, MSCs represent a promising new therapy in regenerative medicine. The initial treatment of meniscus tear of the knee is managed conservatively with nonsteroidal anti-inflammatory drugs and physical therapy. When such conservative treatment fails, an arthroscopic resection of the meniscus is necessary. However, the major drawback of the meniscectomy is an early onset of osteoarthritis. Therefore, an effective and noninvasive treatment for patients with continuous knee pain due to damaged meniscus has been sought. Here, we present a review, highlighting the possible regenerative mechanisms of damaged meniscus with MSCs (especially adipose tissue-derived stem cells (ASCs)), along with a case of successful repair of torn meniscus with significant reduction of knee pain by percutaneous injection of autologous ASCs into an adult human knee.

Immobilization of bioactive factor-loaded liposomes on the surface of electrospun nanofibers targeting tissue engineering

Dexamethasone-loaded liposomes immobilized at the surface of electrospun polycaprolactone nanofiber meshes successfully promoted the osteogenic differentiation of human bone marrow-derived mesenchymal stem cells.

Hyaluronic acid/poly-l-lysine bilayered silica nanoparticles enhance the osteogenic differentiation of human mesenchymal stem cells

The coating of silica nanoparticles with a bilayer of poly-l-lysine and hyaluronic acid enhances the osteogenic differentiation of human bone marrow stem cells at low nanoparticle concentrations (25 μg mL⁻¹ and 12.5 μg mL⁻¹).