Hydrothermal synthesis of novel heterostructured Ag/TiO2 /CuFe2 O4 nanocomposite: Characterization, enhanced photocatalytic degradation of methylene blue dye, and efficient antibacterial studies

Immobilization of Nickel Oxide Nanoparticles on Cotton Fiber Under Gamma Radiation and Its Catalytic Activity

Nickel ions were reduced on the surface of cotton fibers under the effect of gamma radiation. The NiO nanoparticles grew as semispherical aggregates along the cotton fibers with average crystallite size of 32 nm as calculated from the x-ray diffraction results. The FTIR data showed the presence of a new IR peak at 613 cm-1 (assigned to the NiO stretching vibration) confirming the successful loading of NiO nanoparticles into cotton matrix. The NiO nanoparticles were adhered to the surface of cotton fibers through the complexation with hydroxyl and carbonyl groups. The NiO@cotton nanocomposite showed high performance in the catalytic degradation of both 4-nitrophenol and bromophenol blue. The rate constant of the catalytic degradation of 4-nitrophenol was 8.24 × 10-3 s-1 at pH = 10. The resultant heterogeneous catalyst is green, cheap, separable/recyclable, and has considerable catalytic activity.

Emerald eco-synthesis: harnessing oleander for green silver nanoparticle production and advancing photocatalytic MB degradation with TiO2&CuO nanocomposite

The tertiary composite of TiO2/CuO @ Ag (TCA) were synthesized by the solid state method using different ratios of TiO2/CuO NCs and Ag NPs. The structural, morphological, and optical properties of nanocomposites were analyzed by scanning electron microscope, Transmission electron microscope, X-ray diffraction, Fourier transform infrared spectra, UV-Vis diffuse reflectance spectra (UV-Vis/DRS) and photoluminescence spectrophotometry. The results showed enhanced activity of TCA hybrid nano crystals in oxidizing MB in water under visible light irradiation compared to pure TiO2. The photocatalytic performance TCA samples increased with suitable Ag content. The results show that the photo degradation efficiency of the TiO2 compound improved from 13 to 85% in the presence of TiO2-CuO and to 98.87% in the presence of Ag containing TiO2-CuO, which is 7.6 times higher than that of TiO2. Optical characterization results show enhanced nanocomposite absorption in the visible region with long lifetimes between e/h+ at optimal TiO2-CuO/Ag (TCA2) ratio. Reusable experiments indicated that the prepared TCA NC photo catalysts were stable during MB photo degradation and had practical applications for environmental remediation.

G. M, Pandit S, Alghamdi S, Almehmadi M, Allahyani M, Awwad NS, Sharma R. Eco-friendly synthesized nanoparticles as antimicrobial agents: an updated review

Green synthesis of NPs has gained extensive acceptance as they are reliable, eco-friendly, sustainable, and stable. Chemically synthesized NPs cause lung inflammation, heart problems, liver dysfunction, immune suppression, organ accumulation, and altered metabolism, leading to organ-specific toxicity. NPs synthesized from plants and microbes are biologically safe and cost-effective. These microbes and plant sources can consume and accumulate inorganic metal ions from their adjacent niches, thus synthesizing extracellular and intracellular NPs. These inherent characteristics of biological cells to process and modify inorganic metal ions into NPs have helped explore an area of biochemical analysis. Biological entities or their extracts used in NPs include algae, bacteria, fungi, actinomycetes, viruses, yeasts, and plants, with varying capabilities through the bioreduction of metallic NPs. These biosynthesized NPs have a wide range of pharmaceutical applications, such as tissue engineering, detection of pathogens or proteins, antimicrobial agents, anticancer mediators, vehicles for drug delivery, formulations for functional foods, and identification of pathogens, which can contribute to translational research in medical applications. NPs have various applications in the food and drug packaging industry, agriculture, and environmental remediation.

Effective removal of azithromycin by novel g-C3N4/CdS/CuFe2O4 nanocomposite under visible light irradiation

In this study, the visible light active pristine, binary and ternary g-C₃N₄/CdS/CuFe₂O₄ nanocomposite is prepared through a coprecipitation-assisted hydrothermal technique. The characterization of the as-synthesized catalysts was conducted using various analytical techniques. When compared with pristine and binary nanocomposites, the ternary g-C₃N₄/CdS/CuFe₂O₄ nanocomposite exhibits higher photocatalytic degradation of azithromycin (AZ) under a visible light source. Ternary nanocomposite exhibits high AZ removal efficiency of about 85% within 90 min of the photocatalytic degradation experiment. Enhanced the visible light absorption ability and the suppression of photoexcited charge carriers is also achieved by forming heterojunctions between pristine materials. The ternary nanocomposite exhibited ∼2 times higher degradation efficiency than CdS/CuFe₂O₄ nanoparticles and ∼3 times higher degradation efficiency than CuFe₂O₄. The trapping experiments were conducted and it shows superoxide radicals (O₂^•-) are the predominant reactive species involved in the photocatalytic degradation reaction. This study provided a promising approach for the treatment of contaminated water using g-C₃N₄/CdS/CuFe₂O₄ as a photocatalyst.

Green synthesis of MgO nanoparticles and its antibacterial properties

Magnesium oxide nanostructured particles (NP) were prepared using a simple solution combustion technique using different leaf extracts such as Mangifera indica (Mango - Ma), Azadirachta indica (Neem-Ne), and Carica papaya (Papaya-Pa) as surfactants. The highly crystalline phase of MgO nanostructures was confirmed by PXRD and FTIR studies for 2 h 500°C calcined samples. To analyze the characteristics of obtained material-MaNP, NeNP, and PaNP for dosimetry applications, thermoluminescence (TL) studies were carried out for Co-60 gamma rays irradiated samples in the dose range 10-50 KGy; PaNP and NeNP exhibited well-defined glow curve when compared with MaNP samples. In addition, it was observed that the TL intensity decreases, with increase in gamma dose and the glow peak temperature is shifted towards the higher temperature with the increase in heating rate. The glow peak was segregated using glow curve deconvolution and thermal cleaning method. Kinetic parameters estimated using Chen's method, trap depth (E), and frequency factor (s) were found to be 0.699, 7.408, 0.4929, and 38.71, 11.008, and 10.71 for PaNP, NeNP, and MaNP respectively. The well-resolved glow curve, good linear behavior in the dose range of 10-50, KGy, and less fading were observed in PaNP as compared with MaNP and NeNP. Further, the antibacterial activity was checked against human pathogens such as Escherichia coli, Staphylococcus aureus, and Pseudomonas aeruginosa. A visible zone of clearance was observed at 200 and 100 μg/mL by the PaNP and NeNP, indicating the death of colonies by the nanoparticles. Therefore, PaNP nanomaterial is a potential phosphor material for dosimetry and antibacterial application compared to NeNP and MaNP.