A poplar plastocyanin mutant suitable for adsorption onto gold surface via disulfide bridge

Control of protein immobilization: coupling immobilization and site-directed mutagenesis to improve biocatalyst or biosensor performance

Mutagenesis and immobilization are usually considered to be unrelated techniques with potential applications to improve protein properties. However, there are several reports showing that the use of site-directed mutagenesis to improve enzyme properties directly, but also how enzymes are immobilized on a support, can be a powerful tool to improve the properties of immobilized biomolecules for use as biosensors or biocatalysts. Standard immobilizations are not fully random processes, but the protein orientation may be difficult to alter. Initially, most efforts using this idea were addressed towards controlling the orientation of the enzyme on the immobilization support, in many cases to facilitate electron transfer from the support to the enzyme in redox biosensors. Usually, Cys residues are used to directly immobilize the protein on a support that contains disulfide groups or that is made from gold. There are also some examples using His in the target areas of the protein and using supports modified with immobilized metal chelates and other tags (e.g., using immobilized antibodies). Furthermore, site-directed mutagenesis to control immobilization is useful for improving the activity, the stability and even the selectivity of the immobilized protein, for example, via site-directed rigidification of selected areas of the protein. Initially, only Cys and disulfide supports were employed, but other supports with higher potential to give multipoint covalent attachment are being employed (e.g., glyoxyl or epoxy-disulfide supports). The advances in support design and the deeper knowledge of the mechanisms of enzyme-support interactions have permitted exploration of the possibilities of the coupled use of site-directed mutagenesis and immobilization in a new way. This paper intends to review some of the advances and possibilities that these coupled strategies permit.

Nanoscopic and redox characterization of engineered horse cytochrome C chemisorbed on a bare gold electrode

In this paper, we exploit the potential offered by site-directed mutagenesis to achieve direct adsorption of horse cyt c on a bare gold electrode surface. To this issue, the side chain T102 has been replaced by a cysteine. T102 is close to the surface exposed C-terminal residue (E104), therefore the T102C mutation is expected to generate an exposed cysteine side chain able to facilitate protein binding to the electrode via the sulphur atom (analogously to what observed for yeast iso-1-cyt c). Scanning Tunnelling and Tapping Mode Atomic Force Microscopy measurements show that the T102C mutant stably adsorbs on an Au(111) surface and retains the morphological characteristics of the native form. Cyclic voltammetry reveals that the adsorbed variant is electroactive; however, the heterogeneous electron transfer with the electrode surface is slower than that observed for yeast iso-1-cyt c. We ascribe it to differences in the tertiary architecture of the two proteins, characterized by different flexibility and stability. In particular, the region where the N- and C-terminal helices get in contact (and where the mutation occurs) is analyzed in detail, since the interactions between these two helices are considered crucial for the stability of the overall protein fold.

Functional Metalloproteins Integrated with Conductive Substrates: Detecting Single Molecules and Sensing Individual Recognition Events

In the past decade, there has been significant interest in the integration of biomaterials with electronic elements: combining biological functions of biomolecules with nanotechnology offers new perspectives for implementation of ultrasensitive hybrid nanodevices. In particular, great attention has been devoted to redox metalloproteins, since they possess unique characteristics, such as electron-transfer capability, possibility of gating redox activity, and nanometric size, which make them appealing for bioelectronics applications at the nanoscale. The reliable connection of redox proteins to electrodes, aimed at ensuring good electrical contact with the conducting substrate besides preserving protein functionality, is a fundamental step for designing a hybrid nanodevice and calls for a full characterization of the immobilized proteins, possibly at the single-molecule level. Here, we describe how a multitechnique approach, based on several scanning probe microscopy techniques, may provide a comprehensive characterization of different metalloproteins on metal electrodes, disclosing unique information not only about morphological properties of the adsorbed molecules but also about the effectiveness of electrical coupling with the conductive substrate, or even concerning the preserved biorecognition capability upon adsorption. We also show how the success of an immobilization strategy, which is of primary importance for optimal integration of metalloproteins with a metal electrode, can be promptly assessed by means of the proposed approach. Besides the characterization aspect, the complementary employment of the proposed techniques deserves major potentialities for ultrasensitive detection of adsorbed biomolecules. In particular, it is shown how sensing of single metalloproteins may be optimized by monitoring the most appropriate observable. Additionally, we suggest how the combination of several experimental techniques might offer increased versatility, real-time response, and wide applicability as a detection method, once a reproducible correlation among signals coming from different single-molecule techniques is established.

Residue-specific immobilization of protein molecules by size-selected clusters

The atomic force microscope (AFM), operating in contact mode, has been employed in buffer solution to study two proteins; (i) green fluorescent protein (GFP), from the hydromedusan jellyfish Aequorea victoria; and (ii) human oncostatin M (OSM), in the presence of size-selected gold nanoclusters pinned on to a highly oriented pyrolytic graphite substrate. The AFM images have revealed immobilization of single molecules of OSM, which are strongly bound to the gold nanoclusters. Conversely, no strong immobilization has been observed for the GFP, as these molecules were easily displaced by the scanning tip. The contrasting behaviour of the two proteins can be explained by the exposed molecular surface area of their cysteine residues as modelled on the basis of their respective X-ray crystallographic data structures. GFP contains two cysteine residues, but neither is readily available to chemisorb on the gold clusters, because the cysteines are largely inaccessible from the surface of the protein. In contrast, OSM has a total of five cysteine residues, with different degrees of accessibility, which make the protein amenable to anchoring on the nanoclusters. Statistical analysis of the height of the OSM molecules bound to the nanoclusters is in accordance with crystallographic data, and suggests various configurations of the proteins on the clusters, associated with the presence of different cysteine anchoring sites. These results suggest that the three-dimensional conformation of protein molecules is preserved when they are chemisorbed to size-selected gold clusters, thus opening a new route towards oriented immobilization of individual protein molecules.

Thermal stability of wild type and disulfide bridge containing mutant of poplar plastocyanin

A comparative study of the thermal stability of wild type poplar plastocyanin and of a mutant form containing a disulfide bridge between residues 21 and 25 was performed using differential scanning calorimetry and optical spectroscopic techniques. For wild type plastocyanin the transition temperature, determined from the calorimetric profiles, is 62.7 degrees C at the scan rate of 60 degrees C/h, whereas for the mutant it is reduced to 58.0 degrees C. In both cases, the endothermic peak is followed by an exothermic one at higher temperatures. The unfolding process monitored by optical absorption at 596 nm also reveals a reduced thermal stability of the mutated plastocyanin compared to the wild type protein, with transition temperatures of 54.8 and 58.0 degrees C, respectively. For both proteins, the denaturation process was found to be irreversible and dependent on the scan rate preventing the thermodynamic analysis of the unfolding process. In parallel, small conformational changes between wild type and mutant plastocyanin emerge from fluorescence spectroscopy measurements. Here, a difference in the interaction of the two proteins between the microenvironment surrounding the fluorophores and the solvent was proposed. The destabilization observed in the disulfide containing mutant of plastocyanin suggests that the double mutation, Ile21Cys and Glu25Cys, introduces strain into the protein which offsets the stabilizing effect expected from the formation of a covalent crosslink.

Solid state protein monolayers: Morphological, conformational, and functional properties

We have studied the morphological, conformational, and electron-transfer (ET) function of the metalloprotein azurin in the solid state, by a combination of physical investigation methods, namely atomic force microscopy, intrinsic fluorescence spectroscopy, and scanning tunneling microscopy. We demonstrate that a "solid state protein film" maintains its nativelike conformation and ET function, even after removal of the aqueous solvent.

In situ STM imaging and direct electrochemistry of Pyrococcus furiosus ferredoxin assembled on thiolate-modified Au111 surfaces

We have addressed here electron transfer (ET) of Pyrococcus furiosus ferredoxin (PfFd, 7.5 kDa) in both homogeneous solution using edge plane graphite (EPG) electrodes and in the adsorbed state by electrochemistry on surface-modified single-crystal Au111 electrodes, This has been supported by surface microscopic structures of PfFd monolayers, as revealed by scanning tunneling microscopy under potential control (in situ STM). Direct ET between PfFd in phosphate buffer solution, pH 7.9, and EPG electrodes is observed in the presence of promoters. Neomycin gives rise to a pair of redox peaks with a formal potential of ca -430 mV (vs SCE), corresponding to [3Fe-4S]1+/0. The presence of an additional promoter, which can be propionic acid, alanine, or cysteine, induces a second pair of redox peaks at approximately -900 mV (vs SCE) arising from [3Fe-4S]0/1-. A robust neomycin-PfFd complex was detected by mass spectrometry. The results clearly favor an ET mechanism in which the promoting effect of small organic molecules is through formation of promoter-protein complexes. The interaction of PfFd with small organic molecules in homogeneous solution offers clues to confine the protein on the electrode surface modified by the same functional group monolayer and to address diffusionless direct electrochemistry, as well as surface microstructures of the protein monolayer. PfFd molecules were found to assemble on either mercaptopropionic acid (MPA) or cysteine-modified Au111 surfaces in stable monolayers or submonolayers. Highly ordered (2 radical 3 x 5)R30 degrees cluster structures with six MPA molecules in each cluster were found by in situ STM. Individual PfFd molecules on the MPA layer are well resolved by in situ STM. Under Ar protection reversible cyclic voltammograms were obtained on PfFd-MPA/Au111 and PfFd-cysteine/Au111 electrodes with redox potentials of -220 and -201 mV (vs SCE), respectively, corresponding to the [Fe3S4]1+/0 couple. These values are shifted positively by 200 mV relative to homogeneous solution due to interactions between the promoting layers and the protein molecules. Possible mechanisms for such interactions and their ET patterns are discussed.

Tip to substrate distances in STM imaging of biomolecules

STM images of single biomolecules adsorbed on conductive substrates do not reproduce the expected physical height, which generally appears underestimated. This may cause the tip to interfere with the soft biological sample during the imaging scans. Therefore, a key requirement to avoid invasive STM imaging is the knowledge, and the control, of the initial tip to substrate distance. This is connected to the setting of the tunnelling current and applied voltage, which define a tunnelling resistance. The height of the STM tip was measured by calibrating the tunnelling resistance, as a function of its vertical displacement until establishing a mechanical contact. At a tunnelling resistance of 4 x 10(9)Omega, distances of about 3 and 6 nm are estimated when flat Au substrates are imaged in water and in air, respectively. On such a ground, the relevance of the starting tip-substrate distance in determining a non-invasive imaging has been investigated for a plastocyanin mutant chemisorbed on Au(111) electrodes. At tunnelling distances sufficient to overcome the physical height of the imaged biomolecules, their lateral dimensions are found to be consistent with the crystallography, whereas they are significantly broadened for smaller distances.

Scanning tunneling spectroscopy investigation of self-assembled plastocyanin mutants onto gold substrates under controlled environment

The study of the electronic conduction through plastocyanin (PC) mutants assembled on a gold surface has been addressed by scanning tunneling spectroscopy. The two mutants exploit a single thiol group (PCSH) or a disulfide bridge (PCSS) to covalently bind at gold surface. The I-V measurements were performed by positioning the STM tip on top of a single molecule and sweeping the bias potential between +/-1 V, under both ambient and controlled atmosphere. For PCSS, under ambient conditions, asymmetric I-V characteristics were obtained, which disappear under nitrogen atmosphere. PCSH, instead shows a symmetric I-V relation in air and under nitrogen environment. Here, as factors underlying this distinct electron conductive behaviour, a potential role for hydration water molecules and for copper redox levels are discussed.

Excited state charge-transfer dynamics study of poplar plastocyanin by ultrafast pump-probe spectroscopy and molecular dynamics simulation

We have applied ultrafast pump-probe spectroscopy to investigate the excited state dynamics of the blue copper protein poplar plastocyanin, by exciting in the blue side of its 600-nm absorption band. The decay of the charge-transfer excited state occurs exponentially with a time constant of approximately 280 fs and is modulated by well visible oscillations. The Fourier transform of the oscillatory component, besides providing most of the vibrational modes found by conventional resonance Raman, presents additional bands in the low frequency region modes, which are reminiscent of collective motions of biological relevance. Notably, a high frequency mode at approximately 508 cm(-1), whose dynamics are consistent with that of the excited state and already observed for other blue copper proteins, is shown to be present also in poplar plastocyanin. This vibrational mode is reproduced by a molecular dynamics simulation involving the excited state of the copper site.

A Combined Atomic Force Microscopy and Molecular Dynamics Simulation Study on a Plastocyanin Mutant Chemisorbed on a Gold Surface

A mutant of copper plastocyanin, covalently bound to an Au (111) surface through an engineered disulfide bridge, was investigated in aqueous medium by atomic force microscopy (AFM) and molecular dynamics (MD) simulations. Tapping-mode AFM images revealed adsorption of single molecules which are homogeneously distributed over the substrate and strongly bound to gold and display uniform lateral size. A statistical analysis of the height of the macromolecules on the gold substrate evidenced a distribution around a mean value consistent with that expected from the crystallographic data and with a relatively large standard deviation. A 10-ns classical MD simulation of mutated plastocyanin, hydrated by a layer of water, covalently bound to a gold surface by one or two sulfur atoms, was performed. The simulations indicate that the bound protein retains, in both cases, its overall tertiary structure during the dynamic evolution. Moreover, the macro-molecule can assume different orientations with respect to the gold substrate, which give rise to a distribution of heights on the gold substrate. Experimental and MD simulation results are compared and discussed in connection with the topological and dynamical properties of the protein system.

Topological and Electron-Transfer Properties of Yeast Cytochrome c Adsorbed on Bare Gold Electrodes

The redox metalloprotein yeast cytochrome c was directly self-chemisorbed on "bare" gold electrodes through the free sulfur-containing group Cys102. Topological, spectroscopic, and electron transfer properties of the immobilised molecules were investigated by in situ scanning probe microscopy and cyclic voltammetry. Atomic force and scanning tunnelling microscopy revealed individual protein molecules adsorbed on the gold substrate, with no evidence of aggregates. The adsorbed proteins appear to be firmly bound to gold and display dimensions in good agreement with crystallographic data. Cyclic voltammetric analysis showed that up to 84% of the electrode surface is functionalised with electroactive proteins whose measured redox midpoint potential is in good agreement with the formal potential. Our results clearly indicate that this variant of cytochrome c is adsorbed on bare gold electrodes with preservation of morphological properties and redox functionality.

MD simulation of a plastocyanin mutant adsorbed onto a gold surface

MD simulation of plastocyanin, an electron transfer protein, adsorbed onto a gold surface, has been performed for 10 ns. Starting from the crystallographic structure of a poplar plastocyanin mutant engineered with the insertion of a disulfide bridge, the protein has been anchored to a gold substrate modeled by a cluster of three layers in the Au<111> configuration. A number of significant structural and dynamical properties of the protein molecule, covalently bound through either one or two sulfur atoms to the gold surface, has been extracted and compared with those of the free protein. Attention has been paid to investigate the dynamical aspects putatively related to the electron transfer process. In particular, the cross-correlation function between specific active site vibrations and all the other protein atom motions and the principal component analysis have been calculated in order to put into evidence dynamical correlation of some functional relevance. The results are discussed also in connection with related experiments.

Phytoremediation: an overview of metallic ion decontamination from soil

In recent years, phytoremediation has emerged as a promising ecoremediation technology, particularly for soil and water cleanup of large volumes of contaminated sites. The exploitation of plants to remediate soils contaminated with trace elements could provide a cheap and sustainable technology for bioremediation. Many modern tools and analytical devices have provided insight into the selection and optimization of the remediation process by plant species. This review describes certain factors for the phytoremediation of metal ion decontamination and various aspects of plant metabolism during metallic decontamination. Metal-hyperaccumulating plants, desirable for heavily polluted environments, can be developed by the introduction of novel traits into high biomass plants in a transgenic approach, which is a promising strategy for the development of effective phytoremediation technology. The genetic manipulation of a phytoremediator plant needs a number of optimization processes, including mobilization of trace elements/metal ions, their uptake into the root, stem and other viable parts of the plant and their detoxification and allocation within the plant. This upcoming science is expanding as technology continues to offer new, low-cost remediation options.

Monolayer assemblies of a de novo designed 4-alpha-helix bundle carboprotein and its sulfur anchor fragment on Au(111) surfaces addressed by voltammetry and in situ scanning tunneling microscopy

Mapping and control of proteins and oligonucleotides on metallic and nonmetallic surfaces are important in many respects. Electrochemical techniques based on single-crystal electrodes and scanning probe microscopies directly in aqueous solution (in situ SPM) have recently opened perspectives for such mapping at a resolution that approaches the single-molecule level. De novo design of model proteins has evolved in parallel and holds promise for testing and controlling protein folding and for new tailored protein structural motifs. In this report we combine these two strategies. We present a scheme for the synthesis of a new 4-alpha-helix bundle carboprotein built on a galactopyranoside derivative with a thiol anchor aglycon suitable for surface immobilization on gold. The carboprotein with thiol anchor in monomeric and dimeric (disulfide) form, the thiol anchor alone, and a sulfur-free 4-alpha-helix bundle carboprotein without thiol anchor have been prepared and investigated for comparison. Cyclic and differential pulse voltammetry (DPV) of the proteins show desorption peaks around -750 mV (SCE), whereas the thiol anchor desorption peak is at -685 mV. The peaks are by far the highest for thiol monomeric 4-alpha-helix bundle carboprotein and the thiol anchor. This pattern is supported by capacitance data. The DPV and capacitance data for the thiolated 4-alpha-helix bundle carboproteins and the thiol anchor hold a strong Faradaic reductive desorption component as supported by X-ray photoelectron spectroscopy. The desorption peak of the sulfur-free 4-alpha-helix bundle carboprotein, however, also points to a capacitive component. In situ scanning tunneling microscopy (in situ STM) of the thiol anchor discloses an adlayer with small domains and single molecules ordered in pin-striped supramolecular structures. In situ STM of thiolated 4-alpha-helix bundle carboprotein monomer shows a dense monolayer in a broad potential range on the positive side of the desorption potential. The coverage decreases close to this potential and single-molecule structures become apparent. The in situ STM contrast is also strengthened, indicative of a new redox-based tunneling mechanism. The data overall suggest that single-molecule mapping of natural and synthetic proteins on well-characterized surfaces by electrochemistry and in situ STM is within reach.

Molecular dynamics simulation and essential dynamics study of mutated plastocyanin: structural, dynamical and functional effects of a disulfide bridge insertion at the protein surface

A molecular dynamics simulation (1.1 ns) at 300 K, of fully hydrated Ile21Cys, Glu25Cys plastocyanin mutant has been performed to investigate the structural, dynamical and functional effects of a disulfide bridge insertion at the surface of the protein. A detailed analysis of the root mean square fluctuations, H-bonding pattern and dynamical cross-correlation map has been performed. An essential dynamics method has also been applied as complementary analysis to identify concerted motions (essential modes), that could be relevant to the electron transfer function. The results have been compared with those previously obtained for wild-type plastocyanin and have revealed that the mutant shows a different pattern of H-bonds, with several interactions lost and a higher flexibility, especially around the electron transfer copper site. The analysis of dynamical cross-correlation map and of essential modes, has shown that the mutant performs different functional concerted motions, which might be related to the binding recognition with its electron transfer partners in comparison with the wild-type protein.