Near-infrared spectrophotometric determination of tri- and tetrapeptides

Rapid detection of quality of Japanese fermented soy sauce using near-infrared spectroscopy

This study investigated the feasibility of rapidly evaluating the final quality of Japanese fermented soy sauce (shoyu) using NIR spectroscopy and partial least-squares (PLS) regression. In total, 110 shoyu samples that had been entered in the annual soy sauce competition from 2016 to 2018 were collected and analyzed. The transmittance spectra (400-1800 nm) and the transflectance spectra (680-2500 nm) of these samples were acquired and processed by different pre-treatments. PLS regression was applied to the raw and processed spectra to construct models based on a calibration set (76 shoyu samples from 2016 and 2017) and to evaluate these models using a validation set (34 shoyu samples from 2018), according to their values for bias and root mean square error of prediction (RMSEP). The results showed that the models constructed using the full spectra of transflectance performed better than those using transmittance spectra. Comparing the influence of different regions in the transflectance spectra enabled the accuracy of the models to be improved. The model constructed from transflectance spectra from the 1800 to 2500 nm region using pre-treatment of second derivative was superior to the other models, with a bias value of -2 and the lowest RMSEP value of 13 in the validation set. To further narrow the wavelength range, the models constructed using the spectral region from 2050 to 2400 nm also showed a better performance for predicting the sensory quality of soy sauce products. This study has demonstrated that the NIR spectroscopy technique could be used as an alternative routine quality control procedure, which can rapidly and economically classify the quality of soy sauce products.

Chitosan-cellulose composite materials: preparation, characterization and application for removal of microcystin

We developed a simple and one-step method to prepare biocompatible composites from cellulose (CEL) and chitosan (CS). [BMIm(+)Cl(-)], an ionic liquid (IL), was used as a green solvent to dissolve and prepare the [CEL+CS] composites. Since majority (>88%) of IL used was recovered for reuse by distilling the aqueous washings of [CEL+CS], the method is recyclable. XRD, FTIR, NIR, (13)C CP-MAS-NMR and SEM were used to monitor the dissolution and to characterize the composites. The composite was found to have combined advantages of their components: superior mechanical strength (from CEL) and excellent adsorption capability for microcystin-LR, a deadly toxin produced by cyanobacteria (from CS). Specifically, the mechanical strength of the composites increased with CEL loading; e.g., up to 5× increase in tensile strength was achieved by adding 80% of CEL into CS. Kinetic results of adsorption confirm that unique properties of CS remain intact in the composite, i.e., it is not only a very good adsorbent for microcystin but also is better than all other available adsorbents. For example, it can adsorb 4× times more microcystin than the best reported adsorbent. Importantly, the microcystin adsorbed can be quantitatively desorbed to enable the composite to be reused with similar adsorption efficiency.

Facile synthesis, characterization, and antimicrobial activity of cellulose-chitosan-hydroxyapatite composite material: a potential material for bone tissue engineering

Hydroxyapatite (HAp) is often used as a bone-implant material because it is biocompatible and osteoconductive. However, HAp possesses poor rheological properties and it is inactive against disease-causing microbes. To improve these properties, we developed a green method to synthesize multifunctional composites containing: (1) cellulose (CEL) to impart mechanical strength; (2) chitosan (CS) to induce antibacterial activity thereby maintaining a microbe-free wound site; and (3) HAp. In this method, CS and CEL were co-dissolved in an ionic liquid (IL) and then regenerated from water. HAp was subsequently formed in situ by alternately soaking [CEL+CS] composites in aqueous solutions of CaCl2 and Na2 HPO4 . At least 88% of IL used was recovered for reuse by distilling the aqueous washings of [CEL+CS]. The composites were characterized using FTIR, XRD, and SEM. These composites retained the desirable properties of their constituents. For example, the tensile strength of the composites was enhanced 1.9 times by increasing CEL loading from 20% to 80%. Incorporating CS in the composites resulted in composites which inhibited the growth of both Gram positive (MRSA, S. aureus and VRE) and Gram negative (E. coli and P. aeruginosa) bacteria. These findings highlight the potential use of [CEL+CS+HAp] composites as scaffolds in bone tissue engineering.

Recyclable synthesis, characterization, and antimicrobial activity of chitosan-based polysaccharide composite materials

We have successfully developed a simple and totally recyclable method to synthesize novel, biocompatible, and biodegradable composite materials from cellulose (CEL) and chitosan (CS). In this method, [BMIm(+) Cl(-) ], an ionic liquid (IL), was used as a green solvent to dissolve and synthesize the [CEL+CS] composites. Since, the IL can be removed from the composites by washing them with water, and recovered by distilling the washed solution, the method is totally recyclable. Spectroscopic and imaging techniques including XRD, FTIR, NIR, and SEM were used to monitor the dissolution, to characterize and to confirm that CEL and CS were successfully regenerated. More importantly, we have successfully demonstrated that [CEL+CS] composite is particularly suited for many applications including antimicrobial property. This is because the composites have combined advantages of their components, namely superior chemical and mechanical stability (from CEL) and bactericide (from CS). Results of tensile strength measurements clearly indicate that adding CEL into CS substantially increase its tensile strength. Up to 5× increase in tensile strength can be achieved by adding 80% of CEL into CS. Results of in vitro antibacterial assays confirm that CS retains its antibacterial property in the composite. More importantly, the composites reported here can inhibit growth of wider range of bacteria than other CS-based materials prepared by conventional methods; that is over 24 h period, the composites substantially inhibited growth of bacteria such as MRSA, VRE, S. aureus, E. coli. These are bacteria that are often found to have the highest morbidity and mortality associated with wound infections.

Near infrared spectroscopy, cluster and multivariate analysis hyphenated to thin layer chromatography for the analysis of amino acids

A method based on near-infrared spectroscopy (NIRS) was developed for the rapid and non-destructive determination and quantification of solid and dissolved amino acids. The statistical results obtained after optimisation of measurement conditions were evaluated on the basis of statistical parameters, Q-value (quality of calibrations), R(2), standard error of estimation (SEE), standard error of prediction (SEP), BIAS applying cluster and different multivariate analytical procedures. Experimental optimisation comprised the selection of the highest suitable optical thin-layer (0.5, 1.0, 1.5, 2.0, 2.5, 3.0 mm), sample temperature (10-30 degrees C), measurement option (light fibre, 0.5 mm optical thin-layer; boiling point tube; different types of cuvettes) and sample concentration in the range between 100 and 500 ppm. Applying the optimised conditions and a 115-QS Suprasil cuvette (V = 400 microl), the established qualitative model enabled to distinguish between different dissolved amino acids with a Q-value of 0.9555. Solid amino acids were investigated in the transflectance mode, allowing to differentiate them with a Q-value of 0.9155. For the qualitative and quantitative analysis of amino acids in complex matrices NIRS was established as a detection system directly onto the plate after prior separation on cellulose based thin-layer chromatography (TLC) sheets employing n-butanol, acetic acid and distilled water at a ratio of 8:4:2 (v/v/v) as an optimised mobile phase. Due to the prior separation step, the established calibration curve was found to be more stable than the one calculated from the dissolved amino acids. The found lower limit of detection was 0.01 mg/ml. Finally, this optimised TLC-NIRS method was successfully applied for the qualitative and quantitative analysis of L-lysine in apple juice. NIRS is shown not only to offer a fast, non-destructive detection tool but also to provide an easy-to-use alternative to more complicated detection methods such as mass spectrometry (MS) for qualitative and quantitative TLC analysis of amino acids in crude samples.

Near-infrared spectrophotometric determination of compositions of fullerene samples

A novel method has been developed for the sensitive and accurate determination of compositions of fullerene samples. The method is based on the synergistic use of spectrophotometric measurements and partial least square method. The method is not only simple, inexpensive and fast but also is non-destructive. Compositions of various fullerene samples including fullerite which is the precursor to C(60) and C(70), can be directly and non-destructively determined by this method without any time-consuming separation step as in the HPLC method or destruction as in the MS method.

Determination of enantiomeric compositions of pharmaceutical products by near-infrared spectrometry

A new method for the determination of enantiomeric compositions of a variety of drugs including propranolol, atenolol, and ibuprofen has been developed. The method is based on the use of the near-infrared technique to measure diastereomeric interactions between an added carbohydrate compound and both enantiomeric forms of a drug followed by evaluation of the data by partial least square analysis. The fact that the method works well with all three macrocyclic carbohydrates with different cavity sizes (i.e., alpha-, beta-, and gamma-cyclodextrin) and with sucrose, which is a linear carbohydrate, clearly demonstrates that it is not necessary to have inclusion complex formation to produce effective diastereomeric interactions. Rather a simple adsorption of the drug onto a carbohydrate is sufficient. Since inclusion complex formation is not a requisite, this method is not limited to the three drugs evaluated in this study but is rather universal as it can, in principle, be used for the sensitive and accurate determination of enantiomeric compositions of many different types of drugs with only about 1.5mg/mL concentration and enantiomeric excess as low as 0.80%, in water or in a mixture of water with organic solvent. Furthermore, it does not rely on the use of rather expensive carbohydrates such as cyclodextrins but is equally as effective even with a simple and inexpensive carbohydrate such as sucrose.

Absorption of water by room-temperature ionic liquids: effect of anions on concentration and state of water

Near-infrared (NIR) spectrometry was successfully used for the non-invasive and in situ determination of concentrations and structure of water absorbed by room-temperature ionic liquids (RTILs). It was found that RTILs based on 1-butyl-3-methylimidazolium, namely, [BuMIm]+ [BF4]-, [BuMIm]+ [bis((trifluoromethyl)sulfonyl)amide, or Tf2N]- and [BuMIm]+ [PF6]-, are hydroscopic and can quickly absorb water when they are exposed to air. Absorbed water interacts with the anions of the RTILs, and these interactions lead to changes in the structure of water. Among the RTILs studied, [BF4]- provides the strongest interactions and [PF6]- the weakest. In 24 hours, [Bu-MIm]+ [BF4]- can absorb up to 0.320 M of water, whereas [Bu-MIm]+ [PF6]- can only absorb 8.3 x 10(-2) M of water. It seems that higher amounts of water can be absorbed when the anion of the RTIL can strongly interact and hence stabilize absorbed water molecules by forming hydrogen bonds with them or inducing hydrogen bonds among water molecules. More importantly, the NIR technique can be sensitively used for the noninvasive, in situ determination of absorbed water in RTILs, without any pretreatment, and at limits of detection as low as 3.20 x 10(-3) M.