Development of an Internally Quenched Fluorescent Substrate and a Continuous Fluorimetric Assay for Streptococcus pneumoniae Signal Peptidase I

Design, synthesis and in vitro biological evaluation of oligopeptides targeting E. coli type I signal peptidase (LepB)

Type I signal peptidases are potential targets for the development of new antibacterial agents. Here we report finding potent inhibitors of E. coli type I signal peptidase (LepB), by optimizing a previously reported hit compound, decanoyl-PTANA-CHO, through modifications at the N- and C-termini. Good improvements of inhibitory potency were obtained, with IC₅₀s in the low nanomolar range. The best inhibitors also showed good antimicrobial activity, with MICs in the low μg/mL range for several bacterial species. The selection of resistant mutants provided strong support for LepB as the target of these compounds. The cytotoxicity and hemolytic profiles of these compounds are not optimal but the finding that minor structural changes cause the large effects on these properties suggests that there is potential for optimization in future studies.

Antibiotic targeting of the bacterial secretory pathway

Finding new, effective antibiotics is a challenging research area driven by novel approaches required to tackle unconventional targets. In this review we focus on the bacterial protein secretion pathway as a target for eliminating or disarming pathogens. We discuss the latest developments in targeting the Sec-pathway for novel antibiotics focusing on two key components: SecA, the ATP-driven motor protein responsible for driving preproteins across the cytoplasmic membrane and the Type I signal peptidase that is responsible for the removal of the signal peptide allowing the release of the mature protein from the membrane. We take a bird's-eye view of other potential targets in the Sec-pathway as well as other Sec-dependent or Sec-independent protein secretion pathways as targets for the development of novel antibiotics. This article is part of a Special Issue entitled: Protein trafficking and secretion in bacteria. Guest Editors: Anastassios Economou and Ross Dalbey.

Bacterial type I signal peptidases as antibiotic targets

Despite an alarming increase in morbidity and mortality caused by multidrug-resistant bacteria, the number of antibiotics available to efficiently combat them is dwindling. Consequently, there is a pressing need for new drugs, preferably with novel modes of action to avert the problem of cross-resistance. Several new targets have been proposed, including proteins essential in the protein secretion pathway such as the type I signal peptidase (SPase), indispensable for the release of the signal peptide during secretion of Sec- and Tat-dependent proteins. The type I SPase is considered to be an attractive target because it is essential, substantially different from the eukaryotic counterpart, and its active site is located at the outer leaflet of the cytoplasmic membrane, permitting relatively easy access to potential inhibitors. A few SPase inhibitors have already been identified, but their suitability as drugs is yet to be confirmed. An overview is given on the currently known SPase inhibitors, how they can give valuable information on the structural, biochemical and target validation aspects of the SPases, the approaches to identify them, and their future potential as drugs.

Activatable Optical Probes for the Detection of Enzymes

The early detection of many human diseases is crucial if they are to be treated successfully. Therefore, the development of imaging techniques that can facilitate early detection of disease is of high importance. Changes in the levels of enzyme expression are known to occur in many diseases, making their accurate detection at low concentrations an area of considerable active research. Activatable fluorescent probes show immense promise in this area. If properly designed they should exhibit no signal until they interact with their target enzyme, reducing the level of background fluorescence and potentially endowing them with greater sensitivity. The mechanisms of fluorescence changes in activatable probes vary. This review aims to survey the field of activatable probes, focusing on their mechanisms of action as well as illustrating some of the in vitro and in vivo settings in which they have been employed.

An easy and fast method for the evaluation of Staphylococcus epidermidis type I signal peptidase inhibitors

In the framework of the search for new antimicrobial therapies to combat resistant bacteria, the type I signal peptidase (SPase I) serves as a potentially interesting target for the development of antibacterials with a new mode of action. Bacterial SPases I play a key role in protein secretion as they are responsible for the cleavage of signal peptides from secreted proteins. For the Gram-positive Staphylococcus epidermidis, an important source of biofilm-associated infections, three putative SPases I (denoted Sip1, Sip2, Sip3) have been described, of which Sip1 lacks the catalytic lysine. Here, we report the in vitro activity of purified Sip2 and Sip3 using pre-SceD as a native preprotein substrate of S. epidermidis and in a FRET-based assay. For the latter, a novel internally quenched fluorescent peptide substrate based on the signal peptide sequence of this native preprotein was developed and specific cleavage of this synthetic fluorogenic peptide substrate was demonstrated. The latter in vitro assay represents a rapid and reliable tool in future research for the identification and validation of potential SPase I inhibitors.

Type I signal peptidases of Gram-positive bacteria

Proteins that are exported from the cytoplasm to the periplasm and outer membrane of Gram-negative bacteria, or the cell wall and growth medium of Gram-positive bacteria, are generally synthesized as precursors with a cleavable signal peptide. During or shortly after pre-protein translocation across the cytoplasmic membrane, the signal peptide is removed by signal peptidases. Importantly, pre-protein processing by signal peptidases is essential for bacterial growth and viability. This review is focused on the signal peptidases of Gram-positive bacteria, Bacillus and Streptomyces species in particular. Evolutionary concepts, current knowledge of the catalytic mechanism, substrate specificity requirements and structural aspects are addressed. As major insights in signal peptidase function and structure have been obtained from studies on the signal peptidase LepB of Escherichia coli, similarities and differences between this enzyme and known Gram-positive signal peptidases are highlighted. Notably, while the incentive for previous research on Gram-positive signal peptidases was largely based on their role in the biotechnologically important process of protein secretion, present-day interest in these essential enzymes is primarily derived from the idea that they may serve as targets for novel anti-microbials.

Novel lipoglycopeptides as inhibitors of bacterial signal peptidase I

Signal peptidase (SPase) I is responsible for the cleavage of signal peptides of many secreted proteins in bacteria. Because of its unique physiological and biochemical properties, it serves as a potential target for development of novel antibacterial agents. In this study, we report the production, isolation, and structure determination of a family of structurally related novel lipoglycopeptides from a Streptomyces sp. as inhibitors of SPase I. Detailed spectroscopic analyses, including MS and NMR, revealed that these lipoglycopeptides share a common 14-membered cyclic peptide core, an acyclic tripeptide chain, and a deoxy-alpha-mannose sugar, but differ in the degree of oxidation of the N-methylphenylglycine residue and the length and branching of the fatty acyl chain. Biochemical analysis demonstrated that these peptides are potent and competitive inhibitors of SPase I with K(i) 50 to 158 nm. In addition, they showed modest antibacterial activity against a panel of pathogenic Gram-positive and Gram-negative bacteria with minimal inhibitory concentration of 8-64 microm against Streptococcus pneumonniae and 4-8 microm against Escherichia coli. Notably, they mechanistically blocked the protein secretion in whole cells as demonstrated by inhibiting beta-lactamase release from Staphylococcus aureus. Taken together, the present discovery of a family of novel lipoglycopeptides as potent inhibitors of bacterial SPase I may lead to the development of a novel class of broad-spectrum antibiotics.

Development of intramolecularly quenched fluorescent peptides as substrates of angiotensin-converting enzyme 2

Angiotensin-converting enzyme 2 (ACE2 or ACEH) is a novel angiotensin-converting enzyme-related carboxypeptidase that cleaves a single amino acid from angiotensin I, des-Arg bradykinin, and many other bioactive peptides. Using des-Arg bradykinin as a template, we designed a series of intramolecularly quenched fluorogenic peptide substrates for ACE2. The general structure of the substrates was F-X-Q, in which F was the fluorescent group, Abz, Q was the quenching group (either Phe(NO(2)) or Tyr(NO(2))), and X was the intervening peptide. These substrates were selectively cleaved by recombinant human ACE2, as shown by MS and HPLC. Quenching efficiency increased as the peptide sequence was shortened from 8 to 3 aa, and also when Tyr(NO(2)) was used as a quenching group instead of Phe(NO(2)). Two of the optimized substrates, TBC5180 and TBC5182, produced a signal:noise ratio of better than 20 when hydrolyzed by ACE2. Kinetic measurements with ACE2 were as follows: TBC5180, K(m)=58 microM and k(cat)/K(m)=1.3x10(5)M(-1)s(-1); TBC5182, K(m)=23 microM and k(cat)/K(m)=3.5 x 10(4)M(-1)s(-1). Thus, based on hydrolysis rate, TBC5180 was a better substrate than TBC5182. However, TBC5180 was also hydrolyzed by ACE, whereas TBC5182 was not cleaved, suggesting that TBC5182 was a selective for ACE2. We conclude that these two peptides can be used as fluorescent substrates for high-throughput screening for selective inhibitors of ACE2 enzyme.

In vitro and in vivo self-cleavage of Streptococcus pneumoniae signal peptidase I

We have previously demonstrated that Streptococcus pneumoniae signal peptidase (SPase) I catalyzes a self-cleavage to result in a truncated product, SPase37-204 [Peng, S.B., Wang, L., Moomaw, J., Peery, R.B., Sun, P.M., Johnson, R.B., Lu, J., Treadway, P., Skatrud, P.L. & Wang, Q.M. (2001) J. Bacteriol.183, 621-627]. In this study, we investigated the effect of phospholipid on invitro self-cleavage of S. pneumoniae SPase I. In the presence of phospholipid, the self-cleavage predominantly occurred at one cleavage site between Gly36-His37, whereas the self-cleavage occurred at multiple sites in the absence of phospholipid, and two additional self-cleavage sites, Ala65-His66 and Ala143-Phe144, were identified. All three self-cleavage sites strongly resemble the signal peptide cleavage site and follow the (-1, -3) rule for SPase I recognition. Kinetic analysis demonstrated that self-cleavage is a concentration dependent and intermolecular event, and the activity in the presence of phospholipid is 25-fold higher than that in the absence of phospholipid. Biochemical analysis demonstrated that SPase37-204, the major product of the self-cleavage totally lost activity to cleave its substrates, indicating that the self-cleavage resulted in the inactivation of the enzyme. More importantly, the self-cleavage was demonstrated to be happening in vivo in all the growth phases of S. pneumoniae cells. The bacterial cells keep the active SPase I at the highest level in exponential growth phase, suggesting that the self-cleavage may play an important role in regulating the activity of the enzyme under different conditions.

Physical requirements for in vitro processing of the Streptomyces lividans signal peptidases

The Gram-positive eubacterium Streptomyces lividans contains four chromosomally encoded type I signal peptidases, SipW, SipX, SipY and SipZ, of which all but SipW have an unusual C-terminal membrane anchor. For in vitro characterisation of these signal peptidases, the S. lividans sip genes were expressed in Escherichia coli and the corresponding proteins were purified. The four enzymes had an optimum activity at an alkaline pH, notably pH 8-9 for SipW and SipY and pH 10-11 for SipX and SipZ. In contrast to SipW, the in vitro activities of SipX, SipY and SipZ significantly increased in the presence of detergent. Since none of the S. lividans Sip proteins contains the hydrophobic beta-barrel domain, which in E. coli LepB was proven to be requisite for detergent-dependent in vitro activity, we assume that for detergent dependence, the C-terminal transmembrane anchor can partly substitute for this domain. Finally, all Sip proteins were stimulated by added phospholipids, which strongly suggests that phospholipids play an important role in the catalytic mechanism.