Subtle differences in dissociation rates of interactions between destabilized human carbonic anhydrase II mutants and immobilized benzenesulfonamide inhibitors probed by a surface plasmon resonance biosensor

Improvement of solid material for affinity resins by application of long PEG spacers to capture the whole target complex of FK506

Solid materials for affinity resins bearing long PEG spacers between a functional group used for immobilization of a bio-active compound and the solid surface were synthesized to capture not only small target proteins but also large and/or complex target proteins. Solid materials with PEG1000 or PEG2000 as spacers, which bear a benzenesulfonamide derivative, exhibited excellent selectivity between the specific binding protein carbonic anhydrase type II (CAII) and non-specific ones. These materials also exhibited efficacy in capturing a particular target at a maximal amount. Affinity resins using solid materials with PEG1000 or PEG2000 spacers, bear a FK506 derivative, successfully captured the whole target complex of specific binding proteins at the silver staining level, while all previously known affinity resins with solid materials failed to achieve this objective. These novel affinity resins captured other specific binding proteins such as dynamin and neurocalcin δ as well.

Label-free characterization of carbonic anhydrase-novel inhibitor interactions using surface plasmon resonance, isothermal titration calorimetry and fluorescence-based thermal shift assays

This work describes the development of biophysical unbiased methods to study the interactions between new designed compounds and carbonic anhydrase II (CAII) enzyme. These methods have to permit both a screening of a series of sulfonamide derivatives and the identification of a lead compound after a thorough study of the most promising molecules. Interactions data were collected using surface plasmon resonance (SPR) and thermal shift assay (TSA). In the first step, experiments were performed with bovine CAII isoform and were extended to human CAII. Isothermal titration calorimetry (ITC) experiments were also conducted to obtain thermodynamics parameters necessary for the processing of the TSA data. Results obtained with this reference methodology demonstrate the effectiveness of SPR and TSA. KD values obtained from SPR data were in perfect accordance with ITC. For TSA, despite the fact that the absolute values of KD were quite different, the same affinity scale was obtained for all compounds. The binding affinities of the analytes studied vary by more than 50 orders of magnitude; for example, the KD value determined by SPR were 6 ± 4 and 299 ± 25 nM for compounds 1 and 3, respectively. This paper discusses some of the theoretical and experimental aspects of the affinity-based methods and evaluates the protein consumption to develop methods for the screening of further new compounds. The double interest of SPR, that is, for screening and for the quick thorough study of the interactions parameters (ka , kd , and KD ), leads us to choose this methodology for the study of new potential inhibitors.

Algorithms and semantic infrastructure for mutation impact extraction and grounding

Background

Mutation impact extraction is a hitherto unaccomplished task in state of the art mutation extraction systems. Protein mutations and their impacts on protein properties are hidden in scientific literature, making them poorly accessible for protein engineers and inaccessible for phenotype-prediction systems that currently depend on manually curated genomic variation databases.

Results

We present the first rule-based approach for the extraction of mutation impacts on protein properties, categorizing their directionality as positive, negative or neutral. Furthermore protein and mutation mentions are grounded to their respective UniProtKB IDs and selected protein properties, namely protein functions to concepts found in the Gene Ontology. The extracted entities are populated to an OWL-DL Mutation Impact ontology facilitating complex querying for mutation impacts using SPARQL. We illustrate retrieval of proteins and mutant sequences for a given direction of impact on specific protein properties. Moreover we provide programmatic access to the data through semantic web services using the SADI (Semantic Automated Discovery and Integration) framework.

Conclusion

We address the problem of access to legacy mutation data in unstructured form through the creation of novel mutation impact extraction methods which are evaluated on a corpus of full-text articles on haloalkane dehalogenases, tagged by domain experts. Our approaches show state of the art levels of precision and recall for Mutation Grounding and respectable level of precision but lower recall for the task of Mutant-Impact relation extraction. The system is deployed using text mining and semantic web technologies with the goal of publishing to a broad spectrum of consumers.

Colorimetric protein sensing by controlled assembly of gold nanoparticles functionalized with synthetic receptors

A novel strategy is described for the colorimetric sensing of proteins, based on polypeptide-functionalized gold nanoparticles. Recognition is accomplished using a polypeptide sensor scaffold designed to specifically bind to the model analyte, human carbonic anhydrase II (HCAII). The extent of particle aggregation, induced by the Zn(2+)-triggered dimerization and folding of a second polypeptide also present on the surface of the gold nanoparticle, gives a readily detectable colorimetric shift that is dependent on the concentration of the target protein. In the absence of HCAII, particle aggregation results in a major redshift of the plasmon peak, whereas analyte binding prevented the formation of dense aggregates, significantly reducing the magnitude of the redshift. The versatility of the technique is demonstrated using a second model system based on the recognition of a peptide sequence from the tobacco mosaic virus coat protein (TMVP) by a recombinant antibody fragment (Fab57P). Concentrations down to approximately 10 nM and approximately 25 nM are detected for HCAII and Fab57P, respectively. This strategy is proposed as a generic platform for robust and specific protein analysis that can be further developed to monitor a wide range of target proteins.

Biophysical and biochemical approach to locating an inhibitor binding site on cholesteryl ester transfer protein

Cholesteryl ester transfer protein (CETP) transfers neutral lipids between different types of plasma lipoprotein. Inhibitors of CETP elevate the fraction of plasma cholesterol associated with high-density lipoproteins and are being developed as new agents for the prevention and treatment of cardiovascular disease. The molecular basis of their function is not yet fully understood. To aid in the study of inhibitor interactions with CETP, a torcetrapib-related compound was coupled to different biotin-terminated spacer groups, and the binding of CETP to the streptavidin-bound conjugates was monitored on agarose beads and in a surface plasmon resonance biosensor. CETP binding was poor with a 2.0 nm spacer arm, but efficient with polyethyleneglycol spacers of 3.5 or 4.6 nm. The conjugate based on a 4.6 nm spacer was used for further biosensor experiments. Soluble inhibitor blocked the binding of CETP to the immobilized drug, as did preincubation with a disulfide-containing covalent inhibitor. To provide a first estimate of the binding site for torcetrapib-like inhibitors, CETP was modified with a disulfide-containing agent that modifies Cys-13 of CETP. Mass spectrometry of the modified protein indicated that a single half-molecule of the disulfide was covalently bound to CETP, and peptide mapping after digestion with pepsin confirmed previous reports based on mutagenesis that Cys-13 was the site of modification. Modified CETP was unable to bind to the biosensor-mounted torcetrapib analog, indicating that the binding site on CETP for torcetrapib is in the lipid-binding pocket near the N-terminus of the protein. The crystal structure of CETP shows that the sulfhydryl group of Cys-13 resides at the bottom of this pocket.

Reduction of nonspecific binding proteins to self-assembled monolayer on gold surface

We developed a gold coated glass chip bearing a poly(ethyleneglycol) (PEG) type compound as hydrophilic spacer for surface plasmon resonance studies, which enabled adequate estimation of K(d) value between FK506 and FKBP12 not only using purified FKBP12 (K(d)=22 nM) but also using Escherichia coli lysate expressing FKBP12 (K(d)=15 nM). These results indicated effectiveness of the PEG spacer for reduction of nonspecific interactions. Chemical stability and simple surface-structure of the novel chip are also attractive.

Design of amino acid sulfonamides as transition-state analogue inhibitors of arginase

Arginase is a binuclear manganese metalloenzyme that catalyzes the hydrolysis of L-arginine to form L-ornithine plus urea. Chiral L-amino acids bearing sulfonamide side chains have been synthesized in which the tetrahedral sulfonamide groups are designed to target bridging coordination interactions with the binuclear manganese cluster in the arginase active site. Syntheses of the amino acid sulfonamides have been accomplished by the amination of sulfonyl halide derivatives of (S)-(tert-butoxy)-[(tert-butoxycarbonyl)amino]oxoalkanoic acids. Amino acid sulfonamides with side chains comparable in length to that of L-arginine exhibit inhibition in the micromolar range, and the X-ray crystal structure of arginase I complexed with one of these inhibitors, S-(2-sulfonamidoethyl)-L-cysteine, has been determined at 2.8 A resolution. In the enzyme-inhibitor complex, the sulfonamide group displaces the metal-bridging hydroxide ion of the native enzyme and bridges the binuclear manganese cluster with an ionized NH(-) group. The binding mode of the sulfonamide inhibitor may mimic the binding of the tetrahedral intermediate and its flanking transition states in catalysis. It is notable that the ionized sulfonamide group is an excellent bridging ligand in this enzyme-inhibitor complex; accordingly, the sulfonamide functionality can be considered in the design of inhibitors targeting other binuclear metalloenzymes.

Survey of the year 2001 commercial optical biosensor literature

We have assembled references of 700 articles published in 2001 that describe work performed using commercially available optical biosensors. To illustrate the technology's diversity, the citation list is divided into reviews, methods and specific applications, as well as instrument type. We noted marked improvements in the utilization of biosensors and the presentation of kinetic data over previous years. These advances reflect a maturing of the technology, which has become a standard method for characterizing biomolecular interactions.