Structure and conversion kinetics of a bi-stable DNA i-motif: broken symmetry in the [d(5mCCTCC)]4 tetramer

Cascaded, Feedback-Driven, and Spatially Localized Emergence of Constitutional Dynamic Networks Driven by Enzyme-Free Catalytic DNA Circuits

The enzyme-free catalytic hairpin assembly (CHA) process is introduced as a functional reaction module for guided, high-throughput, emergence, and evolution of constitutional dynamic networks, CDNs, from a set of nucleic acids. The process is applied to assemble networks of variable complexities, functionalities, and spatial confinement, and the systems provide possible mechanistic pathways for the evolution of dynamic networks under prebiotic conditions. Subjecting a set of four or six structurally engineered hairpins to a promoter P₁ leads to the CHA-guided emergence of a [2 × 2] CDN or the evolution of a [3 × 3] CDN, respectively. Reacting of a set of branched three-arm DNA-hairpin-functionalized junctions to the promoter strand activates the CHA-induced emergence of a three-dimensional (3D) CDN framework emulating native gene regulatory networks. In addition, activation of a two-layer CHA cascade circuit or a cross-catalytic CHA circuit and cascaded driving feedback-driven evolution of CDNs are demonstrated. Also, subjecting a four-hairpin-modified DNA tetrahedron nanostructure to an auxiliary promoter strand simulates the evolution of a dynamically equilibrated DNA tetrahedron-based CDN that undergoes secondary fueled dynamic reconfiguration. Finally, the effective permeation of DNA tetrahedron structures into cells is utilized to integrate the four-hairpin-functionalized tetrahedron reaction module into cells. The spatially localized miRNA-triggered CHA evolution and reconfiguration of CDNs allowed the logic-gated imaging of intracellular RNAs. Beyond the bioanalytical applications of the systems, the study introduces possible mechanistic pathways for the evolution of functional networks under prebiotic conditions.

Selectively Identifying Exposed-over-Unexposed C-C+ Pairs in Human Telomeric i-Motif Structures with Length-Dependent Polymorphism

The i-motif structure (iM) has attracted much attention, because of its in vivo bioactivity and wide in vitro applications such as DNA-based switches. Herein, the length-dependent folding of cytosine-rich repeats of the human telomeric 5'-(CCCTAA)_n-1CCC-3' (iM-n, where n = 2-8) was fully explored. We found that iM-4, iM-5, and iM-8 mainly form the intramolecular monomer iM structures, while a tetramolecular structure populates only for iM-3. However, iM-6 and iM-7 have the potential to fold as well into the dimeric iM structures besides the monomer ones. The natural hypericin (Hyp) was used as the polymorphism-selective probe to recognize the iM structures. Interestingly, only iM-3, iM-6, and iM-7 can efficiently switch on the Hyp fluorescence by specifically binding with the outmost C-C⁺ base pairs that are exposed directly to solution. However, other iM structures that fold in a way with a coverage of the outmost C-C⁺ pairs by loop sequences are totally unavailable for the Hyp binding. Theoretical modeling indicates that adaptive π-π and cation-π interactions contribute to the Hyp recognition toward the exposed C-C⁺ pairs. This specific iM recognition can be boosted by a photocatalytic DNAzyme construct. Our work provides a reliable fluorescence method to selectively explore the polymorphism of iM structures.

Switchable and dynamic G-quadruplexes and their applications

G-Quadruplexes attract growing interest as functional constituents in biology, chemistry, nanotechnology, and material science. In particular, the reversible dynamic reconfiguration of G-quadruplexes provides versatile means to switch DNA nanostructures, reversibly control catalytic functions of DNA assemblies, and switch material properties and functions. The present review article discusses the switchable dynamic reconfiguration of G-quadruplexes as central functional and structural motifs that enable diverse applications in DNA nanotechnology and material science. The dynamic reconfiguration of G-quadruplexes has a major impact on the development of DNA switches and DNA machines. The integration of G-quadruplexes with enzymes yields supramolecular assemblies exhibiting switchable catalytic functions guided by dynamic G-quadruplex topologies. In addition, G-quadruplexes act as important building blocks to operate constitutional dynamic networks and transient dissipative networks mimicking complex biological dynamic circuitries. Furthermore, the integration of G-quadruplexes with DNA nanostructures, such as origami tiles, introduces dynamic and mechanical features into these static frameworks. Beyond the dynamic operation of G-quadruplex structures in solution, the assembly of G-quadruplexes on bulk surfaces such as electrodes or nanoparticles provides versatile means to engineer diverse electrochemical and photoelectrochemical devices and to switch the dynamic aggregation/deaggregation of nanoparticles, leading to nanoparticle assemblies that reveal switchable optical properties. Finally, the functionalization of hydrogels, hydrogel microcapsules, or nanoparticle carriers, such as SiO₂ nanoparticles or metal-organic framework nanoparticles, yields stimuli-responsive materials exhibiting shape-memory, self-healing, and controlled drug release properties. Indeed, G-quadruplex-modified nanomaterials find growing interest in the area of nanomedicine. Beyond the impressive G-quadruplex-based scientific advances achieved to date, exciting future developments are still anticipated. The review addresses these goals by identifying the potential opportunities and challenges ahead of the field in the coming years.

Recent Advances in Stimuli-Responsive DNA-Based Hydrogels

Stimuli-responsive DNA-based hydrogels are attracting growing interest because of their smart responsiveness, excellent biocompatibility, regulated biodegradability, and programmable design properties. Integration of reconfigurable DNA architectures and switchable supramolecular moieties (as cross-linkers) in hydrogels by responding to external stimuli provides an ideal approach for the reversible tuning structural and mechanical properties of the hydrogels, which can be exploited in the development of intelligent DNA-based materials. This review highlights recent advances in the design of responsive pure DNA hydrogels, DNA-polymer hybrid hydrogels, and autonomous DNA-based hydrogels with transient behaviors. A variety of chemically and physically triggered DNA-based stimuli-responsive hydrogels and their versatile applications in biosensing, biocatalysis, cell culture and separation, drug delivery, shape memory, self-healing, and robotic actuators are summarized. Finally, we address the key challenges that the field will face in the coming years, and future prospects are identified.

Photoresponsive DNA materials and their applications

Photoresponsive nucleic acids attract growing interest as functional constituents in materials science. Integration of photoisomerizable units into DNA strands provides an ideal handle for the reversible reconfiguration of nucleic acid architectures by light irradiation, triggering changes in the chemical and structural properties of the nanostructures that can be exploited in the development of photoresponsive functional devices such as machines, origami structures and ion channels, as well as environmentally adaptable 'smart' materials including nanoparticle aggregates and hydrogels. Moreover, photoresponsive DNA components allow control over the composition of dynamic supramolecular ensembles that mimic native networks. Beyond this, the modification of nucleic acids with photosensitizer functionality enables these biopolymers to act as scaffolds for spatial organization of electron transfer reactions mimicking natural photosynthesis. This review provides a comprehensive overview of these exciting developments in the design of photoresponsive DNA materials, and showcases a range of applications in catalysis, sensing and drug delivery/release. The key challenges facing the development of the field in the coming years are addressed, and exciting emergent research directions are identified.

Stimuli-Responsive Biomolecule-Based Hydrogels and Their Applications

This Review presents polysaccharides, oligosaccharides, nucleic acids, peptides, and proteins as functional stimuli-responsive polymer scaffolds that yield hydrogels with controlled stiffness. Different physical or chemical triggers can be used to structurally reconfigure the crosslinking units and control the stiffness of the hydrogels. The integration of stimuli-responsive supramolecular complexes and stimuli-responsive biomolecular units as crosslinkers leads to hybrid hydrogels undergoing reversible triggered transitions across different stiffness states. Different applications of stimuli-responsive biomolecule-based hydrogels are discussed. The assembly of stimuli-responsive biomolecule-based hydrogel films on surfaces and their applications are discussed. The coating of drug-loaded nanoparticles with stimuli-responsive hydrogels for controlled drug release is also presented.

Modelling Photosynthesis with ZnII -Protoporphyrin All-DNA G-Quadruplex/Aptamer Scaffolds

All-DNA scaffolds act as templates for the organization of photosystem I model systems. A series of DNA templates composed of Zn^II -protoporphyrin IX (Zn^II PPIX)-functionalized G-quadruplex conjugated to the 3'- or 5'-end of the tyrosinamide (TA) aptamer and Zn^II PPIX/G-quadruplex linked to the 3'- and 5'-ends of the TA aptamer through a four-thymidine bridge. Effective photoinduced electron transfer (ET) from Zn^II PPIX/G-quadruplex to bipyridinium-functionalized tyrosinamide, TA-MV²⁺ , bound to the TA aptamer units is demonstrated. The effectiveness of the primary ET quenching of Zn^II PPIX/G-quadruplex by TA-MV²⁺ controls the efficiency of the generation of TA-MV^+. . The photosystem-controlled formation of TA-MV^+. by the different photosystems dictates the secondary activation of the ET cascade corresponding to the ferredoxin-NADP⁺ reductase (FNR)-catalysed reduction of NADP⁺ to NADPH by TA-MV^+. , and the sequestered alcohol dehydrogenase catalysed reduction of acetophenone to 1-phenylethanol by NADPH.

DNA-Responsive SiO2 Nanoparticles, Metal-Organic Frameworks, and Microcapsules for Controlled Drug Release

Recent advances addressing the development of stimuli-responsive nucleic acid (DNA)-functionalized micro/nanocarriers for the controlled release of drugs are presented. The DNA associated with the drug-loaded carriers acts as capping units that lock the drugs in the carriers. In the presence of appropriate triggers, the capping units are unlocked, resulting in the release of the drugs. Three types of DNA-modified carriers are discussed, including mesoporous SiO₂ nanoparticles (MP SiO₂ NPs), metal-organic framework nanoparticles (NMOFs) and micro/nanocapsules. The triggers to unlock the DNA gating units include pH, the dissociation of K⁺-stabilized G-quadruplexes in the presence of crown ethers, the catalytic dissociation of the capping units by enzymes or DNAzymes, the dissociation of capping units by the formation of aptamer-ligand complexes (particularly ligands acting as biomarkers for different diseases), and the use of light for the photochemical unlocking of the DNA gates. Different issues related to the targeting of the different drug-loaded carriers to cancer cells, the switchable ON/OFF release of the drug loads, and the selective cytotoxicity of the drug-loaded carriers toward cancer cells are discussed. Finally, the future perspectives of the stimuli-responsive DNA-based, drug-loaded micro/nanocarriers for future nanomedicine and, in particular, the development of autonomous sense-and-treat systems are addressed.

Programmable i-motif DNA folding topology for a pH-switched reversible molecular sensing device

Four-stranded DNAs including G-quadruplexes and i-motifs are formed from four stretches of identical bases (G or C). A challenge remains in controlling the intermolecular folding of different G-rich or C-rich strands due to the self-association of each component. Here, we introduce a well-designed bimolecular i-motif that does not allow the dimerization of the same strand, and illustrate its usefulness in a pH-switched ATP-sensing DNA molecular device. We analyze two groups of i-motif DNAs containing two stretches of different C-residues (C_n-1T_mC_n and C_nT_mC_n-1; n = 3−6, m = 1, 3) and show that their bimolecular folding patterns (L- and H-form) noticeably differs in the thermal stability. The L-form structures generally display a relatively low stability, with a bigger difference from that of conventional i-motifs formed by C_nT_mC_n. It inspires us to at utmost improving the structural stability by extending the core of L-form bimolecular i-motifs with a few flanking noncanonical base pairs, and therefore to avoid the dimeric association of each component. This meaningful bimolecular i-motif is then incorporated into a three-way junction (3WJ) and a four-way junction (4WJ) functionalized with two components of a ATP-binding split DNA aptamer, allowing the pH-triggered directional assembly of 3WJ and 4WJ into the desired (3+4)WJ structure that is verified by gel electrophoresis. It therefore enables the ATP-induced association of the split aptamer within the (3+4)WJ structure, as monitored by fluorescence quenching. In this way, the designed DNA system behaves as a pH-switched reversible molecular device, showing a high sensitivity and selectivity for fluorescent ATP analysis. The i-motif folding topology-programmed DNA nanoassembly may find more applications in the context of larger 2D/3D DNA nanostructures like lattices and polyhedra.

Programmed dissociation of dimer and trimer origami structures by aptamer-ligand complexes

Dimer- and trimer-origami frames are bridged by duplexes that include caged, sequence-specific, anti-ATP and/or anti-cocaine aptamer sequences. The programmed dissociation of the origami dimers or trimers in the presence of ATP and/or cocaine ligands is demonstrated. The processes are followed by AFM imaging and by electrophoretic experiments.

pH-Stimulated Reconfiguration and Structural Isomerization of Origami Dimer and Trimer Systems

Reversible pH-responsive dimer or trimer origami structures are assembled by bridging origami frames with pH-responsive units. The cyclic pH-stimulated separation and reassembly of dimer origami structures is demonstrated using i-motif or Hoogsteen-type (C-G·C⁺ or T-A·T) interactions. The duplex-bridged dimer T₁-T₂ is separated by the pH-induced formation of an i-motif structure (pH = 4.5), and the dimer is reassembled at pH = 7.0. The duplex-bridged dimer, T₃-T₄, is separated at pH = 4.5 through the formation of C-G·C⁺ triplex structures and is reassembled to the dimer at pH = 7.0. Similarly, the T-A·T triplex-bridged dimer, T₅-T₆, is separated at pH = 9.5 and is reassembled at neutral pH. Finally, a trimer, T₃-T₇-T₆, that includes C-G·C⁺ and T-A·T pH-responsive bridges reveals pH-programmed cleavage to selectively yield the dimers T₃-T₇ or T₇-T₆, which reassemble to the trimer at pH = 7.0. A linear three-frame origami structure bridged by duplexes including caged i-motif units undergoes pH-stimulated isomerization to a bent structure (pH = 4.5) through the formation of i-motif complex and bridging T-A·T triplex units.

2,4-Dihydroxy and O2 Protonated Tautomers of dThd and Thd Coexist in the Gas Phase: Methylation Alters Protonation Preferences versus dUrd and Urd

The gas-phase structures of protonated thymidine, [dThd + H](+), and its modified form, protonated 5-methyluridine, [Thd + H](+), are examined by infrared multiple photon dissociation (IRMPD) action spectroscopy combined with electronic structure calculations. IRMPD action spectra are measured over the ranges extending from ~600 to 1900 cm(-1) and ~2800 to 3800 cm(-1) using the FELIX free electron laser and an optical parametric oscillator/amplifier (OPO/OPA) laser system, respectively. Comparisons between the B3LYP/6-311+G(d,p) linear IR spectra calculated for the stable low-energy conformers and the measured IRMPD spectra are used to determine the most favorable tautomeric conformations of [dThd + H](+) and [Thd + H](+) and to identify those populated in the experiments. Both B3LYP and MP2 levels of theory predict a minor 2,4-dihydroxy tautomer as the ground-state conformer of [dThd + H](+) and [Thd + H](+) indicating that the 2'-hydroxyl substituent of Thd does not exert a significant impact on the structural features. [dThd + H](+) and [Thd + H](+) share parallel IRMPD spectral profiles and yields in both the FELIX and OPO regions. Comparisons between the measured IRMPD and calculated IR spectra suggest that minor 2,4-dihydroxy tautomers and O2 protonated conformers of [dThd + H](+) and [Thd + H](+) are populated in the experiments. Comparison of this work to our previous IRMPD spectroscopy study of protonated 2'-deoxyuridine and uridine suggests that the 5-methyl substituent alters the preferences of O2 versus O4 protonation.

Catalytic nucleic acids (DNAzymes) as functional units for logic gates and computing circuits: from basic principles to practical applications

This feature article addresses the implementation of catalytic nucleic acids as functional units for the construction of logic gates and computing circuits, and discusses the future applications of these systems. The assembly of computational modules composed of DNAzymes has led to the operation of a universal set of logic gates, to field programmable logic gates and computing circuits, to the development of multiplexers/demultiplexers, and to full-adder systems. Also, DNAzyme cascades operating as logic gates and computing circuits were demonstrated. DNAzyme logic systems find important practical applications. These include the use of DNAzyme-based systems for sensing and multiplexed analyses, for the development of controlled release and drug delivery systems, for regulating intracellular biosynthetic pathways, and for the programmed synthesis and operation of cascades.

Formation and Dissociation of the Interstrand i-Motif by the Sequences d(XnC 4Y m) Monitored with Electrospray Ionization Mass Spectrometry

Formation and dissociation of the interstrand i-motifs by DNA with the sequence d(X(n)C(4)Y(m)) (X and Y represent thymine, adenine, or guanine, and n, m range from 0 to 2) are studied with electrospray ionization mass spectrometry (ESI-MS), circular dichroism (CD), and UV spectrophotometry. The ion complexes detected in the gas phase and the melting temperatures (Tm) obtained in solution show that a non-C base residue located at 5' end favors formation of the four-stranded structures, with T > A > G for imparting stability. Comparatively, no rule is found when a non-C base is located at the 3' end. Detection of penta- and hexa-stranded ions indicates the formation of i-motifs with more than four strands. In addition, the i-motifs seen in our mass spectra are accompanied by single-, double-, and triple-stranded ions, and the trimeric ions were always less abundant during annealing and heat-induced dissociation process of the DNA strands in solution (pH = 4.5). This provides a direct evidence of a strand-by-strand formation and dissociation pathway of the interstrand i-motif and formation of the triple strands is the rate-limiting step. In contrast, the trimeric ions are abundant when the tetramolecular ions are subjected to collision-induced dissociation (CID) in the gas phase, suggesting different dissociation behaviors of the interstrand i-motif in the gas phase and in solution. Furthermore, hysteretic UV absorption melting and cooling curves reveal an irreversible dissociation and association kinetic process of the interstrand i-motif in solution.

DNA switches: from principles to applications

The base sequence of nucleic acid encodes structural and functional properties into the biopolymer. Structural information includes the formation of duplexes, G-quadruplexes, i-motif, and cooperatively stabilized assemblies. Functional information encoded in the base sequence involves the strand-displacement process, the recognition properties by aptamers, and the catalytic functions of DNAzymes. This Review addresses the implementation of the information encoded in nucleic acids to develop DNA switches. A DNA switch is a supramolecular nucleic acid assembly that undergoes cyclic, switchable, transitions between two distinct states in the presence of appropriate triggers and counter triggers, such as pH value, metal ions/ligands, photonic and electrical stimuli. Applications of switchable DNA systems to tailor switchable DNA hydrogels, for the controlled drug-release and for the activation of switchable enzyme cascades, are described, and future perspectives of the systems are addressed.

Structure and mechanical characterization of DNA i-motif nanowires by molecular dynamics simulation

We studied the structure and mechanical properties of DNA i-motif nanowires by means of molecular dynamics computer simulations. We built up to 230 nm-long nanowires, based on a repeated TC5 sequence from crystallographic data, fully relaxed and equilibrated in water. The unusual C⋅C(+) stacked structure, formed by four ssDNA strands arranged in an intercalated tetramer, is here fully characterized both statically and dynamically. By applying stretching, compression, and bending deformations with the steered molecular dynamics and umbrella sampling methods, we extract the apparent Young's and bending moduli of the nanowire, as well as estimates for the tensile strength and persistence length. According to our results, the i-motif nanowire shares similarities with structural proteins, as far as its tensile stiffness, but is closer to nucleic acids and flexible proteins, as far as its bending rigidity is concerned. Furthermore, thanks to its very thin cross section, the apparent tensile toughness is close to that of a metal. Besides their yet to be clarified biological significance, i-motif nanowires may qualify as interesting candidates for nanotechnology templates, due to such outstanding mechanical properties.

I-motif-programmed functionalization of DNA nanocircles

The folding of various intra- and intermolecular i-motif DNAs is systematically studied to expand the toolbox for the control of mechanical operations in DNA nanoarchitectures. We analyzed i-motif DNAs with two C-tracts under acidic conditions by gel electrophoresis, circular dichroism, and thermal denaturation and show that their intra- versus intermolecular folding primarily depends on the length of the C-tracts. Two stretches of six or fewer C-residues favor the intermolecular folding of i-motifs, whereas longer C-tracts promote the formation of intramolecular i-motif structures with unusually high thermal stability. We then introduced intra- and intermolecular i-motifs formed by DNAs containing two C-tracts into single-stranded regions within otherwise double-stranded DNA nanocircles. By adjusting the length of C-tracts we can control the intra- and intermolecular folding of i-motif DNAs and achieve programmable functionalization of dsDNA nanocircles. Single-stranded gaps in the nanocircle that are functionalized with an intramolecular i-motif enable the reversible contraction and extension of the DNA circle, as monitored by fluorescence quenching. Thereby, the nanocircle behaves as a proton-fueled DNA prototype machine. In contrast, nanorings containing intermolecular i-motifs induce the assembly of defined multicomponent DNA architectures in response to proton-triggered predicted structural changes, such as dimerization, "kiss", and cyclization. The resulting DNA nanostructures are verified by gel electrophoresis and visualized by atomic force microscopy, including different folding topologies of an intermolecular i-motif. The i-motif-functionalized DNA nanocircles may serve as a versatile tool for the formation of larger interlocked dsDNA nanostructures, like rotaxanes and catenanes, to achieve diverse mechanical operations.

The interactions of phenanthroline compounds with DNAs: preferential binding to telomeric quadruplex over duplex

Compounds that bind and stabilize selectively human telomeric quadruplex DNA structures are of significant interest due to their potential to inhibit telomerase and to halt tumor cell proliferation. In our previous study, we found that three novel phenanthroline derivatives could induce and stabilize significantly the formation of an antiparallel structure of human telomeric G-quadruplex DNA (G(3)(T(2)AG(3))(3)), moreover, these compounds could bind selectively to G-quadruplex over duplex. In order to understand their binding nature, in this work we investigated the interactions of compounds 1-3 with human telomeric G-quadruplex and i-motif (C(3)(A(2)TC(3))(3)) DNAs together with calf thymus DNAs (ct DNA) by means of absorption, fluorescence and CD spectroscopies and competition dialysis assay. Results showed that all three compounds showed the highest affinity for G-quadruplex structure although with least affinity for ct DNA. Compounds 1-3 could also stabilize the structure of i-motif with an increase in melting temperature (ΔT(m)) of 7.6, 7.2 and 10.1°C, respectively, in the presence of 10 times excess of compounds. Their binding stoichiometric ratios were 2:1 and 1:1 for G-quadruplex and i-motif DNAs, respectively. The thermodynamic parameters results indicated that the binding of compound to either quadruplex or duplex DNAs was entropically driven and hydrophobic force played a major role in the reaction.

Junctions between i-motif tetramers in supramolecular structures

The symmetry of i-motif tetramers gives to cytidine-rich oligonucleotides the capacity to associate into supramolecular structures (sms). In order to determine how the tetramers are linked together in such structures, we have measured by gel filtration chromatography and NMR the formation and dissociation kinetics of sms built by oligonucleotides containing two short C stretches separated by a non-cytidine-base. We show that a stretch of only two cytidines either at the 3'- or 5'-end is long enough to link the tetramers into sms. The analysis of the properties of sms formed by oligonucleotides differing by the length of the oligo-C stretches, the sequence orientation and the nature of the non-C base provides a model of the junction connecting the tetramers in sms.

COMPUTATION OF LARGE SYSTEMS WITH AN ECONOMIC BASIS SET: AB INITIO CALCULATIONS OF BIOLOGICAL NUCLEIC ACID BASE PAIRS

We show that an economic basis set, in which the polarization functions are considered only for oxygen and nitrogen atoms of strong electronegativity, can be used to determine reliable structures of nucleic acid base pairs. Mulliken charge analysis and the HOMO-LUMO gap in single-point energy calculations using standard basis sets on the geometric structures optimized with the economic basis set found reasonable agreements with the ones of standard calculations. This study is expected to provide a general guideline for basis set selection in the computation of large biological systems being performed with considerable high accuracy, using a low cost computation resource.

Coexistence of an ILPR i-motif and a partially folded structure with comparable mechanical stability revealed at the single-molecule level

Investigation of i-motif is of high importance to fully understand the biological functions of G quadruplexes in the context of double-stranded DNA. Whereas single-molecule approaches have profiled G quadruplexes from a perspective unavailable by bulk techniques, there is a lack of similar literature on the i-motif in the cytosine (C)-rich region complementary to G quadruplex-forming sequences. Here, we have used laser tweezers to investigate the structures formed in 5'-(TGTCCCCACACCCC)(2), a predominate variant in the insulin-linked polymorphic region (ILPR). We have observed two species with the change in contour length (DeltaL) of 10.4 (+/-0.1) and 5.1 (+/-0.5) nm, respectively. Since DeltaL of 10.4 nm is located within the expected range for an i-motif structure, we assign this species to the i-motif. The formation of the i-motif in the same sequence has been corroborated by bulk experiments such as Br(2) footprinting, circular dichroism, and thermal denaturation. The assignment of the i-motif is further confirmed by decreased formation of this structure (23% to 1.3%) with pH 5.5 --> 7.0, which is a well-established behavior for i-motifs. In contrast to that of the i-motif, the formation of the second species with DeltaL of 5.1 nm remains unchanged (6.1 +/- 1.6%) in the same pH range, implying that pH-sensitive C:CH(+) pairs may not contribute to the structure as significantly as those to the i-motif. Compared to the DeltaG(unfold) of an i-motif (16.0 +/- 0.8 kcal/mol), the decreased free energy in the partially folded structure (DeltaG(unfold) 10.4 +/- 0.7 kcal/mol) may reflect a weakened structure with reduced C:CH(+) pairs. Both DeltaL and DeltaG(unfold) argue for the intermediate nature of the partially folded structure in comparison to the i-motif. In line with this argument, we have directly observed the unfolding of an i-motif through the partially folded structure. The i-motif and the partially folded structure share similar rupture forces of 22-26 pN, which are higher than those that can stall transcription catalyzed by RNA polymerases. This suggests, from a mechanical perspective alone, that either of the structures can stop RNA transcription.

[C7GC4]4 association into supra molecular i-motif structures

The self-associative properties of cytidine-rich oligonucleotides into symmetrical i-motif tetramers give to these oligonucleotides the capacity of forming supramolecular structures (sms) that have potential applications in the nanotechnology domain. In order to facilitate sms formation, oligonucleotides containing two cytidine stretches of unequal length (C_nXC_m) separated by a non-cytidine spacer were synthesized. They were designed to associate into a tetramer including an i-motif core built by intercalation of the C·C⁺ pairs of the longer C stretch with the two dangling non-intercalated strands of the shorter C stretch at each end. Gel filtration chromatography shows that the non-intercalated C-rich ends give to this structure the capacity of forming extremely stable sms. Using C₇GC₄ as a model, we find that the sms formation rate varies as the oligonucleotide concentration and increases at high temperature. Competitively with the tetramer involved in sms elongation, C_nXC_m oligonucleotides form i-motif dimers that compete with sms elongation. The dimer stability is strongly reduced when the pH is moved away from the cytidine pK. This results in an equilibrium shift towards the tetramer and in the acceleration of the sms formation rate. The chromatograms of the sms formed by C₇GC₄ indicate a broad distribution. In a 1.5 mM solution incubated at 37°C, the equilibrium distribution is centered on a molecular weight corresponding to the assembly of nine tetramers and the upper limit corresponds to 80 tetramers. The lifetime of this structure is about 4 days at 40°C, pH 4.6.

[5mCCTCTCTCC]4: an i-motif tetramer with intercalated T*T pairs

The i-motif is a four-stranded structure built by intercalation in a head-to-tail orientation of two parallel duplexes associated by hemiprotonated C(*)C(+) pairs. T*T pairs are nearly isomorphic of C*C(+) pairs; however the structural investigations of i-motif tetramers containing thymidines suggest that the i-motif cannot accommodate T*T pairs in a face-to-face orientation. The tetramer of 5mCCTCTCTCC make an exception. It includes two symmetry related open/closed T3/T7 groups, but the central thymidines form two long-lived T5*T5 pairs that are intercalated in a face-to-face orientation. This observation provides indications of the origin of the conflict that usually hinders T*T intercalation into i-motif structures and more generally of the constraints influencing i-motif formation.

Formation of i-motif structure at neutral and slightly alkaline pH

It is well known that oligonucleotides containing tracts cytosines can form i-motif structures under acidic conditions (pH < 7). However, whether i-motif can be formed under normal physiological cellular conditions (pH 7.0-7.5) is yet no conclusive proof. In the present work, using circular dichroism (CD), UV absorption spectroscopies and native polyacrylamide gel electrophoresis (PAGE), we provided the compelling evidence for the formation of i-motif structures by four cytosine clusters, [C(3)TA(2)](3)C(3) (HT), [C(4)G](3)C(4)TA (RET), C(2)T(3)C(2)T(4)C(2)T(3)C(2) (CTC) and GC(2)GC(3)A(4)C(6)G (Rb), at neutral and slightly alkaline pH at 4 degrees C. Furthermore, for HT, we also supplied the evidence for the formation of i-motif structure by fluorescence resonance energy transfer (FRET) and investigated its folding kinetics. The formation time constants obtained by CD and fluorescence experiments are 214 and 493 s, respectively, indicating that HT can slowly form i-motif structure at pH 7.0 and 4 degrees C. This work implies that i-motif structures may possible form in vivo.

The energetics of i-DNA tetraplex structures formed intermolecularly by d(TC5) and intramolecularly by d[(C5T3)3C5]

Cytosine-rich DNA at low pH adopts an antiparallel tetraplex structure via the intercalation of two partially protonated, parallel stranded duplexes. This intriguing structural motif has been named i-DNA. We have used a combination of spectroscopic and calorimetric techniques to characterize the properties of an intermolecular i-DNA formed by d(TC(5)) and an intramolecular i-DNA formed by d[(C(5)T(3))(3)C(5)]. Our measurements reveal that both i-DNA complexes are enthalpically stabilized by 6.5-7.0 kcal/mol(base) and entropically destabilized by 20 cal/mol(base)/K. These values are about 50% larger than the corresponding enthalpy and entropy values per base for Watson and Crick duplexes and for Hoogsteen triplexes, while being similar to per base enthalpy and entropy values reported for G-quadruplexes. Our data also reveal a positive heat capacity change between 20 and 30 cal/mol(base)/K, values similar to that reported for polymeric Watson & Crick DNA duplexes. Solution-dependent studies reveal the overall thermal and thermodynamic stability of i-DNA complexes to be dictated by an interplay between pH and ionic strength. Based on the thermodynamic data measured, we discuss the feasibility of i-DNA formation in the context of conventional DNA sequences, while commenting on potential roles for this structural motif in biological regulatory mechanisms.

Calorimetric unfolding of the bimolecular and i-motif complexes of the human telomere complementary strand, d(C3TA2)4

A combination of spectroscopic and calorimetric techniques is used to determine the unfolding thermodynamics of the complexes formed by the complementary sequence of the human telomere, d(C(3)TA(2))(4), in the pH range of 4.2 to 6. Calorimetric melting curves show biphasic transitions; both transitions are shifted to higher temperatures as the pH is decreased, indicative of cytosine protonation, which favors the formation of C*C(+) base pairs. Furthermore, the transition temperature, T(M), of the lower transition depends on strand concentration, while the T(M) of the higher transition is independent of strand concentration, indicating the following sequential melting: bimolecular complex(s)-->intramolecular complex-->random coil. The thermodynamic profiles for the formation of each complex, bimolecular and i-motif reveals small favorable free energy terms resulting from favorable enthalpy-unfavorable entropy compensations, uptake of protons, marginal uptake of counterions (i-motif) and marginal release of water molecules (i-motif). Furthermore, an enthalpy of 3.2 kcal/mol (bimolecular complex) and 5.0 kcal/mol (i-motif) is estimated for a single C*C(+)/C*C(+) base-pair stack.

Computation of large systems with an economic basis set: Structures and reactivity indices of nucleic acid base pairs from density functional theory

We show here that an economic basis set can describe nucleic acid base pairs involving the hydrogen bond interactions in density functional calculations. The economic basis set in which the polarization function is added only to oxygen and nitrogen atoms of strong electronegativity can predict reliable geometric structures and dipole moment of nucleic acid base pairs, comparable to those obtained from the basis set of 6-31G* in B3LYP calculations. Combining single point calculations with the standard basis set on the geometric structures optimized by the economic basis set, the present approach has predicted accurate natural bond orbital charge, binding energy, electronegativity, hardness, softness, and electrophilicity index. The principle for basis selection presented in this study can be regarded as a general guideline in the computation of large biological systems with considerably high accuracy and low computational expense.

Structure, internal motions and association-dissociation kinetics of the i-motif dimer of d(5mCCTCACTCC)

At slightly acidic pH, the association of two d(5mCCTCACTCC) strands results in the formation of an i-motif dimer. Using NMR methods, we investigated the structure of [d(5mCCTCACTCC)]2, the internal motion of the base pairs stacked in the i-motif core, the dimer formation and dissociation kinetics versus pH. The excellent resolution of the 1H and 31P spectra provided the determination of dihedral angles, which together with a large set of distance restraints, improve substantially the definition of the sugar-phosphate backbone by comparison with previous NMR studies of i-motif structures. [d(5mCCTCACTCC)]2 is built by intercalation of two symmetrical hairpins held together by six symmetrical C*C+ pairs and by pair T7*T7. The hairpin loops that are formed by a single residue, A5, cross the narrow grooves on the same side of the i-motif core. The base pair intercalation order is C9*C9+/5mC1*5mC1+/C8*C8+/C2*C2+/T7.T7/C6*C6+/C4*C4+. The T3 bases are flipped out in the wide grooves. The core of the structure includes four long-lived pairs whose lifetimes at 15 degrees C range from 100 s (C8*C8+) to 0.18 s (T7*T7). The formation rate and the lifetime of [d(5mCCTCACTCC)]2 were measured between pH 6.8 and 4.8. The dimer formation rate is three to four magnitude orders slower than that of a B-DNA duplex. It depends on pH, as it must occur for a bimolecular process involving non cooperative association of neutral and protonated residues. In the range of pH investigated, the dimer lifetime, 500 s at 0 degrees C, pH 6.8, varies approximately as 10(-pH).

T.T pair intercalation and duplex interconversion within i-motif tetramers

The i-motif is a four-stranded structure built by intercalation in head-to-tail orientation of two parallel duplexes associated by hemi-protonated C.C(+) pairs. Using NMR methods, we investigated the structure, the base-pair opening kinetics and the internal motions of three i-motif tetramers: [d(5mCCTCnTCC)](4) (n=1, 2, 3). These tetramers cannot accommodate the intercalation of two T.T pairs in face-to-face orientation. They are built by intercalation of two symmetrical duplexes whose contacting T3/TM thymidine bases (M=5, 6, 7) are either base-paired or unstacked. The arrangement of the unstacked/paired thymidine bases of the two T/T groups results in the formation of two different conformations. One, fully symmetric, whose thymidine bases T3 and TM are unstacked and base-paired respectively. The other is the asymmetric assembly of two duplexes: one where both thymidine bases are unstacked and the other with two T.T pairs. The proportion of the symmetric conformer increases from a value beyond the detection threshold for n=1, to 19% for n=2 and up to more than 95% for n=3. The exchange cross-peaks connecting together the intercalated duplexes of [d(5mCCTCTCC)](4) and [d(5mCCTCCTCC)](4) reveal a structural interconversion induced by the simultaneous opening/closing of the contacting T3/TM thymidine bases. In [d(5mCCTCCTCC)](4) the motion of the T3/T6 groups triggers the interconversion of the symmetric and asymmetric conformations. In [d(5mCCTCTCC)](4) the intercalated duplexes exchange their structures in an apparently concerted motion, suggesting the simultaneous opening/closing of two distant T3/T5* and T5/T3* switching groups. The spectrum of [d(5mCCTCCCTCC)](4) is fully symmetric and, for this reason, its spectrum gives no indication for duplex interconversion. Nevertheless, the imino proton exchange kinetics argues for a switching motion of the T3/T7 group. Duplex interconversion is not detectable in that case, due to the tetramer symmetry. The origin of the structural conflict hindering the intercalation of two T.T pairs into the i-motif is discussed.

Sedimentation analysis of novel DNA structures formed by homo-oligonucleotides

Sedimentation velocity analysis has been used to examine the base-specific structural conformations and unusual hydrogen bonding patterns of model oligonucleotides. Homo-oligonucleotides composed of 8-28 residues of dA, dT, or dC nucleotides in 100 mM sodium phosphate, pH 7.4, at 20 degrees C behave as extended monomers. Comparison of experimentally determined sedimentation coefficients with theoretical values calculated for assumed helical structures show that dT and dC oligonucleotides are more compact than dA oligonucleotides. For dA oligonucleotides, the average width (1.7 nm), assuming a cylindrical model, is smaller than for control duplex DNA whereas the average rise per base (0.34 nm) is similar to that of B-DNA. For dC and dT oligonucleotides, there is an increase in the average widths (1.8 nm and 2.1 nm, respectively) whereas the average rise per base is smaller (0.28 nm and 0.23 nm, respectively). A significant shape change is observed for oligo dC(28) at lower temperatures (10 degrees C), corresponding to a fourfold decrease in axial ratio. Optical density, circular dichroism, and differential scanning calorimetry data confirm this shape change, attributable from nuclear magnetic resonance analysis to i-motif formation. Sedimentation equilibrium studies of oligo dG(8) and dG(16) reveal extensive self-association and the formation of G-quadruplexes. Continuous distribution analysis of sedimentation velocity data for oligo dG(16) identifies the presence of discrete dimers, tetramers, and dodecamers. These studies distinguish the conformational and colligative properties of the individual bases in DNA and their inherent capacity to promote specific folding pathways.

Structure of a C-rich strand fragment of the human centromeric satellite III: a pH-dependent intercalation topology

Repetitive DNA sequences may adopt unusual pairing arrangements. At acid to neutral pH, cytidine-rich DNA oligodeoxynucleotides can form the i-motif structure in which two parallel-stranded duplexes with C.C(+) pairs are intercalated head-to-tail. The i-motif may be formed by multimeric associations or by intra-molecular folding, depending on the number of cytidine tracts, the nucleotide sequences between them, and the experimental conditions. We have found that a natural fragment of the human centromeric satellite III, d(CCATTCCATTCCTTTCC), can form two monomeric i-motif structures that differ in their intercalation topology and that are favored at pH values higher (the eta-form) and lower (the lambda-form) than 4.6. The change in intercalation may be related to adenine protonation in the loops. We studied the uridine derivative methylated on the first cytidine base, d(5mCCATTCCAUTCCUTTCC), whose proton spectrum is better resolved. The intercalation topologies are (C7.C17)/(5mC1.C11)/(C6.C16)/(C2.C12) for form lambda and (5mC1.C11)/(C7.C17)/(C2.C12)/(C6.C16) for form eta. We have solved the structure of the eta-form, and we present a model for the lambda-form. The switch from eta to lambda involves disruption of the i-motif. In both forms, the central AUT linker crosses the wide groove, and the first and the third linkers loop across the minor grooves. The i-motif core is extended in the eta-form by the inter-loop reverse Watson-Crick A3.U13 pair, whose dissociation constant is around 10(-2) at 0 degrees C, and in the lambda-form by the interloop T5.T15 pair. In contrast, d(5mCCATTCCTTACCTTTCC) folds into a pH-independent structure that has the same intercalation topology as the lambda-form. The i-motif core is extended below by the interloop T5.T15 pair and closed on top by the T8.A10 pair.Thus, the C-rich strand of the human satellite III tandem repeats, like the G-rich strand, can fold into various compact structures. The relevance of these features to centromeric function remains unknown.

Cationic porphyrins promote the formation of i-motif DNA and bind peripherally by a nonintercalative mechanism

Telomeric C-rich strands can form a noncanonical intercalated DNA structure known as an i-motif. We have studied the interactions of the cationic porphyrin 5,10,15,20-tetra-(N-methyl-4-pyridyl)porphine (TMPyP4) with the i-motif forms of several oligonucleotides containing telomeric sequences. TMPyP4 was found to promote the formation of the i-motif DNA structure. On the basis of (1)H NMR studies, we have created a model of the i-motif-TMPyP4 complex that is consistent with all the available experimental data. Two-dimensional NOESY data prompted us to conclude that TMPyP4 binds specifically to the edge of the intercalated DNA core by a nonintercalative mechanism. Since we have shown that TMPyP4 binds to and stabilizes the G-quadruplex form of the complementary G-rich telomeric strand, this study raises the intriguing possibility that TMPyP4 can trigger the formation of unusual DNA structures in both strands of the telomeres, which may in turn explain the recently documented biological effects of TMPyP4 in cancer cells.

Chemical modification of pyrimidine TFOs: effect on i-motif and triple helix formation

In order to form more stable triple helical structures or to prevent their degradation in cells, oligonucleotide analogs are routinely used, either in the backbone or among the bases. The target sequence chosen for this study is a 16-base-long oligopurine-oligopyrimidine region present in the human neurotrophin 4/5 gene. Seven different chemical modifications were tested for their effect on (i) triple helix formation and (ii) i-DNA stability. i-DNA is a tetrameric structure involving hemiprotonated C x C+ base pairs, which may act as a competing structure for triplex formation, especially in the case of a cytosine-rich third strand. At acid pH, oligophosphoramidates formed the most stable triple helix, whereas oligonucleotides including 5-propynyl-dU formed a stable i-motif which precluded triplex formation. Only two candidates stabilized triple helices at neutral pH: oligonucleotides with phosphoramidate linkage and phosphodiester oligonucleotides containing 5-methyl-dC and 5-propynyl-dU.

The i-motif in nucleic acids

Seven years after the discovery of the DNA i-motif, partial explanations for its occurrence have been uncovered, possibly involving CHellipsisO hydrogen bonds across the narrow grooves. Investigations of its biological significance have been encouraged by the demonstration and description of the intramolecular i-motif structure of human telomeric and centromeric sequences, by the recent observation of an intercalated RNA structure and by the discovery of proteins that associate with DNA sequences carrying cytosine repeats. The compatibility of the intercalation with peptide and phosphorothioate DNA analogs is favorable for possible pharmaceutical applications.

The solution structure and internal motions of a fragment of the cytidine-rich strand of the human telomere

We present the solution structure of d(CCCTA2CCCTA2CCCTA2CCCT), a fragment of the vertebrate telomere which folds intramolecularly. The four cytidine stretches form an i-motif which includes six intercalated C.C+ pairs and terminates with the cytidines at the 5' extremity of each stretch. Above, the second TA2 linker loops across one of the narrow grooves, while at the bottom, the first and third linkers loop across the wide grooves. At 30 degrees C, the spectra of the first and third linkers are quasi-degenerate. Severe broadening at lower temperature indicates that this results from motional averaging between at least two structures of each bottom loop, and makes it impossible to solve the configuration of the bottom loops directly, in contrast to the rest of the structure. We therefore turned to the modified sequence d(CCCTA(2)5MCCCTA2CCCUA2CCCT) in which the two base substitutions (underlined) break the quasi-symmetry between linkers 1 and 3. The three loops follow approximately the hairpin "second pattern" of Hilbers. In the first loop, T4 is in the syn orientation, whereas its analog in the third loop, U16, oriented anti, is in a central location, where it interacts with bases of both loops, thus contributing to their tight association. The only motion is a syn/anti flip of A18 in the third loop. Returning to the telomere fragment, we show that each of the bottom loops switches between the structures identified in the first and third loops of the modified structure. The motions are concerted, and the resulting configurations of the bottom loop cluster present a bulge to either right (T4 syn) or left (T16 syn).