Modulation of yeast F-actin structure by a mutation in the nucleotide-binding cleft

Diversity from similarity: cellular strategies for assigning particular identities to actin filaments and networks

The actin cytoskeleton has the particularity of being assembled into many functionally distinct filamentous networks from a common reservoir of monomeric actin. Each of these networks has its own geometrical, dynamical and mechanical properties, because they are capable of recruiting specific families of actin-binding proteins (ABPs), while excluding the others. This review discusses our current understanding of the underlying molecular mechanisms that cells have developed over the course of evolution to segregate ABPs to appropriate actin networks. Segregation of ABPs requires the ability to distinguish actin networks as different substrates for ABPs, which is regulated in three different ways: (1) by the geometrical organization of actin filaments within networks, which promotes or inhibits the accumulation of ABPs; (2) by the identity of the networks' filaments, which results from the decoration of actin filaments with additional proteins such as tropomyosin, from the use of different actin isoforms or from covalent modifications of actin; (3) by the existence of collaborative or competitive binding to actin filaments between two or multiple ABPs. This review highlights that all these effects need to be taken into account to understand the proper localization of ABPs in cells, and discusses what remains to be understood in this field of research.

Molecular mechanisms of disease-related human β-actin mutations p.R183W and p.E364K

Cytoplasmic β-actin supports fundamental cellular processes in healthy and diseased cells including cell adhesion, migration, cytokinesis and maintenance of cell polarity. Mutations in ACTB, the gene encoding cytoplasmic β-actin, lead to severe disorders with a broad range of symptoms. The two dominant heterozygous gain-of-function β-actin mutations p.R183W and p.E364K were identified in patients with developmental malformations, deafness and juvenile-onset dystonia (p.R183W) and neutrophil dysfunction (p.E364K). Here, we report the recombinant production and functional characterization of the two mutant proteins. Arg183 is located near the nucleotide-binding pocket of actin. Our results from biochemical studies and molecular dynamics simulations show that replacement by a tryptophan residue at position 183 establishes an unusual stacking interaction with Tyr69 that perturbs nucleotide release from actin monomers and polymerization behavior by inducing a closed state conformation. The replacement of Glu364 by a lysine residue appears to act as an allosteric trigger event leading to the preferred formation of the closed state. Thus, our approach indicates that both mutations affect interdomain mobility and nucleotide interactions as a basis for the formation of disease phenotypes in patients.

Actin carbonylation: from cell dysfunction to organism disorder

Protein carbonylation is an important event in the context of proteostasis because of its frequency, non-enzymatic nature and irreversible effects. The carbonylation of proteins disturbs their function and leads to protein aggregates, which may precede cellular senescence and cell death. Actin, an evolutionarily conserved cytoskeletal protein that is involved in important cellular processes, is one of the proteins most susceptible to carbonylation. Conditions resulting in oxidative stress are likely to lead to its carbonylation, loss of function and aggregate formation. In this review, we summarise actin susceptibility to carbonylation, as verified in cell free extracts, cell lines and animal models, and review its fate through the activation of cell mechanisms aimed at removing damaged proteins. Their insufficient activity may underlie age-related diseases and the ageing process. This article is part of a Special Issue entitled: Posttranslational Protein modifications in biology and Medicine.

Identification of cation-binding sites on actin that drive polymerization and modulate bending stiffness

The assembly of actin monomers into filaments and networks plays vital roles throughout eukaryotic biology, including intracellular transport, cell motility, cell division, determining cellular shape, and providing cells with mechanical strength. The regulation of actin assembly and modulation of filament mechanical properties are critical for proper actin function. It is well established that physiological salt concentrations promote actin assembly and alter the overall bending mechanics of assembled filaments and networks. However, the molecular origins of these salt-dependent effects, particularly if they involve nonspecific ionic strength effects or specific ion-binding interactions, are unknown. Here, we demonstrate that specific cation binding at two discrete sites situated between adjacent subunits along the long-pitch helix drive actin polymerization and determine the filament bending rigidity. We classify the two sites as "polymerization" and "stiffness" sites based on the effects that mutations at the sites have on salt-dependent filament assembly and bending mechanics, respectively. These results establish the existence and location of the cation-binding sites that confer salt dependence to the assembly and mechanics of actin filaments.

Structural states and dynamics of the D-loop in actin

Conformational changes induced by ATP hydrolysis on actin are involved in the regulation of complex actin networks. Previous structural and biochemical data implicate the DNase I binding loop (D-loop) of actin in such nucleotide-dependent changes. Here, we investigated the structural and conformational states of the D-loop (in solution) using cysteine scanning mutagenesis and site-directed labeling. The reactivity of D-loop cysteine mutants toward acrylodan and the mobility of spin labels on these mutants do not show patterns of an α-helical structure in monomeric and filamentous actin, irrespective of the bound nucleotide. Upon transition from monomeric to filamentous actin, acrylodan emission spectra and electron paramagnetic resonance line shapes of labeled mutants are blue-shifted and more immobilized, respectively, with the central residues (residues 43-47) showing the most drastic changes. Moreover, complex electron paramagnetic resonance line shapes of spin-labeled mutants suggest several conformational states of the D-loop. Together with a new (to our knowledge) actin crystal structure that reveals the D-loop in a unique hairpin conformation, our data suggest that the D-loop equilibrates in F-actin among different conformational states irrespective of the nucleotide state of actin.

Cofilin-linked changes in actin filament flexibility promote severing

The actin regulatory protein, cofilin, increases the bending and twisting elasticity of actin filaments and severs them. It has been proposed that filaments partially decorated with cofilin accumulate stress from thermally driven shape fluctuations at bare (stiff) and decorated (compliant) boundaries, thereby promoting severing. This mechanics-based severing model predicts that changes in actin filament compliance due to cofilin binding affect severing activity. Here, we test this prediction by evaluating how the severing activities of vertebrate and yeast cofilactin scale with the flexural rigidities determined from analysis of shape fluctuations. Yeast actin filaments are more compliant in bending than vertebrate actin filaments. Severing activities of cofilactin isoforms correlate with changes in filament flexibility. Vertebrate cofilin binds but does not increase the yeast actin filament flexibility, and does not sever them. Imaging of filament thermal fluctuations reveals that severing events are associated with local bending and fragmentation when deformations attain a critical angle. The critical severing angle at boundaries between bare and cofilin-decorated segments is smaller than in bare or fully decorated filaments. These measurements support a cofilin-severing mechanism in which mechanical asymmetry promotes local stress accumulation and fragmentation at boundaries of bare and cofilin-decorated segments, analogous to failure of some nonprotein materials.

Conformational dynamics of actin: effectors and implications for biological function

Actin is a protein abundant in many cell types. Decades of investigations have provided evidence that it has many functions in living cells. The diverse morphology and dynamics of actin structures adapted to versatile cellular functions is established by a large repertoire of actin-binding proteins. The proper interactions with these proteins assume effective molecular adaptations from actin, in which its conformational transitions play essential role. This review attempts to summarise our current knowledge regarding the coupling between the conformational states of actin and its biological function.

F-actin structure destabilization and DNase I binding loop: fluctuations mutational cross-linking and electron microscopy analysis of loop states and effects on F-actin

The conformational dynamics of filamentous actin (F-actin) is essential for the regulation and functions of cellular actin networks. The main contribution to F-actin dynamics and its multiple conformational states arises from the mobility and flexibility of the DNase I binding loop (D-loop; residues 40-50) on subdomain 2. Therefore, we explored the structural constraints on D-loop plasticity at the F-actin interprotomer space by probing its dynamic interactions with the hydrophobic loop (H-loop), the C-terminus, and the W-loop via mutational disulfide cross-linking. To this end, residues of the D-loop were mutated to cysteines on yeast actin with a C374A background. These mutants showed no major changes in their polymerization and nucleotide exchange properties compared to wild-type actin. Copper-catalyzed disulfide cross-linking was investigated in equimolar copolymers of cysteine mutants from the D-loop with either wild-type (C374) actin or mutant S265C/C374A (on the H-loop) or mutant F169C/C374A (on the W-loop). Remarkably, all tested residues of the D-loop could be cross-linked to residues 374, 265, and 169 by disulfide bonds, demonstrating the plasticity of the interprotomer region. However, each cross-link resulted in different effects on the filament structure, as detected by electron microscopy and light-scattering measurements. Disulfide cross-linking in the longitudinal orientation produced mostly no visible changes in filament morphology, whereas the cross-linking of D-loop residues >45 to the H-loop, in the lateral direction, resulted in filament disruption and the presence of amorphous aggregates on electron microscopy images. A similar aggregation was also observed upon cross-linking the residues of the D-loop (>41) to residue 169. The effects of disulfide cross-links on F-actin stability were only partially accounted for by the simulations of current F-actin models. Thus, our results present evidence for the high level of conformational plasticity in the interprotomer space and document the link between D-loop interactions and F-actin stability.

Actin isoform-specific conformational differences observed with hydrogen/deuterium exchange and mass spectrometry

Actin can exist in multiple conformations necessary for normal function. Actin isoforms, although highly conserved in sequence, exhibit different biochemical properties and cellular roles. We used amide proton hydrogen/deuterium (HD) exchange detected by mass spectrometry to analyze conformational differences between Saccharomyces cerevisiae and muscle actins in the G and F forms to gain insight into these differences. We also utilized HD exchange to study interdomain and allosteric communication in yeast-muscle hybrid actins to better understand the conformational dynamics of actin. Areas showing differences in HD exchange between G- and F-actins are areas of intermonomer contacts, consistent with the current filament models. Our results showed greater exchange for yeast G-actin compared with muscle actin in the barbed end pivot region and areas in subdomains 1 and 2 and for F-actin in monomer-monomer contact areas. These results suggest greater flexibility of the yeast actin monomer and filament compared with muscle actin. For hybrid G-actins, the muscle-like and yeastlike parts of the molecule generally showed exchange characteristics resembling their parent actins. A few exceptions were a peptide on top of subdomain 2 and the pivot region between subdomains 1 and 3 with muscle actin-like exchange characteristics although the areas were yeastlike. These results demonstrate that there is cross-talk between subdomains 1 and 2 and the large and small domains. Hybrid F-actin data showing greater exchange compared with both yeast and muscle actins are consistent with mismatched yeast-muscle interfaces resulting in decreased stability of the hybrid filament contacts.

Dual roles of Gln137 of actin revealed by recombinant human cardiac muscle alpha-actin mutants

The actin filament is quite dynamic in the cell. To determine the relationship between the structure and the dynamic properties of the actin filament, experiments using actin mutants are indispensable. We focused on Gln(137) to understand the relationships between two activities: the conformational changes relevant to the G- to F-actin transition and the activation of actin ATPase upon actin polymerization. To elucidate the function of Gln(137) in these activities, we characterized Gln(137) mutants of human cardiac muscle alpha-actin. Although all of the single mutants, Q137E, Q137K, Q137P, and Q137A, as well as the wild type were expressed by a baculovirus-based system, only Q137A and the wild type were purified to high homogeneity. The CD spectrum of Q137A was similar to that of the wild type, and Q137A showed the typical morphology of negatively stained Q137A F-actin images. However, Q137A had an extremely low critical concentration for polymerization. Furthermore, we found that Q137A polymerized 4-fold faster, cleaved the gamma-phosphate group of bound ATP 4-fold slower, and depolymerized 5-fold slower, as compared with the wild-type rates. These results suggest that Gln(137) plays dual roles in actin polymerization, in both the conformational transition of the actin molecule and the mechanism of ATP hydrolysis.

Properties of actin from the fission yeast Schizosaccharomyces pombe and interaction with fission yeast profilin

The fission yeast Schizosaccharomyces pombe serves as a model system for studying role of actin cytoskeleton, since it has simple actin cytoskeletons and is genetically tractable. In contrast, biochemical approaches using this organism are still developing; fission yeast actin has so far not been isolated in its native form and characterized, and therefore, biochemical assays of fission yeast actin-binding proteins (ABPs) or myosin have been performed using rabbit skeletal muscle actin that may interact with the fission yeast ABPs in a manner different from fission yeast actin. Here, we report a novel method for isolating functionally active actin from fission yeast cells. The highly purified fission yeast actin polymerized with kinetics somewhat different from those of muscle actin and forms filaments that are structurally indistinguishable from skeletal muscle actin filaments. The fission yeast actin was a significantly weaker activator of Mg(2+)-ATPase of HMM of skeletal muscle myosin than muscle actin. The fission yeast profilin Cdc3 suppressed polymerization of fission yeast actin more effectively than that of muscle actin and showed an affinity for fission yeast actin higher than for muscle actin. The establishment of purification of fission yeast actin will enable reconstruction of physiologically relevant interactions between the actin and fission yeast ABPs or myosins and contribute to clarification of function of actin cytoskeleton in various cellular activities.

Malaria Parasite Actin Filaments are Very Short

A novel form of actomyosin regulation has recently been proposed in which the polymerisation of new actin filaments regulates apicomplexan parasite motility. Here, we identified actin I in the merozoites of Plasmodium falciparum by mass spectrometry. The only post-translational modification is acetylation of the N terminus (acetyl-Gly-Glu-actin), while methylation of histidine 73, a common modification for actin, is absent. Results obtained with anti-actin antibodies suggest that, in contrast to a previous report, there is no actin-ubiquitin conjugate in merozoites. About half of the extracted monomeric actin polymerised and actin filaments could be sedimented at 500,000g. In contrast, centrifugation at 100,000g, conditions commonly used to sediment filamentous actin, yielded very little F-actin. In a functional characterisation using an in vitro motility assay, actin filaments moved over myosin at a velocity indistinguishable from that of rabbit skeletal actin. Filament length, however, was too short to be resolved by conventional fluorescence microscopy. On electron micrographs an average filament length of approximately 100nm was determined. We also identified by mass spectrometry proteins co-purifying with filamentous actin, which are potential actin-binding proteins. Our results demonstrate differences in actin filament dynamics for an apicomplexan parasite, which could be due to specific properties of the actin and/or actin-regulatory proteins.

Role of the N-terminal negative charges of actin in force generation and cross-bridge kinetics in reconstituted bovine cardiac muscle fibres

Mutant yeast actins were used to determine the role of actin's N-terminal negative charges in force generation. The thin filament was selectively removed from bovine cardiac skinned muscle fibres by gelsolin, and the actin filament was reconstituted from purified G-actin. In this reconstitution, yeast wild-type actin (2Ac: two N-terminal negative charges), yeast mutant actins (3Ac and 4Ac), and rabbit skeletal muscle actin (MAc) were used. The effects of phosphate, ATP and ADP on force development were studied at 25 degrees C. With MAc, isometric tension was 77% of the initial tension owing to the lack of a regulatory system. With 2Ac, isometric tension was 10% of the initial tension; with 3Ac, isometric tension was 23%; and with 4Ac, isometric tension was 44%. Stiffness followed a similar pattern (2Ac < 3Ac < 4Ac < MAc). A similar trend was observed during rigor induction and relaxation. Sinusoidal analysis was performed to obtain the kinetic constants of the cross-bridge cycle. The results showed that the variability of the kinetic constants was < or = 2.5-fold among the 2Ac, 4Ac and MAc muscle models. When the cross-bridge distribution was examined, there was no significant reapportionment among these three models examined. These results indicate that force supported by each cross-bridge is modified by the N-terminal negative charges of actin, presumably via the actomyosin interface. We conclude that two N-terminal negative charges are not adequate, three negative charges are intermediate, and four negative charges are necessary to generate force.

Muscle disease caused by mutations in the skeletal muscle alpha-actin gene (ACTA1)

Mutations in the skeletal muscle alpha-actin gene (ACTA1) associated with congenital myopathy with excess of thin myofilaments, nemaline myopathy and intranuclear rod myopathy were first described in 1999. At that time, only 15 different missense mutations were known in ACTA1. More than 60 mutations have now been identified. This review analyses this larger spectrum of mutations in ACTA1. It investigates the molecular consequences of the mutations found to date, provides a framework for genotype-phenotype correlation and suggests future studies in light of results of investigation of normal and mutant actin in other systems, notably the actin specific to the indirect flight muscles of Drosophila. The larger series confirms that the majority of ACTA1 mutations are dominant, a small number are recessive and most isolated cases with no previous family history have de novo dominant mutations. The severity of the disease caused ranges from lack of spontaneous movements at birth requiring immediate mechanical ventilation, to mild disease compatible with life to adulthood. Overall, the mutations within ACTA1 are randomly distributed throughout the protein. However, the larger series of mutations now available indicates that there may be clustering of mutations associated with some phenotypes, e.g. actin myopathy. This would suggest that interference with certain actin functions may be more associated with certain phenotypes, though the exact pathophysiology of the actin mutations remains unknown.

Actin binding proteins: regulation of cytoskeletal microfilaments

The actin cytoskeleton is a complex structure that performs a wide range of cellular functions. In 2001, significant advances were made to our understanding of the structure and function of actin monomers. Many of these are likely to help us understand and distinguish between the structural models of actin microfilaments. In particular, 1) the structure of actin was resolved from crystals in the absence of cocrystallized actin binding proteins (ABPs), 2) the prokaryotic ancestral gene of actin was crystallized and its function as a bacterial cytoskeleton was revealed, and 3) the structure of the Arp2/3 complex was described for the first time. In this review we selected several ABPs (ADF/cofilin, profilin, gelsolin, thymosin beta4, DNase I, CapZ, tropomodulin, and Arp2/3) that regulate actin-driven assembly, i.e., movement that is independent of motor proteins. They were chosen because 1) they represent a family of related proteins, 2) they are widely distributed in nature, 3) an atomic structure (or at least a plausible model) is available for each of them, and 4) each is expressed in significant quantities in cells. These ABPs perform the following cellular functions: 1) they maintain the population of unassembled but assembly-ready actin monomers (profilin), 2) they regulate the state of polymerization of filaments (ADF/cofilin, profilin), 3) they bind to and block the growing ends of actin filaments (gelsolin), 4) they nucleate actin assembly (gelsolin, Arp2/3, cofilin), 5) they sever actin filaments (gelsolin, ADF/cofilin), 6) they bind to the sides of actin filaments (gelsolin, Arp2/3), and 7) they cross-link actin filaments (Arp2/3). Some of these ABPs are essential, whereas others may form regulatory ternary complexes. Some play crucial roles in human disorders, and for all of them, there are good reasons why investigations into their structures and functions should continue.

The regulation of subtilisin-cleaved actin by tropomyosin/troponin

Vertebrate striated muscle contraction is regulated in a Ca(2+)-dependent fashion by tropomyosin (Tm) and troponin (Tn). This regulation involves shifts in the position of Tm and Tn on actin filaments and may include conformational changes in actin that are then communicated to myosin subfragment 1 (S1). To determine whether subdomain 2 of actin plays a role in this regulation, the DNase-I loop 38-52 of this subdomain was cleaved by subtilisin between residues Met(47) and Gly(48). Despite impaired unregulated function, the potentiation and regulation of cleaved actin movement in the in vitro motility assay was not significantly different from that of uncleaved actin. Stopped-flow measurements of ADP release from regulated and unregulated cleaved acto-S1 showed a marked increase in ADP release from acto-S1 in the presence of the regulatory complex. The enhancement of the actin affinity for S1 in the presence of regulatory proteins was greater for uncleaved than for cleaved F-actin. Finally, both cleaved and uncleaved actins protect myosin loop 1 from papain cleavage equally well. Our results suggest that the potentiation of actin function in the in vitro motility assay by regulatory proteins stems from changes in cross-bridge cycle kinetics. In addition, the unimpaired calcium-sensitive regulation of cleaved actin indicates that subdomain 2 conformation does not play an essential role in the regulation process.

Regulation of yeast actin behavior by interaction of charged residues across the interdomain cleft

His(73) participates in the regulation of the nucleotide binding cleft conformation in yeast actin. Earlier molecular dynamics studies suggested that Asp(184) interacts with His(73) thereby stabilizing a "closed-cleft" G-actin. However, beta-actin in the open-cleft state shows a closer interaction of His(73) with Asp(179) than with Asp(184). We have thus assessed the relative importance of Asp(184) and Asp(179) on yeast actin stability and function. Neutral substitutions at 184 or 179 alone had little adverse effect on the monomer and polymerization behavior of actin. Arg or His at 184 in H73E actin partially rescued the monomeric properties of H73E actin, as demonstrated by near-normal thermostability and wild-type (WT)-like protease digestion patterns. ATP exchange was still considerably faster than with WT-actin although slower than that of H73E alone. However, polymerization of H73E/D184R and H73E/D184H is worse than with H73E alone. Conversely, D179R rescued all monomeric properties of H73E to near WT values and largely restored polymerization rate and filament thermostability. These results and new simulations of G-actin in the "open" state underscore the importance of the His(73)-Asp(179) interaction and suggest that the open and not the closed state of yeast actin may be favored in the absence of the methyl group of His(73).

Role of the DNase-I-binding loop in dynamic properties of actin filament

Effects of proteolytic modifications of the DNase-I-binding loop (residues 39-51) in subdomain 2 of actin on F-actin dynamics were investigated by measuring the rates of the polymer subunit exchange with the monomer pool at steady state and of ATP hydrolysis associated with it, and by determination of relative rate constants for monomer addition to and dissociation from the polymer ends. Cleavage of actin between Gly-42 and Val-43 by protease ECP32 resulted in enhancement of the turnover rate of polymer subunits by an order of magnitude or more, in contrast to less than a threefold increase produced by subtilisin cleavage between Met-47 and Gly-48. Probing the structure of the modified actins by limited digestion with trypsin revealed a correlation between the increased F-actin dynamics and a change in the conformation of subdomain 2, indicating a more open state of the filament subunits relative to intact F-actin. The cleavage with trypsin and steady-state ATPase were cooperatively inhibited by phalloidin, with half-maximal effects at phalloidin to actin molar ratio of 1:8 and full inhibition at a 1:1 ratio. The results support F-actin models in which only the N-terminal segment of loop 39-51 is involved in monomer-monomer contacts, and suggest a possibility of regulation of actin dynamics in the cell through allosteric effects on this segment of the actin polypeptide chain.

ATPase activity and conformational changes in the regulation of actin

The eukaryotic microfilament system is regulated in part through the nucleotide- and cation-dependent conformation of the actin molecule. In this review, recent literature on the crystal and solution structures of actin and other actin-superfamily proteins is summarized. Furthermore, the structure of the nucleotide binding cleft is discussed in terms of the mechanism of ATP hydrolysis and P(i) release. Two distinct domain movements are suggested to participate in the regulation of actin. (1) High-affinity binding of Mg(2+) to actin induces a rearrangement of side chains in the nucleotide binding site leading to an increased ATPase activity and polymerizability, as well as a rotation of subdomain 2 which is mediated by the hydroxyl of serine-14. (2) Hydrolysis of ATP and subsequent release of inorganic phosphate lead to a butterfly-like opening of the actin molecule brought about by a shearing in the interdomain helix 135-150. These domain rearrangements modulate the interaction of actin with a variety of different proteins, and conversely, protein binding to actin can restrict these conformational changes, with ultimate effects on the assembly state of the microfilament system.

Probing the structure of F-actin: cross-links constrain atomic models and modify actin dynamics

Cross-links between protomers in F-actin can be used as a very sensitive probe of both the dynamics and structure of F-actin. We have characterized filaments formed from a previously described yeast actin Q41C mutant, where disulfide bonds can be formed between the Cys41 that is introduced into subdomain-2 and Cys374 on an adjacent protomer. We find that the distribution of cross-linked n-mers shows no cooperativity and corresponds to a random probability cross-linking reaction. The random distribution suggests that disulfide formation does not cause a significant perturbation of the F-actin structure. Consistent with this lack of perturbation, three-dimensional reconstructions of extensively cross-linked filaments, using a new approach to helical image analysis, show very small structural changes with respect to uncross-linked filaments. This finding is in conflict with refined models but in agreement with the original Holmes et al. model for F-actin. Under conditions where 94 % of the protomers are linked by disulfide bonds, the distribution of filament twist becomes more heterogeneous with respect to control filaments. A molecular model suggests that strain, introduced by the disulfide, is relieved by increasing the twist of the long-pitch actin helices. Disulfide formation makes yeast actin filaments approximately three times less flexible in terms of bending and similar, in this respect, to vertebrate skeletal muscle F-actin. These observations support previous reports that the rigidity of F-actin can be controlled by the position of subdomain-2, and that this region is more flexible in yeast F-actin than in skeletal muscle F-actin.

Two conformations of G-actin related to two conformations of F-actin

In summary, a number of different conformational states of F-actin have been described by several different laboratories. Crystal structures have revealed that an opening of the nucleotide-binding cleft, produced by a large rotation of subdomain 2, can occur in G-actin. We have shown that two crystal states of beta-actin, in an open and closed form, can provide a very good model for the conformational difference in F-actin between yeast the wild-type and a V159N mutant. This suggests that some of the dynamics associated with G-actin may provide insights into dynamic processes within the F-actin filament.

Functional specificity of actin isoforms

Actin, one of the main proteins of muscle and cytoskeleton, exists as a variety of highly conserved isoforms whose distribution in vertebrates is tissue-specific. Synthesis of specific actin isoforms is accompanied by their subcellular compartmentalization, with both processes being regulated by factors of cell proliferation and differentiation. Actin isoforms cannot substitute for each other, and the high-level synthesis of exogenous actins leads to alterations in cell organization and morphology. This indicates that the highly conserved actins are functionally specialized for the tissues in which they predominate. The first goal of this review is to analyze the data on the polymerizability of actin isoforms to show that cytoskeleton isoactins form less stable polymers than skeletal muscle actin. This difference correlates with the dynamics of actin microfilaments versus the stability of myofibrillar systems. The three-dimensional actin structure as well as progress in the analysis of conformational changes in both the actin monomer and the filament allows us to view the data on the structure and polymerization of isoactins in terms of structure-function relationships within the actin molecule. Most of the amino acid substitutions that distinguish actin isoforms are located apart from actin-actin contact sites in the polymer. We suggest that these substitutions can modulate the ability of actin monomers to form more or less stable polymers by long-range (allosteric) regulation of the contact sites.

Polymerization, three-dimensional structure and mechanical properties of Ddictyostelium versus rabbit muscle actin filaments

To assess more systematically functional differences among non-muscle and muscle actins and the effect of specific mutations on their function, we compared actin from Dictyostelium discoideum (D-actin) with actin from rabbit skeletal muscle (R-actin) with respect to the formation of filaments, their three-dimensional structure and mechanical properties. With Mg(2+) occupying the single high-affinity divalent cation-binding site, the course of polymerization is very similar for the two types of actin. In contrast, when Ca(2+ )is bound, D-actin exhibits a significantly longer lag phase at the onset of polymerization than R-actin. Crossover spacing and helical screw angle of negatively stained filaments are similar for D and R-F-actin filaments, irrespective of the tightly bound divalent cation. However, three-dimensional helical reconstructions reveal that the intersubunit contacts along the two long-pitch helical strands of D-(Ca)F-actin filaments are more tenuous compared to those in R-(Ca)F-actin filaments. D-(Mg)F-actin filaments on the other hand exhibit more massive contacts between the two long-pitch helical strands than R-(Mg)F-actin filaments. Moreover, in contrast to the structure of R-F-actin filaments which is not significantly modulated by the divalent cation, the intersubunit contacts both along and between the two long-pitch helical strands are weaker in D-(Ca)F-actin compared to D-(Mg)F-actin filaments. Consistent with these structural differences, D-(Ca)F-actin filaments were significantly more flexible than D-(Mg)F-actin. Taken together, this work documents that despite being highly conserved, muscle and non-muscle actins exhibit subtle differences in terms of their polymerization behavior, and the three-dimensional structure and mechanical properties of their F-actin filaments which, in turn, may account for their functional diversity.

A mutant of Arp2p causes partial disassembly of the Arp2/3 complex and loss of cortical actin function in fission yeast

The Arp2/3 complex is an essential component of the yeast actin cytoskeleton that localizes to cortical actin patches. We have isolated and characterized a temperature-sensitive mutant of Schizosaccharomyces pombe arp2 that displays a defect in cortical actin patch distribution. The arp2(+) gene encodes an essential actin-related protein that colocalizes with actin at the cortical actin patch. Sucrose gradient analysis of the Arp2/3 complex in the arp2-1 mutant indicated that the Arp2p and Arc18p subunits are specifically lost from the complex at restrictive temperature. These results are consistent with immunolocalization studies of the mutant that show that Arp2-1p is diffusely localized in the cytoplasm at restrictive temperature. Interestingly, Arp3p remains localized to the cortical actin patch under the same restrictive conditions, leading to the hypothesis that loss of Arp2p from the actin patch affects patch motility but does not severely compromise its architecture. Analysis of the mutant Arp2 protein demonstrated defects in ATP and Arp3p binding, suggesting a possible model for disruption of the complex.

Mutational analysis of Ser14 and Asp157 in the nucleotide-binding site of beta-actin

This paper compares wild-type and two mutant beta-actins, one in which Ser14 was replaced by a cysteine, and a second in which both Ser14 and Asp157 were exchanged (Ser14-->Cys and Ser14-->Cys, Asp157-->Ala, respectively). Both of these residues are part of invariant sequences in the loops, which bind the ATP phosphates, in the interdomain cleft of actin. The increased nucleotide exchange rate, and the decreased thermal stability and affinity for DNase I seen with the mutant actins indicated that the mutations disturbed the interdomain coupling. Despite this, the two mutant actins retained their ATPase activity. In fact, the mutated actins expressed a significant ATPase activity even in the presence of Ca2+ ions, conditions under which actin normally has a very low ATPase activity. In the presence of Mg2+ ions, the ATPase activity of actin was decreased slightly by the mutations. The mutant actins polymerized as the wild-type protein in the presence of Mg2+ ions, but slower than the wild-type in a K+/Ca2+ milieu. Profilin affected the lag phases and elongation rates during polymerization of the mutant and wild-type actins to the same extent, whereas at steady-state, the concentration of unpolymerized mutant actin appeared to be elevated. Decoration of mutant actin filaments with myosin subfragment 1 appeared to be normal, as did their movement in the low-load motility assay system. Our results show that Ser14 and Asp157 are key residues for interdomain communication, and that hydroxyl and carboxyl groups in positions 14 and 157, respectively, are not necessary for ATP hydrolysis in actin.

Correlation between polymerizability and conformation in scallop beta-like actin and rabbit skeletal muscle alpha-actin

In order to investigate the structural basis for functional differences among actin isoforms, we have compared the polymerization properties and conformations of scallop adductor muscle beta-like actin and rabbit skeletal muscle alpha-actin. Polymerization of scallop Ca(2+)-actin was slower than that of skeletal muscle Ca(2+)-actin. Cleavage of the actin polypeptide chain between Gly-42 and Val-43 with Escherichia coli protease ECP 32 impaired the polymerization of scallop Mg(2+)-actin to a greater extent than skeletal muscle Mg(2+)-actin. When monomeric scallop and skeletal muscle Ca(2+)-actins were subjected to limited proteolysis with trypsin, subtilisin, or ECP 32, no differences in the conformation of actin subdomain 2 were detected. At the same time, local differences in the conformations of scallop and skeletal muscle actin subdomains 1 were revealed as intrinsic fluorescence differences. Replacement of tightly bound Ca(2+) with Mg(2+) resulted in more extensive proteolysis of segment 61-69 of scallop actin than in the case of skeletal muscle actin. Furthermore, segment 61-69 was more accessible to proteolysis with subtilisin in polymerized scallop Ca(2+)-actin than in polymerized skeletal muscle Ca(2+)-actin, indicating that, in the polymeric form, the nucleotide-containing cleft is in a more open conformation in beta-like scallop actin than in skeletal muscle alpha-actin. We suggest that this difference between scallop and skeletal muscle actins is due to a less efficient shift of scallop actin subdomain 2 to the position it has in the polymer. The possible consequences of amino acid substitutions in actin subdomain 1 in the allosteric regulation of the actin cleft, and hence in the different stabilities of polymers formed by different actins, are discussed.

Water in actin polymerization

We have addressed the question whether water is part of the G- to F-actin polymerization reaction. Under osmotic stress, the critical concentration for G-Ca-ATP actin was reduced for six different osmolytes. These results are interpreted as showing that reducing water activity favored the polymerized state. The magnitude of the effect correlated, then saturated, with increasing MW of the osmolyte and suggested that up to 10-12 fewer water molecules were associated with actin when it polymerized. By contrast, osmotic effects were insignificant for Mg-ATP actin. The nucleotide binding site of the Mg conformation is more closed than the Ca and more closely resembles the closed actin conformation in the polymerized state. These results suggest that the water may come from the cleft of the nucleotide binding site.

New actin mutants allow further characterization of the nucleotide binding cleft and drug binding sites

We have generated 9 site-specific mutations in Saccharomyces cerevisiae actin. These mutants display a variety of phenotypes when expressed in vivo, including slow actin filament turnover, slow fluid-phase endocytosis, and defects in actin organization. Actin mutation D157E confers resistance to the actin-sequestering drug, latrunculin A. Latrunculin A inhibits nucleotide exchange on wild-type yeast actin but not on D157E actin, suggesting that this residue is part of the latrunculin A binding site. We have refined our earlier map of the phalloidin binding site on actin, demonstrating a requirement for residue G158 in addition to D179 and R177. The nine new actin mutants as well as a large collection of existing actin mutants were also used to identify the putative binding site of another actin binding drug, tolytoxin, on actin. The actin alleles that result in decreased sensitivity to this drug cluster at a site near the nucleotide-binding pocket. Actin purified from one of these mutants has a reduced affinity for tolytoxin. In addition, tolytoxin causes a 2.4-fold increase in the t1/2 of ATP exchange, further suggesting that this drug binds near the nucleotide-binding pocket of actin. We note that the binding sites for latrunculin A, phalloidin, and tolytoxin all map close to the actin nucleotide binding pocket.

A change in actin conformation associated with filament instability after Pi release

The ability of actin to both polymerize into filaments and to depolymerize permits the rapid rearrangements of actin structures that are essential for actin's function in most cellular processes. Filament polarity and dynamic properties are conferred by the hydrolysis of ATP on actin filaments. Release of inorganic phosphate (Pi) from filaments after ATP hydrolysis promotes depolymerization. We identify a yeast actin mutation, Val-159 to Asn, which uncouples Pi release from the conformational change that results in filament destabilization. Three-dimensional reconstructions of electron micrographs reveal a conformational difference between ADP-Pi filaments and ADP filaments and show that ADP V159N filaments resemble ADP-Pi wild-type filaments. Crystal structures of mammalian beta-actin in which the nucleotide binding cleft is in the "open" and "closed" states can be used to model actin filaments in the ADP and ADP-Pi conformations, respectively. We propose that these two conformations of G-actin may be related to two functional states of F-actin.

Differential epitope tagging of actin in transformed Drosophila produces distinct effects on myofibril assembly and function of the indirect flight muscle

We have tested the impact of tags on the structure and function of indirect flight muscle (IFM)-specific Act88F actin by transforming mutant Drosophila melanogaster, which do not express endogenous actin in their IFMs, with tagged Act88F constructs. Epitope tagging is often the method of choice to monitor the fate of a protein when a specific antibody is not available. Studies addressing the functional significance of the closely related actin isoforms rely almost exclusively on tagged exogenous actin, because only few antibodies exist that can discriminate between isoforms. Thereby it is widely presumed that the tag does not significantly interfere with protein function. However, in most studies the tagged actin is expressed in a background of endogenous actin and, as a rule, represents only a minor fraction of the total actin. The Act88F gene encodes the only Drosophila actin isoform exclusively expressed in the highly ordered IFM. Null mutations in this gene do not affect viability, but phenotypic effects in transformants can be directly attributed to the transgene. Transgenic flies that express Act88F with either a 6x histidine tag or an 11-residue peptide derived from vesicular stomatitis virus G protein at the C terminus were flightless. Overall, the ultrastructure of the IFM resembled that of the Act88F null mutant, and only low amounts of C-terminally tagged actins were found. In contrast, expression of N-terminally tagged Act88F at amounts comparable with that of wild-type flies yielded fairly normal-looking myofibrils and partially reconstituted flight ability in the transformants. Our findings suggest that the N terminus of actin is less sensitive to modifications than the C terminus, because it can be tagged and still polymerize into functional thin filaments.

Tubulin family: kinship of key proteins across phylogenetic domains

Atomic structures obtained by electron microscopy for tubulin, and by X-ray crystallography for bacterial FtsZ, show that the two proteins are highly homologous. The complementarity between such high-resolution studies and low-resolution reconstructions of microtubule complexes is clear, but controversy still abounds.

F-actin-binding proteins

The study of proteins that bind filamentous actin (F-actin) is entering an exciting stage as more and more structures are determined. After more than 50 years in which the focus was on muscle proteins, emphasis has recently shifted towards understanding the complex interplay among actin-binding molecules in non-muscle cells. To date, the binding sites for eight classes of filament-binding molecules have been determined by combining low- to intermediate-resolution maps obtained by electron microscopy with atomic structures determined by X-ray crystallography and NMR. Recent results have dramatically accentuated the importance of filament geometry and actin conformation in defining these interactions.

New angles on actin dynamics

Actin is now realised to play a dynamic role in muscle contraction and many cellular motility events that occur when the motor domain of myosin uses the energy of ATP hydrolysis to move along the actin filament. Optical and electron microscopic studies have led to seemingly contradictory pictures of actin filament dynamics.