Double-stacked dielectric resonator for sensitive EPR measurements

EPR UNIFORM FIELD SIGNAL ENHANCEMENT BY DIELECTRIC TUBES IN CAVITIES

The dielectric tube resonator (DTR) for EPR spectroscopy is introduced. It is defined as a metallic cylindrical TE011 microwave cavity that contains a dielectric tube centered on the axis of the cylinder. Contour plots of dimensions of the metallic cylinder to achieve resonance at 9.5 GHz are shown for quartz, sapphire, and rutile tubes as a function of wall thickness and average radius. These contour plots were developed using analytical equations and confirmed by finite element modeling. They can be used in two ways: design of the metallic cylinder for use at 9.5 GHz that incorporates a readily available tube such as a sapphire tube intended for NMR, or design of a custom procured tube for optimized performance for specific sample-size constraints. The charts extend to the limiting condition where the dielectric fills the tube. However, the structure at this limit is not a dielectric resonator due to the metal wall and does not radiate. In addition, the uniform field (UF) DTR is introduced. Development of the UF resonator starting with a dielectric tube resonator is shown. The diameter of the tube remains constant along the cavity axis, and the diameter of the cylindrical metallic enclosure increases at the ends of the cavity to satisfy the uniform field condition. This structure has advantages over the previously developed UF TE011 resonators: higher resonator efficiency parameter Λ, convenient overall size when using sapphire tubes, and higher quality data for small samples. The DTR and UF DTR structures fill the gap between free space and dielectric resonator limits in a continuous manner.

Visualization and characterization of pure and coupled modes in water-based dielectric resonators on a human 7T scanner

MRI represents a unique method to visualize directly different resonant modes of arbitrarily-shaped dielectric resonators in the radiofrequency spectrum via construction of resonators filled with distilled, deionized water which has a low conductivity and high relative permittivity. The required dimensions, particularly for higher order modes, are large and so a high field whole-body MRI system is needed to visualize these modes. In this study, using a simple cylindrical geometry, many higher order modes were identified and confirmed using electromagnetic simulations. In addition, coupled modes between more than one resonator were investigated, with possible future applications including direct visualization of fields in metamaterials.

Detection and imaging of superoxide in roots by an electron spin resonance spin-probe method

The detection, quantification, and imaging of short-lived reactive oxygen species, such as superoxide, in live biological specimens have always been challenging and controversial. Fluorescence-based methods are nonspecific, and electron spin resonance (ESR) spin-trapping methods require high probe concentrations and lack the capability for sufficient image resolution. In this work, a novel (to our knowledge), sensitive, small ESR imaging resonator was used together with a stable spin probe that specifically reacts with superoxide with a high reaction rate constant. This ESR spin-probe-based methodology was used to examine superoxide generated in a plant root as a result of an apical leaf injury. The results show that the spin probe rapidly permeated the plant's extracellular space. Upon injury of the plant tissue, superoxide was produced and the ESR signal decreased rapidly in the injured parts as well as in the distal part of the root. This is attributed to superoxide production and thus provides a means of quantifying the level of superoxide in the plant. The spin probe's narrow single-line ESR spectrum, together with the sensitive imaging resonator, facilitates the quantitative measurement of superoxide in small biological samples, such as the plant's root, as well as one-dimensional imaging along the length of the root. This type of methodology can be used to resolve many questions involving the production of apoplastic superoxide in plant biology.

High-sensitivity Q-band electron spin resonance imaging system with submicron resolution

A pulsed electron spin resonance (ESR) microimaging system operating at the Q-band frequency range is presented. The system includes a pulsed ESR spectrometer, gradient drivers, and a unique high-sensitivity imaging probe. The pulsed gradient drivers are capable of producing peak currents ranging from ∼9 A for short 150 ns pulses up to more than 94 A for long 1400 ns gradient pulses. Under optimal conditions, the imaging probe provides spin sensitivity of ∼1.6 × 10(8) spins∕√Hz or ∼2.7 × 10(6) spins for 1 h of acquisition. This combination of high gradients and high spin sensitivity enables the acquisition of ESR images with a resolution down to ∼440 nm for a high spin concentration solid sample (∼10(8) spins∕μm(3)) and ∼6.7 μm for a low spin concentration liquid sample (∼6 × 10(5) spins/μm(3)). Potential applications of this system range from the imaging of point defects in crystals and semiconductors to measurements of oxygen concentration in biological samples.

Analysis of two stacked cylindrical dielectric resonators in a TE₁₀₂ microwave cavity for magnetic resonance spectroscopy

The frequency, field distributions and filling factors of a DR/TE₁₀₂ probe, consisting of two cylindrical dielectric resonators (DR1 and DR2) in a rectangular TE₁₀₂ cavity, are simulated and analyzed by finite element methods. The TE(+++) mode formed by the in-phase coupling of the TE₀₁(δ)(DR1), TE₀₁(δ)(DR2) and TE₁₀₂ basic modes, is the most appropriate mode for X-band EPR experiments. The corresponding simulated B(+++) fields of the TE(+++) mode have significant amplitudes at DR1, DR2 and the cavity's iris resulting in efficient coupling between the DR/TE₁₀₂ probe and the microwave bridge. At the experimental configuration, B(+++) in the vicinity of DR2 is much larger than that around DR1 indicating that DR1 mainly acts as a frequency tuner. In contrast to a simple microwave shield, the resonant cavity is an essential component of the probe that affects its frequency. The two dielectric resonators are always coupled and this is enhanced by the cavity. When DR1 and DR2 are close to the cavity walls, the TE(+++) frequency and B(+++) distribution are very similar to that of the empty TE₁₀₂ cavity. When all the experimental details are taken into account, the agreement between the experimental and simulated TE(+++) frequencies is excellent. This confirms that the resonating mode of the spectrometer's DR/TE₁₀₂ probe is the TE(+++) mode. Additional proof is obtained from B₁(x), which is the calculated maximum x component of B(+++). It is predominantly due to DR2 and is approximately 4.4 G. The B₁(x) maximum value of the DR/TE₁₀₂ probe is found to be slightly larger than that for a single resonator in a cavity because DR1 further concentrates the cavity's magnetic field along its x axis. Even though DR1 slightly enhances the performance of the DR/TE₁₀₂ probe its main benefit is to act as a frequency tuner. A waveguide iris can be used to over-couple the DR/TE₁₀₂ probe and lower its Q to ≈150. Under these conditions, the probe has a short dead time and a large bandwidth. The DR/TE₁₀₂ probe's calculated conversion factor is approximately three times that of a regular cavity making it a good candidate for pulsed EPR experiments.

Sensitive surface loop-gap microresonators for electron spin resonance

This work presents the design, construction, and experimental testing of unique sensitive surface loop-gap microresonators for electron spin resonance (ESR) measurements. These resonators are made of "U"-shaped gold structures with typical sizes of 50 and 150 μm that are deposited on a thin (220 μm) rutile substrate and fed from the rear by a microstrip line. This allows accommodating a large flat sample above the resonator in addition to having variable coupling properties. Such resonators have a very small volume which, compared to previous designs, improves their absolute spin sensitivity by a factor of more than 2 (based on experimental results). They also have a very high microwave field-power conversion ratio of up to 86 gauss/√Hz. This could facilitate the use of very short excitation pulses with relatively low microwave power. Following the presentation and the discussion of the experimental results, ways to further increase sensitivity significantly are outlined.

High Q calcium titanate cylindrical dielectric resonators for magnetic resonance microimaging

At high magnetic fields radiation losses, wavelength effects, self-resonance, and the high resistance of typical components all contribute to increased losses in conventional RF coil designs. High permittivity ceramic dielectric resonators create strong uniform magnetic fields in a compact structure at high frequencies and can potentially solve some of the challenges of high field coil design. In this study an NMR probe was constructed for operation at 600 MHz (14.1T) using an inductively fed CaTiO(3) (relative permittivity of 156) cylindrical hollow bore dielectric resonator. The design has an unmatched Q value greater than 2000, and the electric field is largely confined to the dielectric itself, with near zero values in the hollow bore which accommodates the sample. Experimental and simulation mapping of the RF field show good agreement, with the ceramic resonator giving a pulse width approximately 25% less than a loop gap resonator of similar inner dimensions. High resolution images, with voxel dimensions less than 50 microm(3), have been acquired from fixed zebrafish samples, showing excellent delineation of several fine structures.

Resonant microwave cavity for 8.5-12 GHz optically detected electron spin resonance with simultaneous nuclear magnetic resonance

We present a newly developed microwave resonant cavity for use in optically detected magnetic resonance (ODMR) experiments. The cylindrical quasi-TE(011) mode cavity is designed to fit in a 1 in. magnet bore to allow the sample to be optically accessed and to have an adjustable resonant frequency between 8.5 and 12 GHz. The cavity uses cylinders of high dielectric material, so-called "dielectric resonators," in a double-stacked configuration to determine the resonant frequency. Wires in a pseudo-Helmholtz configuration are incorporated into the cavity to provide frequencies for simultaneous nuclear magnetic resonance (NMR). The system was tested by measuring cavity absorption as microwave frequencies were swept, by performing ODMR on a zinc-doped InP sample, and by performing optically detected NMR on a GaAs sample. The results confirm the suitability of the cavity for ODMR with simultaneous NMR.

New ceramic EPR resonators with high dielectric permittivity

New EPR resonators were developed by using a ceramic material with a high dielectric constant, epsilon=160. The resonators have a high quality factor, Q=10(3), and enhance the sensitivity of an EPR spectrometer up to 170 times. Some advantages of the new ceramic resonators are: (1) cheaper synthesis and simplified fabricating technology; (2) wider temperature range; and (3) ease of use. The ceramic material is produced with a titanate of complex oxides of rare-earth and alkaline metals, and has a perovskite type structure. The resonators were tested with X-band EPR spectrometers with cylindrical (TE(011)) and rectangular (TE(102)) cavities at 300 and 77K. We discovered that EPR signal strength enhancement depends on the dielectric constant of the material, resonator geometry and the size of the sample. Also, an unusual resonant mode was found in the dielectric resonator-metallic cavity structure. In this mode, the directions of microwave magnetic fields of the coupled resonators are opposite and the resonant frequency of the structure is higher than the frequency of empty metallic cavity.

Scaling of sensitivity and efficiency in planar microresonators for electron spin resonance

Electron spin resonance (ESR) of volume-limited samples or nanostructured materials can be made significantly more efficient by using microresonators whose size matches that of the structures under investigation. We describe a series of planar microresonators that show large improvements over conventional ESR resonators in terms of microwave conversion efficiency (microwave field strength for a given input power) and sensitivity (minimum number of detectable spins). We explore the dependence of these parameters on the size of the resonator and find that both scale almost linearly with the inverse of the resonator size. Scaling down the loops of the planar microresonators from 500 down to 20 mum improves the microwave efficiency and the sensitivity of these structures by more than an order of magnitude and reduces the microwave power requirements by more than two orders of magnitude.

Protein-cofactor interactions in bacterial reaction centers from Rhodobacter sphaeroides R-26: I. Identification of the ENDOR lines associated with the hydrogen bonds to the primary quinone QA*-

Hydrogen bonds are important in determining the structure and function of biomolecules. Of particular interest are hydrogen bonds to quinones, which play an important role in the bioenergetics of respiration and photosynthesis. In this work we investigated the hydrogen bonds to the two carbonyl oxygens of the semiquinone QA*- in the well-characterized reaction center from the photosynthetic bacterium Rhodobacter sphaeroides R-26. We used electron paramagnetic resonance and electron nuclear double resonance techniques at 35 GHz at a temperature of 80 K. The goal of this study was to identify and assign sets of 1H-ENDOR lines to protons hydrogen bonded to each of the two oxygens. This was accomplished by preferentially exchanging the hydrogen bond on one of the oxygens with deuterium while concomitantly monitoring the changes in the amplitudes of the 1H-ENDOR lines. The preferential deuteration of one of the oxygens was made possible by the different 1H --> 2H exchange times of the protons bonded to the two oxygens. The assignment of the 1H-ENDOR lines sets the stage for the determination of the geometries of the H-bonds by a detailed field selection ENDOR study to be presented in a future article.

Dielectric resonator-based resonant structure for sensitive ESR measurements at high-hydrostatic pressures

We present a newly developed microwave probe head that accommodates a gasketed sapphire anvil cell (SAC) for performing sensitive electron spin resonance (ESR) measurements under high-hydrostatic pressures. The system was designed around commercially available dielectric resonators (DRs) having the dielectric permittivity of approximately 30. The microwave resonant structure operates in a wide-stretched double-stacked geometry and resonates in the lowest cylindrical quasi TE(011) mode around 9.2 GHz. The most vital parts of the probe's microwave heart were made of plastic materials, thus making the resonant structure transparent to magnetic field modulation at 100 kHz. The overall ESR sensitivity of the probe was demonstrated for a small speck of 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) positioned in the gasket of the SAC, using water as the pressure-transmitting medium. The system was also used for studying pressure-induced changes in spin-relaxation mechanisms of a quasi-1D-conducting polymer, K(1)C(60). For small samples located in the sample hole of the gasket the probe reveals sensitivity that is only approximately 3 times less than that yielded by regular ESR cavities.

Planar microresonators for EPR experiments

EPR resonators on the basis of standing-wave cavities are optimised for large samples. For small samples it is possible to design different resonators that have much better power handling properties and higher sensitivity. Other parameters being equal, the sensitivity of the resonator can be increased by minimising its size and thus increasing the filling factor. Like in NMR, it is possible to use lumped elements; coils can confine the microwave field to volumes that are much smaller than the wavelength. We discuss the design and evaluation of EPR resonators on the basis of planar microcoils. Our test resonators, which operate at a frequency of 14 GHz, have excellent microwave efficiency factors, achieving 24 ns pi/2 EPR pulses with an input power of 17 mW. The sensitivity tests with DPPH samples resulted in the sensitivity value 2.3 x 10(9) spins.G(-1) Hz(-1/2) at 300 K.

The role of the periplasmic loop residue glutamine 65 for MscL mechanosensitivity

The periplasmic loop of MscL, the mechanosensitive channel of large conductance, acts as a spring resisting the opening of the channel. Recently, a high-throughput functional screening of a range of MscL structural mutants indicated that the substitution of residue glutamine (Q) 65 with arginine (R) or leucine (L) leads to a wild-type (WT)-like and a loss-of-function (LOF) phenotype, respectively. We used electron paramagnetic resonance (EPR) spectroscopy, single-channel recording and in vivo experiments to investigate further the effect of R and L mutation of Q65 on the gating mechanism of MscL. Structural analysis of Q65R and Q65L was carried out by coupling the site-directed spin labeling (SDSL) with EPR spectroscopy. A SDSL cysteine mutant of the isoleucine 24 residue (I24C-SL) in the first transmembrane domain, TM1, of MscL served as a reporter residue in EPR experiments. This was due to its strong spin-spin interaction with the neighboring I24C-SL residues in the MscL channel pentamer. The effects of bilayer incorporation of lysophosphatidylcholine on the MscL mutants were also investigated. Functional analysis was carried out using patch-clamp recordings from these mutants and WT MscL reconstituted into artificial liposomes. Although our data are largely in agreement with the high-throughput mutational analysis of Maurer and Dougherty, this study shows that Q65R and Q65L form functional channels and that these mutations lead to partial gain-of-function (GOF) and LOF mutation, respectively. Overall, our study confirms and advances the notion that the periplasmic loop plays a role in setting the channel mechanosensitivity.

An advanced EPR stopped-flow apparatus based on a dielectric ring resonator

A novel EPR stopped-flow accessory is described which allows time-dependent cw-EPR measurements of rate constants of reactions involving paramagnetic species after rapid mixing of two liquid reagents. The EPR stopped-flow design represents a state-of-the-art, computer controlled fluid driving system, a miniresonant EPR structure with an integrated small ball mixer, and a stopping valve. The X-band EPR detection system is an improved version of that reported by Sienkiewicz et al. [Rev. Sci. Instr. 65 (1994) 68], and utilizes a resonator with two stacked ceramic dielectric rings separated by a variable spacer. The resonator with the mode TE(H)011 is tailored particularly for conditions of fast flowing and rapidly stopped aqueous solutions, and for a high time resolution. The short distance between the ball mixer and the small EPR active volume (1.8 microl) yields a measured dead time of 330 micros. A compact assembly of all parts results in minimization of disturbing microphonics. The computer controlled driving system from BioLogic with two independent stepping motors was optimized for EPR stopped-flow with a hard-stop valve. Performance tests on the EPR spectrometer ESP 300E from BRUKER using redox reactions of nitroxide radicals revealed the EPR stopped-flow accessory as an advanced, versatile, and reliable instrument with high reproducibility.

Magnetic Field Dependence of Electron Spin Polarization Generated through Radical−Triplet Interactions

The magnetic field dependence of electron spin polarization (ESP), generated in free radicals when they encounter photoexcited triplets, was measured experimentally and analyzed theoretically. The time-resolved electron paramagnetic resonance measurements were performed with a microwave setup consisting of low-loss dielectric ring resonators with tunable microwave frequencies and the corresponding magnetic fields. The ESP of the radical was found in the magnetic field range of 170-370 mT, and the results of the calculation based on the numerical solution of the stochastic Liouville equation were found to be in line with the experimental data showing that ESP decreases when the magnetic field increases.

High resolution electron spin resonance microscopy

NMR microscopy is routinely employed in fields of science such as biology, botany, and materials science to observe magnetic parameters and transport phenomena in small scale structures. Despite extensive efforts, the resolution of this method is limited (>10 microm for short acquisition times), and thus cannot answer many key questions in these fields. We show, through theoretical prediction and initial experiments, that ESR microscopy, although much less developed, can improve upon the resolution limits of NMR, and successfully undertake the 1 mum resolution challenge. Our theoretical predictions demonstrate that existing ESR technology, along with advanced imaging probe design (resonator and gradient coils), using solutions of narrow linewidth radicals (the trityl family), should yield 64 x 64 pixels 2D images (with z slice selection) with a resolution of 1 x 1 x 10 microm at approximately 60 GHz in less than 1h of acquisition. Our initial imaging results, conducted by CW ESR at X-band, support these theoretical predictions and already improve upon the previously reported state-of-the-art for 2D ESR image resolution achieving approximately 10 x 10 mum, in just several minutes of acquisition time. We analyze how future progress, which includes improved resonators, increased frequency of measurement, and advanced pulsed techniques, should achieve the goal of micron resolution.

Enhanced EPR sensitivity from a ferroelectric cavity insert

We report the development of a simple ferroelectric cavity insert that increases the electron paramagnetic resonance (EPR) sensitivity by an order of magnitude when a sample is placed within it. The insert is a hollow cylinder (length 4.8 mm, outside diameter 1.7 mm, inside diameter 0.6 mm) made from a single crystal of KTaO(3), which has a dielectric constant of 230 at X-band (9.5 GHz). Its outside dimensions were chosen to produce a resonant frequency in the X-band range, based on electromagnetic field modeling calculations. The insert increases the microwave magnetic field (H(1)) at the center of the insert by a factor of 7.4 when placed in an X-band TM(110) cavity. This increases the EPR signal for a small (volume 0.13 microL) unsaturated nitroxide spin label sample by a factor of 64 at constant microwave power, and by a factor of 9.8 at constant H(1). The insert does not significantly affect the cavity quality factor Q, indicating that this device simply redistributes the microwave fields within the cavity, focusing H(1) onto the sample inside the insert, thus increasing the filling factor. A similar signal enhancement is obtained in the TM(110) and TE(102) cavities, and when the insert is oriented either vertically (parallel to the microwave field) or horizontally (parallel to the DC magnetic field) in the TM(110) cavity. This order-of-magnitude sensitivity enhancement allows EPR spectroscopy to be performed in conventional high-Q cavities on small EPR samples previously only measurable in loop-gap or dielectric resonators. This is of particular importance for small samples of spin-labeled biomolecules.

Dielectric resonator-based side-access probe for muscle fiber EPR study

We present a novel dielectric resonator (DR)-based resonant structure that accommodates aqueous sample capillaries in orientations that are either parallel (i.e., side-access) or perpendicular to the direction of an external (Zeeman) magnetic field, B(0). The resonant structure consists of two commercially available X-band DRs that are separated by a Rexolite spacer and resonate in the fundamental TE(01delta) mode. The separator between the DRs is used to tune the resonator to the desired frequency and, by appropriately drilled sample holes, to provide access for longitudinal samples, notably capillaries containing oriented, spin-labeled muscle fibers. In contrast to the topologically similar cylindrical TE(011) cavity, the DR-based structure has distinct microwave properties that favor its use for parallel orientation of lossy aqueous samples. For perpendicular orientation of a dilute (6.25 microM) aqueous solution of IASL spin label, the S/N ratio was at least one order of magnitude better for the side-access DR-based structure than for a standard TE(102) cavity. EPR spectra acquired for maleimide spin-labeled myosin filaments also revealed ca. 10 times better S/N ratio than those obtained with a standard TE(102) cavity. For the side-access DR with sample capillaries oriented either parallel or perpendicular to the external magnetic field, the Q- and filling factors are in good agreement with the theoretical estimates derived from the distribution of magnetic (H(1)) and electric (E(1)) components.

Dielectric resonator-based flow and stopped-flow EPR with rapid field scanning: A methodology for increasing kinetic information

We report methodology which combines recently developed dielectric resonator-based, rapid-mix, stopped-flow EPR (appropriate for small, aqueous, lossy samples) with rapid scanning of the external (Zeeman) magnetic field where the scanning is preprogrammed to occur at selected times after the start of flow. This methodology gave spectroscopic information complementary to that obtained by stopped-flow EPR at single fields, and with low reactant usage, it yielded more graphic insight into the time evolution of radical and spin-labeled species. We first used the ascorbyl radical as a test system where rapid scans triggered after flow was stopped provided "snapshots" of simultaneously evolving and interacting radical species. We monitored ascorbyl radical populations either as brought on by biologically damaging peroxynitrite oxidant or as chemically and kinetically interacting with a spectroscopically overlapping nitroxide radical. In a different biophysical application, where a spin-label lineshape reflected rapidly changing molecular dynamics of folding spin-labeled protein, rapid scan spectra were taken during flow with different flow rates and correspondingly different times after the mixing-induced inception of protein folding. This flow/rapid scan method is a means for monitoring early immobilization of the spin probe in the course of the folding process.