Chemosensors Based on Molecularly Imprinted Polymers

A fluorescence chemo sensor approach for determination of finerenone in pharmaceutical formulation and human plasma: Method development and validation

Finerenone, a non-steroidal mineralocorticoid receptor antagonist, has gained recent approval for treating cardiovascular and kidney-related conditions. Herein, an innovative fluorescence chemo sensor was developed for the determination of finerenone in the pharmaceutical dosage form and the plasma matrix. The method is basically based on chemical transformation of finerenone into a fluorescent product through sequential reactions. This transformation occurs through a sequence of steps involving the interaction of finerenone with trimethylamine, resulting in the formation of a nucleophilic intermediate that subsequently reacts with bromoacetyl bromide to form fluorescent product, (S)-N-(2-bromoacetyl)-4-(4-cyano-2-methoxyphenyl)-5-ethoxy-2,8-dimethyl-1,4-dihydro-1,6-naphthyridine-3-carboxamide. The formed fluorescent product exhibits defined emission peak at 338 nm when excited at 248 nm. Significant concentration-dependent fluorescence enhancement was obtained enabling precise finerenone determination in the pharmaceutical formulation and plasma matrix. The method was optimized and validated providing sensitive determination over linearity range of 1-200 ng/mL with a lower limit of detection at 0.280 ng/mL. This strategy provides an efficient, economical substitute and straightforward, more sensitive analytical method for finerenone assessment in various matrices, in contrast to the previously published method, high-performance liquid chromatography-tandem mass spectrometry, which is expensive and time-consuming.

Development of fluorescence chemo sensor for selective histamine determination in spiked human plasma samples

Histamine is crucial for controlling a variety of physiological processes and its dysregulation is linked to various pathological conditions, including allergic disorders, autoimmune diseases and inflammatory conditions. Herein, a novel fluorescence chemo sensor was produced to measure histamine in the pure form and spiked human plasma matrix. The proposed method is based on chemical transformation of histamine into a fluorescent product, N-(2-(1H-imidazol-4-yl) ethyl)-2-bromoacetamide, exhibiting unique fluorescence properties compared to non-fluorescent histamine molecule. This transformation occurs through a sequence of chemical reactions involving the interaction of histamine with trimethylamine, resulting in the formation of a nucleophilic intermediate that subsequently reacts with electrophilic bromoacetyl bromide. The transformed fluorescent product demonstrates an emission at 340 nm after being excited at 250 nm. Significant concentration-dependent fluorescence enhancement was obtained enabling histamine determination. The procedures were examined for accuracy, precision, selectivity, and robustness in line with the ICH M10 recommendations. The method exhibits a lower limit of quantification at 0.25 ng/mL and dynamic detection throughout a linearity range of 1-200 ng/mL, providing accurate assessment of histamine in the plasma matrix.

Self-Diagnostic Polymers-Inline Detection of Thermal Degradation of Unsaturated Poly(ester imide)s

Monitoring polymer degradation is an important quest, particularly relevant for industry. Although many indirect methodologies for assessing polymer degradation exist, only few are applicable for an inline-monitoring via optic detection-systems. An inline-monitoring system is introduced for the thermal degradation of crosslinked poly(ester imide)s (PEIs) by embedding trifluoroacetyl functionalized stilbene molecules, serving as chemosensors to track the release of generated alcoholic byproducts. Nucleophilic addition of an alcohol to the sensors trifluoroacetyl functionality triggers hemiacetal formation which is accompanied by significant changes in optical properties, in turn allowing monitoring of sensor activation by direct spectroscopy. Fluorescence spectroscopy offers an easy detection tool for the inline thermal monitoring of PEI-degradation.

Enantioselective hyperporous molecularly imprinted thin film polymers

Significant enantioselective recognition has been achieved through the introduction of long range ordered and highly interconnected 300 nm diameter pores in molecularly imprinted polymer matrices.

The Selectivity of Polymers Imprinted with Amines

One of the main reasons for making molecularly imprinted polymers (MIPs) has been that MIPs interact selectively with a specific target compound. This claim is investigated here with the example of a widely used type of noncovalent MIP, the MIP for the beta blocker propranolol. Adsorption isotherms of this MIP and of a nonimprinted control polymer (NIP), respectively, have been measured with a series of compounds in the porogen solvent acetonitrile. The results, visualized as “selectivity ladders”, show that the MIP binds propranolol and many other amines better than the NIP does, but the selectivity of the MIP is actually inferior to that of the NIP. The selectivity of either polymer for propranolol is modest against many amines, but is remarkable with respect to other compounds. The contribution of imprinting towards selectivity can be better appreciated when three MIPs, made with different amine templates, are compared among themselves. Each MIP is seen to bind its own template slightly better than the other two MIPs do. In media different from the porogen, the selectivity patterns may change substantially. Propranolol seems to have properties that make it stand high on the selectivity scale in different solvents, albeit for different reasons.

Molecular recognition by synthetic receptors: Application in field-effect transistor based chemosensing

Molecular recognition, i.e., ability of one molecule to recognize another through weak bonding interactions, is one of the bases of life. It is often implemented to sensing systems of high merits. Preferential recognition of the analyte (guest) by the receptor (host) induces changes in physicochemical properties of the sensing system. These changes are measured by using suitable signal transducers. Because of possibility of miniaturization, fast response, and high sensitivity, field-effect transistors (FETs) are more frequently being used for that purpose. A FET combined with a biological material offers the potential to overcome many challenges approached in sensing. However, low stability of biological materials under measurement conditions is a serious problem. To circumvent this problem, synthetic receptors were integrated with the gate surface of FETs to provide robust performance. In the present critical review, the approach utilized to devise chemosensors integrating synthetic receptors and FET transduction is discussed in detail. The progress in this field was summarized and important outcome was provided.

State-of-the-art applications of cyclodextrins as functional monomers in molecular imprinting techniques: a review

As a versatile tool in separation science, cyclodextrins and their derivatives, known as emerging functional monomers, have been used extensively in molecular imprinting techniques. The attributes of cyclodextrins and their derivatives are widely known to form host-guest inclusion complex processes between the polymer and template. The exploitation of the imprinting technique could produce a product of molecularly imprinted polymers, which are very robust with long-term stability, reliability, cost-efficiency, and selectivity. Hence, molecularly imprinted polymers have gained popularity in chemical separation and analysis. Molecularly imprinted polymers containing either cyclodextrin or its derivatives demonstrate superior binding effects for a target molecule. As noted in the previous studies, the functional monomers of cyclodextrins and their derivatives have been used in molecular imprinting for selective separation with a wide range of chemical compounds, including steroidals, amino acids, polysaccharides, drugs, plant hormones, proteins, pesticides, and plastic additives. Therefore, the main goal of this review is to illustrate the exotic applications of imprinting techniques employing cyclodextrins and their derivatives as single or binary functional monomers in synthesizing molecularly imprinted polymers in areas of separation science by reviewing some of the latest studies reported in the literature.

Rapid Prototyping of Chemical Microsensors Based on Molecularly Imprinted Polymers Synthesized by Two-Photon Stereolithography

Two-photon stereolithography is used for rapid prototyping of submicrometre molecularly imprinted polymer-based 3D structures. The structures are evaluated as chemical sensing elements and their specific recognition properties for target molecules are confirmed. The 3D design capability is exploited and highlighted through the fabrication of an all-organic molecularly imprinted polymeric microelectromechanical sensor.

Molecularly imprinted polymers for the analysis and removal of polychlorinated aromatic compounds in the environment: a review

Molecularly imprinted polymers selective to polychlorinated aromatic compounds for application in environmental studies.

Molecularly imprinted polymers for separating and sensing of macromolecular compounds and microorganisms

The present review article focuses on gathering, summarizing, and critically evaluating the results of the last decade on separating and sensing macromolecular compounds and microorganisms with the use of molecularly imprinted polymer (MIP) synthetic receptors. Macromolecules play an important role in biology and are termed that way to contrast them from micromolecules. The former are large and complex molecules with relatively high molecular weights. The article mainly considers chemical sensing of deoxyribonucleic acids (DNAs), proteins and protein fragments as well as sugars and oligosaccharides. Moreover, it briefly discusses fabrication of chemosensors for determination of bacteria and viruses that can ultimately be considered as extremely large macromolecules.

Aflatoxin B1 Detection Using a Highly-Sensitive Molecularly-Imprinted Electrochemical Sensor Based on an Electropolymerized Metal Organic Framework

A sensitive electrochemical molecularly-imprinted sensor was developed for the detection of aflatoxin B1 (AFB1), by electropolymerization of p-aminothiophenol-functionalized gold nanoparticles in the presence of AFB1 as a template molecule. The extraction of the template leads to the formation of cavities that are able to specifically recognize and bind AFB1 through π-π interactions between AFB1 molecules and aniline moities. The performance of the developed sensor for the detection of AFB1 was investigated by linear sweep voltammetry using a hexacyanoferrate/hexacyanoferrite solution as a redox probe, the electron transfer rate increasing when the concentration of AFB1 increases, due to a p-doping effect. The molecularly-imprinted sensor exhibits a broad linear range, between 3.2 fM and 3.2 µM, and a quantification limit of 3 fM. Compared to the non-imprinted sensor, the imprinting factor was found to be 10. Selectivity studies were also performed towards the binding of other aflatoxins and ochratoxin A, proving good selectivity.

Experimental mixture design as a tool for the synthesis of antimicrobial selective molecularly imprinted monodisperse microbeads

The effect of the cross-linker on the shape and size of molecular imprinted polymer (MIP) beads prepared by precipitation polymerization has been evaluated using a chemometric approach. Molecularly imprinted microspheres for the selective recognition of fluoroquinolone antimicrobials were prepared in a one-step precipitation polymerization procedure using enrofloxacin (ENR) as the template molecule, methacrylic acid as functional monomer, 2-hydroxyethyl methacrylate as hydrophilic comonomer, and acetonitrile as the porogen. The type and amount of cross-linker, namely ethylene glycol dimethacrylate, divinylbenzene or trimethylolpropane trimethacrylate, to obtain monodispersed MIP spherical beads in the micrometer range was optimized using a simplex lattice design. Particle size and morphology were assessed by scanning electron microscopy, dynamic light scattering, and nitrogen adsorption measurements. Electron paramagnetic resonance spectroscopy in conjunction with a nitroxide as spin probe revealed information about the microviscosity and polarity of the binding sites in imprinted and nonimprinted polymer beads.

All-organic microelectromechanical systems integrating specific molecular recognition--a new generation of chemical sensors

Cantilever-type all-organic microelectromechanical systems based on molecularly imprinted polymers for specific analyte recognition are used as chemical sensors. They are produced by a simple spray-coating-shadow-masking process. Analyte binding to the cantilever generates a measurable change in its resonance frequency. This allows label-free detection by direct mass sensing of low-molecular-weight analytes at nanomolar concentrations.

Molecular recognition with nanostructures fabricated by photopolymerization within metallic subwavelength apertures

The first demonstration of fabrication of submicron lateral resolution molecularly imprinted polymer (MIP) patterns by photoinduced local polymerization within metal subwavelength apertures is reported. The size of the photopolymerized MIP features is finely tuned by the dose of 532 nm radiation. Rhodamine 123 (R123) has been selected as a fluorescent model template to prove the recognition capability of the MIP nanostructures, which has been evaluated by fluorescence lifetime imaging microscopy (FLIM) with single photon timing measurements. The binding selectivity provided by the imprinting effect has been confirmed in the presence of compounds structurally related to R123. These results pave the way to the development of nanomaterial architectures with biomimetic artificial recognition properties for environmental, clinical and food testing.

Fullerene derived molecularly imprinted polymer for chemosensing of adenosine-5'-triphosphate (ATP)

For molecular imprinting of oxidatively electroactive analytes by electropolymerization, we used herein reductively electroactive functional monomers. As a proof of concept, we applied C60 fullerene adducts as such for the first time. For that, we derivatized C60 to bear either an uracil or an amide, or a carboxy addend for recognition of the adenosine-5'-triphosphate (ATP) oxidizable analyte with the ATP-templated molecularly imprinted polymer (MIP-ATP). Accordingly, the ATP complex with all of the functional monomers formed in solution was potentiodynamically electropolymerized to deposit an MIP-ATP film either on an Au electrode of the quartz crystal resonator or on a Pt disk electrode for the piezoelectric microgravimetry (PM) or capacitive impedimetry (CI) determination of ATP, respectively, under the flow-injection analysis (FIA) conditions. The apparent imprinting factor for ATP was ∼4.0. After extraction of the ATP template, analytical performance of the resulting chemosensors, including detectability, sensitivity, and selectivity, was characterized. The limit of detection was 0.3 and 0.03mM ATP for the PM and CI chemosensor, respectively. The MIP-ATP film discriminated structural analogues of ATP quite well. The Langmuir, Freundlich, and Langmuir-Freundlich isotherms were fitted to the experimental data of the ATP sorption and sorption stability constants appeared to be nearly independent of the adopted sorption model.

Sensing of glycoprotein via a biomimetic sensor based on molecularly imprinted polymers and graphene-Au nanoparticles

A novel strategy was proposed for preparing a highly sensitive glycoprotein sensor based on molecularly imprinted polymers (MIP), which was electropolymerized with o-phenylenediamine and 3-aminophenylboronic acid monohydrate in the presence of template molecules (bovine serum albumin (BSA)). Sensitivity improved dramatically owing to the application of a graphene-Au nanoparticles hybrid as the electrode modifier, and the immobilization of a large amount of 6-ferrocenylhexanethiol, as the electroactive species, onto nanoparticles. The quantification of BSA was realized by detecting the electrochemical oxidation signal of 6-ferrocenylhexanethiol, which was bonded onto the electrode. Under optimized conditions, a good relationship was obtained between the response current and logarithm of BSA concentration in the range of 1.0 × 10(-11) to 1.0 × 10(-5) g mL(-1) with a detection limit of 7.5 × 10(-12) g mL(-1) (S/N = 3). The resulting MIP sensor displayed good selectivity, reproducibility and stability.

Hierarchical Thin Film Architectures for Enhanced Sensor Performance: Liquid Crystal-Mediated Electrochemical Synthesis of Nanostructured Imprinted Polymer Films for the Selective Recognition of Bupivacaine

Nanostructured bupivacaine-selective molecularly imprinted 3-aminophenylboronic acid-p-phenylenediamine co-polymer (MIP) films have been prepared on gold-coated quartz (Au/quartz) resonators by electrochemical synthesis under cyclic voltammetric conditions in a liquid crystalline (LC) medium (triton X-100/water). Films prepared in water and in the absence of template were used for control studies. Infrared spectroscopic studies demonstrated comparable chemical compositions for LC and control polymer films. SEM studies revealed that the topologies of the molecularly imprinted polymer films prepared in the LC medium (LC-MIP) exhibit discernible 40 nm thick nano-fiber structures, quite unlike the polymers prepared in the absence of the LC-phase. The sensitivity of the LC-MIP in a quartz crystal microbalance (QCM) sensor platform was 67.6 ± 4.9 Hz/mM under flow injection analysis (FIA) conditions, which was ≈250% higher than for the sensor prepared using the aqueous medium. Detection was possible at 100 nM (30 ng/mL), and discrimination of bupivacaine from closely related structural analogs was readily achieved as reflected in the corresponding stability constants of the MIP-analyte complexes. The facile fabrication and significant enhancement in sensor sensitivity together highlight the potential of this LC-based imprinting strategy for fabrication of polymeric materials with hierarchical architectures, in particular for use in surface-dependent application areas, e.g., biomaterials or sensing.

Biotin selective polymer nano-films

Background

The interaction between biotin and avidin is utilized in a wide range of assay and diagnostic systems. A robust material capable of binding biotin should offer scope in the development of reusable assay materials and biosensor recognition elements.

Results

Biotin-selective thin (3–5 nm) films have been fabricated on hexadecanethiol self assembled monolayer (SAM) coated Au/quartz resonators. The films were prepared based upon a molecular imprinting strategy where N,N'-methylenebisacrylamide and 2-acrylamido-2-methylpropanesulfonic acid were copolymerized and grafted to the SAM-coated surface in the presence of biotin methyl ester using photoinitiation with physisorbed benzophenone. The biotinyl moiety selectivity of the resonators efficiently differentiated biotinylated peptidic or carbohydrate structures from their native counterparts.

Conclusions

Molecularly imprinted ultra thin films can be used for the selective recognition of biotinylated structures in a quartz crystal microbalance sensing platform. These films are stable for periods of at least a month. This strategy should prove of interest for use in other sensing and assay systems.

Supercritical CO2-assisted synthesis of an ultrasensitive amphibious quantum dot-molecularly imprinted sensor

A green supercritical CO₂-assisted molecular imprinting protocol enabled the production of smart sensory particles, incorporating quantum dots, with molecular recognition to bisphenol A at very low concentrations (4 nM).

Molecularly imprinted polymer for recognition of 5-fluorouracil by RNA-type nucleobase pairing

A 6-aminopurine (adenine) derivative of bis(2,2'-bithienyl)methane, vis., 4-[2-(6-amino-9H-purin-9-yl)ethoxy]phenyl-4-[bis(2,2'-bithienyl)methane] or Ade-BTM, was designed and synthesized for recognition of 5-fluorouracil (FU), an antitumor chemotherapy agent, by RNA-type (nucleobase pairing)-driven molecular imprinting. The prepolymerization complex stoichiometry involved one FU molecule and two molecules of the Ade-BTM functional monomer. Molecular structure of this complex was thermodynamically optimized via density functional theory at the B3LYP/3-21G* level. The stability constant of the FU-Ade-BTM complex of 1:2 stoichiometry was K = 2.17(±0.07) × 10(7) M(-2), as determined by titration with quenching of fluorescence of the bis(2,2'-bithienyl)methane moiety of Ade-BTM by the FU titrant, in benzonitrile, at 352 nm excitation. Next, (5-fluorouracil)-templated molecularly imprinted polymer (MIP-FU) films were deposited on indium-tin oxide (ITO) or Au film-coated glass slides, Pt disk electrodes, or 10-MHz quartz crystal resonators by potentiodynamic electropolymerization from solution of FU, Ade-BTM, and tris([2,2'-bithiophen]-5-yl)methane (TTM) cross-linking monomer at FU:Ade-BTM:TTM = 1:2:3 mol ratio. Then UV-visible and Fourier transform infrared (FT-IR) spectra of the MIP-FU films were recorded to confirm the FU template presence in the MIP-FU film and its subsequent release by extraction with methanol from this film. For determination of the stability constant of the complex of the MIP cavity and FU, piezoelectric microgravimetry (PM) under both batch- and flow-injection analysis conditions was used. For sensing application, three different transduction platforms [differential pulse voltammetry (DPV), capacitive impedimetry (CI), and PM] were integrated with the MIP-FU recognition unit. The limit of detection (LOD) was 56 nM, 75 nM, and 0.26 mM, for these chemosensors, respectively, indicating suitability of the former two for FU determination in blood plasma or serum (~500 nM). Moreover, the CI chemosensor was appreciably more sensitive to FU than to their common interferences.

Electrochemically synthesized molecularly imprinted polymer of thiophene derivatives for flow-injection analysis determination of adenosine-5'-triphosphate (ATP)

Two selective chemosensors for adenosine-5'-triphosphate (ATP) determination featuring molecularly imprinted polymer (MIP) film recognition units were fabricated. For imprinting, three different thiophene derivatives were used as functional monomers. That is, the uracil substituent of bis(2,2'-bithienyl)methane 2 complementarily H-bond paired the adenine moiety of ATP, the boronic acid substituent of thiophene 3 covalently bound vicinal diols of the ribofuranose moiety, and amide substituents of bis(2,2'-bithienyl)methanes 4 bound to the pyrophosphate moieties. Different binding motifs adopted for the ATP recognition and the structure of the supramolecular pre-polymerization complex were optimized with the DFT computing at the B3LYP/3-21G((*)) level. MIP films were prepared by potentiodynamic electropolymerization of this complex with the imprinting factor of 9.47±0.2. An analytical signal was transduced with a 10-MHz resonator of EQCM and a Pt electrode for the piezoelectric microgravimetry (PM) and capacitive impedometry (CI) determination of ATP, respectively, under FIA conditions. Analytical properties of the MIP film were unraveled by spectroscopic ellipsometry, XPS, IRRAS, and DPV. The limit of detection was 0.1 and 0.2 μM for the PM and CI chemosensor, respectively, being an order of magnitude lower than the ATP concentration in biological systems. Moreover, cross-selectivity was demonstrated with the adenosine-5'-diphosphate (ADP) imprinting and ATP discrimination.

Electrochemically synthesized polymers in molecular imprinting for chemical sensing

This critical review describes a class of polymers prepared by electrochemical polymerization that employs the concept of molecular imprinting for chemical sensing. The principal focus is on both conducting and nonconducting polymers prepared by electropolymerization of electroactive functional monomers, such as pristine and derivatized pyrrole, aminophenylboronic acid, thiophene, porphyrin, aniline, phenylenediamine, phenol, and thiophenol. A critical evaluation of the literature on electrosynthesized molecularly imprinted polymers (MIPs) applied as recognition elements of chemical sensors is presented. The aim of this review is to highlight recent achievements in analytical applications of these MIPs, including present strategies of determination of different analytes as well as identification and solutions for problems encountered.

Molecular recognition of the antiretroviral drug abacavir: towards the development of a novel carbazole-based fluorosensor

Due to their optical and electro-conductive attributes, carbazole derivatives are interesting materials for a large range of biosensor applications. In this study, we present the synthesis routes and fluorescence evaluation of newly designed carbazole fluorosensors that, by modification with uracil, have a special affinity for antiretroviral drugs via either Watson–Crick or Hoogsteen base pairing. To an N-octylcarbazole-uracil compound, four different groups were attached, namely thiophene, furane, ethylenedioxythiophene, and another uracil; yielding four different derivatives. Photophysical properties of these newly obtained derivatives are described, as are their interactions with the reverse transcriptase inhibitors such as abacavir, zidovudine, lamivudine and didanosine. The influence of each analyte on biosensor fluorescence was assessed on the basis of the Stern–Volmer equation and represented by Stern–Volmer constants. Consequently we have demonstrated that these structures based on carbazole, with a uracil group, may be successfully incorporated into alternative carbazole derivatives to form biosensors for the molecular recognition of antiretroviral drugs.