Analysis of soybean chloroplast DNA replication by two-dimensional gel electrophoresis

Targeted inactivation of the tobacco plastome origins of replication A and B

According to the Kolodner and Tewari model [Kolodner, R.D. and Tewari, K.K. (1975) Nature, 256, 708.], plastid DNA replication involves displacement-loop and rolling-circle modes of replication, which are initiated on a pair of origins of replication (ori). In accordance with the model, such a pair of oris -oriA and oriB- was described in Nicotiana tabacum [Kunnimalaiyaan, M. and Nielsen B.L. (1997b) Nucl. Acids Res. 25, 3681.]. However, as reported previously, both copies of oriA can be deleted without abolishing replication. Deletion of both oriBs was not found [Mühlbauer, S.K. et al. (2002) Plant J. 32, 175.]. Here we describe new ori inactivation lines, in which one oriB is deleted and the other copy is strongly mutated. In addition, lines oriA and oriB were deleted from the same inverted repeat. In contrast to the expectations of the model, neither oriA nor oriB is essential. Some of the deletions led to reduced growth of plants and reduced plastid DNA copy number in later stages of leaf development. The gross structure of plastid DNA was unchanged; however, the location of the ends of branched plastid DNA complexes was different in the inactivation mutants. Taken together, the results indicate that there are additional mechanisms of plastid DNA replication and/or additional origins of replication. These mechanisms seem to be different from those found in eubacteria, which, according to the endosymbiont theory, are the progenitors of plastids.

Linear molecules of tobacco ptDNA end at known replication origins and additional loci

Higher plant plastid DNA (ptDNA) is generally described as a double-stranded circular molecule of the size of the monomer of the plastid genome. Also, the substrates and products of ptDNA replication are generally assumed to be circular molecules. Linear or partly linear ptDNA molecules were detected in our present study using pulsed-field gel electrophoresis and Southern blotting of ptDNA restricted with 'single cutter' restriction enzymes. These linear DNA molecules show discrete end points which were mapped using appropriate probes. One possible explanation of discrete ends would be that they represent origins of replication. Indeed, some of the mapped ends correlate well with the known origins of replication of tobacco plastids, i.e. both of the oriA sequences and--less pronouncedly--with the oriB elements. Other ends correspond to replication origins that were described for Oenothera hookeri, Zea mays, Glycine max and Chlamydomonas reinhardtii, respectively, while some of the mapped ends were not described previously and might therefore represent additional origins of replication.

Stable transformation of the cotton plastid genome and maternal inheritance of transgenes

Chloroplast genetic engineering overcomes concerns of gene containment, low levels of transgene expression, gene silencing, positional and pleiotropic effects or presence of vector sequences in transformed genomes. Several therapeutic proteins and agronomic traits have been highly expressed via the tobacco chloroplast genome but extending this concept to important crops has been a major challenge; lack of 100 homologous species-specific chloroplast transformation vectors containing suitable selectable markers, ability to regulate transgene expression in developing plastids and inadequate tissue culture systems via somatic embryogenesis are major challenges. We employed a 'Double Gene/Single Selection (DGSS)' plastid transformation vector that harbors two selectable marker genes (aph A-6 and npt II) to detoxify the same antibiotic by two enzymes, irrespective of the type of tissues or plastids; by combining this with an efficient regeneration system via somatic embryogenesis, cotton plastid transformation was achieved for the first time. The DGSS transformation vector is at least 8-fold (1 event/2.4 bombarded plates) more efficient than 'Single Gene/Single Selection (SGSS)' vector (aph A-6; 1 event per 20 bombarded plates). Chloroplast transgenic lines were fertile, flowered and set seeds similar to untransformed plants. Transgenes stably integrated into the cotton chloroplast genome were maternally inherited and were not transmitted via pollen when out-crossed with untransformed female plants. Cotton is one of the most important genetically modified crops (120 billion US dollars US annual economy). Successful transformation of the chloroplast genome should address concerns about transgene escape, insects developing resistance, inadequate insect control and promote public acceptance of genetically modified cotton.

The plastid DNA of the malaria parasite Plasmodium falciparum is replicated by two mechanisms

In common with other apicomplexan parasites, Plasmodium falciparum, a causative organism of human malaria, harbours a residual plastid derived from an ancient secondary endosymbiotic acquisition of an alga. The function of the 35 kb plastid genome is unknown, but its evolutionary origin and genetic content make it a likely target for chemotherapy. Pulsed field gel electrophoresis and ionizing radiation have shown that essentially all the plastid DNA comprises covalently closed circular monomers, together with a tiny minority of linear 35 kb molecules. Using two-dimensional gels and electron microscopy, two replication mechanisms have been revealed. One, sensitive to the topoisomerase inhibitor ciprofloxacin, appears to initiate at twin D-loops located in a large inverted repeat carrying duplicated rRNA and tRNA genes, whereas the second, less drug sensitive, probably involves rolling circles that initiate outside the inverted repeat.

In vitro replication of mitochondrial plasmid mp1 from the higher plant Chenopodium album (L.): a remnant of bacterial rolling circle and conjugative plasmids?

According to the endosymbiotic theory, mitochondrial genomes evolved from the chromosome of an alpha-proteobacterium-like ancestor and developed during evolution an extraordinary variation in size, structure and replication. We studied in vitro DNA replication of the mitochondrial circular plasmid mp1 (1309 bp) from the higher plant Chenopodium album (L.) as a model system that replicates in a manner reminiscent of bacterial rolling circle plasmids. Several mp1 subclones were tested for their ability to support DNA replication using a newly developed in vitro system. Neutral/neutral two-dimensional gel electrophoresis of the in vitro products revealed typical simple Y patterns of intermediates consistent with a rolling circle type of replication. Replication activity was very high for a BamHI-restricted total plasmid DNA clone, a 464 bp BamHI/KpnI fragment and a 363 bp BamHI/SmaI fragment. Further subcloning of a 148 bp BamHI/EcoRI fragment resulted in the strongest in vitro DNA replication activity, while a 1161 bp-template outside of this region resulted in a substantial loss of activity. Electron microscopic studies of in vitro DNA replication products from the highly active clones also revealed sigma-shaped molecules. These results support our in vivo data for the presence of a predominant replication origin between positions 628 and 776 on the plasmid map. This sequence shares homology with double-stranded rolling circle origin (dso) or transfer origin (oriT) nicking motifs from bacterial plasmids. mp1 is the first described rolling circle plasmid in eukaryotes.

Fine mapping of replication origins (ori A and ori B) in Nicotiana tabacum chloroplast DNA

Using a partially purified replication complex from tobacco chloroplasts, replication origins have been localized to minimal sequences of 82 (pKN8, positions 137 683-137 764) and 243 bp (pKN3, positions 130 513-130 755) for ori A and ori B respectively. Analysis of in vitro replication products by two-dimensional agarose gel electrophoresis showed simple Y patterns for single ori sequence-containing clones, indicative of rolling circle replication. Double Y patterns were observed when a chloroplast DNA template containing both ori s (pKN9) was tested. Dpn I analysis and control assays with Escherichia coli DNA polymerase provide a clear method to distinguish between true replication and DNA repair synthesis. These controls also support the reliability of this in vitro chloroplast DNA replication system. EM analysis of in vitro replicated products showed rolling circle replication intermediates for single ori clones (ori A or ori B), whereas D loops were observed for a clone (pKN9) containing both ori s. The minimal ori regions contain sequences which are capable of forming stem-loop structures with relatively high free energy and other sequences which interact with specific protein(s) from the chloroplast replication fraction. Apparently the minimal ori sequences reported here contain all the necessary elements for support of chloroplast DNA replication in vitro.

Analysis of the tobacco chloroplast DNA replication origin (oriB) downstream of the 23 S rRNA gene

We have mapped the origin of DNA replication (oriB) downstream of the 23 S rRNA gene in each copy of the inverted repeat (IR) of tobacco chloroplast DNA between positions 130,502 and 131,924 (IR(A)) by a combination of approaches. In vivo chloroplast DNA replication intermediates were examined by two-dimensional agarose gel electrophoresis. Extended arc patterns suggestive of replication intermediates containing extended single-stranded regions were observed with the 4.29 kb SspI fragment and an overlapping EcoRI fragment from one end of the inverted repeat, while only simple Y patterns were observed with a 3.92 kb BamHI-KpnI fragment internal to the SspI fragment. Other restriction fragments of tobacco chloroplast DNA besides those at the oriA region also generated only simple Y patterns in two-dimensional agarose gels. Several chloroplast DNA clones from this region were tested for their ability to support in vitro DNA replication using a partially purified chloroplast protein fraction. Templates with a deletion of 154 bp from the SspI to the BamHI sites near the end of the inverted repeat resulted in a considerable loss of in vitro DNA replication activity. These results support the presence of a replication origin at the end of the inverted repeat. The 5' end of nascent DNA from the replication displacement loop was identified at position 130,697 for IR(A) (111,832 for IR(B)) by primer extension. A single major product insensitive to alkali and RNase treatment was observed and mapped to the base of a stem-loop structure which contains one of two neighboring BamHI sites near the end of each inverted repeat. This provides the first precise determination of the start site of DNA synthesis from oriB. Adjacent DNA fragments containing the stem-loop structure and the 5' region exhibit sequence-specific gel mobility shift activity when incubated with the replication protein fraction, suggesting the presence of multiple binding sites.

Unique features of the mitochondrial rolling circle-plasmid mp1 from the higher plant Chenopodium album (L.)

We analyzed the structure and replication of the mitochondrial (mt) circular DNA plasmid mp1 (1309 bp) from the higher plant Chenopodium album(L.). Two dimensional gel electrophoresis (2DE) revealed the existence of oligomers of up to a decamer in addition to the prevailing monomeric form. The migration behavior of cut replication intermediates during 2DE was consistent with a rolling circle (RC) type of replication. We detected entirely single-stranded (ss) plasmid copies hybridizing only with one of the two DNA strands. This result indicates the occurence of an asymmetric RC replication mechanism. mp1 has, with respect to its replication, some unique features compared with bacterial RC plasmids. We identified and localized a strand-specific nicking site (origin of RC replication) on the plasmid by primer extension studies. Nicks in the plasmid were found to occur at any one of six nucleotides (TAAG/GG) around position 735 of the leading strand. This sequence shows no homology to origin motifs from known bacterial RC replicons. mp1 is the first described RC plasmid in a higher plant.

Characterization of replication origins flanking the 23S rRNA gene in tobacco chloroplast DNA

Using 5' end-labeled nascent strands of tobacco chloroplast DNA (ctDNA) as a probe, replication displacement loop (D-loop) regions were identified. The strongest hybridization was observed with restriction fragments containing the rRNA genes from the inverted repeat region. Two-dimensional gel analysis of various digests of tobacco ctDNA suggested that a replication origin is located near each end of the 7.1 kb BamHI fragment containing part of the rRNA operon. Analysis of in vitro replication products indicated that templates from either of the origin regions supported replication, while the vector alone or ctDNA clones from other regions of the genome did not support in vitro replication. Sequences from both sides of the BamHI site in the rRNA spacer region were required for optimal in vitro DNA replication activity. Primer extension was used for the first time to identify the start site of DNA synthesis for the D-loop in the rRNA spacer region. The major 5' end of the D-loop was localized to the base of a stem-loop structure which contains the rRNA spacer BamHI site. Primer extension products were insensitive to both alkali and RNase treatment, suggesting that RNA primers had already been removed from the 5' end of nascent DNA. Location of an origin in the rRNA spacer region of ctDNA from tobacco, pea and Oenothera suggests that ctDNA replication origins may be conserved in higher plants.