pac sites are indispensable for in vivo packaging of DNA by phage P22

Viral Small Terminase: A Divergent Structural Framework for a Conserved Biological Function

The genome packaging motor of bacteriophages and herpesviruses is built by two terminase subunits, known as large (TerL) and small (TerS), both essential for viral genome packaging. TerL structure, composition, and assembly to an empty capsid, as well as the mechanisms of ATP-dependent DNA packaging, have been studied in depth, shedding light on the chemo-mechanical coupling between ATP hydrolysis and DNA translocation. Instead, significantly less is known about the small terminase subunit, TerS, which is dispensable or even inhibitory in vitro, but essential in vivo. By taking advantage of the recent revolution in cryo-electron microscopy (cryo-EM) and building upon a wealth of crystallographic structures of phage TerSs, in this review, we take an inventory of known TerSs studied to date. Our analysis suggests that TerS evolved and diversified into a flexible molecular framework that can conserve biological function with minimal sequence and quaternary structure conservation to fit different packaging strategies and environmental conditions.

Molecular Mechanisms That Contribute to Horizontal Transfer of Plasmids by the Bacteriophage SPP1

Natural transformation and viral-mediated transduction are the main avenues of horizontal gene transfer in Firmicutes. Bacillus subtilis SPP1 is a generalized transducing bacteriophage. Using this lytic phage as a model, we have analyzed how viral replication and recombination systems contribute to the transfer of plasmid-borne antibiotic resistances. Phage SPP1 DNA replication relies on essential phage-encoded replisome organizer (G38P), helicase loader (G39P), hexameric replicative helicase (G40P), recombinase (G35P) and in less extent on the partially dispensable 5′→3′ exonuclease (G34.1P), the single-stranded DNA binding protein (G36P) and the Holliday junction resolvase (G44P). Correspondingly, the accumulation of linear concatemeric plasmid DNA, and the formation of transducing particles were blocked in the absence of G35P, G38P, G39P, and G40P, greatly reduced in the G34.1P, G36P mutants, and slightly reduced in G44P mutants. In contrast, establishment of injected linear plasmid DNA in the recipient host was independent of viral-encoded functions. DNA homology between SPP1 and the plasmid, rather than a viral packaging signal, enhanced the accumulation of packagable plasmid DNA. The transfer efficiency was also dependent on plasmid copy number, and rolling-circle plasmids were encapsidated at higher frequencies than theta-type replicating plasmids.

Function and horizontal transfer of the small terminase subunit of the tailed bacteriophage Sf6 DNA packaging nanomotor

Bacteriophage Sf6 DNA packaging series initiate at many locations across a 2kbp region. Our in vivo studies show that Sf6 small terminase subunit (TerS) protein recognizes a specific packaging (pac) site near the center of this region, that this site lies within the portion of the Sf6 gene that encodes the DNA-binding domain of TerS protein, that this domain of the TerS protein is responsible for the imprecision in Sf6 packaging initiation, and that the DNA-binding domain of TerS must be covalently attached to the domain that interacts with the rest of the packaging motor. The TerS DNA-binding domain is self-contained in that it apparently does not interact closely with the rest of the motor and it binds to a recognition site that lies within the DNA that encodes the domain. This arrangement has allowed the horizontal exchange of terS genes among phages to be very successful.

The DNA site utilized by bacteriophage P22 for initiation of DNA packaging

Virion proteins recognize their cognate nucleic acid for encapsidation into virions through recognition of a specific nucleotide sequence contained within that nucleic acid. Viruses like bacteriophage P22, which have partially circularly permuted, double-stranded virion DNAs, encapsidate DNA through processive series of packaging events in which DNA is recognized for packaging only once at the beginning of the series. Thus a single DNA recognition event programmes the encapsidation of multiple virion chromosomes. The protein product of P22 gene 3, a terminase component, is thought to be responsible for this recognition. The site on the P22 genome that is recognized by the gene 3 protein to initiate packaging series is called the pac site. We report here a strategy for assaying pac site activity in vivo, and the utilization of this system to identify and characterize the site genetically. It is an asymmetric site that spans 22 basepairs and is located near the centre of P22 gene 3.

Bacteriophage p22 portal vertex formation in vivo

Bacteriophage with double-stranded, linear DNA genomes package DNA into pre-assembled icosahedral procapsids through a unique vertex. The packaging vertex contains an oligomeric ring of a portal protein that serves as a recognition site for the packaging enzymes, a conduit for DNA translocation, and the site of tail attachment. Previous studies have suggested that the portal protein of bacteriophage P22 is not essential for shell assembly; however, when assembled in the absence of functional portal protein, the assembled heads are not active in vitro packaging assays. In terms of head assembly, this raises an interesting question: how are portal vertices defined during morphogenesis if their incorporation is not a requirement for head assembly? To address this, the P22 portal gene was cloned into an inducible expression vector and transformed into the P22 host Salmonella typhimurium to allow control of the dosage of portal protein during infections. Using pulse-chase radiolabeling, it was determined that the portal protein is recruited into virion during head assembly. Surprisingly, over-expression of the portal protein during wild-type P22 infection caused a dramatic reduction in the yield of infectious virus. The cause of this reduction was traced to two potentially related phenomena. First, excess portal protein caused aberrant head assembly resulting in the formation of T=7 procapsid-like particles (PLPs) with twice the normal amount of portal protein. Second, maturation of the PLPs was blocked during DNA packaging resulting in the accumulation of empty PLPs within the host. In addition to PLPs with normal morphology, smaller heads (apparently T=4) and aberrant spirals were also produced. Interestingly, maturation of the small heads was relatively efficient resulting in the formation of small mature particles that were tailed and contained a head full of DNA. These data suggest that incorporation of portal vertices into heads occurs during growth of the coat lattice at decision points that dictate head assembly fidelity.

The oac gene encoding a lipopolysaccharide O-antigen acetylase maps adjacent to the integrase-encoding gene on the genome of Shigella flexneri bacteriophage Sf6

Lysogens of Shigella flexneri harbouring the temperate bacteriophage, Sf6, have been previously shown to undergo a serotype conversion due to O-acetylation of the O-antigen of the lipopolysaccharide. A partial physical map of the phage genome has been constructed. Analysis of the phage DNA suggests that the phage packages by a headful mechanism and that the mature DNA molecules are terminally redundant. Cloning of the PstI fragments of Sf6 enabled the region encoding the serotype conversion to be localized, showing that this was clearly phage-encoded. The gene was further localized by mutagenesis with Tn5 and the nucleotide sequence of the entire 2693-bp PstI fragment was determined. Two major open reading frames (ORFs) were found capable of encoding proteins of 44.1 and 37.2 kDa. The latter corresponds to the O-antigen acetylase and its gene has been designated oac. The oac gene is capable of converting Sh. flexneri serotypes X, Y, 1a and 4a to 3a, 3b, 1b and 4b, respectively. The Oac protein bears a high degree of homology to the NodX protein of Rhizobium leguminosarum suggesting that it, too, may be a sugar acetylase. The second ORF immediately upstream from oac corresponds to the bacteriophage Sf6 integrase responsible for chromosomal integration and is highly homologous to the integrases of Escherichia coli bacteriophages P4 and phi 80, but less closely related to those of P1, P2, P22, 186 and lambda.

Packaging of transducing DNA by bacteriophage P1

P1 transduces bacterial chromosomal markers with widely differing frequencies. We use quantitative Southern hybridisations here to show that, despite this, most markers are packaged at similar levels. Exceptions are a group of markers near 2 min and another at 90 min which seem to be packaged at levels two- to threefold higher. We thus conclude that certain marker frequency variations in transduction can be explained by differences in packaging level, but that most cannot. The limited range in packaging levels suggests that P1 can initiate the packaging of chromosomal DNA from many sites. This idea is supported by our failure to find any chromosomal sequences with homology to the phage pac site and by the occurrence of hybridising bands which seem to suggest sequential packaging from a large number of specific sites. We eliminate the possibility that chromosomal DNA packaging is the result of endonucleolytic cutting by the P1 res enzyme.

Molecular analysis of the packaging signal in bacteriophage CP-T1 of Vibrio cholerae

We have previously identified a unique site, pac, from which packaging of precursor concatameric viral DNA into proheads starts during the maturation process of bacteriophage CP-T1. The direction of this packaging was determined from restriction enzyme cleavage patterns of CP-T1 DNA. A restriction enzyme generated fragment containing pac was cloned and the surrounding DNA region sequenced. Analysis of the nucleotide sequence revealed numerous repeat regions related to the consensus sequence PuagttGAT.AAT.aa.t. Within the sequenced region an open reading frame encoding a 12260 Mr protein was also identified. This protein appears to share homology with the binding domains of known DNA binding proteins and may represent a putative Pac terminase possessing the specific endonuclease activity required for cleavage at the pac site. Minicell analysis of deletion derivatives of the pac-containing clone revealed a protein of approximately 12,900 Mr encoded within this same region, confirming that this Pac protein is phage encoded.

Selection of bacterial pac sites recognized by Salmonella phage P22

A gene library of chromosomal PstI fragments from Salmonella typhimurium strain DB5575 has been established. By means of phage P22 mediated transduction, ten different clones which contained inserts that promoted plasmid transduction were selected out of a total of about 7,000 clones. Seven of these clones carried inserts that stimulated transduction independently of general and int-promoted recombination and were interpreted as carrying pac analogous signals. The remaining three clones carried inserts that promoted transduction under recombination proficient conditions, whereas transduction occurred at reduced rate in the absence of recombination. These were believed to have short regions of homology with P22 DNA.

In vitro packaging of plasmid DNA oligomers by Salmonella phage P22: independence of the pac site, and evidence for the termination cut in vitro

In vitro packaging experiments with phage P22 using artificially ligated plasmid concatemers have shown that the pac site is not necessary for DNA packaging although in vivo this initiation signal is indispensable. This indicates that the phage-coded protein gp3 also executes other important functions during phage maturation in addition to the recognition of pac, or that its site specificity is lost in vitro. It has been shown previously that gp3 is necessary for in vitro packaging. Further, it was demonstrated that DNA which is only 74% of headful size cannot be packaged. Oversized DNA, however, is cut in vitro to unit length.

Plasmid transduction by Bacillus subtilis bacteriophage SPP1: effects of DNA homology between plasmid and bacteriophage

Any SPP1 DNA restriction fragment cloned into Bacillus subtilis plasmid pC194 or pUB110 increased the transduction frequency of the plasmid by SPP1 100- to 1,000-fold over the transduction level of the plasmid alone. This increment was observed irrespective of whether a fragment contained the SPP1 packaging origin (pac). Furthermore, an SPP1 derivative into whose genome pC194 DNA had been integrated transduced pC194 DNA with a greatly enhanced frequency. Transduction enhancement mediated by DNA-DNA homology between plasmid and SPP1 was independent of the extent of homology (size range analyzed, 0.5 to 3.9 kilobases) and the recombination proficiency of donor or recipient.