Does Tn10 transpose via the cointegrate molecule?

Construction and characterization of Streptococcus suis-Escherichia coli shuttle cloning vectors

pSSU1, a native plasmid of Streptococcus suis DAT1, was used to construct pSET-series shuttle vectors. In addition to the replication function of pSSU1, these vectors contain the multiple cloning sites and lacZ' gene from pUC19, which means that X-gal screening can be used to select recombinants in Escherichia coli. pSET1, pSET2, and pSET3 carry cat, spc, and both of these genes, respectively, as selectable markers. These vectors could be introduced into S. suis, E. coli, Salmonella typhimurium, S. pneumoniae, and S. equi ssp. equi by electrotransformation. The recA gene was cloned from S. suis and sequenced, and this information was used in the construction of a recA mutant of S. suis. Transformation frequencies and/or plasmid stability of all pSET vectors tested were decreased in both S. suis and E. coli recA mutants compared with the parental strains. These results suggested that functional RecA protein improved the maintenance of pSET vectors in both S. suis and E. coli. Moreover, cloning of the functional S. suis recA gene into pSET2 and complementation analysis of the recA mutant were successful in S. suis but not in E. coli. These results showed that pSET vectors are useful tools for cloning and analyzing S. suis genes in S. suis strains directly.

A small cryptic plasmid from Ruminobacter amylophilus NIAH-3 possesses functional mobilization properties

The complete nucleotide sequence of a small cryptic plasmid designated pRAO1, from the Gram-negative ruminal bacterium Ruminobacter amylophilus NIAH-3, was determined. The plasmid is a circular DNA molecule, 2140 bp in size, with a GC content of 40%. Computer-assisted analysis identified three open reading frames (ORFs), one of which, ORF3 (347 amino acids), displayed a high degree of amino acid identity with the Mob proteins involved in conjugative mobilization and interplasmid recombination of plasmids from Gram-positive bacteria. We proved the mobilization properties of pRAO1 in the Escherichia coli system using the coresident IncW broad-host-range conjugative plasmid R388. These data demonstrated, for the first time, the mobilization properties of small cryptic plasmids from Gram-negative inhabitants of the rumen.

Substrate-induced acceleration of N-ethylmaleimide reaction with the Cys-65 mutant of the transposon Tn10-encoded metal-tetracycline/H+ antiporter depends on the interaction of Asp-66 with the substrate

We previously reported that the reaction of [14C]N-ethylmaleimide (NEM) with the S65C mutant of the transposon Tn10-encoded metal-tetracycline/H+ antiporter (TetA(B)) is competitively inhibited by tetracycline [Yamaguchi, A. et al., FEBS Lett. 322 (1993) 201-204]. However, this observation has been revealed to be a mistake. The reaction of [14C]NEM with S65C TetA(B) was significantly and reproducibly accelerated by tetracycline, i.e. not inhibited. When Asp-66 was replaced by Ala, the reaction of NEM with the Cys-65 residue was no longer affected by tetracycline. In contrast, when Arg-70 was replaced by Ala, the acceleration of the reaction was unaltered. The tetracycline acceleration of the reaction to the Cys-65 residue was further stimulated with energization of the membrane on the addition of NADH. On the other hand, the tetracycline-induced acceleration was not observed in the absence of a divalent cation. These observations indicated that the Cys-65 locus is exposed to the medium according to the interaction of a divalent cation-tetracycline chelation complex with Asp-66.

Expression of the Shigella dysenteriae type-1 lipopolysaccharide repeating unit in Escherichia coli K12/Shigella dysenteriae type-1 hybrids

The structures of the polysaccharide part of lipopolysaccharides isolated from eight Escherichia coli K12/Shigella dysenteriae type 1 hybrids have been determined using sugar and methylation analysis plus 1H- and 13C-nuclear magnetic resonance spectroscopy. The hybrids express parts of the S. dysenteriae type 1 O-antigen tetrasaccharide repeating unit because of the presence of pSS3, a plasmid expressing an alpha-galactosyl: lipopolysaccharide transferase and pSS9, a pBR322 plasmid expressing S. dysenteriae type 1 rfb genes. The various classes of hybrids are the result of transposon Tn 1000 insertions in pSS9 inactivating different rfb genes. The following structural elements were found. E. coli K12 (pSS3) and E. coli K12 (pSS3, pSS9-6; a class I hybrid); alpha-D-Galp(1-->3)beta-D-GlcpNAc(1-->. Class IV hybrids: E. coli K12 (pSS3, pSS9-36); (pSS3, pSS9-107) and (pSS3, pSS9-114); alpha-L-Rhap(1-->2)alpha-D-Galp(1-->3)beta-D-GlcpNAc(1-->. Class V hybrids: E. coli K12 (pSS3, pSS9-78) and (pSS3, pSS9-111); alpha-L-Rhap(1-->3)alpha-L-Rhap(1-->2)alpha-D-Galp(1-->3)bet a-D-GlcpNAc(1-->. The structural sequences are identical to those found in the lipopolysaccharide from native S. dysenteriae type 1. In the hybrid strains, the terminal non-reducing GlcNAc residue of the E. coli K12 core is fully substituted by S. dysenteriae type 1 repeating units, or parts thereof.

Influence of ecosystematic factors on survival of Escherichia coli after large-scale release into lake water mesocosms

Mass cultures of an Escherichia coli K-12 strain were released into exposed mesocosms in a eutrophic lake. The release was performed with and without additional input of the E. coli culture medium to stimulate the scenario of leakage of a production fermenter on one hand and to compare the influence of the added organic nutrients with that of the added strain on the other hand. The survival of the introduced strain and the influence on ecological processes in the mesocosms were monitored for 10 weeks after release. For comparison, survival of the strain in microcosms with sterile lake water was also monitored. Survival of the strain was determined by means of immunofluorescence and growth on selective agar medium. In lake mesocosms, E. coli showed a rapid and constant dieback during the first week. After 4 days, cells were mostly restricted to particles, which seemed to provide niches for survival. From the second week onward, survival was improved in mesocosms with culture medium added. In microcosms with sterile lake water, plate counts of E. coli showed a strong decrease within 2 weeks, while total cell numbers remained approximately the same. The rapid elimination of E. coli from the free-water phase of the mesocosms was probably due to the combined effect of the inability to grow in lake water and grazing. The better survival of E. coli (mainly on particles) in mesocosms with added medium was attributed to the medium-induced enhancement of primary production, which was the source of a large quantity of particles. These particles, in turn, may have functioned as niches for prolonged survival as well as transport vehicles for sedimentation of the E. coli cells.

Cloning, sequencing, and expression of the Pseudomonas testosteroni gene encoding 3-oxosteroid delta 1-dehydrogenase

Pseudomonas testosteroni ATCC 17410 is able to grow on testosterone. This strain was mutagenized by Tn5, and 41 mutants defective in the utilization of testosterone were isolated. One of them, called mutant 06, expressed 3-oxosteroid delta 1- and 3-oxosteroid delta 4-5 alpha-dehydrogenases only at low levels. The DNA region around the Tn5 insertion in mutant 06 was cloned into pUC19, and the 1-kbp EcoRI-BamHI segment neighbor to the Tn5 insertion was used to probe DNA from the wild-type strain. The probe hybridized to a 7.8-kbp SalI fragment. Plasmid pTES5, which is a pUC19 derivative containing this 7.8-kbp SalI fragment, was isolated after the screening by the 1-kbp EcoRI-BamHI probe. This plasmid expressed delta 1-dehydrogenase in Escherichia coli cells. The 2.2-kbp KpnI-KpnI segment of pTES5 was subcloned into pUC18, and pTEK21 was constructed. In E. coli containing the lacIq plasmid pRG1 and pTEK21, the expression of delta 1-dehydrogenase was induced by isopropyl-beta-D-thiogalactopyranoside (IPTG). The induced level was about 40 times higher than the induced level in P. testosteroni. Delta 1-Dehydrogenase synthesized in E. coli was localized in the inner membrane fraction. The minicell experiments showed that a 59-kDa polypeptide was synthesized from pTEK21, and this polypeptide was located in the inner membrane fraction. The complete nucleotide sequence of the 2.2-kbp KpnI-KpnI segment of pTEK21 was determined. An open reading frame which encodes a 62.4-kDa polypeptide and which is preceded by a Shine-Dalgarno-like sequence was identified. The first 44 amino acids of the putative product exhibited significant sequence similarity to the N-terminal sequences of lipoamide dehydrogenases.

Stoichiometry of metal-tetracycline/H+ antiport mediated by transposon Tn10-encoded tetracycline resistance protein in Escherichia coli

The tetracycline resistance protein (TetA) endoded by transposon Tn10 mediates the efflux of divalent cation-tetracycline chelating complexes [Yamaguchi, A., Udagawa, T. and Sawai, T. (1990) J. Biol. Chem. 265, 4809-4813]. It was confirmed that protons were antiported with the complexes through an electrically-neutral process because the antiport consumed delta pH but not delta psi. The quantitative relationship between delta pH and delta pTC determined by a flow-dialysis method clearly indicated a 1:1 stoichiometry of the monocationic metal-tetracycline/H+ exchange.

A comparison of intramolecular rearrangements promoted by transposons Tn5 and Tn10

The bacterial transposon Tn10 has previously been shown to move to other genomic sites by a conservative mechanism, whereby the transposon is excised by double-strand breaks and inserted between a pair of staggered nicks at the target. Other transposons, like Tn3, have been shown to transpose by a replicative mechanism that involves symmetrical nicking of the element and formation of the 'Shapiro intermediate', which can mature into either a cointegrate or a simple insert. The situation with respect to Tn5 is unclear; it was originally reported to use a conservative mechanism, but other evidence suggests that the mechanism might be replicative. In this paper, rearrangements of adjacent DNA promoted by Tn10 and Tn5 have been compared using positive selection for galactose-resistance to detect such rearrangements. Tn10 promoted the formation of adjacent deletions (that started from an inside end of Tn10), deletion/inversions and simple IS10 insertions, but no cointegrates. This behaviour is fully consistent with a conservative mechanism. In contrast, Tn5 was found to promote formation of adjacent deletions (that started mainly from an outside end of Tn5), IS50 insertions (that were frequently accompanied by inversions of adjacent DNA) and cointegrates. These characteristics seem compatible with a replicative, rather than a conservative, mode of transposition. Clearly, Tn5 and Tn10 exhibit some significant differences in their transposition. These results, and results of some previous experiments, have been interpreted to mean that Tn5 could use a replicative mechanism for its transposition.

Cloning of the recA gene of Bordetella pertussis and characterization of its product

A recA gene of Bordetella pertussis was identified in a plasmid library by complementation of a recA mutation in E coli and subcloned as a 2.1-kb Sph I DNA fragment. Southern hybridization experiments showed no similarity to the E coli recA gene, but very strong similarity to other Bordetella species. E coli recA mutant cells containing the B pertussis recA gene at high gene dosage were resistant to DNA-damaging agents such as methyl methane sulfonate or 4-nitroquinoline-N-oxide, displayed induction of SOS functions, and were able to promote DNA recombination, but not induction of phage lambda. The latter phenotype distinguishes the B pertussis recA gene product from the corresponding proteins from most other Gram-negative organisms. Amino acid sequence comparisons revealed a high degree of structural conservation between prokaryotic RecA proteins.

Site-specific transposition of insertion sequence IS630

IS630 is a 1.15-kilobase sequence in Shigella sonnei that, unlike many mobile elements, seems not to mediate cointegration between different replicons. To assess its transposition, we constructed composite elements containing inverted copies of IS630 flanking a drug resistance gene. We found that these composite elements transposed to plasmid ColE1 in Escherichia coli. DNA sequencing showed that transposition was, in all cases, to the dinucleotide sequence 5'-TA-3'. There were two preferred insertion sites which corresponded to the TA sequences in the inverted repeats of a 13-base-pair stem region of the [rho]-dependent transcription terminator. IS630 is flanked by TA, and nucleotide substitution by in vitro mutagenesis at these ends did not affect transposition activity of a composite element or its ability to insert preferentially into TA within the 13-base-pair inverted repeat sequences or to duplicate the target sequence.

Orientation of the carboxyl terminus of the transposon Tn10-encoded tetracycline resistance protein in Escherichia coli

A site-directed antibody was generated against a synthetic polypeptide corresponding to the 14 amino acid residues of the carboxyl terminus of the Tn10 TetA protein. The antibody reacted preferentially with inside-out vesicles, rather than right-side-out vesicles, prepared from Escherichia coli cells harboring transposon Tn10. When inside-out vesicles were treated with trypsin, the TetA protein was completely digested in the vicinity of the carboxyl terminus, as judged on immunoblot analysis using the antibody. In contrast, when right-side-out vesicles were treated with trypsin, the TetA protein was hardly digested. These results indicate that the carboxyl terminus of TetA is exposed to the cytoplasmic side of the membrane.

Intramolecular transposition by Tn10

Transposon Tn10 promotes the formation of a circular product containing only transposon sequences. We show that these circles result from an intramolecular transposition reaction in which all of the strand cleavage and ligation events have occurred but newly created transposon/target junctions have not undergone repair. The unligated strand termini at these junctions are those expected according to a simple model in which the target DNA is cleaved by a pair of staggered nicks 9 bp apart, transposon sequences are separated from flanking donor DNA by cleavage at the terminal nucleotides on both strands (at both ends) of the element, and 3' transposon strand ends are ligated to 5' target strand ends. The stability of the unligated junctions suggests that they are protected from cellular processing by transposase and/or host proteins. We propose that the nonreplicative nature of Tn10 transposition is determined by the efficiency with which the nontransferred transposon strand is separated from flanking donor DNA and by the nature of the protein-DNA complexes present at the strand transfer junctions.

Characterization of five genes in the upper-pathway operon of TOL plasmid pWW0 from Pseudomonas putida and identification of the gene products

The upper operon of the TOL plasmid pWW0 of Pseudomonas putida encodes a set of enzymes which transform toluene and xylenes to benzoate and toluates. The genetic organization of the operon was characterized by cloning of the upper operon genes into an expression vector and identification of their products in Escherichia coli maxicells. This analysis showed that the upper operon contains at least five genes in the order of xylC-xylM-xylA-xylB-xylN. Between the promoter of the operon and xylC, there is a 1.7-kilobase-long space of DNA in which no gene function was identified. In contrast, most of the DNA between xylC and xylN consists of coding sequences. The xylC gene encodes the 57-kilodalton benzaldehyde dehydrogenase. The xylM and xylA genes encode 35- and 40-kilodalton polypeptides, respectively, which were shown by genetic complementation tests to be subunits of xylene oxygenase. The structural gene for benzyl alcohol dehydrogenase, xylB, encodes a 40-kilodalton polypeptide. The last gene of this operon is xylN, which synthesizes a 52-kilodalton polypeptide of unknown function.

A simple procedure for transferring genes cloned in Escherichia coli vectors into other gram-negative bacteria: phenotypic analysis and mapping of TOL plasmid gene xylK

A simple method to transfer non-conjugative Escherichia coli plasmids to other Gram-negative bacteria and their maintenance is described. This method involves generation of inverse transposition-mediated cointegrates of the non-conjugative E. coli plasmid with a conjugative IncW broad-host-range plasmid, R388, carrying Tn10. Isolation of such cointegrates was readily effected by conjugal transfer from an E. coli donor containing the two plasmids to an E. coli recipient, with selection for transconjugants expressing a marker of the E. coli plasmid. This method is particularly useful when large series of E. coli vector-based clones need to be expressed in other Gram-negative bacteria to be functionally analysed, either by complementation or recombination. Utility of the method is shown by a functional analysis in Pseudomonas putida of pBR322 hybrid plasmids containing catabolic genes of TOL plasmid pWW0.

Tn10 transposition and circle formation in vitro

We describe a cell-free system that promotes Tn10 transposition and transposon circle formation, a related intramolecular event. Tn10 circle formation in vitro has been characterized in detail, and is shown to require a supercoiled substrate and to proceed in the absence of ATP. The reaction requires Tn10 transposase protein, and either of two E. coli proteins, integration host factor (IHF) and HU, which are small DNA binding proteins that change the conformation of DNA. Tn10 is composed of inverted repeats of insertion sequence IS10. Pair-wise combinations of the IS10 "outside" and "inside" ends mediate distinct classes of rearrangements in vivo, and they exhibit different reaction requirements in vitro. In contrast to the Tn10 reaction, which involves two outside ends, circle formation with two inside ends proceeds with a transposase fraction alone, in the absence of added host factors, and is inhibited by methylation of the dam site within each terminus.

Isolation and characterization of IS elements repeated in the bacterial chromosome

Shigella sonnei contains repetitive sequences, including an insertion element IS1, which can be isolated as double-stranded DNA fragments by DNA denaturation and renaturation and by treatment with S1 nuclease. In this paper, we describe a method of cloning the IS1 fragments prepared by the S1 nuclease digestion technique into phage M13mp8 RFI DNA. Several clones contained IS1, usually with a few additional bases. We isolated and characterized five other repetitive sequences using this method. One sequence, 1264 base-pairs in length, had terminal inverted repeats and contained two open reading frames. This sequence, called IS600, showed about 44% sequence homology with IS3 and was repeated more than 20 times in the Sh. sonnei chromosome. Another sequence (named IS629, 1310 base-pairs in length), which was repeated six times, was found also to be related to IS3 and thus IS600. Two other sequences (named IS630 and IS640, 1159 and 1092 base-pairs in length, respectively), which were repeated approximately ten times, had characteristic terminal inverted repeats and contained a large open reading frame coding for a protein. The inverted repeat sequences of IS630 were similar to the sequence at one end of IS200, a Salmonella-specific IS element. The fifth sequence, repeated ten times in Sh. sonnei, had about 98% sequence homology with a portion of IS2. The method described here can be applied to the isolation of IS or iso-IS elements present in any other bacterial chromosome.

The sequence and function of the recA gene and its protein in Pseudomonas aeruginosa PAO

The recA gene of Pseudomonas aeruginosa has been isolated and its nucleotide sequence has been determined. The coding region of the recA gene has 1038 bp specifying 346 amino acids. The recA protein of P. aeruginosa showed a striking homology with that of Escherichia coli except for the carboxy-terminal region both at the nucleotide and amino acid level. The recA+-carrying plasmids restored the UV sensitivity and recombination ability of several rec mutants of P. aeruginosa. The precise location of the recA gene on the chromosome was deduced from the analysis of R' plasmids.

Gene order of the TOL catabolic plasmid upper pathway operon and oxidation of both toluene and benzyl alcohol by the xylA product

TOL plasmid pWW0 specifies enzymes for the oxidative catabolism of toluene and xylenes. The upper pathway converts the aromatic hydrocarbons to aromatic carboxylic acids via corresponding alcohols and aldehydes and involves three enzymes: xylene oxygenase, benzyl alcohol dehydrogenase, and benzaldehyde dehydrogenase. The synthesis of these enzymes is positively regulated by the product of xylR. Determination of upper pathway enzyme levels in bacteria carrying Tn5 insertion mutant derivatives of plasmid pWW0-161 has shown that the genes for upper pathway enzymes are organized in an operon with the following order: promoter-xylC (benzaldehyde dehydrogenase gene[s])-xylA (xylene oxygenase gene[s])-xylB (benzyl alcohol dehydrogenase gene). Subcloning of the upper pathway genes in a lambda pL promoter-containing vector and analysis of their expression in Escherichia coli K-12 confirmed this order. Two distinct enzymes were found to attack benzyl alcohol, namely, xylene oxygenase and benzyl alcohol dehydrogenase; and their catalytic activities were additive in the conversion of benzyl alcohol to benzaldehyde. The fact that benzyl alcohol is both a product and a substrate of xylene oxygenase indicates that this enzyme has a relaxed substrate specificity.

Genetic evidence that Tn10 transposes by a nonreplicative mechanism

We present genetic evidence that the tetracycline resistance element Tn10 transposes by a nonreplicative mechanism. Heteroduplex Tn10 elements containing three single base pair mismatches were constructed on lambda phage genomes and allowed to transpose from lambda into the bacterial chromosome. Analysis of TetR colonies resulting from such transpositions suggests that information from both strands of the transposing Tn10 element is transmitted faithfully to its transposition product. The simplest interpretation of these results is that the transposing element is excised from the donor molecule and inserted into the target molecule without being replicated. A mismatch 70 base pairs from one end of the transposon is preserved, suggesting that there is little or no replication, even at the termini of the element, during transposition in vivo.

Cloning of the rfb gene region of Shigella dysenteriae 1 and construction of an rfb-rfp gene cassette for the development of lipopolysaccharide-based live anti-dysentery vaccines

Recent studies have shown that determinants for the production of O antigen lipopolysaccharide in Shigella dysenteriae 1 are distributed over two distinct genetic elements, the chromosome and a 9 kb plasmid designated pHW400. In this communication, we describe the cloning of all determinants necessary for S. dysenteriae 1 O antigen production in E. coli K-12 and their combination in a single plasmid. An RP4::miniMu R-prime plasmid, R-prime 40, containing the his-rfb (histidine biosynthesis-lipopolysaccharide biosynthesis) gene region of the Shigella dysenteriae 1 chromosome was generated. E. coli K-12 bacteria containing R-prime 40 and pSS8, a transposon Tn5-tagged derivative of pHW400, produced lipopolysaccharide indistinguishable from that of S. dysenteriae 1. Small DNA fragments containing the rfb gene cluster and the rfp gene were subcloned from R-prime 40 and pSS8 and subsequently combined in vector pACYC184 to produce pSS37. This latter plasmid when introduced by transformation into E. coli K-12 provoked the formation of S. dysenteriae 1 O-specific lipopolysaccharide, a feature that suggests it may be useful in the construction of LPS-based live vaccines against the Shiga bacillus.

Genetic and biochemical analysis of Shigella dysenteriae 1 O antigen polysaccharide biosynthesis in Escherichia coli K-12: 9 kb plasmid of S. dysenteriae 1 determines addition of a galactose residue to the lipopolysaccharide core

Production of the somatic antigen, O-specific polysaccharide of Shigella dysenteriae 1 is determined by the chromosomal rfb gene cluster and the rfp gene located on the 9 kb plasmid pHW400 carried by this organism. When transferred to Escherichia coli K-12, which produces lipopolysaccharide consisting only of core oligosaccharide linked to lipid A, rfp gene-containing plasmids caused modification of the core oligosaccharide leading to the appearance of core molecules with new electrophoretic mobilities. Chemical analysis of the modified core has shown that it is substituted with a galactose residue which is the first sugar of the O-polysaccharide repeat unit.

Genetic and biochemical analysis of Shigella dysenteriae 1 O antigen polysaccharide biosynthesis in Escherichia coli K-12: structure and functions of the rfb gene cluster

The genetic organization and functions of the Shigella dysenteriae 1 rfb gene cluster, which specifies the somatic O antigen in this organism, have been studied in Escherichia coli K-12 by insertion and deletion mutagenesis of pSS9, a pBR322 hybrid containing the Shigella rfb genes. On the basis of the sensitivity/resistance to rough-specific bacteriophage T3 of E. coli K-12 derivatives containing mutant pSS9 plasmids, of the banding patterns and immunoreactivity of LPS isolated from such derivatives and electrophoresed on SDS-polyacrylamide gels, and of the sugar composition of the polysaccharide portion of the LPS determined by chemical analysis, six determinants for O antigen production were identified and localized. At least two determinants are involved in synthesis of TDP-rhamnose and the transfer of a rhamnose residue to the galactose-substituted core. One of these functions is probably TDP-rhamnose synthetase. A third function effects the transfer of a second rhamnose residue to the rha----gal-substituted core. A fourth function, for which evidence was obtained for two determinants (cistrons), is N-acetylglucosamine transferase, whereas a sixth determinant is necessary for extension of the first completed side chain repeat unit to the full O antigen polymer. These results confirmed the previously-determined chemical composition of the S. dysenteriae 1 O antigen and demonstrated that the order of the sugars is glcNAc----rha----rha----gal with gal as the first sugar linked to the core. Evidence was obtained for at least two transcriptional units in the rfb gene cluster and the approximate locations of two promoters are suggested. The detection of new electrophoretic species of LPS that may correspond to LPS biosynthetic intermediates, and the finding on the cell surfaces of structures corresponding to LPS core substituted with one or more O-specific sugars, appear to be novel findings.

Genetic analysis of a relaxed substrate specificity aromatic ring dioxygenase, toluate 1,2-dioxygenase, encoded by TOL plasmid pWW0 of Pseudomonas putida

Toluate 1,2-dioxygenase is the first enzyme of a meta-cleavage pathway for the oxidative catabolism of benzoate and substituted benzoates to Krebs cycle intermediates that is specified by TOL plasmid pWW0 of Pseudomonas putida. A collection of derivatives harbouring Tn1000 insertions and defective in toluate dioxygenase have been isolated from pPL392, a pBR322-based hybrid plasmid carrying the TOL plasmid meta-cleavage pathway operon. In parallel, a series of N-methyl-N'-nitro-N-nitro-soguanidine-induced mutant plasmids defective in this enzyme activity were isolated from pNM72, a pKT231-based hybrid plasmid carrying the same operon. Pairs of mutant plasmids, consisting of one Tn1000 derivative and one nitrosoguanidine-induced derivative, were used for complementation analysis of toluate dioxygenase in Escherichia coli recA bacteria, in which the formation of 2-hydroxymuconic semialdehyde from benzoate was examined. Four cistrons for toluate 1,2-dioxygenase were thus identified. DNA fragments containing nitrosoguanidine-induced mutant cistrons plus the other meta-cleavage operon genes were cloned into pOT5, an R388-based vector, and complementation tests between different nitrosoguanidine-induced mutant cistrons were carried out in Pseudomonas putida cells, this time scoring for growth on p-toluate. This analysis also identified four cistrons. Examination of the products of these cistrons, by means of E. coli minicells containing pPL392 or its Tn1000 insertion derivatives, indicated that the first two cistrons of the operon comprise a single gene, xylX, which encodes a 57 kilodalton protein, and that the third cistron, xylY, encodes a 20 kilodalton protein.

Structural genes for flagellar hook-associated proteins in Salmonella typhimurium

The flaW, flaU, and flaV genes of Salmonella typhimurium LT2 were cloned into pBR322. These genes were mapped on the cloned DNA fragments by restriction endonuclease analysis and construction of the deletion derivatives. Their gene products were identified, by the minicell method, as proteins whose molecular weights were estimated to be 59,000 for the flaW product, 31,000 for the flaU product, and 48,000 for the flaV product. These values are identical to those of three species of hook-associated proteins (HAPs), namely, HAP1, HAP3, and HAP2. Furthermore, antibodies against HAP1, HAP3, and HAP2 specifically reacted with the gene products of flaW, flaU, and flaV, respectively. Therefore, we concluded that they are structural genes for HAPs. The antibodies against HAP1 and HAP3 also specifically reacted with the gene products of flaS and flaT of Escherichia coli, respectively. This indicates that these gene products are HAPs in E. coli. This result is consistent with the demonstration that flaS and flaT of E. coli are functionally homologous with flaW and flaU of S. typhimurium.

Transposition behavior of IS15 and its progenitor IS15-delta: are cointegrates exclusive end products?

We report that the major product of IS15-promoted transposition is a cointegrate. When present in the multicopy plasmid pBR322, IS15 and its progenitor IS15-delta mediate the formation of cointegrates at frequencies of 3.5 X 10(-4) and 2.9 X 10(-5), respectively. We have studied the stability of the cointegrates generated by IS15 and IS15-delta. While these structures are resolved in a rec+ host, they were stable in a rec- host. These observations suggest that neither IS15 nor IS15-delta encode a resolvase and that cointegration is an end product of their transposition process. These properties of IS15-delta and IS15 can explain the transitions from IS15-delta to IS15 and from IS15 to IS15-delta observed in vivo.

Structural and functional analyses of the fosfomycin resistance transposon Tn2921

The fosfomycin resistance transposon Tn2921 is flanked by directly repeated sequences homologous to the Tn10-related insertion sequence IS10. The nonrepeated DNA sequences of Tn2921 can be deleted without affecting the transposition ability of the element, showing that at least one of the direct repeats is an active insertion sequence. Transposition of Tn2921 seems to occur through direct transposition, since cointegrates have not been observed. The evolutionary relatedness of Tn2921 and IS10 is discussed.

The E. coli K-12 chromosome flanked by two IS10 sequences transposes

Transposon are commonly found among prokaryotes and usually range up to 20 kilobases. In this study, we were interested to determine whether a larger DNA segment could transpose. We observed that the E. coli K-12 chromosome, 4,000 kilobases in size, when flanked by two IS10 sequences, could transpose to pACYC177 at a frequency of 10(-8) per cell per generation. We suggest that this transposition event occurs independently of the size and without duplication of the entire DNA sequence flanked by the IS10 elements.