[Detection of genetically engineered plants by polymerase chain reaction (PCR) using the FLAVR SAVR tomato as an example]

Data in support of the detection of genetically modified organisms (GMOs) in food and feed samples

Food and feed samples were randomly collected from different sources, including local and imported materials from the Syrian local market. These included maize, barley, soybean, fresh food samples and raw material. GMO detection was conducted by PCR and nested PCR-based techniques using specific primers for the most used foreign DNA commonly used in genetic transformation procedures, i.e., 35S promoter, T-nos, epsps, cryIA(b) gene and nptII gene. The results revealed for the first time in Syria the presence of GM foods and feeds with glyphosate-resistant trait of P35S promoter and NOS terminator in the imported soybean samples with high frequency (5 out of the 6 imported soybean samples). While, tests showed negative results for the local samples. Also, tests revealed existence of GMOs in two imported maize samples detecting the presence of 35S promoter and nos terminator. Nested PCR results using two sets of primers confirmed our data. The methods applied in the brief data are based on DNA analysis by Polymerase Chain Reaction (PCR). This technique is specific, practical, reproducible and sensitive enough to detect up to 0.1% GMO in food and/or feedstuffs. Furthermore, all of the techniques mentioned are economic and can be applied in Syria and other developing countries. For all these reasons, the DNA-based analysis methods were chosen and preferred over protein-based analysis.

Development of a loop-mediated isothermal amplification (LAMP) assay for rapid and specific detection of common genetically modified organisms (GMOs)

Here, we developed a loop-mediated isothermal amplification (LAMP) assay for 11 common transgenic target DNA in GMOs. Six sets of LAMP primer candidates for each target were designed and their specificity, sensitivity, and reproductivity were evaluated. With the optimized LAMP primers, this LAMP assay was simply run within 45-60 min to detect all these targets in GMOs tested. The sensitivity, specificity, and reproductivity of the LAMP assay were further analyzed in comparison with those of Real-Time PCR. In consistent with real-time PCR, detection of 0.5% GMOs in equivalent background DNA was possible using this LAMP assay for all targets. In comparison with real-time PCR, the LAMP assay showed the same results with simple instruments. Hence, the LAMP assay developed can provide a rapid and simple approach for routine screening as well as specific events detection of many GMOs.

Testing for genetically modified organisms (GMOs): Past, present and future perspectives

This paper presents an overview of GMO testing methodologies and how these have evolved and may evolve in the next decade. Challenges and limitations for the application of the test methods as well as to the interpretation of results produced with the methods are highlighted and discussed, bearing in mind the various interests and competences of the involved stakeholders. To better understand the suitability and limitations of detection methodologies the evolution of transformation processes for creation of GMOs is briefly reviewed.

Comparative evaluation of three different extraction methods for rice (Oryza sativa L.) genomic DNA

Recently, more immediate and precise cultivar-identifying methods targeting the specific and/or introduced gene(s) have been put into practical use for various rice cultivars. However trustworthy and innovative the biotechnological analyses may be, DNA purity and quality do have unpredictable influences upon the identification. Extraction methods of rice DNA have hardly ever been compared in a comprehensive manner. In this study, we investigated extraction characteristics of three methods by using 10 rice cultivars and then examined template availability of rice DNAs thereby extracted. An UV spectrophotometric study with a view toward methods revealed three different facts: The Isoplant II kit method with inhibitor absorption yielded the most DNAs, the Takara kit method with magnetic trapping produced the best DNAs free from contaminative proteins, and the enzymatic digestion method exclusively with enzymatic digestions prepared the best DNAs free from contaminative polysaccharides. Moreover, with a view toward cultivars, an insignificant difference in yield was not entirely bore out, and some difference in cultivar might cause significant difference in yield; however, no significant difference in purity was found among the cultivars used. On the other hand, electrophoretic images of the DNAs from the same cultivars showed considerable differences in quality among the methods. Furthermore, the DNA extracts from certain brands of rice proved really available for cultivar identification by using polymerase chain reaction (PCR) related to sequence-tagged sites. Therefore, this study suggested that these extraction methods may be used as the situation demands and that the DNAs thereby extracted might work successfully even in cultivar-identifying PCRs.

Identification and quantification of three genetically modified insect resistant cotton lines using conventional and TaqMan real-time polymerase chain reaction methods

As the genetically modified organisms (GMOs) labeling policies are issued in many countries, qualitative and quantitative polymerase chain reaction (PCR) techniques are increasingly used for the detection of genetically modified (GM) crops in foods. Qualitative PCR and TaqMan real-time quantitative PCR methods to detect and identify three varieties of insect resistant cotton, i.e., Mon531 cotton (Monsanto Co.) and GK19 and SGK321 cottons (Chinese Academy of Agricultural Sciences), which were approved for commercialization in China, were developed in this paper. Primer pairs specific to inserted DNAs, such as Cowpea trypsin inhibitor (CpTI) gene of SGK321 cotton and the specific junction DNA sequences containing partial Cry1A(c) gene and NOS terminator of Mon531, GK19, and SGK321 cotton varieties were designed to conduct the identified PCR assays. In conventional specific identified PCR assays, the limit of detection (LOD) was 0.05% for Mon531, GK19, or SGK321 in 100 ng of cotton genomic DNA for one reaction. Also, the multiplex PCR method for screening the three GM cottons was also established, which could save time and cost in practical detection. Furthermore, a real-time quantitative PCR assay based on TaqMan chemistry for detection of insect resistant gene, Cry1A(c), was developed. This assay also featured the use of a standard plasmid as a reference molecule, which contained both a specific region of the transgene Cry1A(c) and an endogenous stearoyl-acyl carrier protein desaturase (Sad1) gene of the cotton. In quantitative PCR assay, the quantification range was from 0.01 to 100% in 100 ng of the genome DNA template, and in the detection of 1.0, 3.0, and 5.0% levels of three insect resistant cotton lines, respectively, all of the relative standard deviations (RSDs) were less than 8.2% except for the GM cotton samples with 1.0% Mon531 or GK19, which meant that our real-time PCR assays involving the use of reference molecule were reliable and practical for GM insect resistant cottons quantification. All of these results indicated that our established conventional and TaqMan real-time PCR assays were applicable to detect the three insect resistant cottons qualitatively and quantitatively.

Validation of a cotton-specific gene, Sad1, used as an endogenous reference gene in qualitative and real-time quantitative PCR detection of transgenic cottons

Genetically modified (GM) cotton lines have been approved for commercialization and widely cultivated in many countries, especially in China. As a step towards the development of reliable qualitative and quantitative PCR methods for detecting GM cottons, we report here the validation of the cotton (Gossypium hirsutum) endogenous reference control gene, Sad1, using conventional and real-time (RT)-PCR methods. Both methods were tested on 15 different G. hirsutum cultivars, and identical amplicons were obtained with all of them. No amplicons were observed when DNA samples from three species of genus Gossypium, Arabidopsis thaliana, maize, and soybean and others were used as amplified templates, demonstrating that these two systems are specific for the identification and quantification of G. hirsutum. The results of Southern blot analysis also showed that the Sad1 gene was two copies in these 15 different G. hirsutum cultivars. Furthermore, one multiplex RT-quantitative PCR employing this gene as an endogenous reference gene was designed to quantify the Cry1A(c) gene modified from Bacillus thuringiensis (Bt) in the insect-resistant cottons, such as Mon531 and GK19. The quantification detection limit of the Cry1A(c) and Sad1 genes was as low as 10 pg of genomic DNA. These results indicate that the Sad1 gene can be used as an endogenous reference gene for both qualitative and quantitative PCR detection of GM cottons.

Qualitative and quantitative evaluation of the genomic DNA extracted from GMO and non-GMO foodstuffs with four different extraction methods

The presence of DNA in foodstuffs derived from or containing genetically modified organisms (GMO) is the basic requirement for labeling of GMO foods in Council Directive 2001/18/CE (Off. J. Eur. Communities 2001, L1 06/2). In this work, four different methods for DNA extraction were evaluated and compared. To rank the different methods, the quality and quantity of DNA extracted from standards, containing known percentages of GMO material and from different food products, were considered. The food products analyzed derived from both soybean and maize and were chosen on the basis of the mechanical, technological, and chemical treatment they had been subjected to during processing. Degree of DNA degradation at various stages of food production was evaluated through the amplification of different DNA fragments belonging to the endogenous genes of both maize and soybean. Genomic DNA was extracted from Roundup Ready soybean and maize MON810 standard flours, according to four different methods, and quantified by real-time Polymerase Chain Reaction (PCR), with the aim of determining the influence of the extraction methods on the DNA quantification through real-time PCR.

Detection of Genetically Modified Organisms in Foods by DNA Amplification Techniques

In this article, the different DNA amplification techniques that are being used for detecting genetically modified organisms (GMOs) in foods are examined. This study intends to provide an updated overview (including works published till June 2002) on the principal applications of such techniques together with their main advantages and drawbacks in GMO detection in foods. Some relevant facts on sampling, DNA isolation, and DNA amplification methods are discussed. Moreover; these analytical protocols are discuissed from a quantitative point of view, including the newest investigations on multiplex detection of GMOs in foods and validation of methods.

Detection and quantitation of genetically modified maize (Bt-176 transgenic maize) by applying ligation detection reaction and universal array technology

We have applied the ligation detection reaction (LDR) combined with a universal array approach to the detection and quantitation of the polymerase chain reaction (PCR) amplified cry1A(b) gene from Bt-176 transgenic maize. We demonstrated excellent specificity and high sensitivity. Down to 0.5 fmol (nearly 60 pg) of PCR amplified transgenic material was unequivocally detected with excellent linearity within the 0.1-2.0% range with respect to wild-type maize. We suggest the feasibility of extending the LDR/universal array format to detect in parallel several transgenic sequences that are being developed for food applications.

Quantitation of Bt-176 maize genomic sequences by surface plasmon resonance-based biospecific interaction analysis of multiplex polymerase chain reaction (PCR)

Surface plasmon resonance (SPR) based biosensors have been described for the identification of genetically modified organisms (GMO) by biospecific interaction analysis (BIA). This paper describes the design and testing of an SPR-based BIA protocol for quantitative determinations of GMOs. Biotinylated multiplex Polymerase Chain Reaction (PCR) products from nontransgenic maize as well as maize powders containing 0.5 and 2% genetically modified Bt-176 sequences were immobilized on different flow cells of a sensor chip. After immobilization, different oligonucleotide probes recognizing maize zein and Bt-176 sequences were injected. The results obtained were compared with Southern blot analysis and with quantitative real-time PCR assays. It was demonstrated that sequential injections of Bt-176 and zein probes to sensor chip flow cells containing multiplex PCR products allow discrimination between PCR performed using maize genomic DNA containing 0.5% Bt-176 sequences and that performed using maize genomic DNA containing 2% Bt-176 sequences. The efficiency of SPR-based BIA in discriminating material containing different amounts of Bt-176 maize is comparable to real-time quantitative PCR and much more reliable than Southern blotting, which in the past has been used for semiquantitative purposes. Furthermore, the approach allows the BIA assay to be repeated several times on the same multiplex PCR product immobilized on the sensor chip, after washing and regeneration of the flow cell. Finally, it is emphasized that the presented strategy to quantify GMOs could be proposed for all of the SPR-based, commercially available biosensors. Some of these optical SPR-based biosensors use, instead of flow-based sensor chips, stirred microcuvettes, reducing the costs of the experimentation.

Biosensor technology and surface plasmon resonance for real-time detection of genetically modified Roundup Ready soybean gene sequences

Biospecific interaction analysis (BIA) was performed using surface plasmon resonance (SPR) and biosensor technologies to detect genetically modified Roundup Ready soybean gene sequences. We first immobilized, on SA sensor chips, single-stranded biotinylated oligonucleotides containing soybean lectin and Roundup Ready gene sequences, and the efficiency of hybridization to oligonucleotide probes differing in length was determined. Second, we immobilized biotinylated PCR products from nontransgenic soybeans (genomes carrying only the lectin gene), as well as from genetically modified Roundup Ready soybean, and we injected the oligonucleotide probes. Furthermore, we used the sensor chips carrying either lectin and Roundup Ready soybean PCR products or 21-mer oligonucleotide as probes, and we injected both nonpurified and purified asymmetric PCR products. The results obtained show that 13 and 15 mer oligonucleotides are suitable probes to detect genetically modified Roundup Ready soybean gene sequences (either target oligonucleotides or PCR products) under standard BIA experimental conditions. By contrast, when 11 mer DNA probes were employed, no efficient hybridization was obtained. All the SPR-based formats were found to be useful for detection of Roundup Ready gene sequences, suggesting that these procedures are useful for the real-time monitoring of hybridization between target single-stranded PCR products, obtained by using as substrates DNA isolated from normal or transgenic soybeans, and oligonucleotide or PCR-generated probes, therefore enabling a one-step, nonradioactive protocol to perform detection.

A rapeseed-specific gene, acetyl-CoA carboxylase, can be used as a reference for qualitative and real-time quantitative PCR detection of transgenes from mixed food samples

Polymerase chain reaction (PCR) methods are very useful techniques for the detection and quantification of genetically modified organisms (GMOs) in food samples. These methods rely on the amplification of transgenic sequences and quantification of the transgenic DNA by comparison to an amplified reference gene. Reported here is the development of specific primers for the rapeseed (Brassica napus) BnACCg8 gene and PCR cycling conditions suitable for the use of this sequence as an endogenous reference gene in both qualitative and quantitative PCR assays. Both methods were assayed with 20 different rapeseed varieties, and identical amplification products were obtained with all of them. No amplification products were observed when DNA samples from other Brassica species, Arabidopsis thaliana, maize, and soybean were used as templates, which demonstrates that this system is specific for rapeseed. In real-time quantitative PCR analysis, the detection limit was as low as 1.25 pg of DNA, which indicates that this method is suitable for use in processed food samples which contain very low copies of target DNA.

Genetically modified organisms in food-screening and specific detection by polymerase chain reaction

PCR methods for the detection of genetically modified organisms (GMOs) were developed that can be used for screening purposes and for specific detection of glyphosate-tolerant soybean and insect-resistant maize in food. Primers were designed to amplify parts of the 35S promoter derived from Cauliflower Mosaic Virus, the NOS terminator derived from Agrobacterium tumefaciens and the antibiotic marker gene NPTII (neomycin-phosphotransferase II), to allow for general screening of foods. PCR/hybridization protocols were established for the detection of glyphosate-tolerant RoundUp Ready soybean and insect-resistant Bt-maize. Besides hybridization, confirmation of the results using restriction analysis was also possible. The described methods enabled a highly sensitive and specific detection of GMOs and thus provide a useful tool for routine analysis of raw and processed food products.

Food plant-delivered cholera toxin B subunit for vaccination and immunotolerization

Developments in recombinant DNA technology have enabled molecular biologists to introduce a variety of novel genes into plant species for specific purposes. From crop improvement to vaccine antigen and antibody production, plants are attractive bioreactors for production of recombinant proteins, as their eukaryotic nature often permits appropriate post-translational modification of recombinant proteins to retain native biological activity. The autotrophic growth of plants requires only soil minerals, water, nitrogen, sunlight energy and carbon dioxide for the synthesis of constituent proteins. Furthermore, production of biologically active proteins in food plants provides the advantage of direct delivery through consumption of edible transformed plant tissues. The production of cholera toxin B subunit in potato plants and applications for prevention of infectious and autoimmune disease are explained in this contribution.

PCR-RFLP analysis of mitochondrial DNA: a reliable method for species identification

A method for identification of game species has been developed on the basis of the amplification of a specific part of the mitochondrial genome (tRNA(Glu)/cytochrome b) using the polymerase chain reaction (PCR). To distinguish between several game species, the obtained 464-bp-long PCR products were cut with different restriction endonucleases (RE) resulting in species-specific restriction fragment length polymorphism (RFLP). Even closely related deer species could be distinguished by application of one or two RE. Natural polymorphisms of the target sequence within one species were examined for red deer (Cervus elaphus), and base pair substitutions were identified affecting the RFLP pattern.

Is there any possibility of detecting the use of genetic engineering in processed foods?

To elucidate if there is any possibility to identify highly processed foods as produced through genetic engineering, beer, soya bean oil, processed tomato (ketch-up, paste, pizza tomatoes, peeled tomatoes, soup) and potato (french fries, crisps, mashed potatoes, flour, starch, fried potatoes) products as well as an enzyme preparation (Natuphos) were investigated by PCR. In pizza tomatoes, peeled tomatoes, french fries, fried potatoes, potato flour and potato crisps DNA suitable for PCR was found. Therefore, it is possible to identify these products as produced through genetic engineering. Such an identification is impossible in certain beers (pilsener, export, Nutfield lyte), soya bean oil, tomato soup, potato starch, mashed potatoes and Natuphos since PCR-analysis gave no indication of the presence of DNA in these products. As it was shown by adding Escherichia coli DNA the used method is, in principle, capable of detecting specifically small amounts of DNA in such products.

Polymerase chain reaction (PCR) in the quality and safety assurance of food: detection of soya in processed meat products

A new method for the specific and sensitive detection of soya (Glycine max) in processed meat products has been developed using polymerase chain reaction (PCR) technology. The presence of soya deoxyribonucleic acid (DNA) from several soya protein concentrates was determined with two pairs of specific oligonucleotides yielding a 414-bp (bp = base pair) fragment and an internal 118-bp fragment amplified from the soya lectin Le1 gene. The test detected DNA from textured soya protein concentrates in meat products at a level of 1% and was confirmed by a commercially available enzyme-linked immunosorbent assay (ELISA).