Diversity in surface colonization behavior in marine bacteria

Role of Microbial Interactions across Food-Related Bacteria on Biofilm Population and Biofilm Decontamination by a TiO2-Nanoparticle-Based Surfactant

Microbial interactions play an important role in initial cell adhesion and the endurance of biofilm toward disinfectant stresses. The present study aimed to evaluate the effect of microbial interactions on biofilm formation and the disinfecting activity of an innovative photocatalytic surfactant based on TiO₂ nanoparticles. Listeria monocytogenes, Salmonella Enteritidis, Escherichia coli, Leuconostoc spp., Latilactobacillus sakei, Serratia liquefaciens, Serratia proteomaculans, Citrobacter freundii, Hafnia alvei, Proteus vulgaris, Pseudomonas fragi, and Brochothrix thermosphacta left to form mono- or dual-species biofilms on stainless steel (SS) coupons. The effectiveness of the photocatalytic disinfectant after 2 h of exposure under UV light on biofilm decontamination was evaluated. The effect of one parameter i.e., exposure to UV or disinfectant, was also determined. According to the obtained results, the microbial load of a mature biofilm depended on the different species or dual species that had adhered to the surface, while the presence of other species could affect the biofilm population of a specific microbe (p < 0.05). The disinfectant strengthened the antimicrobial activity of UV, as, in most cases, the remaining biofilm population was below the detection limit of the method. Moreover, the presence of more than one species affected the resistance of the biofilm cells to UV and the disinfectant (p < 0.05). In conclusion, this study confirms that microbial interactions affected biofilm formation and decontamination, and it demonstrates the effectiveness of the surfactant with the photocatalytic TiO₂ agent, suggesting that it could be an alternative agent with which to disinfect contaminated surfaces.

Structure formation in a conserved mass model of a set of individuals interacting with attractive and repulsive forces

We study a set of interacting individuals that conserve their total mass. In order to describe its dynamics we resort to mesoscopic equations of reaction diffusion including currents driven by attractive and repulsive forces. For the mass conservation we consider a linear response parameter that maintains the mass in the vicinity of a optimal value which is determined by the set. We use the reach and intensity of repulsive forces as control parameters. When sweeping a wide range of parameter space we find a great diversity of localized structures, stationary as well as other ones with cyclical and chaotic dynamics. We compare our results with real situations.

Optical Sensing of Microbial Life on Surfaces

The label-free detection of microbial cells attached to a surface is an active field of research. The field is driven by the need to understand and control the growth of biofilms in a number of applications, including basic research in natural environments, industrial facilities, and clinical devices, to name a few. Despite significant progress in the ability to monitor the growth of biofilms and related living cells, the sensitivity and selectivity of such sensors are still a challenge. We believe that among the many different technologies available for monitoring biofilm growth, optical techniques are the most promising, as they afford direct imaging and offer high sensitivity and specificity. Furthermore, as each technique offers different insights into the biofilm growth mechanism, our analysis allows us to provide an overview of the biological processes at play. In addition, we use a set of key parameters to compare state-of-the-art techniques in the field, including a critical assessment of each method, to identify the most promising types of sensors. We highlight the challenges that need to be overcome to improve the characteristics of current biofilm sensor technologies and indicate where further developments are required. In addition, we provide guidelines for selecting a suitable sensor for detecting microbial cells on a surface.

Exopolysaccharide biosynthesis enables mature biofilm formation on abiotic surfaces by Herbaspirillum seropedicae

H. seropedicae associates endophytically and epiphytically with important poaceous crops and is capable of promoting their growth. The molecular mechanisms involved in plant colonization by this microrganism are not fully understood. Exopolysaccharides (EPS) are usually necessary for bacterial attachment to solid surfaces, to other bacteria, and to form biofilms. The role of H. seropedicae SmR1 exopolysaccharide in biofilm formation on both inert and plant substrates was assessed by characterization of a mutant in the espB gene which codes for a glucosyltransferase. The mutant strain was severely affected in EPS production and biofilm formation on glass wool. In contrast, the plant colonization capacity of the mutant strain was not altered when compared to the parental strain. The requirement of EPS for biofilm formation on inert surface was reinforced by the induction of eps genes in biofilms grown on glass and polypropylene. On the other hand, a strong repression of eps genes was observed in H. seropedicae cells adhered to maize roots. Our data suggest that H. seropedicae EPS is a structural component of mature biofilms, but this development stage of biofilm is not achieved during plant colonization.

Fluorescence-based quasicontinuous and in situ monitoring of biofilm formation dynamics in natural marine environments

Analyzing the dynamics of biofilm formation helps to deepen our understanding of surface colonization in natural environments. While methods for screening biofilm formation in the laboratory are well established, studies in marine environments have so far been based upon destructive analysis of individual samples and provide only discontinuous snapshots of biofilm establishment. In order to explore the development of biofilm over time and under various biotic and abiotic conditions, we applied a recently developed optical biofilm sensor to quasicontinuously analyze marine biofilm dynamics in situ. Using this technique in combination with microscope-assisted imaging, we investigated biofilm formation from its beginning to mature multispecies biofilms. In contrast to laboratory studies on biofilm formation, a smooth transition from initial attachment to colony formation and exponential growth could not be observed in the marine environment. Instead, initial attachment was followed by an adaptation phase of low growth and homogeneously distributed solitary bacterial cells. Moreover, we observed a diurnal variation of biofilm signal intensity, suggesting a transient state of biofilm formation of bacteria. Overall, the biofilm formation dynamics could be modeled by three consecutive development stages attributed to initial bacterial attachment, bacterial growth, and attachment and growth of unicellular eukaryotic microorganisms. Additional experiments showed that the presence of seaweed considerably shortened the adaptation phase in comparison with that on control surfaces but yielded similar growth rates. The outlined examples highlight the advantages of a quasicontinuous in situ detection that enabled, for the first time, the exploration of the initial attachment phase and the diurnal variation during biofilm formation in natural ecosystems.

Pseudomonas aeruginosa attachment on QCM-D sensors: the role of cell and surface hydrophobicities

While biofilms are ubiquitous in nature, the mechanism by which they form is still poorly understood. This study investigated the process by which bacteria deposit and, shortly after, attach irreversibly to surfaces by reorienting to create a stronger interaction, which leads to biofilm formation. A model for attachment of Pseudomonas aeruginosa was developed using a quartz crystal microbalance with dissipation monitoring (QCM-D) technology, along with a fluorescent microscope and camera to monitor kinetics of adherence of the cells over time. In this model, the interaction differs depending on the force that dominates between the viscous, inertial, and elastic loads. P. aeruginosa, grown to the midexponential growth phase (hydrophilic) and stationary phase (hydrophobic) and two different surfaces, silica (SiO(2)) and polyvinylidene fluoride (PVDF), which are hydrophilic and hydrophobic, respectively, were used to test the model. The bacteria deposited on both of the sensor surfaces, though on the silica surface the cells reached a steady state where there was no net increase in deposition of bacteria, while the quantity of cells depositing on the PVDF surface continued to increase until the end of the experiments. The change in frequency and dissipation per cell were both positive for each overtone (n), except when the cells and surface are both hydrophilic. In the model three factors, specifically, viscous, inertial, and elastic loads, contribute to the change in frequency and dissipation at each overtone when a cell deposits on a sensor. On the basis of the model, hydrophobic cells were shown to form an elastic connection to either surface, with an increase of elasticity at higher overtones. At lower overtones, hydrophilic cells depositing on the hydrophobic surface were shown to also be elastic, but as the overtone increases the connection between the cells and sensor becomes more viscoelastic. In the case of hydrophilic cells interacting with the hydrophilic surface, the connection is viscous at each overtone measured. It could be inferred that the transformation of the viscoelasticity of the cell-surface connection is due to changes in the orientation of the cells to the surface, which allow the bacteria to attach irreversibly and begin biofilm formation.

Conditioning film and initial biofilm formation on ceramics tiles in the marine environment

The formation of biofilm on surfaces in the marine environment is believed to be an important factor driving colonization and recruitment of some sessile invertebrate communities. The present study follows the process of biofilm buildup on unglazed ceramic tiles deployed into the marine environment in the northern Gulf of Eilat. PCR-DGGE of film eluted from the tile surface indicated the presence of bacteria as early as 2 h after deployment. The makeup of the biofilm bacterial community was dynamic. Bacterial presence was apparent microscopically 6 h after deployment, though a developed biofilm was not observed until 24 h following deployment. Total organic carbon (TOC) data suggest that a conditioning film was built within the first four hours following deployment. During this time period TOC reached the highest level possibly due to adhesion of organics (e.g., sugars, proteins and humic substances) from the water column. We suggest that the primary adhering bacteria, whilst still in the reversible stage of adhesion, utilize the conditioning film as food causing the decrease in TOC. Understanding the dynamics between these primary bacterial settlers is of importance, since they may play a role on the succession of invertebrate species settlement onto artificial surfaces.

The role ofFLO11inSaccharomyces cerevisiaebiofilm development in a laboratory based flow-cell system

A role of the FLO11 in Saccharomyces cerevisiae biofilm development in a flow cell system was examined. We carried out an ectopic FLO11 expression in the wild type (wt) BY4741 strain that has low levels of endogenous FLO11 transcript. In contrast to the nonadhesive wt, the FLO11 overexpression strain (BY4741 FLO11(+)) readily adhered to both liquid-hydrophobic and liquid-hydrophilic solid interfaces and was able to grow as a biofilm monolayer in a flow system. Cellular features associated with FLO11 were examined and found to be consistent with the previous studies conducted in different strains of S. cerevisiae. When grown in suspended liquid culture, BY4741 FLO11(+) formed larger cellular aggregates (clumps), consisting of from five to 60 cells, and displayed an increased cell surface hydrophobicity, without changes in the cell size or growth rate, compared to wt. However, the invasive growth associated with FLO11 expression was not observed in BY4741 FLO11(+). The significance of these findings is discussed in the context of clinically and industrially relevant biofilms.

Biofilms as complex differentiated communities

Prokaryotic biofilms that predominate in a diverse range of ecosystems are often composed of highly structured multispecies communities. Within these communities metabolic activities are integrated, and developmental sequences, not unlike those of multicellular organisms, can be detected. These structural adaptations and interrelationships are made possible by the expression of sets of genes that result in phenotypes that differ profoundly from those of planktonically grown cells of the same species. Molecular and microscopic evidence suggest the existence of a succession of de facto biofilm phenotypes. We submit that complex cell-cell interactions within prokaryotic communities are an ancient characteristic, the development of which was facilitated by the localization of cells at surfaces. In addition to spatial localization, surfaces may have provided the protective niche in which attached cells could create a localized homeostatic environment. In a holistic sense both biofilm and planktonic phenotypes may be viewed as integrated components of prokaryote life.

A biological assay for detection of heterogeneities in the surface hydrophobicity of polymer coatings exposed to the marine environment

Minimally adhesive polymers are being developed as potential coatings for use in the marine environment. A 'bioprobe', the bacterium Psychrobacter sp. strain SW5, was employed to detect heterogeneities in substratum hydrophobicity at a micrometer level, rather than the millimeter level detected by traditional contact angle measurements. This novel assay was based on substratum-induced shifts in bacterial morphology and was used to demonstrate that characteristics of these surfaces can be evaluated for maintenance of parameters such as low surface free energy as well as temporal stability when immersed in water. Immersion of developmental substrata in artificial seawater for up to 90d prior to testing with the bioprobe potentially affects the stability of the designed characteristics of the polymers. It is proposed that the shifts in cell and biofilm morphology results from changes influencing the surface hydrophobicity of the polymers. An unpredicted outcome of this testing was the detection of modifications to coatings inferred by the addition of filler particles. Exposure of coatings to the natural microbial community of seawater revealed colonization characteristics that substantiate the results obtained by using the bioindicator.

Comparison of microcolony formation between Vibrio sp. strain S141 and a flagellum-negative mutant developing on agar and glass substrata

A flagellum-negative mutant, M8.2, of the marine bacterium Vibrio sp. S141 was produced by transposon mutagenesis. Time-lapse video imaging of surface colonisation behaviour and microcolony formation of S141 compared to M8.2 cells was carried out to investigate the role of the flagellum of Vibrio sp. S141 in microcolony formation on agar and glass substrata. On an agar surface, S141 cells formed a tetrad pattern after the first two cell divisions, during initial surface colonisation. Developed microcolonies consisted of tight circular arrangements of cells with infrequent branching of cells from the main body. In contrast, M8.2 cells did not form tetrad patterns and micro-colonies generally showed enhanced branching and did not develop circular arrangements of cells. On a glass surface under flow conditions, S141 cells displayed several types of movement behaviours at the surface which may have assisted microcolony formation. M8.2 cells appeared unable to develop micro-colonies, but rather displayed a behaviour which enabled them to spread out across the substratum. Laser scanning confocal microscopy revealed S141 mature biofilms consisted of characteristic towers of bacterial growth with scattered troughs. The flagellum-negative M8.2 biofilm did not form such architecture, displaying a homogeneous distribution of cells throughout the biofilm and across the entire substratum. Although not required for attachment to the glass substratum, the flagellum was required for alignment as well as specific movement behaviours by S141 cells.

Molecular genetics of bacterial attachment and biofouling

Microbial adhesion to animate or inert surfaces is potentially mediated by nonspecific physical or specific ligand-receptor interactions. Growth and survival of the microbial community or biofilm then depends on adaptation to a series of changing environmental milieux. Within the realm of cell-cell interaction, recent advances suggest that flagella, fimbriae and other protein receptors are essential for bacterial attachment to surfaces. There has also been profound progress in the elucidation of genes and molecules necessary for bacterial attachments to surfaces and subsequent biofilm formation.