Preparation of a pure autologous biodegradable fibrin matrix for tissue engineering

Hybrid Materials for Vascular Applications: A Preliminary In Vitro Assessment

The production of biomedical devices able to appropriately interact with the biological environment is still a great challenge. Synthetic materials are often employed, but they fail to replicate the biological and functional properties of native tissues, leading to a variety of adverse effects. Several commercial products are based on chemically treated xenogeneic tissues: their principal drawback is due to weak mechanical stability and low durability. Recently, decellularization has been proposed to bypass the drawbacks of both synthetic and biological materials. Acellular materials can integrate with host tissues avoiding/mitigating any foreign body response, but they often lack sufficient patency and impermeability. The present paper investigates an innovative approach to the realization of hybrid materials that combine decellularized bovine pericardium with polycarbonate urethanes. These hybrid materials benefit from the superior biocompatibility of the biological tissue and the mechanical properties of the synthetic polymers. They were assessed from physicochemical, structural, mechanical, and biological points of view; their ability to promote cell growth was also investigated. The decellularized pericardium and the polymer appeared to well adhere to each other, and the two sides were distinguishable. The maximum elongation of hybrid materials was mainly affected by the pericardium, which allows for lower elongation than the polymer; this latter, in turn, influenced the maximum strength achieved. The results confirmed the promising features of hybrid materials for the production of vascular grafts able to be repopulated by circulating cells, thus, improving blood compatibility.

Fibrin glue does not promote migration and proliferation of bone marrow derived mesenchymal stem cells in collagenic membranes: an in vitro study

During Autologous Matrix-Induced Chondrogenesis (AMIC), the membrane is often glued into the chondral defect. However, whether fibrin glue influences cells proliferation and migration remain unclear. This study evaluated the impact of fibrin glue addition to biologic membranes loaded with bone marrow-derived mesenchymal stem cells (B-MSCs). A porcine derived collagen membrane (Cartimaix, Matricel GmbH, Germany) was used. B-MSCs were harvested from three different unrelated donors. The membranes were embedded in mounting medium with DAPI (ABCAM, Cambridge, UK) and analysed at 1-, 2-, 3-, 4-, 6-, and at 8-week follow-up. The DAPI ties the DNA of the cell nucleus, emitting blue fluorescence. DAPI/nuclei signals were analysed with fluorescence microscopy at 100-fold magnification. The group without fibrin glue demonstrated greater migration of the B-MSCs within the membrane at week 4 (P < 0.001), 6 (P < 0.001), and 8 (P < 0.001). No difference was found at week 1, 2, and 3. The group without fibrin glue demonstrated greater proliferation of B-MSCs within the membrane. These differences were significant at week 1 (P = 0.02), 2 (P = 0.008), 3 (P = 0.0009), 4 (P < 0.0001), 6 (P < 0.0001), 8 (P < 0.0001). Concluding, in the present setting, the use of fibrin in a collagenic biomembrane impairs B-MSCs proliferation and migration in vitro.

Cartilage Tissue Engineering Approaches Need to Assess Fibrocartilage When Hydrogel Constructs Are Mechanically Loaded

Chondrocytes that are impregnated within hydrogel constructs sense applied mechanical force and can respond by expressing collagens, which are deposited into the extracellular matrix (ECM). The intention of most cartilage tissue engineering is to form hyaline cartilage, but if mechanical stimulation pushes the ratio of collagen type I (Col1) to collagen type II (Col2) in the ECM too high, then fibrocartilage can form instead. With a focus on Col1 and Col2 expression, the first part of this article reviews the latest studies on hyaline cartilage regeneration within hydrogel constructs that are subjected to compression forces (one of the major types of the forces within joints) in vitro. Since the mechanical loading conditions involving compression and other forces in joints are difficult to reproduce in vitro, implantation of hydrogel constructs in vivo is also reviewed, again with a focus on Col1 and Col2 production within the newly formed cartilage. Furthermore, mechanotransduction pathways that may be related to the expression of Col1 and Col2 within chondrocytes are reviewed and examined. Also, two recently-emerged, novel approaches of load-shielding and synchrotron radiation (SR)–based imaging techniques are discussed and highlighted for future applications to the regeneration of hyaline cartilage. Going forward, all cartilage tissue engineering experiments should assess thoroughly whether fibrocartilage or hyaline cartilage is formed.

Human iPS Cell-derived Tissue Engineered Vascular Graft: Recent Advances and Future Directions

Tissue engineered vascular grafts (TEVGs) generated from human primary cells represent a promising vascular interventional therapy. However, generation and application of these TEVGs may be significantly hindered by the limited accessibility, finite expandability, donor-donor functional variation and immune-incompatibility of primary seed cells from donors. Alternatively, human induced pluripotent stem cells (hiPSCs) offer an infinite source to obtain functional vascular cells in large quantity and comparable quality for TEVG construction. To date, TEVGs (hiPSC-TEVGs) with significant mechanical strength and implantability have been generated using hiPSC-derived seed cells. Despite being in its incipient stage, this emerging field of hiPSC-TEVG research has achieved significant progress and presented promising future potential. Meanwhile, a series of challenges pertaining hiPSC differentiation, vascular tissue engineering technologies and future production and application await to be addressed. Herein, we have composed this review to introduce progress in TEVG generation using hiPSCs, summarize the current major challenges, and encapsulate the future directions of research on hiPSC-based TEVGs. Graphical abstract.

The Tissue-Engineered Vascular Graft-Past, Present, and Future

Cardiovascular disease is the leading cause of death worldwide, with this trend predicted to continue for the foreseeable future. Common disorders are associated with the stenosis or occlusion of blood vessels. The preferred treatment for the long-term revascularization of occluded vessels is surgery utilizing vascular grafts, such as coronary artery bypass grafting and peripheral artery bypass grafting. Currently, autologous vessels such as the saphenous vein and internal thoracic artery represent the gold standard grafts for small-diameter vessels (<6 mm), outperforming synthetic alternatives. However, these vessels are of limited availability, require invasive harvest, and are often unsuitable for use. To address this, the development of a tissue-engineered vascular graft (TEVG) has been rigorously pursued. This article reviews the current state of the art of TEVGs. The various approaches being explored to generate TEVGs are described, including scaffold-based methods (using synthetic and natural polymers), the use of decellularized natural matrices, and tissue self-assembly processes, with the results of various in vivo studies, including clinical trials, highlighted. A discussion of the key areas for further investigation, including graft cell source, mechanical properties, hemodynamics, integration, and assessment in animal models, is then presented.

Incorporation of fibrin into a collagen-glycosaminoglycan matrix results in a scaffold with improved mechanical properties and enhanced capacity to resist cell-mediated contraction

Fibrin has many uses as a tissue engineering scaffold, however many in vivo studies have shown a reduction in function resulting from the susceptibility of fibrin to cell-mediated contraction. The overall aim of the present study was to develop and characterise a reinforced natural scaffold using fibrin, collagen and glycosaminoglycan (FCG), and to examine the cell-mediated contraction of this scaffold in comparison to fibrin gels. Through the use of an injection loading technique, a homogenous FCG scaffold was developed. Mechanical testing showed a sixfold increase in compressive modulus and a thirtyfold increase in tensile modulus of fibrin when reinforced with a collagen-glycosaminoglycan backbone structure. Human vascular smooth muscle cells (vSMCs) were successfully incorporated into the FCG scaffold and demonstrated excellent viability over 7 days, while proliferation of these cells also increased significantly. VSMCs were seeded into both FCG and fibrin-only gels at the same seeding density for 7 days and while FCG scaffolds did not demonstrate a reduction in size, fibrin-only gels contracted to 10% of their original diameter. The FCG scaffold, which is composed of natural biomaterials, shows potential for use in applications where dimensional stability is crucial to the functionality of the tissue.

STATEMENT OF SIGNIFICANCE

Fibrin is a versatile scaffold for tissue engineering applications, but its weak mechanical properties leave it susceptible to cell-mediated contraction, meaning the dimensions of the fibrin construct will change over time. We have reinforced fibrin with a collagen glycosaminoglycan matrix and characterised the mechanical properties and bioactivity of the reinforced fibrin (FCG). This is the first scaffold manufactured from all naturally derived materials that resists cell-mediated contraction. In fact, over 7 days, the FCG scaffold fully resisted cell-mediated contraction of vascular smooth muscle cells. This FCG scaffold has many potential applications where natural scaffold materials can encourage regeneration.

The formation of human auricular cartilage from microtic tissue: An in vivo study

OBJECTIVES

This study aimed to isolate, culture-expand and characterize the chondrocytes isolated from microtic cartilage and evaluate its potential as a cell source for ear cartilage reconstruction. Specific attention was to construct the auricular cartilage tissue by using fibrin as scaffold.

STUDY DESIGN

Cell culture experiment with the use of microtic chondrocytes.

DESIGN

Cell culture experiment with the use of microtic chondrocytes.

METHODS

After ear reconstructive surgery at the Universiti Kebangsaan Malaysia Medical Center, chondrocytes were isolated from microtic cartilage. Chondrocytes isolated from the tissue were cultured expanded until passage 4 (P4). Upon confluency at P4, chondrocytes were harvested and tissue engineered constructs were made with human plasma polymerized to fibrin. Constructs formed later is implanted at the dorsal part of nude mice for 8 weeks, followed by post-implantation evaluation with histology staining (Hematoxylin and Eosin (H&E) and Safranin O), immunohistochemistry and RT-PCR for chondrogenic associated genes expression level.

RESULTS

Under gross assessment, the construct after 8 weeks of implantation showed similar physical characteristics that of cartilage. Histological staining showed abundant lacunae cells embedded in extracellular matrix similar to that of native cartilage. Safranin O staining showed positive staining which indicates the presence of proteoglycan-rich matrix. Immunohistochemistry analysis showed the strong positive staining for collagen type II, the specific collagen type in the cartilage. Gene expression quantification showed no significant differences in the expression of chondrogenic gene used which is collagen type I, collagen type II, aggrecan core protein (ACP), elastin and sox9 genes when compared to construct formed from normal auricular tissue.

CONCLUSION

Chondrocytes isolated from microtia cartilage has the potential to be used as an alternative cell source for external ear reconstruction in future clinical application.

Tissue-engineered cartilage: the crossroads of biomaterials, cells and stimulating factors

Damage to cartilage represents one of the most challenging tasks of musculoskeletal therapeutics due to its limited propensity for healing and regenerative capabilities. Lack of current treatments to restore cartilage tissue function has prompted research in this rapidly emerging field of tissue regeneration of functional cartilage tissue substitutes. The development of cartilaginous tissue largely depends on the combination of appropriate biomaterials, cell source, and stimulating factors. Over the years, various biomaterials have been utilized for cartilage repair, but outcomes are far from achieving native cartilage architecture and function. This highlights the need for exploration of suitable biomaterials and stimulating factors for cartilage regeneration. With these perspectives, we aim to present an overview of cartilage tissue engineering with recent progress, development, and major steps taken toward the generation of functional cartilage tissue. In this review, we have discussed the advances and problems in tissue engineering of cartilage with strong emphasis on the utilization of natural polymeric biomaterials, various cell sources, and stimulating factors such as biophysical stimuli, mechanical stimuli, dynamic culture, and growth factors used so far in cartilage regeneration. Finally, we have focused on clinical trials, recent innovations, and future prospects related to cartilage engineering.

Construction of tissue-engineered small-diameter vascular grafts in fibrin scaffolds in 30 days

Tissue-engineered small-diameter vascular grafts have been developed as a promising alternative to native veins or arteries for replacement therapy. However, there is still a crucial need to improve the current approaches to render the tissue-engineered blood vessels more favorable for clinical applications. A completely biological blood vessel (3-mm inner diameter) was constructed by culturing a 50:50 mixture of bovine smooth muscle cells (SMCs) with neonatal human dermal fibroblasts in fibrin gels. After 30 days of culture under pulsatile stretching, the engineered blood vessels demonstrated an average burst pressure of 913.3±150.1 mmHg (n=6), a suture retention (53.3±15.4 g) that is suitable for implantation, and a compliance (3.1%±2.5% per 100 mmHg) that is comparable to native vessels. These engineered grafts contained circumferentially aligned collagen fibers, microfibrils and elastic fibers, and differentiated SMCs, mimicking a native artery. These promising mechanical and biochemical properties were achieved in a very short culture time of 30 days, suggesting the potential of co-culturing SMCs with fibroblasts in fibrin gels to generate functional small-diameter vascular grafts for vascular reconstruction surgery.

Small-diameter vascular tissue engineering

Vascular occlusion remains the leading cause of death in Western countries, despite advances made in balloon angioplasty and conventional surgical intervention. Vascular surgery, such as CABG surgery, arteriovenous shunts, and the treatment of congenital anomalies of the coronary artery and pulmonary tracts, requires biologically responsive vascular substitutes. Autografts, particularly saphenous vein and internal mammary artery, are the gold-standard grafts used to treat vascular occlusions. Prosthetic grafts have been developed as alternatives to autografts, but their low patency owing to short-term and intermediate-term thrombosis still limits their clinical application. Advances in vascular tissue engineering technology-such as self-assembling cell sheets, as well as scaffold-guided and decellularized-matrix approaches-promise to produce responsive, living conduits with properties similar to those of native tissue. Over the past decade, vascular tissue engineering has become one of the fastest-growing areas of research, and is now showing some success in the clinic.

Cartilage tissue engineering of nasal septal chondrocyte-macroaggregates in human demineralized bone matrix

Tissue Engineering is an important method for generating cartilage tissue with isolated autologous cells and the support of biomaterials. In contrast to various gel-like biomaterials, human demineralized bone matrix (DBM) guarantees some biomechanical stability for an application in biomechanically loaded regions. The present study combined for the first time the method of seeding chondrocyte-macroaggregates in DBM for the purpose of cartilage tissue engineering. After isolating human nasal chondrocytes and creating a three-dimensional macroaggregate arrangement, the DBM was cultivated in vitro with the macroaggregates. The interaction of the cells within the DBM was analyzed with respect to cell differentiation and the inhibitory effects of chondrocyte proliferation. In contrast to chondrocyte-macroaggregates in the cell-DBM constructs, morphologically modified cells expressing type I collagen dominated. The redifferentiation of chondrocytes, characterized by the expression of type II collagen, was only found in low amounts in the cell-DBM constructs. Furthermore, caspase 3, a marker for apoptosis, was detected in the chondrocyte-DBM constructs. In another experimental setting, the vitality of chondrocytes as related to culture time and the amount of DBM was analyzed with the BrdU assay. Higher amounts of DBM tended to result in significantly higher proliferation rates of the cells within the first 48 h. After 96 h, the vitality decreased in a dose-dependent fashion. In conclusion, this study provides the proof of concept of chondrocyte-macroaggregates with DBM as an interesting method for the tissue engineering of cartilage. The as-yet insufficient redifferentiation of the chondrocytes and the sporadic initiation of apoptosis will require further investigations.

CARTILAGE TISSUE ENGINEERING

Tissue engineering is a new approach for articular cartilage repair. The aim of the present article was to review the current status of cartilage tissue engineering researches. The scaffold materials used for cartilage tissue engineering, the in vitro, in vivo studies and the clinical trials were all reviewed. Our researches about in vitro cartilage tissue engineering with new type bioactive scaffold and preliminary animal studies results will also be described. The scaffold was tricopolymer made from gelatin, hyaluronan and chondroitin. Chondrocytes seeded in tricopolymer showed in vitro engineered cartilage formation. The engineered cartilage constructs were implanted into knee joints of miniature pigs for animal study.

The evolution of vascular tissue engineering and current state of the art

Dacron® (polyethylene terephthalate) and Goretex® (expanded polytetrafluoroethylene) vascular grafts have been very successful in replacing obstructed blood vessels of large and medium diameters. However, as diameters decrease below 6 mm, these grafts are clearly outperformed by transposed autologous veins and, particularly, arteries. With approximately 8 million individuals with peripheral arterial disease, over 500,000 patients diagnosed with end-stage renal disease, and over 250,000 patients per year undergoing coronary bypass in the USA alone, there is a critical clinical need for a functional small-diameter conduit [Lloyd-Jones et al., Circulation 2010;121:e46-e215]. Over the last decade, we have witnessed a dramatic paradigm shift in cardiovascular tissue engineering that has driven the field away from biomaterial-focused approaches and towards more biology-driven strategies. In this article, we review the preclinical and clinical efforts in the quest for a tissue-engineered blood vessel that is free of permanent synthetic scaffolds but has the mechanical strength to become a successful arterial graft. Special emphasis is given to the tissue engineering by self-assembly (TESA) approach, which has been the only one to reach clinical trials for applications under arterial pressure.

Tissue-engineered small-caliber vascular graft based on a novel biodegradable composite fibrin-polylactide scaffold

Small-caliber vascular grafts (< or =5 mm) constructed from synthetic materials for coronary bypass or peripheral vascular repair below the knee have poor patency rates, while autologous vessels may not be available for harvesting. The present study aimed to create a completely autologous small-caliber vascular graft by utilizing a bioabsorbable, macroporous poly(L/D)lactide 96/4 [P(L/D)LA 96/4] mesh as a support scaffold system combined with an autologous fibrin cell carrier material. A novel molding device was used to integrate a P(L/D)LA 96/4 mesh in the wall of a fibrin-based vascular graft, which was seeded with arterial smooth muscle cells (SMCs)/fibroblasts and subsequently lined with endothelial cells. The mold was connected to a bioreactor circuit for dynamic mechanical conditioning of the graft over a 21-day period. Graft cell phenotype, proliferation, extracellular matrix (ECM) content, and mechanical strength were analyzed. alpha-SMA-positive SMCs and fibroblasts deposited ECM proteins into the graft wall, with a significant increase in both cell number and collagen content over 21 days. A luminal endothelial cell lining was evidenced by vWf staining, while the grafts exhibited supraphysiological burst pressure (>460 mmHg) after dynamic cultivation. The results of our study demonstrated the successful production of an autologous, biodegradable small-caliber vascular graft in vitro, with remodeling capabilities and supraphysiological mechanical properties after 21 days in culture. The approach may be suitable for a variety of clinical applications, including coronary artery and peripheral artery bypass procedures.

Development of a composite degradable/nondegradable tissue-engineered vascular graft

The present study aimed to determine the feasibility of constructing a reinforced autologous vascular graft by combining the advantages of fibrin gel as an autologous cell carrier material with the inherent mechanical strength of an integrated mesh structure. It was hypothesized that the mesh and dynamic culture conditions could be combined to generate mechanically stable and implantable vascular grafts within a shorter cultivation period than traditional methods. A two-step moulding technique was developed to integrate a polyvinylidene fluoride (PVDF) mesh (pore size: 1-2 mm) in the wall of a fibrin-based vascular graft (I.D. 5 mm) seeded with carotid myofibroblasts. The graft was cultured under increasing physiological flow conditions for 2 weeks. Histology, burst strength, and suture retention strength were evaluated. Cell growth and tissue development was excellent within the fibrin gel matrix surrounding the PVDF fibers, and tissue structure demonstrated remarkable similarity to native tissue. The grafts were successfully subjected to physiological flow rates and pressure gradients from the outset, and mechanical properties were enhanced by the mesh structure. Mean suture retention strength of the graft tissue was 6.3 N and the burst strength was 236 mm Hg. Using the vascular composite graft technique, the production of tissue engineered, small-caliber vascular grafts with good mechanical properties within a conditioning period of 14 days is feasible.

Electrospun fibrinogen: Feasibility as a tissue engineering scaffold in a rat cell culture model

Fibrinogen has a well-established tissue engineering track record because of its ability to induce improved cellular interaction and scaffold remodeling compared to synthetic scaffolds. While the feasibility of electrospinning fibrinogen scaffolds of submicron diameter fibers and their mechanical properties have been demonstrated, in vitro cellular interaction has not yet been evaluated. The goal of this study was to demonstrate, based on cellular interaction and scaffold remodeling, that electrospun fibrinogen can be used successfully as a tissue engineering scaffold. Electrospun fibrinogen scaffolds were disinfected, seeded with neonatal rat cardiac fibroblasts, and cultured for 2, 7, and 14 days. Cultures were treated to regulate scaffold degradation by either supplementing serum-containing media with aprotinin or crosslinking the scaffolds with glutaraldehyde vapor. Biocompatibility was assessed through a WST-1 cell proliferation assay. Postculture scaffolds were evaluated by scanning electron microscopy and histology. Cell culture demonstrated that fibroblasts readily migrate into and remodel electrospun fibrinogen scaffolds with deposition of native collagen. Supplementation of culture media with different concentrations of aprotinin-modulated scaffold degradation in a predictable fashion, but glutaraldehyde vapor fixation was less reliable. Based on the observed cellular interactions, there is tremendous potential for electrospun fibrinogen as a tissue engineering scaffold.

Autologous Blood Vessels Engineered from Peripheral Blood Sample

OBJECTIVE

Although many efforts have been made to generate small-diameter (< or =5mm) vascular grafts by means of tissue engineering, improvement in patency and functionality still remains a great challenge. It is our hypothesis that to achieve long-term functionality and patency, not only the complete lining with endothelial cells but also full biocompatibility is essential.

DESIGN

The aim was the development of a conduit from a scaffold and endothelial progenitor cells (EPC) separated from peripheral blood of a single donor.

MATERIALS AND METHODS

EPC and a fibrin preparation were separated from porcine peripheral blood. Fibrin segments were generated seeded with EPC and were perfused in a bioreactor in vitro.

RESULTS

From 100ml blood 12-15 cm long fibrin tubes were successfully generated lined with endothelial-like cells. Seeded tubes showed a remarkable elasticity and burst strength up to 90 mm mercury.

CONCLUSIONS

Stable fibrin tubes were successfully generated completely lined with an endothelium-like monolayer from fibrin and EPC, both isolated from the same volume of blood. Although their stability is not those needed for arterial grafting, our results raise the hope, that with distinct improvements in future studies functional autologous vascular grafts could be engineered from the patient's own blood.

Fibrin Gel-Immobilized Primary Osteoblasts in Calcium Phosphate Bone Cement: In vivo Evaluation with Regard to Application as Injectable Biological Bone Substitute

Osteogenic injectable bone substitutes may be useful for many applications. We developed a novel injectable bone substitute based on osteoblast-fibrin glue suspension and calcium phosphate bone cement (BC). Human osteoblasts were isolated from trabecular bone samples and cultured under standard conditions. Osteoblasts were suspended in fibrinogen solution (FS). BC was cured with thrombin solution. 8 x 4 mm injectable bone discs were prepared using silicon molds and a custom-made applicator device. Discs containing BC, BC/FS, or BC/FS/osteoblasts were implanted subcutaneously into athymic nude mice. After 3, 9 and 24 weeks, specimens were explanted and subjected to morphologic and biomechanical evaluation. In vitro fibrin gel-embedded osteoblasts displayed a differentiated phenotype as evidenced by alkaline phosphatase, collagen type 1 and von Kossa stains. A proportion of osteoblasts appeared morphologically intact over a 3-day in vitro period following application into the BC. BC/FS and BC/FS/osteoblast discs were sparsely infiltrated with vascularized connective tissue. There was no bone formation in implants from all groups. However, positive von Kossa staining only in BC/FS/osteoblast groups suggests engraftment of at least some of the transplanted cells. Biomechanical evaluation demonstrated initial stability of the composites. Young's modulus and maximal load did not differ significantly in the BC/FS and BC/FS/osteoblast groups. The practicability of osteoblast-containing injectable bone could be demonstrated. The dense microstructure and the suboptimal initial vascularization of the composites may explain the lack of bone formation. Modifications with regard to enhanced osteoblast survival are mandatory for a possible application as injectable osteogenic bone replacement system.

Use of a fibrin preparation in the engineering of a vascular graft model

OBJECTIVE

Morphological and functional characterization of cocultured endothelial cells (EC) and myofibroblasts (MFB) seeded on a matrix composed of a fibrin preparation mimicking the microenvironment of a vascular wall.

METHODS

MFB and EC were isolated from human saphenous veins and expanded separately in vitro. MFB were seeded on a composite matrix consisting of a fibrin preparation (with or without transforming growth factor-beta2) and a polyglactin-mesh to form a 3-dimensional structure, which was consecutively reseeded with EC. Seeded matrices were incubated in a bioreactor. Characterization was done including fluorescence staining, live-/dead-assay and immunohistochemistry.

RESULTS

High density cocultures in hierarchical structure mimicking the formation of a vascular wall were obtained with nearly complete coverage of the surface with EC. Distribution of preseeded MFB in a 519+/-27 microm thick layer (day 14) was achieved. Cell viability was shown in fluorescence staining for at least 19 days. In deeper layers, no viable cells could be detected within the fibrin preparation. EC covered the surface, had uniform morphology, and their preserved viability was shown for at least 5 days. No EC-ingrowth was found into the fibrin preparation. Neoformation of the matrix proteins laminin and collagen IV was observed.

CONCLUSION

A structured coculture of MFB and EC was obtained mimicking the formation of a vascular wall with preserved viability utilizing a fibrin preparation. Nutrition problems seem to limit the maximal extent of MFB in the matrix.

Elastic cartilage engineering using novel scaffold architectures in combination with a biomimetic cell carrier

Tissue engineering of an elastic cartilage graft that meets the criterion for both structural and functional integration into host tissue, as well as allowing for a clinically tolerable immune response, is a challenging endeavour. Conventional scaffold technologies have limitations in their ability to design and fabricate complex-shaped matrix architectures of structural and mechanical equivalence to elastic cartilage found in the body. We attempted to investigate the potential of conventionally isolated and passaged chondrocytes (2D environment) when seeded and cultured in combination with a biomimetic hydrogel in a mechanically stable and biomimetic composite matrix to form elastic cartilage within ectopic implantation sites. In vitro cultured scaffold/hydrogel/chondrocytes constructs showed islets of cartilage and mineralized tissue formation within the cell-seeded specimens in both pig and rabbit models. Specimens with no cells seeded showed only vascularized fibrous tissue ingrowth. These studies demonstrated the potential of such scaffold/hydrogel/cell constructs to support chondrogenesis in vivo. However, it also showed that even mechanically stable scaffolds do not allow regeneration of a large mass of structural and functional cartilage within a matrix architecture seeded with 2D passaged chondrocytes in combination with a cell biomimetic carrier. Hence, future experiments will be designed to evaluate an initial 3D culture of chondrocytes, effect on cell phenotype and their subsequent culture within biomimetic 3D scaffold/cell constructs.

Structure of fibrin gels studied by elastic light scattering techniques: dependence of fractal dimension, gel crossover length, fiber diameter, and fiber density on monomer concentration

The concentration dependence of the structure of fibrin gels, formed following fibrinogen activation by thrombin at a constant molar ratio, was investigated by means of elastic light scattering techniques. The scattered intensity distributions were measured in absolute units over a wave-vector range q of about three decades ( approximately 3x10(2)-3x10(5) cm(-1)). A set of gel-characterizing parameters were recovered by accurately fitting the data with a single function recently developed by us [F. Ferri et al., Phys. Rev. E 63, 031401 (2001)], based on a simple structural model. Accordingly, the gels can be described as random networks of fibers of average diameter d and density rho, entangled together to form densely packed and spatially correlated blobs of mass fractal dimension D(m) and average size (or crossover length) xi. As previously done for d, we show here that the recovered xi is also a good approximation of a weight average, namely, d approximately sqrt[<d2>(w)] and xi approximately <xi>(w). By varying the fibrinogen concentration c(F) between 0.034-0.81 mg/ml, gels with 100> or =xi> or =10 microm, 100< or =d< or =200 nm, 1.2< or =D(m)< or =1.4, and constant rho approximately 0.4 mg/ml were obtained. The power-law c(F) dependencies that we found for both xi and d are consistent with the model, provided that the blobs are allowed to partially overlap by a factor eta likewise scaling with c(F) (2> or =eta> or =1). Recasting the whole dataset on a single master curve provided further evidence of the similarity between the structures of all the gels, and confirmed the self-consistency of the model.

Articular cartilage repair: basic science and clinical progress. A review of the current status and prospects

OBJECTIVE

To review the basic scientific status of repair in articular cartilage tissue and to assess the efficiency of current clinical therapies instigated for the treatment of structural lesions generated therein as a result of trauma or during the course of various diseases, notably osteoarthritis (OA). Current scientific trends and possible directions for the future will also be discussed.

DESIGN

A systematic and critical analysis is undertaken, beginning with a description of the spontaneous repair responses in different types of lesion. Surgical interventions aimed at inducing repair without the use of active biologics will then be considered, followed by those involving active biologics and those drawing on autogenic and allogeneic tissue transplantation principles. Cell transplantation approaches, in particular novel tissue engineering concepts, will be critically presented. These will include growth-factor-based biological treatments and gene transfection protocols. A number of technical problems associated with repair interventions, such as tissue integration, tissue retention and the role of mechanical factors, will also be analysed.

RESULTS

A critical analysis of the literature reveals the existence of many novel and very promising biologically-based approaches for the induction of articular cartilage repair, the vast majority of which are still at an experimental phase of development. But prospective, double-blinded clinical trials comparing currently practiced surgical treatments have, unfortunately, not been undertaken.

CONCLUSION

The existence of many new and encouraging biological approaches to cartilage repair justifies the future investment of time and money in this research area, particularly given the extremely high socio-economic importance of such therapeutic strategies in the prevention and treatment of these common joint diseases and traumas. Clinical epidemiological and prospective trials are, moreover, urgently needed for an objective, scientific appraisal of current therapies and future novel approaches.